2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-20 19:23:57 +08:00
linux-next/drivers/char/agp/amd64-agp.c
Linus Torvalds e1ba84597c PCI changes for the v3.14 merge window:
Resource management
     - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas)
     - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu)
     - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas)
     - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas)
     - Enforce bus address limits in resource allocation (Yinghai Lu)
     - Allocate 64-bit BARs above 4G when possible (Yinghai Lu)
     - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu)
 
   PCI device hotplug
     - Major rescan/remove locking update (Rafael J. Wysocki)
     - Make ioapic builtin only (not modular) (Yinghai Lu)
     - Fix release/free issues (Yinghai Lu)
     - Clean up pciehp (Bjorn Helgaas)
     - Announce pciehp slot info during enumeration (Bjorn Helgaas)
 
   MSI
     - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev)
     - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev)
     - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev)
     - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman)
     - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong)
 
   SR-IOV
     - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao)
 
   Virtualization
     - Add support for save/restore of extended capabilities (Alex Williamson)
     - Add Virtual Channel to save/restore support (Alex Williamson)
     - Never treat a VF as a multifunction device (Alex Williamson)
     - Add pci_try_reset_function(), et al (Alex Williamson)
 
   AER
     - Ignore non-PCIe error sources (Betty Dall)
     - Support ACPI HEST error sources for domains other than 0 (Betty Dall)
     - Consolidate HEST error source parsers (Bjorn Helgaas)
     - Add a TLP header print helper (Borislav Petkov)
 
   Freescale i.MX6
     - Remove unnecessary code (Fabio Estevam)
     - Make reset-gpio optional (Marek Vasut)
     - Report "link up" only after link training completes (Marek Vasut)
     - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut)
     - Fix PCIe startup code (Richard Zhu)
 
   Marvell MVEBU
     - Remove duplicate of_clk_get_by_name() call (Andrew Lunn)
     - Drop writes to bridge Secondary Status register (Jason Gunthorpe)
     - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe)
     - Support a bridge with no IO port window (Jason Gunthorpe)
     - Use max_t() instead of max(resource_size_t,) (Jingoo Han)
     - Remove redundant of_match_ptr (Sachin Kamat)
     - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni)
 
   NVIDIA Tegra
     - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower)
 
   Renesas R-Car
     - Add runtime PM support (Valentine Barshak)
     - Fix rcar_pci_probe() return value check (Wei Yongjun)
 
   Synopsys DesignWare
     - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen)
     - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen)
     - Fix missing MSI IRQs (Harro Haan)
     - Add dw_pcie prefix before cfg_read/write (Pratyush Anand)
     - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand)
     - Whitespace cleanup (Jingoo Han)
 
   EISA
     - Call put_device() if device_register() fails (Levente Kurusa)
     - Revert EISA initialization breakage ((Bjorn Helgaas)
 
   Miscellaneous
     - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger)
     - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas)
     - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas)
     - Use dev_is_pci() to identify PCI devices (Yijing Wang)
     - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches)
     - Update documentation 00-INDEX (Erik Ekman)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJS3ujEAAoJEFmIoMA60/r8A4EQAK9AZSUSVNWvlKdC1PrBfT3w
 7fVILx5A4KWsOU8eoFwCPQLrgvUtMltg16yN2tbCjqpKEdrVc36biMO9bwhnXSyZ
 KopHKMWnn0sza/z2H8mcGy+0azGdWcIjcErX/a8WeS6zyWBjm+yzckrHNVpPu4Ca
 SpCBhfgBMjKyIZyLtP6juFSH34S2DfQex4oUSyPC+gjqPy5wW/xw/kBxZfOXl+yU
 P9pQT+geMIc31pETMdG9wd/TT+47YAui4ieSggoVxfVrphCXv6S8mOMCMuQc2bAy
 MHy9uFm1jbvKZZIYrzJ+9HFiiU/6MNiOO3Ygua52xuSp1Zrcjwi2CLD9/QBXbDVs
 pTKU5JIO7q43llkQUpIXTwBvEApSZRhuqzXegsMAYIg4AWmbfm/2fXkfWlQThYMp
 J48blAJZ4t0vhMr9usgwbtdBe8F5euExOxpwH0QMCMABbuu8/B3TLm39+LTcIbsw
 Efgm3N9iUTyiV5fe9Rr62nflhyqXjTevPl4wbZZe4OOdm0MXZY+/BzuNJhg3wyY8
 QKz2J3FB6OR7BCLHCp80l50s5+Ih4F5kmOXwFKjT1D1MFRaNaPDmp9BY6TitU6hg
 zj55gP4c8x6n3alakbf972Yhgs/4oi1va8cZL+pCYWb8nPO5ldaMiT7QBBLUreQV
 BtDtC7u/AFWJ5e73+jVO
 =La1R
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v3.14 merge window:

