2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 05:34:00 +08:00
linux-next/drivers/scsi/sr.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

966 lines
24 KiB
C

/*
* sr.c Copyright (C) 1992 David Giller
* Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
*
* adapted from:
* sd.c Copyright (C) 1992 Drew Eckhardt
* Linux scsi disk driver by
* Drew Eckhardt <drew@colorado.edu>
*
* Modified by Eric Youngdale ericy@andante.org to
* add scatter-gather, multiple outstanding request, and other
* enhancements.
*
* Modified by Eric Youngdale eric@andante.org to support loadable
* low-level scsi drivers.
*
* Modified by Thomas Quinot thomas@melchior.cuivre.fdn.fr to
* provide auto-eject.
*
* Modified by Gerd Knorr <kraxel@cs.tu-berlin.de> to support the
* generic cdrom interface
*
* Modified by Jens Axboe <axboe@suse.de> - Uniform sr_packet()
* interface, capabilities probe additions, ioctl cleanups, etc.
*
* Modified by Richard Gooch <rgooch@atnf.csiro.au> to support devfs
*
* Modified by Jens Axboe <axboe@suse.de> - support DVD-RAM
* transparently and lose the GHOST hack
*
* Modified by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
* check resource allocation in sr_init and some cleanups
*/
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/bio.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/cdrom.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <asm/uaccess.h>
#include <scsi/scsi.h>
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_driver.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_ioctl.h> /* For the door lock/unlock commands */
#include <scsi/scsi_request.h>
#include "scsi_logging.h"
#include "sr.h"
#define SR_DISKS 256
#define MAX_RETRIES 3
#define SR_TIMEOUT (30 * HZ)
#define SR_CAPABILITIES \
(CDC_CLOSE_TRAY|CDC_OPEN_TRAY|CDC_LOCK|CDC_SELECT_SPEED| \
CDC_SELECT_DISC|CDC_MULTI_SESSION|CDC_MCN|CDC_MEDIA_CHANGED| \
CDC_PLAY_AUDIO|CDC_RESET|CDC_IOCTLS|CDC_DRIVE_STATUS| \
CDC_CD_R|CDC_CD_RW|CDC_DVD|CDC_DVD_R|CDC_DVD_RAM|CDC_GENERIC_PACKET| \
CDC_MRW|CDC_MRW_W|CDC_RAM)
static int sr_probe(struct device *);
static int sr_remove(struct device *);
static int sr_init_command(struct scsi_cmnd *);
static struct scsi_driver sr_template = {
.owner = THIS_MODULE,
.gendrv = {
.name = "sr",
.probe = sr_probe,
.remove = sr_remove,
},
.init_command = sr_init_command,
};
static unsigned long sr_index_bits[SR_DISKS / BITS_PER_LONG];
static DEFINE_SPINLOCK(sr_index_lock);
/* This semaphore is used to mediate the 0->1 reference get in the
* face of object destruction (i.e. we can't allow a get on an
* object after last put) */
static DECLARE_MUTEX(sr_ref_sem);
static int sr_open(struct cdrom_device_info *, int);
static void sr_release(struct cdrom_device_info *);
static void get_sectorsize(struct scsi_cd *);
static void get_capabilities(struct scsi_cd *);
static int sr_media_change(struct cdrom_device_info *, int);
static int sr_packet(struct cdrom_device_info *, struct packet_command *);
static struct cdrom_device_ops sr_dops = {
.open = sr_open,
.release = sr_release,
.drive_status = sr_drive_status,
.media_changed = sr_media_change,
.tray_move = sr_tray_move,
.lock_door = sr_lock_door,
.select_speed = sr_select_speed,
.get_last_session = sr_get_last_session,
.get_mcn = sr_get_mcn,
.reset = sr_reset,
.audio_ioctl = sr_audio_ioctl,
.dev_ioctl = sr_dev_ioctl,
.capability = SR_CAPABILITIES,
.generic_packet = sr_packet,
};
static void sr_kref_release(struct kref *kref);
static inline struct scsi_cd *scsi_cd(struct gendisk *disk)
{
return container_of(disk->private_data, struct scsi_cd, driver);
}
/*
* The get and put routines for the struct scsi_cd. Note this entity
* has a scsi_device pointer and owns a reference to this.
