mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-24 05:04:00 +08:00
cd354f1ae7
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
536 lines
12 KiB
C
536 lines
12 KiB
C
/*
|
|
* adv7175 - adv7175a video encoder driver version 0.0.3
|
|
*
|
|
* Copyright (C) 1998 Dave Perks <dperks@ibm.net>
|
|
* Copyright (C) 1999 Wolfgang Scherr <scherr@net4you.net>
|
|
* Copyright (C) 2000 Serguei Miridonov <mirsev@cicese.mx>
|
|
* - some corrections for Pinnacle Systems Inc. DC10plus card.
|
|
*
|
|
* Changes by Ronald Bultje <rbultje@ronald.bitfreak.net>
|
|
* - moved over to linux>=2.4.x i2c protocol (9/9/2002)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/major.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/signal.h>
|
|
#include <asm/io.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/page.h>
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/videodev.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
MODULE_DESCRIPTION("Analog Devices ADV7175 video encoder driver");
|
|
MODULE_AUTHOR("Dave Perks");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
#define I2C_NAME(s) (s)->name
|
|
|
|
#include <linux/video_encoder.h>
|
|
|
|
static int debug = 0;
|
|
module_param(debug, int, 0);
|
|
MODULE_PARM_DESC(debug, "Debug level (0-1)");
|
|
|
|
#define dprintk(num, format, args...) \
|
|
do { \
|
|
if (debug >= num) \
|
|
printk(format, ##args); \
|
|
} while (0)
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
struct adv7175 {
|
|
int norm;
|
|
int input;
|
|
int enable;
|
|
int bright;
|
|
int contrast;
|
|
int hue;
|
|
int sat;
|
|
};
|
|
|
|
#define I2C_ADV7175 0xd4
|
|
#define I2C_ADV7176 0x54
|
|
|
|
static char adv7175_name[] = "adv7175";
|
|
static char adv7176_name[] = "adv7176";
|
|
|
|
static char *inputs[] = { "pass_through", "play_back", "color_bar" };
|
|
static char *norms[] = { "PAL", "NTSC", "SECAM->PAL (may not work!)" };
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static inline int
|
|
adv7175_write (struct i2c_client *client,
|
|
u8 reg,
|
|
u8 value)
|
|
{
|
|
return i2c_smbus_write_byte_data(client, reg, value);
|
|
}
|
|
|
|
static inline int
|
|
adv7175_read (struct i2c_client *client,
|
|
u8 reg)
|
|
{
|
|
return i2c_smbus_read_byte_data(client, reg);
|
|
}
|
|
|
|
static int
|
|
adv7175_write_block (struct i2c_client *client,
|
|
const u8 *data,
|
|
unsigned int len)
|
|
{
|
|
int ret = -1;
|
|
u8 reg;
|
|
|
|
/* the adv7175 has an autoincrement function, use it if
|
|
* the adapter understands raw I2C */
|
|
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
|
|
/* do raw I2C, not smbus compatible */
|
|
u8 block_data[32];
|
|
int block_len;
|
|
|
|
while (len >= 2) {
|
|
block_len = 0;
|
|
block_data[block_len++] = reg = data[0];
|
|
do {
|
|
block_data[block_len++] = data[1];
|
|
reg++;
|
|
len -= 2;
|
|
data += 2;
|
|
} while (len >= 2 && data[0] == reg &&
|
|
block_len < 32);
|
|
if ((ret = i2c_master_send(client, block_data,
|
|
block_len)) < 0)
|
|
break;
|
|
}
|
|
} else {
|
|
/* do some slow I2C emulation kind of thing */
|
|
while (len >= 2) {
|
|
reg = *data++;
|
|
if ((ret = adv7175_write(client, reg,
|
|
*data++)) < 0)
|
|
break;
|
|
len -= 2;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
set_subcarrier_freq (struct i2c_client *client,
|
|
