mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 06:34:11 +08:00
2261e0e6e3
Move parts of the core and debug suspend code into the plat-s3c for use with the new s3c64xx code. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
361 lines
8.8 KiB
C
361 lines
8.8 KiB
C
/* linux/arch/arm/plat-s3c24xx/pm.c
|
|
*
|
|
* Copyright (c) 2004,2006 Simtec Electronics
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
*
|
|
* S3C24XX Power Manager (Suspend-To-RAM) support
|
|
*
|
|
* See Documentation/arm/Samsung-S3C24XX/Suspend.txt for more information
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
* Parts based on arch/arm/mach-pxa/pm.c
|
|
*
|
|
* Thanks to Dimitry Andric for debugging
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/time.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <plat/regs-serial.h>
|
|
#include <mach/regs-clock.h>
|
|
#include <mach/regs-gpio.h>
|
|
#include <mach/regs-mem.h>
|
|
#include <mach/regs-irq.h>
|
|
|
|
#include <asm/mach/time.h>
|
|
|
|
#include <plat/pm.h>
|
|
|
|
#define PFX "s3c24xx-pm: "
|
|
|
|
static struct sleep_save core_save[] = {
|
|
SAVE_ITEM(S3C2410_LOCKTIME),
|
|
SAVE_ITEM(S3C2410_CLKCON),
|
|
|
|
/* we restore the timings here, with the proviso that the board
|
|
* brings the system up in an slower, or equal frequency setting
|
|
* to the original system.
|
|
*
|
|
* if we cannot guarantee this, then things are going to go very
|
|
* wrong here, as we modify the refresh and both pll settings.
|
|
*/
|
|
|
|
SAVE_ITEM(S3C2410_BWSCON),
|
|
SAVE_ITEM(S3C2410_BANKCON0),
|
|
SAVE_ITEM(S3C2410_BANKCON1),
|
|
SAVE_ITEM(S3C2410_BANKCON2),
|
|
SAVE_ITEM(S3C2410_BANKCON3),
|
|
SAVE_ITEM(S3C2410_BANKCON4),
|
|
SAVE_ITEM(S3C2410_BANKCON5),
|
|
|
|
#ifndef CONFIG_CPU_FREQ
|
|
SAVE_ITEM(S3C2410_CLKDIVN),
|
|
SAVE_ITEM(S3C2410_MPLLCON),
|
|
SAVE_ITEM(S3C2410_REFRESH),
|
|
#endif
|
|
SAVE_ITEM(S3C2410_UPLLCON),
|
|
SAVE_ITEM(S3C2410_CLKSLOW),
|
|
};
|
|
|
|
static struct gpio_sleep {
|
|
void __iomem *base;
|
|
unsigned int gpcon;
|
|
unsigned int gpdat;
|
|
unsigned int gpup;
|
|
} gpio_save[] = {
|
|
[0] = {
|
|
.base = S3C2410_GPACON,
|
|
},
|
|
[1] = {
|
|
.base = S3C2410_GPBCON,
|
|
},
|
|
[2] = {
|
|
.base = S3C2410_GPCCON,
|
|
},
|
|
[3] = {
|
|
.base = S3C2410_GPDCON,
|
|
},
|
|
[4] = {
|
|
.base = S3C2410_GPECON,
|
|
},
|
|
[5] = {
|
|
.base = S3C2410_GPFCON,
|
|
},
|
|
[6] = {
|
|
.base = S3C2410_GPGCON,
|
|
},
|
|
[7] = {
|
|
.base = S3C2410_GPHCON,
|
|
},
|
|
};
|
|
|
|
static struct sleep_save misc_save[] = {
|
|
SAVE_ITEM(S3C2410_DCLKCON),
|
|
};
|
|
|
|
|
|
/* s3c_pm_check_resume_pin
|
|
*
|
|
* check to see if the pin is configured correctly for sleep mode, and
|
|
* make any necessary adjustments if it is not
|
|
*/
|
|
|
|
static void s3c_pm_check_resume_pin(unsigned int pin, unsigned int irqoffs)
|
|
{
|
|
unsigned long irqstate;
|
|
unsigned long pinstate;
|
|
int irq = s3c2410_gpio_getirq(pin);
|
|
|
|
if (irqoffs < 4)
|
|
irqstate = s3c_irqwake_intmask & (1L<<irqoffs);
|
|
else
|
|
irqstate = s3c_irqwake_eintmask & (1L<<irqoffs);
|
|
|
|
pinstate = s3c2410_gpio_getcfg(pin);
|
|
|
|
if (!irqstate) {
|
|
if (pinstate == S3C2410_GPIO_IRQ)
|
|
S3C_PMDBG("Leaving IRQ %d (pin %d) enabled\n", irq, pin);