*/
static inline struct scsi_cd *scsi_cd_get(struct gendisk *disk)
{
struct scsi_cd *cd = NULL;
down(&sr_ref_sem);
if (disk->private_data == NULL)
goto out;
cd = scsi_cd(disk);
kref_get(&cd->kref);
if (scsi_device_get(cd->device))
goto out_put;
goto out;
out_put:
kref_put(&cd->kref, sr_kref_release);
cd = NULL;
out:
up(&sr_ref_sem);
return cd;
}
static inline void scsi_cd_put(struct scsi_cd *cd)
{
struct scsi_device *sdev = cd->device;
down(&sr_ref_sem);
kref_put(&cd->kref, sr_kref_release);
scsi_device_put(sdev);
up(&sr_ref_sem);
}
/*
* This function checks to see if the media has been changed in the
* CDROM drive. It is possible that we have already sensed a change,
* or the drive may have sensed one and not yet reported it. We must
* be ready for either case. This function always reports the current
* value of the changed bit. If flag is 0, then the changed bit is reset.
* This function could be done as an ioctl, but we would need to have
* an inode for that to work, and we do not always have one.
*/
int sr_media_change(struct cdrom_device_info *cdi, int slot)
{
struct scsi_cd *cd = cdi->handle;
int retval;
if (CDSL_CURRENT != slot) {
/* no changer support */
return -EINVAL;
}
retval = scsi_test_unit_ready(cd->device, SR_TIMEOUT, MAX_RETRIES);
if (retval) {
/* Unable to test, unit probably not ready. This usually
* means there is no disc in the drive. Mark as changed,
* and we will figure it out later once the drive is
* available again. */
cd->device->changed = 1;
return 1; /* This will force a flush, if called from
* check_disk_change */
};
retval = cd->device->changed;
cd->device->changed = 0;
/* If the disk changed, the capacity will now be different,
* so we force a re-read of this information */
if (retval) {
/* check multisession offset etc */
sr_cd_check(cdi);
/*
* If the disk changed, the capacity will now be different,
* so we force a re-read of this information
* Force 2048 for the sector size so that filesystems won't
* be trying to use something that is too small if the disc
* has changed.
*/
cd->needs_sector_size = 1;
cd->device->sector_size = 2048;
}
return retval;
}
/*
* rw_intr is the interrupt routine for the device driver.
*
* It will be notified on the end of a SCSI read / write, and will take on
* of several actions based on success or failure.
*/
static void rw_intr(struct scsi_cmnd * SCpnt)
{
int result = SCpnt->result;
int this_count = SCpnt->bufflen;
int good_bytes = (result == 0 ? this_count : 0);
int block_sectors = 0;
long error_sector;
struct scsi_cd *cd = scsi_cd(SCpnt->request->rq_disk);
#ifdef DEBUG
printk("sr.c done: %x\n", result);
#endif
/*
* Handle MEDIUM ERRORs or VOLUME OVERFLOWs that indicate partial
* success. Since this is a relatively rare error condition, no
* care is taken to avoid unnecessary additional work such as
* memcpy's that could be avoided.
*/
if (driver_byte(result) != 0 && /* An error occurred */
(SCpnt->sense_buffer[0] & 0x7f) == 0x70) { /* Sense current */
switch (SCpnt->sense_buffer[2]) {
case MEDIUM_ERROR:
case VOLUME_OVERFLOW:
case ILLEGAL_REQUEST:
if (!(SCpnt->sense_buffer[0] & 0x90))
break;
if (!blk_fs_request(SCpnt->request))
break;
error_sector = (SCpnt->sense_buffer[3] << 24) |
(SCpnt->sense_buffer[4] << 16) |
(SCpnt->sense_buffer[5] << 8) |
SCpnt->sense_buffer[6];
if (SCpnt->request->bio != NULL)
block_sectors =
bio_sectors(SCpnt->request->bio);
if (block_sectors < 4)
block_sectors = 4;
if (cd->device->sector_size == 2048)
error_sector <<= 2;
error_sector &= ~(block_sectors - 1);
good_bytes = (error_sector - SCpnt->request->sector) << 9;
if (good_bytes < 0 || good_bytes >= this_count)
good_bytes = 0;
/*
* The SCSI specification allows for the value
* returned by READ CAPACITY to be up to 75 2K
* sectors past the last readable block.
* Therefore, if we hit a medium error within the
* last 75 2K sectors, we decrease the saved size
* value.
*/
if (error_sector < get_capacity(cd->disk) &&
cd->capacity - error_sector < 4 * 75)
set_capacity(cd->disk, error_sector);
break;
case RECOVERED_ERROR:
/*
* An error occured, but it recovered. Inform the
* user, but make sure that it's not treated as a
* hard error.