  Resource management
    - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas)
    - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu)
    - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas)
    - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas)
    - Enforce bus address limits in resource allocation (Yinghai Lu)
    - Allocate 64-bit BARs above 4G when possible (Yinghai Lu)
    - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu)

  PCI device hotplug
    - Major rescan/remove locking update (Rafael J. Wysocki)
    - Make ioapic builtin only (not modular) (Yinghai Lu)
    - Fix release/free issues (Yinghai Lu)
    - Clean up pciehp (Bjorn Helgaas)
    - Announce pciehp slot info during enumeration (Bjorn Helgaas)

  MSI
    - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev)
    - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev)
    - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev)
    - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman)
    - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong)

  SR-IOV
    - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao)

  Virtualization
    - Add support for save/restore of extended capabilities (Alex Williamson)
    - Add Virtual Channel to save/restore support (Alex Williamson)
    - Never treat a VF as a multifunction device (Alex Williamson)
    - Add pci_try_reset_function(), et al (Alex Williamson)

  AER
    - Ignore non-PCIe error sources (Betty Dall)
    - Support ACPI HEST error sources for domains other than 0 (Betty Dall)
    - Consolidate HEST error source parsers (Bjorn Helgaas)
    - Add a TLP header print helper (Borislav Petkov)

  Freescale i.MX6
    - Remove unnecessary code (Fabio Estevam)
    - Make reset-gpio optional (Marek Vasut)
    - Report "link up" only after link training completes (Marek Vasut)
    - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut)
    - Fix PCIe startup code (Richard Zhu)

  Marvell MVEBU
    - Remove duplicate of_clk_get_by_name() call (Andrew Lunn)
    - Drop writes to bridge Secondary Status register (Jason Gunthorpe)
    - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe)
    - Support a bridge with no IO port window (Jason Gunthorpe)
    - Use max_t() instead of max(resource_size_t,) (Jingoo Han)
    - Remove redundant of_match_ptr (Sachin Kamat)
    - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni)

  NVIDIA Tegra
    - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower)

  Renesas R-Car
    - Add runtime PM support (Valentine Barshak)
    - Fix rcar_pci_probe() return value check (Wei Yongjun)

  Synopsys DesignWare
    - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen)
    - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen)
    - Fix missing MSI IRQs (Harro Haan)
    - Add dw_pcie prefix before cfg_read/write (Pratyush Anand)
    - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand)
    - Whitespace cleanup (Jingoo Han)

  EISA
    - Call put_device() if device_register() fails (Levente Kurusa)
    - Revert EISA initialization breakage ((Bjorn Helgaas)

  Miscellaneous
    - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger)
    - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas)
    - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas)
    - Use dev_is_pci() to identify PCI devices (Yijing Wang)
    - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches)
    - Update documentation 00-INDEX (Erik Ekman)"

* tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (119 commits)
  Revert "EISA: Initialize device before its resources"
  Revert "EISA: Log device resources in dmesg"
  vfio-pci: Use pci "try" reset interface
  PCI: Check parent kobject in pci_destroy_dev()
  xen/pcifront: Use global PCI rescan-remove locking
  powerpc/eeh: Use global PCI rescan-remove locking
  PCI: Fix pci_check_and_unmask_intx() comment typos
  PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus()
  MPT / PCI: Use pci_stop_and_remove_bus_device_locked()
  platform / x86: Use global PCI rescan-remove locking
  PCI: hotplug: Use global PCI rescan-remove locking
  pcmcia: Use global PCI rescan-remove locking
  ACPI / hotplug / PCI: Use global PCI rescan-remove locking
  ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug
  PCI: Add global pci_lock_rescan_remove()
  PCI: Cleanup pci.h whitespace
  PCI: Reorder so actual code comes before stubs
  PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0
  ACPICA: Add helper macros to extract bus/segment numbers from HEST table.
  PCI: Make local functions static
  ...
2014-01-22 16:39:28 -08:00

819 lines
20 KiB
C

/*
* Copyright 2001-2003 SuSE Labs.
* Distributed under the GNU public license, v2.
*
* This is a GART driver for the AMD Opteron/Athlon64 on-CPU northbridge.
* It also includes support for the AMD 8151 AGP bridge,
* although it doesn't actually do much, as all the real
* work is done in the northbridge(s).
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/agp_backend.h>
#include <linux/mmzone.h>
#include <asm/page.h> /* PAGE_SIZE */
#include <asm/e820.h>
#include <asm/amd_nb.h>
#include <asm/gart.h>
#include "agp.h"
/* NVIDIA K8 registers */
#define NVIDIA_X86_64_0_APBASE 0x10
#define NVIDIA_X86_64_1_APBASE1 0x50
#define NVIDIA_X86_64_1_APLIMIT1 0x54
#define NVIDIA_X86_64_1_APSIZE 0xa8
#define NVIDIA_X86_64_1_APBASE2 0xd8
#define NVIDIA_X86_64_1_APLIMIT2 0xdc
/* ULi K8 registers */
#define ULI_X86_64_BASE_ADDR 0x10
#define ULI_X86_64_HTT_FEA_REG 0x50
#define ULI_X86_64_ENU_SCR_REG 0x54
static struct resource *aperture_resource;
static bool __initdata agp_try_unsupported = 1;
static int agp_bridges_found;
static void amd64_tlbflush(struct agp_memory *temp)
{
amd_flush_garts();
}
static int amd64_insert_memory(struct agp_memory *mem, off_t pg_start, int type)
{
int i, j, num_entries;
long long tmp;
int mask_type;
struct agp_bridge_data *bridge = mem->bridge;
u32 pte;
num_entries = agp_num_entries();
if (type != mem->type)
return -EINVAL;
mask_type = bridge->driver->agp_type_to_mask_type(bridge, type);
if (mask_type != 0)
return -EINVAL;
/* Make sure we can fit the range in the gatt table. */
/* FIXME: could wrap */
if (((unsigned long)pg_start + mem->page_count) > num_entries)
return -EINVAL;
j = pg_start;
/* gatt table should be empty. */
while (j < (pg_start + mem->page_count)) {
if (!PGE_EMPTY(agp_bridge, readl(agp_bridge->gatt_table+j)))
return -EBUSY;
j++;
}
if (!mem->is_flushed) {
global_cache_flush();
mem->is_flushed = true;
}
for (i = 0, j = pg_start; i < mem->page_count; i++, j++) {
tmp = agp_bridge->driver->mask_memory(agp_bridge,
page_to_phys(mem->pages[i]),
mask_type);
BUG_ON(tmp & 0xffffff0000000ffcULL);
pte = (tmp & 0x000000ff00000000ULL) >> 28;
pte |=(tmp & 0x00000000fffff000ULL);
pte |= GPTE_VALID | GPTE_COHERENT;