int pass_through)
|
|
{
|
|
/* for some reason pass_through NTSC needs
|
|
* a different sub-carrier freq to remain stable. */
|
|
if(pass_through)
|
|
adv7175_write(client, 0x02, 0x00);
|
|
else
|
|
adv7175_write(client, 0x02, 0x55);
|
|
|
|
adv7175_write(client, 0x03, 0x55);
|
|
adv7175_write(client, 0x04, 0x55);
|
|
adv7175_write(client, 0x05, 0x25);
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
// Output filter: S-Video Composite
|
|
|
|
#define MR050 0x11 //0x09
|
|
#define MR060 0x14 //0x0c
|
|
|
|
//---------------------------------------------------------------------------
|
|
|
|
#define TR0MODE 0x46
|
|
#define TR0RST 0x80
|
|
|
|
#define TR1CAPT 0x80
|
|
#define TR1PLAY 0x00
|
|
|
|
static const unsigned char init_common[] = {
|
|
|
|
0x00, MR050, /* MR0, PAL enabled */
|
|
0x01, 0x00, /* MR1 */
|
|
0x02, 0x0c, /* subc. freq. */
|
|
0x03, 0x8c, /* subc. freq. */
|
|
0x04, 0x79, /* subc. freq. */
|
|
0x05, 0x26, /* subc. freq. */
|
|
0x06, 0x40, /* subc. phase */
|
|
|
|
0x07, TR0MODE, /* TR0, 16bit */
|
|
0x08, 0x21, /* */
|
|
0x09, 0x00, /* */
|
|
0x0a, 0x00, /* */
|
|
0x0b, 0x00, /* */
|
|
0x0c, TR1CAPT, /* TR1 */
|
|
0x0d, 0x4f, /* MR2 */
|
|
0x0e, 0x00, /* */
|
|
0x0f, 0x00, /* */
|
|
0x10, 0x00, /* */
|
|
0x11, 0x00, /* */
|
|
};
|
|
|
|
static const unsigned char init_pal[] = {
|
|
0x00, MR050, /* MR0, PAL enabled */
|
|
0x01, 0x00, /* MR1 */
|
|
0x02, 0x0c, /* subc. freq. */
|
|
0x03, 0x8c, /* subc. freq. */
|
|
0x04, 0x79, /* subc. freq. */
|
|
0x05, 0x26, /* subc. freq. */
|
|
0x06, 0x40, /* subc. phase */
|
|
};
|
|
|
|
static const unsigned char init_ntsc[] = {
|
|
0x00, MR060, /* MR0, NTSC enabled */
|
|
0x01, 0x00, /* MR1 */
|
|
0x02, 0x55, /* subc. freq. */
|
|
0x03, 0x55, /* subc. freq. */
|
|
0x04, 0x55, /* subc. freq. */
|
|
0x05, 0x25, /* subc. freq. */
|
|
0x06, 0x1a, /* subc. phase */
|
|
};
|
|
|
|
static int
|
|
adv7175_command (struct i2c_client *client,
|
|
unsigned int cmd,
|
|
void *arg)
|
|
{
|
|
struct adv7175 *encoder = i2c_get_clientdata(client);
|
|
|
|
switch (cmd) {
|
|
|
|
case 0:
|
|
/* This is just for testing!!! */
|
|
adv7175_write_block(client, init_common,
|
|
sizeof(init_common));
|
|
adv7175_write(client, 0x07, TR0MODE | TR0RST);
|
|
adv7175_write(client, 0x07, TR0MODE);
|
|
break;
|
|
|
|
case ENCODER_GET_CAPABILITIES:
|
|
{
|
|
struct video_encoder_capability *cap = arg;
|
|
|
|
cap->flags = VIDEO_ENCODER_PAL |
|
|
VIDEO_ENCODER_NTSC |
|
|
VIDEO_ENCODER_SECAM; /* well, hacky */
|
|
cap->inputs = 2;
|
|
cap->outputs = 1;
|
|
}
|
|
break;
|
|
|
|
case ENCODER_SET_NORM:
|
|
{
|
|
int iarg = *(int *) arg;
|
|
|
|
switch (iarg) {
|
|
|
|
case VIDEO_MODE_NTSC:
|
|
adv7175_write_block(client, init_ntsc,
|
|
sizeof(init_ntsc));
|
|
if (encoder->input == 0)
|
|
adv7175_write(client, 0x0d, 0x4f); // Enable genlock
|
|
adv7175_write(client, 0x07, TR0MODE | TR0RST);
|
|
adv7175_write(client, 0x07, TR0MODE);
|
|
break;
|
|
|
|
case VIDEO_MODE_PAL:
|
|
adv7175_write_block(client, init_pal,
|
|
sizeof(init_pal));
|
|
if (encoder->input == 0)
|
|
adv7175_write(client, 0x0d, 0x4f); // Enable genlock
|
|
adv7175_write(client, 0x07, TR0MODE | TR0RST);
|
|
adv7175_write(client, 0x07, TR0MODE);
|
|
break;
|
|
|
|
case VIDEO_MODE_SECAM: // WARNING! ADV7176 does not support SECAM.