*/
scsi_print_sense("sr", SCpnt);
SCpnt->result = 0;
SCpnt->sense_buffer[0] = 0x0;
good_bytes = this_count;
break;
default:
break;
}
}
/*
* This calls the generic completion function, now that we know
* how many actual sectors finished, and how many sectors we need
* to say have failed.
*/
scsi_io_completion(SCpnt, good_bytes, block_sectors << 9);
}
static int sr_init_command(struct scsi_cmnd * SCpnt)
{
int block=0, this_count, s_size, timeout = SR_TIMEOUT;
struct scsi_cd *cd = scsi_cd(SCpnt->request->rq_disk);
SCSI_LOG_HLQUEUE(1, printk("Doing sr request, dev = %s, block = %d\n",
cd->disk->disk_name, block));
if (!cd->device || !scsi_device_online(cd->device)) {
SCSI_LOG_HLQUEUE(2, printk("Finishing %ld sectors\n",
SCpnt->request->nr_sectors));
SCSI_LOG_HLQUEUE(2, printk("Retry with 0x%p\n", SCpnt));
return 0;
}
if (cd->device->changed) {
/*
* quietly refuse to do anything to a changed disc until the
* changed bit has been reset
*/
return 0;
}
/*
* these are already setup, just copy cdb basically
*/
if (SCpnt->request->flags & REQ_BLOCK_PC) {
struct request *rq = SCpnt->request;
if (sizeof(rq->cmd) > sizeof(SCpnt->cmnd))
return 0;
memcpy(SCpnt->cmnd, rq->cmd, sizeof(SCpnt->cmnd));
if (!rq->data_len)
SCpnt->sc_data_direction = DMA_NONE;
else if (rq_data_dir(rq) == WRITE)
SCpnt->sc_data_direction = DMA_TO_DEVICE;
else
SCpnt->sc_data_direction = DMA_FROM_DEVICE;
this_count = rq->data_len;
if (rq->timeout)
timeout = rq->timeout;
SCpnt->transfersize = rq->data_len;
goto queue;
}
if (!(SCpnt->request->flags & REQ_CMD)) {
blk_dump_rq_flags(SCpnt->request, "sr unsup command");
return 0;
}
/*
* we do lazy blocksize switching (when reading XA sectors,
* see CDROMREADMODE2 ioctl)
*/
s_size = cd->device->sector_size;
if (s_size > 2048) {
if (!in_interrupt())
sr_set_blocklength(cd, 2048);
else
printk("sr: can't switch blocksize: in interrupt\n");
}
if (s_size != 512 && s_size != 1024 && s_size != 2048) {
printk("sr: bad sector size %d\n", s_size);
return 0;
}
if (rq_data_dir(SCpnt->request) == WRITE) {
if (!cd->device->writeable)
return 0;
SCpnt->cmnd[0] = WRITE_10;
SCpnt->sc_data_direction = DMA_TO_DEVICE;
cd->cdi.media_written = 1;
} else if (rq_data_dir(SCpnt->request) == READ) {
SCpnt->cmnd[0] = READ_10;
SCpnt->sc_data_direction = DMA_FROM_DEVICE;
} else {
blk_dump_rq_flags(SCpnt->request, "Unknown sr command");
return 0;
}
{
struct scatterlist *sg = SCpnt->request_buffer;
int i, size = 0;
for (i = 0; i < SCpnt->use_sg; i++)
size += sg[i].length;
if (size != SCpnt->request_bufflen && SCpnt->use_sg) {
printk(KERN_ERR "sr: mismatch count %d, bytes %d\n",
size, SCpnt->request_bufflen);
if (SCpnt->request_bufflen > size)
SCpnt->request_bufflen = SCpnt->bufflen = size;
}
}
/*
* request doesn't start on hw block boundary, add scatter pads
*/
if (((unsigned int)SCpnt->request->sector % (s_size >> 9)) ||
(SCpnt->request_bufflen % s_size)) {
printk("sr: unaligned transfer\n");
return 0;
}
this_count = (SCpnt->request_bufflen >> 9) / (s_size >> 9);
SCSI_LOG_HLQUEUE(2, printk("%s : %s %d/%ld 512 byte blocks.\n",
cd->cdi.name,
(rq_data_dir(SCpnt->request) == WRITE) ?