writel(pte, agp_bridge->gatt_table+j);
readl(agp_bridge->gatt_table+j); /* PCI Posting. */
}
amd64_tlbflush(mem);
return 0;
}
/*
* This hack alters the order element according
* to the size of a long. It sucks. I totally disown this, even
* though it does appear to work for the most part.
*/
static struct aper_size_info_32 amd64_aperture_sizes[7] =
{
{32, 8192, 3+(sizeof(long)/8), 0 },
{64, 16384, 4+(sizeof(long)/8), 1<<1 },
{128, 32768, 5+(sizeof(long)/8), 1<<2 },
{256, 65536, 6+(sizeof(long)/8), 1<<1 | 1<<2 },
{512, 131072, 7+(sizeof(long)/8), 1<<3 },
{1024, 262144, 8+(sizeof(long)/8), 1<<1 | 1<<3},
{2048, 524288, 9+(sizeof(long)/8), 1<<2 | 1<<3}
};
/*
* Get the current Aperture size from the x86-64.
* Note, that there may be multiple x86-64's, but we just return
* the value from the first one we find. The set_size functions
* keep the rest coherent anyway. Or at least should do.
*/
static int amd64_fetch_size(void)
{
struct pci_dev *dev;
int i;
u32 temp;
struct aper_size_info_32 *values;
dev = node_to_amd_nb(0)->misc;
if (dev==NULL)
return 0;
pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &temp);
temp = (temp & 0xe);
values = A_SIZE_32(amd64_aperture_sizes);
for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) {
if (temp == values[i].size_value) {
agp_bridge->previous_size =
agp_bridge->current_size = (void *) (values + i);
agp_bridge->aperture_size_idx = i;
return values[i].size;
}
}
return 0;
}
/*
* In a multiprocessor x86-64 system, this function gets
* called once for each CPU.
*/
static u64 amd64_configure(struct pci_dev *hammer, u64 gatt_table)
{
u64 aperturebase;
u32 tmp;
u64 aper_base;
/* Address to map to */
pci_read_config_dword(hammer, AMD64_GARTAPERTUREBASE, &tmp);
aperturebase = tmp << 25;
aper_base = (aperturebase & PCI_BASE_ADDRESS_MEM_MASK);
enable_gart_translation(hammer, gatt_table);
return aper_base;
}
static const struct aper_size_info_32 amd_8151_sizes[7] =
{
{2048, 524288, 9, 0x00000000 }, /* 0 0 0 0 0 0 */
{1024, 262144, 8, 0x00000400 }, /* 1 0 0 0 0 0 */
{512, 131072, 7, 0x00000600 }, /* 1 1 0 0 0 0 */
{256, 65536, 6, 0x00000700 }, /* 1 1 1 0 0 0 */
{128, 32768, 5, 0x00000720 }, /* 1 1 1 1 0 0 */
{64, 16384, 4, 0x00000730 }, /* 1 1 1 1 1 0 */
{32, 8192, 3, 0x00000738 } /* 1 1 1 1 1 1 */
};
static int amd_8151_configure(void)
{
unsigned long gatt_bus = virt_to_phys(agp_bridge->gatt_table_real);
int i;
if (!amd_nb_has_feature(AMD_NB_GART))
return 0;
/* Configure AGP regs in each x86-64 host bridge. */
for (i = 0; i < amd_nb_num(); i++) {
agp_bridge->gart_bus_addr =
amd64_configure(node_to_amd_nb(i)->misc, gatt_bus);
}
amd_flush_garts();
return 0;
}
static void amd64_cleanup(void)
{
u32 tmp;
int i;
if (!amd_nb_has_feature(AMD_NB_GART))
return;
for (i = 0; i < amd_nb_num(); i++) {
struct pci_dev *dev = node_to_amd_nb(i)->misc;
/* disable gart translation */
pci_read_config_dword(dev, AMD64_GARTAPERTURECTL, &tmp);
tmp &= ~GARTEN;
pci_write_config_dword(dev, AMD64_GARTAPERTURECTL, tmp);
}
}
static const struct agp_bridge_driver amd_8151_driver = {
.owner = THIS_MODULE,
.aperture_sizes = amd_8151_sizes,
.size_type = U32_APER_SIZE,
.num_aperture_sizes = 7,
.needs_scratch_page = true,
.configure = amd_8151_configure,
.fetch_size = amd64_fetch_size,
.cleanup = amd64_cleanup,
.tlb_flush = amd64_tlbflush,
.mask_memory = agp_generic_mask_memory,
.masks = NULL,