|
|
} else {
|
|
if (pinstate == S3C2410_GPIO_IRQ) {
|
|
S3C_PMDBG("Disabling IRQ %d (pin %d)\n", irq, pin);
|
|
s3c2410_gpio_cfgpin(pin, S3C2410_GPIO_INPUT);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* s3c_pm_configure_extint
|
|
*
|
|
* configure all external interrupt pins
|
|
*/
|
|
|
|
void s3c_pm_configure_extint(void)
|
|
{
|
|
int pin;
|
|
|
|
/* for each of the external interrupts (EINT0..EINT15) we
|
|
* need to check wether it is an external interrupt source,
|
|
* and then configure it as an input if it is not
|
|
*/
|
|
|
|
for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
|
|
s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
|
|
}
|
|
|
|
for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
|
|
s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
|
|
}
|
|
}
|
|
|
|
/* offsets for CON/DAT/UP registers */
|
|
|
|
#define OFFS_CON (S3C2410_GPACON - S3C2410_GPACON)
|
|
#define OFFS_DAT (S3C2410_GPADAT - S3C2410_GPACON)
|
|
#define OFFS_UP (S3C2410_GPBUP - S3C2410_GPBCON)
|
|
|
|
/* s3c_pm_save_gpios()
|
|
*
|
|
* Save the state of the GPIOs
|
|
*/
|
|
|
|
void s3c_pm_save_gpios(void)
|
|
{
|
|
struct gpio_sleep *gps = gpio_save;
|
|
unsigned int gpio;
|
|
|
|
for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
|
|
void __iomem *base = gps->base;
|
|
|
|
gps->gpcon = __raw_readl(base + OFFS_CON);
|
|
gps->gpdat = __raw_readl(base + OFFS_DAT);
|
|
|
|
if (gpio > 0)
|
|
gps->gpup = __raw_readl(base + OFFS_UP);
|
|
|
|
}
|
|
}
|
|
|
|
/* Test whether the given masked+shifted bits of an GPIO configuration
|
|
* are one of the SFN (special function) modes. */
|
|
|
|
static inline int is_sfn(unsigned long con)
|
|
{
|
|
return (con == 2 || con == 3);
|
|
}
|
|
|
|
/* Test if the given masked+shifted GPIO configuration is an input */
|
|
|
|
static inline int is_in(unsigned long con)
|
|
{
|
|
return con == 0;
|
|
}
|
|
|
|
/* Test if the given masked+shifted GPIO configuration is an output */
|
|
|
|
static inline int is_out(unsigned long con)
|
|
{
|
|
return con == 1;
|
|
}
|
|
|
|
/**
|
|
* s3c2410_pm_restore_gpio() - restore the given GPIO bank
|
|
* @index: The number of the GPIO bank being resumed.
|
|
* @gps: The sleep confgiuration for the bank.
|
|
*
|
|
* Restore one of the GPIO banks that was saved during suspend. This is
|
|
* not as simple as once thought, due to the possibility of glitches
|
|
* from the order that the CON and DAT registers are set in.
|
|
*
|
|
* The three states the pin can be are {IN,OUT,SFN} which gives us 9
|
|
* combinations of changes to check. Three of these, if the pin stays
|
|
* in the same configuration can be discounted. This leaves us with
|
|
* the following:
|
|
*
|
|
* { IN => OUT } Change DAT first
|
|
* { IN => SFN } Change CON first
|
|
* { OUT => SFN } Change CON first, so new data will not glitch
|
|
* { OUT => IN } Change CON first, so new data will not glitch
|
|
* { SFN => IN } Change CON first
|
|
* { SFN => OUT } Change DAT first, so new data will not glitch [1]
|
|
*
|
|
* We do not currently deal with the UP registers as these control
|
|
* weak resistors, so a small delay in change should not need to bring
|
|
* these into the calculations.