|
|
/* This is an attempt to convert
|
|
* SECAM->PAL (typically it does not work
|
|
* due to genlock: when decoder is in SECAM
|
|
* and encoder in in PAL the subcarrier can
|
|
* not be syncronized with horizontal
|
|
* quency) */
|
|
adv7175_write_block(client, init_pal,
|
|
sizeof(init_pal));
|
|
if (encoder->input == 0)
|
|
adv7175_write(client, 0x0d, 0x49); // Disable genlock
|
|
adv7175_write(client, 0x07, TR0MODE | TR0RST);
|
|
adv7175_write(client, 0x07, TR0MODE);
|
|
break;
|
|
default:
|
|
dprintk(1, KERN_ERR "%s: illegal norm: %d\n",
|
|
I2C_NAME(client), iarg);
|
|
return -EINVAL;
|
|
|
|
}
|
|
dprintk(1, KERN_INFO "%s: switched to %s\n", I2C_NAME(client),
|
|
norms[iarg]);
|
|
encoder->norm = iarg;
|
|
}
|
|
break;
|
|
|
|
case ENCODER_SET_INPUT:
|
|
{
|
|
int iarg = *(int *) arg;
|
|
|
|
/* RJ: *iarg = 0: input is from SAA7110
|
|
*iarg = 1: input is from ZR36060
|
|
*iarg = 2: color bar */
|
|
|
|
switch (iarg) {
|
|
|
|
case 0:
|
|
adv7175_write(client, 0x01, 0x00);
|
|
|
|
if (encoder->norm == VIDEO_MODE_NTSC)
|
|
set_subcarrier_freq(client, 1);
|
|
|
|
adv7175_write(client, 0x0c, TR1CAPT); /* TR1 */
|
|
if (encoder->norm == VIDEO_MODE_SECAM)
|
|
adv7175_write(client, 0x0d, 0x49); // Disable genlock
|
|
else
|
|
adv7175_write(client, 0x0d, 0x4f); // Enable genlock
|
|
adv7175_write(client, 0x07, TR0MODE | TR0RST);
|
|
adv7175_write(client, 0x07, TR0MODE);
|
|
//udelay(10);
|
|
break;
|
|
|
|
case 1:
|
|
adv7175_write(client, 0x01, 0x00);
|
|
|
|
if (encoder->norm == VIDEO_MODE_NTSC)
|
|
set_subcarrier_freq(client, 0);
|
|
|
|
adv7175_write(client, 0x0c, TR1PLAY); /* TR1 */
|
|
adv7175_write(client, 0x0d, 0x49);
|
|
adv7175_write(client, 0x07, TR0MODE | TR0RST);
|
|
adv7175_write(client, 0x07, TR0MODE);
|
|
//udelay(10);
|
|
break;
|
|
|
|
case 2:
|
|
adv7175_write(client, 0x01, 0x80);
|
|
|
|
if (encoder->norm == VIDEO_MODE_NTSC)
|
|
set_subcarrier_freq(client, 0);
|
|
|
|
adv7175_write(client, 0x0d, 0x49);
|
|
adv7175_write(client, 0x07, TR0MODE | TR0RST);
|
|
adv7175_write(client, 0x07, TR0MODE);
|
|
//udelay(10);
|
|
break;
|
|
|
|
default:
|
|
dprintk(1, KERN_ERR "%s: illegal input: %d\n",
|
|
I2C_NAME(client), iarg);
|
|
return -EINVAL;
|
|
|
|
}
|
|
dprintk(1, KERN_INFO "%s: switched to %s\n", I2C_NAME(client),
|
|
inputs[iarg]);
|
|
encoder->input = iarg;
|
|
}
|
|
break;
|
|
|
|
case ENCODER_SET_OUTPUT:
|
|
{
|
|
int *iarg = arg;
|
|
|
|
/* not much choice of outputs */
|
|
if (*iarg != 0) {
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case ENCODER_ENABLE_OUTPUT:
|
|
{
|
|
int *iarg = arg;
|
|
|
|
encoder->enable = !!*iarg;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
/*
|
|
* Generic i2c probe
|
|
* concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
|
|
*/
|
|
static unsigned short normal_i2c[] =
|
|
{ I2C_ADV7175 >> 1, (I2C_ADV7175 >> 1) + 1,
|
|
I2C_ADV7176 >> 1, (I2C_ADV7176 >> 1) + 1,
|
|
I2C_CLIENT_END
|
|
};
|
|
|
|
static unsigned short ignore = I2C_CLIENT_END;
|
|
|
|
static struct i2c_client_address_data addr_data = {
|
|
.normal_i2c = normal_i2c,
|
|
.probe = &ignore,
|
|
.ignore = &ignore,
|
|
};
|
|
|
|
static struct i2c_driver i2c_driver_adv7175;