.agp_enable = agp_generic_enable,
.cache_flush = global_cache_flush,
.create_gatt_table = agp_generic_create_gatt_table,
.free_gatt_table = agp_generic_free_gatt_table,
.insert_memory = amd64_insert_memory,
.remove_memory = agp_generic_remove_memory,
.alloc_by_type = agp_generic_alloc_by_type,
.free_by_type = agp_generic_free_by_type,
.agp_alloc_page = agp_generic_alloc_page,
.agp_alloc_pages = agp_generic_alloc_pages,
.agp_destroy_page = agp_generic_destroy_page,
.agp_destroy_pages = agp_generic_destroy_pages,
.agp_type_to_mask_type = agp_generic_type_to_mask_type,
};
/* Some basic sanity checks for the aperture. */
static int agp_aperture_valid(u64 aper, u32 size)
{
if (!aperture_valid(aper, size, 32*1024*1024))
return 0;
/* Request the Aperture. This catches cases when someone else
already put a mapping in there - happens with some very broken BIOS
Maybe better to use pci_assign_resource/pci_enable_device instead
trusting the bridges? */
if (!aperture_resource &&
!(aperture_resource = request_mem_region(aper, size, "aperture"))) {
printk(KERN_ERR PFX "Aperture conflicts with PCI mapping.\n");
return 0;
}
return 1;
}
/*
* W*s centric BIOS sometimes only set up the aperture in the AGP
* bridge, not the northbridge. On AMD64 this is handled early
* in aperture.c, but when IOMMU is not enabled or we run
* on a 32bit kernel this needs to be redone.
* Unfortunately it is impossible to fix the aperture here because it's too late
* to allocate that much memory. But at least error out cleanly instead of
* crashing.
*/
static int fix_northbridge(struct pci_dev *nb, struct pci_dev *agp, u16 cap)
{
u64 aper, nb_aper;
int order = 0;
u32 nb_order, nb_base;
u16 apsize;
pci_read_config_dword(nb, AMD64_GARTAPERTURECTL, &nb_order);
nb_order = (nb_order >> 1) & 7;
pci_read_config_dword(nb, AMD64_GARTAPERTUREBASE, &nb_base);
nb_aper = nb_base << 25;
/* Northbridge seems to contain crap. Try the AGP bridge. */
pci_read_config_word(agp, cap+0x14, &apsize);
if (apsize == 0xffff) {
if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order))
return 0;
return -1;
}
apsize &= 0xfff;
/* Some BIOS use weird encodings not in the AGPv3 table. */
if (apsize & 0xff)
apsize |= 0xf00;
order = 7 - hweight16(apsize);
aper = pci_bus_address(agp, AGP_APERTURE_BAR);
/*
* On some sick chips APSIZE is 0. This means it wants 4G
* so let double check that order, and lets trust the AMD NB settings
*/
if (order >=0 && aper + (32ULL<<(20 + order)) > 0x100000000ULL) {
dev_info(&agp->dev, "aperture size %u MB is not right, using settings from NB\n",
32 << order);
order = nb_order;
}
if (nb_order >= order) {
if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order))
return 0;
}
dev_info(&agp->dev, "aperture from AGP @ %Lx size %u MB\n",
aper, 32 << order);
if (order < 0 || !agp_aperture_valid(aper, (32*1024*1024)<<order))
return -1;
gart_set_size_and_enable(nb, order);
pci_write_config_dword(nb, AMD64_GARTAPERTUREBASE, aper >> 25);
return 0;
}
static int cache_nbs(struct pci_dev *pdev, u32 cap_ptr)
{
int i;
if (amd_cache_northbridges() < 0)
return -ENODEV;
if (!amd_nb_has_feature(AMD_NB_GART))
return -ENODEV;
i = 0;
for (i = 0; i < amd_nb_num(); i++) {
struct pci_dev *dev = node_to_amd_nb(i)->misc;
if (fix_northbridge(dev, pdev, cap_ptr) < 0) {
dev_err(&dev->dev, "no usable aperture found\n");
#ifdef __x86_64__