|
|
*
|
|
* [1] this assumes that writing to a pin DAT whilst in SFN will set the
|
|
* state for when it is next output.
|
|
*/
|
|
|
|
static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps)
|
|
{
|
|
void __iomem *base = gps->base;
|
|
unsigned long gps_gpcon = gps->gpcon;
|
|
unsigned long gps_gpdat = gps->gpdat;
|
|
unsigned long old_gpcon;
|
|
unsigned long old_gpdat;
|
|
unsigned long old_gpup = 0x0;
|
|
unsigned long gpcon;
|
|
int nr;
|
|
|
|
old_gpcon = __raw_readl(base + OFFS_CON);
|
|
old_gpdat = __raw_readl(base + OFFS_DAT);
|
|
|
|
if (base == S3C2410_GPACON) {
|
|
/* GPACON only has one bit per control / data and no PULLUPs.
|
|
* GPACON[x] = 0 => Output, 1 => SFN */
|
|
|
|
/* first set all SFN bits to SFN */
|
|
|
|
gpcon = old_gpcon | gps->gpcon;
|
|
__raw_writel(gpcon, base + OFFS_CON);
|
|
|
|
/* now set all the other bits */
|
|
|
|
__raw_writel(gps_gpdat, base + OFFS_DAT);
|
|
__raw_writel(gps_gpcon, base + OFFS_CON);
|
|
} else {
|
|
unsigned long old, new, mask;
|
|
unsigned long change_mask = 0x0;
|
|
|
|
old_gpup = __raw_readl(base + OFFS_UP);
|
|
|
|
/* Create a change_mask of all the items that need to have
|
|
* their CON value changed before their DAT value, so that
|
|
* we minimise the work between the two settings.
|
|
*/
|
|
|
|
for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
|
|
old = (old_gpcon & mask) >> nr;
|
|
new = (gps_gpcon & mask) >> nr;
|
|
|
|
/* If there is no change, then skip */
|
|
|
|
if (old == new)
|
|
continue;
|
|
|
|
/* If both are special function, then skip */
|
|
|
|
if (is_sfn(old) && is_sfn(new))
|
|
continue;
|
|
|
|
/* Change is IN => OUT, do not change now */
|
|
|
|
if (is_in(old) && is_out(new))
|
|
continue;
|
|
|
|
/* Change is SFN => OUT, do not change now */
|
|
|
|
if (is_sfn(old) && is_out(new))
|
|
continue;
|
|
|
|
/* We should now be at the case of IN=>SFN,
|
|
* OUT=>SFN, OUT=>IN, SFN=>IN. */
|
|
|
|
change_mask |= mask;
|
|
}
|
|
|
|
/* Write the new CON settings */
|
|
|
|
gpcon = old_gpcon & ~change_mask;
|
|
gpcon |= gps_gpcon & change_mask;
|
|
|
|
__raw_writel(gpcon, base + OFFS_CON);
|
|
|
|
/* Now change any items that require DAT,CON */
|
|
|
|
__raw_writel(gps_gpdat, base + OFFS_DAT);
|
|
__raw_writel(gps_gpcon, base + OFFS_CON);
|
|
__raw_writel(gps->gpup, base + OFFS_UP);
|
|
}
|
|
|
|
S3C_PMDBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
|
|
index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
|
|
}
|
|
|
|
|
|
/** s3c2410_pm_restore_gpios()
|
|
*
|
|
* Restore the state of the GPIOs
|
|
*/
|
|
|
|
void s3c_pm_restore_gpios(void)
|
|
{
|
|
struct gpio_sleep *gps = gpio_save;
|
|
int gpio;
|
|
|
|
for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
|
|
s3c2410_pm_restore_gpio(gpio, gps);
|
|
}
|
|
}
|
|
|
|
void s3c_pm_restore_core(void)
|
|
{
|
|
s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
|
|
s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
|
|
}
|
|
|
|
void s3c_pm_save_core(void)
|
|
{
|
|
s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
|
|
s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
|
|
}
|
|
|