Hans de Goede 2a221c0422 iio: imu: inv_mpu6050: Fix probe() failure on older ACPI based machines ... Commit 5ec6486daa ("iio:imu: inv_mpu6050: support more interrupt types") causes inv_mpu_core_probe() to fail if the IRQ does not have a trigger-type setup. This happens on machines where the mpu6050 is enumerated through ACPI and an older Interrupt type ACPI resource is used for the interrupt, rather then a GpioInt type type, causing the mpu6050 driver to no longer work there. This happens on e.g. the Asus T100TA. This commits makes the mpu6050 fallback to the old IRQF_TRIGGER_RISING default if the irq-type is not setup, fixing this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Fixes: 5ec6486daa ("iio:imu: inv_mpu6050: support more interrupt types") Reviewed-by: Martin Kelly <mkelly@xevo.com> Reviewed-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2018-06-24 14:50:52 +01:00
..
accel	iio: mma8452: Fix ignoring MMA8452_INT_DRDY	2018-06-24 14:22:41 +01:00
adc	treewide: devm_kzalloc() -> devm_kcalloc()	2018-06-12 16:19:22 -07:00
afe	iio: afe: rescale: new driver	2018-04-28 18:03:22 +01:00
amplifiers	iio: amplifiers: ad8366: move channel init before iio_device_register()	2018-05-22 18:13:45 +01:00
buffer	iio:kfifo_buf: check for uint overflow	2018-03-30 11:16:12 +01:00
chemical	1st round of IIO new device support, features and cleanup for the 4.18 cycle	2018-05-11 09:50:04 +02:00
common	Staging/IIO patches for 4.18-rc1	2018-06-09 10:32:39 -07:00
counter	iio: Change ISA_BUS_API dependency to selection	2018-02-22 16:13:41 +01:00
dac	treewide: devm_kzalloc() -> devm_kcalloc()	2018-06-12 16:19:22 -07:00
dummy	iio:dummy: Add extra paragraphs on Kconfig	2018-03-03 15:20:16 +00:00
frequency	iio:frequency: drop assign iio_info.driver_module	2017-08-22 21:28:20 +01:00
gyro	iio: Replace occurrences of magic number 0 by IIO_CHAN_INFO_RAW	2018-03-07 20:14:36 +00:00
health	iio: add SPDX identifier for various drivers	2018-02-18 11:55:19 +00:00
humidity	iio: add SPDX identifier for various drivers	2018-02-18 11:55:19 +00:00
imu	iio: imu: inv_mpu6050: Fix probe() failure on older ACPI based machines	2018-06-24 14:50:52 +01:00
light	iio: tsl2x7x/tsl2772: avoid potential division by zero	2018-06-24 14:22:38 +01:00
magnetometer	iio: magnetometer: mag3110: Add ability to run in continuous mode	2018-05-12 11:01:59 +01:00
multiplexer	treewide: devm_kzalloc() -> devm_kcalloc()	2018-06-12 16:19:22 -07:00
orientation	iio:orientation: drop assign iio_info.driver_module	2017-08-22 21:33:36 +01:00
potentiometer	iio: potentiometer: mcp4531: switch to using .probe_new	2018-04-15 18:12:51 +01:00
potentiostat	iio: potentiostat: lmp91000: add LMP91002 support	2018-05-12 11:02:44 +01:00
pressure	iio: pressure: bmp280: fix relative humidity unit	2018-06-24 14:22:35 +01:00
proximity	Second set of new device support, features and cleanup for IIO in the 4.17 cycle	2018-03-14 12:32:11 +01:00
resolver	staging: iio: ad2s1200: Move driver out of staging	2018-05-20 12:17:48 +01:00
temperature	iio temperature/mlx90632: silence a static checker warning	2018-02-24 13:32:05 +00:00
trigger	iio: stm32: Adopt SPDX identifier	2018-01-08 16:03:41 +01:00
iio_core_trigger.h
iio_core.h	the rest of drivers/*: annotate ->poll() instances	2017-11-28 11:06:58 -05:00
industrialio-buffer.c	First round of IIO fixes for the 4.16 cycle.	2018-02-20 10:03:22 +01:00
industrialio-configfs.c	iio: make function argument and some structures const	2017-10-19 16:15:24 +02:00
industrialio-core.c	Merge Linus's staging merge point into staging-next	2017-12-06 15:27:17 +01:00
industrialio-event.c	vfs: do bulk POLL* -> EPOLL* replacement	2018-02-11 14:34:03 -08:00
industrialio-sw-device.c	iio: make function argument and some structures const	2017-10-19 16:15:24 +02:00
industrialio-sw-trigger.c	iio: make function argument and some structures const	2017-10-19 16:15:24 +02:00
industrialio-trigger.c	iio:trigger: Remove necessity to have a trig->ops structure.	2017-08-22 21:20:28 +01:00
industrialio-triggered-event.c
inkern.c	treewide: kzalloc() -> kcalloc()	2018-06-12 16:19:22 -07:00
Kconfig	staging: iio: ad2s1200: Move driver out of staging	2018-05-20 12:17:48 +01:00
Makefile	staging: iio: ad2s1200: Move driver out of staging	2018-05-20 12:17:48 +01:00