/* should port this to i386 */
dev_err(&dev->dev, "consider rebooting with iommu=memaper=2 to get a good aperture\n");
#endif
return -1;
}
}
return 0;
}
/* Handle AMD 8151 quirks */
static void amd8151_init(struct pci_dev *pdev, struct agp_bridge_data *bridge)
{
char *revstring;
switch (pdev->revision) {
case 0x01: revstring="A0"; break;
case 0x02: revstring="A1"; break;
case 0x11: revstring="B0"; break;
case 0x12: revstring="B1"; break;
case 0x13: revstring="B2"; break;
case 0x14: revstring="B3"; break;
default: revstring="??"; break;
}
dev_info(&pdev->dev, "AMD 8151 AGP Bridge rev %s\n", revstring);
/*
* Work around errata.
* Chips before B2 stepping incorrectly reporting v3.5
*/
if (pdev->revision < 0x13) {
dev_info(&pdev->dev, "correcting AGP revision (reports 3.5, is really 3.0)\n");
bridge->major_version = 3;
bridge->minor_version = 0;
}
}
static const struct aper_size_info_32 uli_sizes[7] =
{
{256, 65536, 6, 10},
{128, 32768, 5, 9},
{64, 16384, 4, 8},
{32, 8192, 3, 7},
{16, 4096, 2, 6},
{8, 2048, 1, 4},
{4, 1024, 0, 3}
};
static int uli_agp_init(struct pci_dev *pdev)
{
u32 httfea,baseaddr,enuscr;
struct pci_dev *dev1;
int i, ret;
unsigned size = amd64_fetch_size();
dev_info(&pdev->dev, "setting up ULi AGP\n");
dev1 = pci_get_slot (pdev->bus,PCI_DEVFN(0,0));
if (dev1 == NULL) {
dev_info(&pdev->dev, "can't find ULi secondary device\n");
return -ENODEV;
}
for (i = 0; i < ARRAY_SIZE(uli_sizes); i++)
if (uli_sizes[i].size == size)
break;
if (i == ARRAY_SIZE(uli_sizes)) {
dev_info(&pdev->dev, "no ULi size found for %d\n", size);
ret = -ENODEV;
goto put;
}
/* shadow x86-64 registers into ULi registers */
pci_read_config_dword (node_to_amd_nb(0)->misc, AMD64_GARTAPERTUREBASE,
&httfea);
/* if x86-64 aperture base is beyond 4G, exit here */
if ((httfea & 0x7fff) >> (32 - 25)) {
ret = -ENODEV;
goto put;
}
httfea = (httfea& 0x7fff) << 25;
pci_read_config_dword(pdev, ULI_X86_64_BASE_ADDR, &baseaddr);
baseaddr&= ~PCI_BASE_ADDRESS_MEM_MASK;
baseaddr|= httfea;
pci_write_config_dword(pdev, ULI_X86_64_BASE_ADDR, baseaddr);
enuscr= httfea+ (size * 1024 * 1024) - 1;
pci_write_config_dword(dev1, ULI_X86_64_HTT_FEA_REG, httfea);
pci_write_config_dword(dev1, ULI_X86_64_ENU_SCR_REG, enuscr);
ret = 0;
put:
pci_dev_put(dev1);
return ret;
}
static const struct aper_size_info_32 nforce3_sizes[5] =
{
{512, 131072, 7, 0x00000000 },
{256, 65536, 6, 0x00000008 },
{128, 32768, 5, 0x0000000C },
{64, 16384, 4, 0x0000000E },
{32, 8192, 3, 0x0000000F }
};
/* Handle shadow device of the Nvidia NForce3 */
/* CHECK-ME original 2.4 version set up some IORRs. Check if that is needed. */
static int nforce3_agp_init(struct pci_dev *pdev)
{
u32 tmp, apbase, apbar, aplimit;
struct pci_dev *dev1;
int i, ret;
unsigned size = amd64_fetch_size();
dev_info(&pdev->dev, "setting up Nforce3 AGP\n");
dev1 = pci_get_slot(pdev->bus, PCI_DEVFN(11, 0));
if (dev1 == NULL) {
dev_info(&pdev->dev, "can't find Nforce3 secondary device\n");
return -ENODEV;
}
for (i = 0; i < ARRAY_SIZE(nforce3_sizes); i++)
if (nforce3_sizes[i].size == size)
break;
if (i == ARRAY_SIZE(nforce3_sizes)) {
dev_info(&pdev->dev, "no NForce3 size found for %d\n", size);
ret = -ENODEV;
goto put;
}
pci_read_config_dword(dev1, NVIDIA_X86_64_1_APSIZE, &tmp);
tmp &= ~(0xf);
tmp |= nforce3_sizes[i].size_value;
pci_write_config_dword(dev1, NVIDIA_X86_64_1_APSIZE, tmp);