|
|
|
|
static int
|
|
adv7175_detect_client (struct i2c_adapter *adapter,
|
|
int address,
|
|
int kind)
|
|
{
|
|
int i;
|
|
struct i2c_client *client;
|
|
struct adv7175 *encoder;
|
|
char *dname;
|
|
|
|
dprintk(1,
|
|
KERN_INFO
|
|
"adv7175.c: detecting adv7175 client on address 0x%x\n",
|
|
address << 1);
|
|
|
|
/* Check if the adapter supports the needed features */
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return 0;
|
|
|
|
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
|
|
if (client == 0)
|
|
return -ENOMEM;
|
|
client->addr = address;
|
|
client->adapter = adapter;
|
|
client->driver = &i2c_driver_adv7175;
|
|
if ((client->addr == I2C_ADV7175 >> 1) ||
|
|
(client->addr == (I2C_ADV7175 >> 1) + 1)) {
|
|
dname = adv7175_name;
|
|
} else if ((client->addr == I2C_ADV7176 >> 1) ||
|
|
(client->addr == (I2C_ADV7176 >> 1) + 1)) {
|
|
dname = adv7176_name;
|
|
} else {
|
|
/* We should never get here!!! */
|
|
kfree(client);
|
|
return 0;
|
|
}
|
|
strlcpy(I2C_NAME(client), dname, sizeof(I2C_NAME(client)));
|
|
|
|
encoder = kzalloc(sizeof(struct adv7175), GFP_KERNEL);
|
|
if (encoder == NULL) {
|
|
kfree(client);
|
|
return -ENOMEM;
|
|
}
|
|
encoder->norm = VIDEO_MODE_PAL;
|
|
encoder->input = 0;
|
|
encoder->enable = 1;
|
|
i2c_set_clientdata(client, encoder);
|
|
|
|
i = i2c_attach_client(client);
|
|
if (i) {
|
|
kfree(client);
|
|
kfree(encoder);
|
|
return i;
|
|
}
|
|
|
|
i = adv7175_write_block(client, init_common, sizeof(init_common));
|
|
if (i >= 0) {
|
|
i = adv7175_write(client, 0x07, TR0MODE | TR0RST);
|
|
i = adv7175_write(client, 0x07, TR0MODE);
|
|
i = adv7175_read(client, 0x12);
|
|
dprintk(1, KERN_INFO "%s_attach: rev. %d at 0x%x\n",
|
|
I2C_NAME(client), i & 1, client->addr << 1);
|
|
}
|
|
if (i < 0) {
|
|
dprintk(1, KERN_ERR "%s_attach: init error 0x%x\n",
|
|
I2C_NAME(client), i);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
adv7175_attach_adapter (struct i2c_adapter *adapter)
|
|
{
|
|
dprintk(1,
|
|
KERN_INFO
|
|
"adv7175.c: starting probe for adapter %s (0x%x)\n",
|
|
I2C_NAME(adapter), adapter->id);
|
|
return i2c_probe(adapter, &addr_data, &adv7175_detect_client);
|
|
}
|
|
|
|
static int
|
|
adv7175_detach_client (struct i2c_client *client)
|
|
{
|
|
struct adv7175 *encoder = i2c_get_clientdata(client);
|
|
int err;
|
|
|
|
err = i2c_detach_client(client);
|
|
if (err) {
|
|
return err;
|
|
}
|
|
|
|
kfree(encoder);
|
|
kfree(client);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* ----------------------------------------------------------------------- */
|
|
|
|
static struct i2c_driver i2c_driver_adv7175 = {
|
|
.driver = {
|
|
.name = "adv7175", /* name */
|
|
},
|
|
|
|
.id = I2C_DRIVERID_ADV7175,
|
|
|
|
.attach_adapter = adv7175_attach_adapter,
|
|
.detach_client = adv7175_detach_client,
|
|
.command = adv7175_command,
|
|
};
|
|
|
|
static int __init
|
|
adv7175_init (void)
|
|
{
|
|
return i2c_add_driver(&i2c_driver_adv7175);
|
|
}
|
|
|
|
static void __exit
|
|
adv7175_exit (void)
|
|
{
|
|
i2c_del_driver(&i2c_driver_adv7175);
|
|
}
|
|
|
|
module_init(adv7175_init);
|
|
module_exit(adv7175_exit);
|