/* shadow x86-64 registers into NVIDIA registers */
pci_read_config_dword (node_to_amd_nb(0)->misc, AMD64_GARTAPERTUREBASE,
&apbase);
/* if x86-64 aperture base is beyond 4G, exit here */
if ( (apbase & 0x7fff) >> (32 - 25) ) {
dev_info(&pdev->dev, "aperture base > 4G\n");
ret = -ENODEV;
goto put;
}
apbase = (apbase & 0x7fff) << 25;
pci_read_config_dword(pdev, NVIDIA_X86_64_0_APBASE, &apbar);
apbar &= ~PCI_BASE_ADDRESS_MEM_MASK;
apbar |= apbase;
pci_write_config_dword(pdev, NVIDIA_X86_64_0_APBASE, apbar);
aplimit = apbase + (size * 1024 * 1024) - 1;
pci_write_config_dword(dev1, NVIDIA_X86_64_1_APBASE1, apbase);
pci_write_config_dword(dev1, NVIDIA_X86_64_1_APLIMIT1, aplimit);
pci_write_config_dword(dev1, NVIDIA_X86_64_1_APBASE2, apbase);
pci_write_config_dword(dev1, NVIDIA_X86_64_1_APLIMIT2, aplimit);
ret = 0;
put:
pci_dev_put(dev1);
return ret;
}
static int agp_amd64_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct agp_bridge_data *bridge;
u8 cap_ptr;
int err;
/* The Highlander principle */
if (agp_bridges_found)
return -ENODEV;
cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP);
if (!cap_ptr)
return -ENODEV;
/* Could check for AGPv3 here */
bridge = agp_alloc_bridge();
if (!bridge)
return -ENOMEM;
if (pdev->vendor == PCI_VENDOR_ID_AMD &&
pdev->device == PCI_DEVICE_ID_AMD_8151_0) {
amd8151_init(pdev, bridge);
} else {
dev_info(&pdev->dev, "AGP bridge [%04x/%04x]\n",
pdev->vendor, pdev->device);
}
bridge->driver = &amd_8151_driver;
bridge->dev = pdev;
bridge->capndx = cap_ptr;
/* Fill in the mode register */
pci_read_config_dword(pdev, bridge->capndx+PCI_AGP_STATUS, &bridge->mode);
if (cache_nbs(pdev, cap_ptr) == -1) {
agp_put_bridge(bridge);
return -ENODEV;
}
if (pdev->vendor == PCI_VENDOR_ID_NVIDIA) {
int ret = nforce3_agp_init(pdev);
if (ret) {
agp_put_bridge(bridge);
return ret;
}
}
if (pdev->vendor == PCI_VENDOR_ID_AL) {
int ret = uli_agp_init(pdev);
if (ret) {
agp_put_bridge(bridge);
return ret;
}
}
pci_set_drvdata(pdev, bridge);
err = agp_add_bridge(bridge);
if (err < 0)
return err;
agp_bridges_found++;
return 0;
}
static void agp_amd64_remove(struct pci_dev *pdev)
{
struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
release_mem_region(virt_to_phys(bridge->gatt_table_real),
amd64_aperture_sizes[bridge->aperture_size_idx].size);
agp_remove_bridge(bridge);
agp_put_bridge(bridge);
agp_bridges_found--;
}
#ifdef CONFIG_PM
static int agp_amd64_suspend(struct pci_dev *pdev, pm_message_t state)
{
pci_save_state(pdev);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
return 0;
}
static int agp_amd64_resume(struct pci_dev *pdev)
{
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
if (pdev->vendor == PCI_VENDOR_ID_NVIDIA)
nforce3_agp_init(pdev);
return amd_8151_configure();
}
#endif /* CONFIG_PM */
static struct pci_device_id agp_amd64_pci_table[] = {
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_AMD,
.device = PCI_DEVICE_ID_AMD_8151_0,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
/* ULi M1689 */
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_AL,
.device = PCI_DEVICE_ID_AL_M1689,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
/* VIA K8T800Pro */
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_K8T800PRO_0,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
/* VIA K8T800 */
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_8385_0,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
/* VIA K8M800 / K8N800 */
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_8380_0,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
/* VIA K8M890 / K8N890 */
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_VT3336,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
/* VIA K8T890 */
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_3238_0,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
/* VIA K8T800/K8M800/K8N800 */
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_838X_1,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
/* NForce3 */
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_NVIDIA,
.device = PCI_DEVICE_ID_NVIDIA_NFORCE3,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_NVIDIA,
.device = PCI_DEVICE_ID_NVIDIA_NFORCE3S,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
/* SIS 755 */
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_SI,
.device = PCI_DEVICE_ID_SI_755,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
/* SIS 760 */
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_SI,
.device = PCI_DEVICE_ID_SI_760,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
/* ALI/ULI M1695 */
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
.class_mask = ~0,
.vendor = PCI_VENDOR_ID_AL,
.device = 0x1695,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
},
{ }
};
MODULE_DEVICE_TABLE(pci, agp_amd64_pci_table);
static const struct pci_device_id agp_amd64_pci_promisc_table[] = {
{ PCI_DEVICE_CLASS(0, 0) },
{ }
};
static struct pci_driver agp_amd64_pci_driver = {
.name = "agpgart-amd64",
.id_table = agp_amd64_pci_table,
.probe = agp_amd64_probe,
.remove = agp_amd64_remove,
#ifdef CONFIG_PM
.suspend = agp_amd64_suspend,
.resume = agp_amd64_resume,
#endif
};
/* Not static due to IOMMU code calling it early. */
int __init agp_amd64_init(void)
{
int err = 0;
if (agp_off)
return -EINVAL;
err = pci_register_driver(&agp_amd64_pci_driver);
if (err < 0)
return err;
if (agp_bridges_found == 0) {
if (!agp_try_unsupported && !agp_try_unsupported_boot) {
printk(KERN_INFO PFX "No supported AGP bridge found.\n");
#ifdef MODULE
printk(KERN_INFO PFX "You can try agp_try_unsupported=1\n");
#else
printk(KERN_INFO PFX "You can boot with agp=try_unsupported\n");
#endif
pci_unregister_driver(&agp_amd64_pci_driver);
return -ENODEV;
}
/* First check that we have at least one AMD64 NB */
if (!pci_dev_present(amd_nb_misc_ids)) {
pci_unregister_driver(&agp_amd64_pci_driver);
return -ENODEV;
}
/* Look for any AGP bridge */
agp_amd64_pci_driver.id_table = agp_amd64_pci_promisc_table;
err = driver_attach(&agp_amd64_pci_driver.driver);
if (err == 0 && agp_bridges_found == 0) {
pci_unregister_driver(&agp_amd64_pci_driver);
err = -ENODEV;
}
}
return err;
}
static int __init agp_amd64_mod_init(void)
{
#ifndef MODULE
if (gart_iommu_aperture)
return agp_bridges_found ? 0 : -ENODEV;
#endif
return agp_amd64_init();
}
static void __exit agp_amd64_cleanup(void)
{
#ifndef MODULE
if (gart_iommu_aperture)
return;
#endif
if (aperture_resource)
release_resource(aperture_resource);
pci_unregister_driver(&agp_amd64_pci_driver);
}
module_init(agp_amd64_mod_init);
module_exit(agp_amd64_cleanup);
MODULE_AUTHOR("Dave Jones <davej@redhat.com>, Andi Kleen");
module_param(agp_try_unsupported, bool, 0);
MODULE_LICENSE("GPL");