"writing" : "reading",
this_count, SCpnt->request->nr_sectors));
SCpnt->cmnd[1] = 0;
block = (unsigned int)SCpnt->request->sector / (s_size >> 9);
if (this_count > 0xffff) {
this_count = 0xffff;
SCpnt->request_bufflen = SCpnt->bufflen =
this_count * s_size;
}
SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff;
SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff;
SCpnt->cmnd[5] = (unsigned char) block & 0xff;
SCpnt->cmnd[6] = SCpnt->cmnd[9] = 0;
SCpnt->cmnd[7] = (unsigned char) (this_count >> 8) & 0xff;
SCpnt->cmnd[8] = (unsigned char) this_count & 0xff;
/*
* We shouldn't disconnect in the middle of a sector, so with a dumb
* host adapter, it's safe to assume that we can at least transfer
* this many bytes between each connect / disconnect.
*/
SCpnt->transfersize = cd->device->sector_size;
SCpnt->underflow = this_count << 9;
queue:
SCpnt->allowed = MAX_RETRIES;
SCpnt->timeout_per_command = timeout;
/*
* This is the completion routine we use. This is matched in terms
* of capability to this function.
*/
SCpnt->done = rw_intr;
/*
* This indicates that the command is ready from our end to be
* queued.
*/
return 1;
}
static int sr_block_open(struct inode *inode, struct file *file)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
struct scsi_cd *cd = scsi_cd(inode->i_bdev->bd_disk);
int ret = 0;
if(!(cd = scsi_cd_get(disk)))
return -ENXIO;
if((ret = cdrom_open(&cd->cdi, inode, file)) != 0)
scsi_cd_put(cd);
return ret;
}
static int sr_block_release(struct inode *inode, struct file *file)
{
int ret;
struct scsi_cd *cd = scsi_cd(inode->i_bdev->bd_disk);
ret = cdrom_release(&cd->cdi, file);
if(ret)
return ret;
scsi_cd_put(cd);
return 0;
}
static int sr_block_ioctl(struct inode *inode, struct file *file, unsigned cmd,
unsigned long arg)
{
struct scsi_cd *cd = scsi_cd(inode->i_bdev->bd_disk);
struct scsi_device *sdev = cd->device;
/*
* Send SCSI addressing ioctls directly to mid level, send other
* ioctls to cdrom/block level.
*/
switch (cmd) {
case SCSI_IOCTL_GET_IDLUN:
case SCSI_IOCTL_GET_BUS_NUMBER:
return scsi_ioctl(sdev, cmd, (void __user *)arg);
}
return cdrom_ioctl(file, &cd->cdi, inode, cmd, arg);
}
static int sr_block_media_changed(struct gendisk *disk)
{
struct scsi_cd *cd = scsi_cd(disk);
return cdrom_media_changed(&cd->cdi);
}
static struct block_device_operations sr_bdops =
{
.owner = THIS_MODULE,
.open = sr_block_open,
.release = sr_block_release,
.ioctl = sr_block_ioctl,
.media_changed = sr_block_media_changed,
/*
* No compat_ioctl for now because sr_block_ioctl never
* seems to pass arbitary ioctls down to host drivers.
*/
};
static int sr_open(struct cdrom_device_info *cdi, int purpose)
{
struct scsi_cd *cd = cdi->handle;
struct scsi_device *sdev = cd->device;
int retval;
/*
* If the device is in error recovery, wait until it is done.
* If the device is offline, then disallow any access to it.
*/
retval = -ENXIO;
if (!scsi_block_when_processing_errors(sdev))
goto error_out;
/*
* If this device did not have media in the drive at boot time, then
* we would have been unable to get the sector size. Check to see if
* this is the case, and try again.
*/
if (cd->needs_sector_size)
get_sectorsize(cd);
return 0;
error_out:
return retval;
}
static void sr_release(struct cdrom_device_info *cdi)
{
struct scsi_cd *cd = cdi->handle;
if (cd->device->sector_size > 2048)
sr_set_blocklength(cd, 2048);
}
static int sr_probe(struct device *dev)
{
struct scsi_device *sdev = to_scsi_device(dev);
struct gendisk *disk;
struct scsi_cd *cd;
int minor, error;
error = -ENODEV;
if (sdev->type != TYPE_ROM && sdev->type != TYPE_WORM)
goto fail;
error = -ENOMEM;
cd = kmalloc(sizeof(*cd), GFP_KERNEL);
if (!cd)
goto fail;
memset(cd, 0, sizeof(*cd));
kref_init(&cd->kref);
disk = alloc_disk(1);
if (!disk)
goto fail_free;
spin_lock(&sr_index_lock);
minor = find_first_zero_bit(sr_index_bits, SR_DISKS);
if (minor == SR_DISKS) {
spin_unlock(&sr_index_lock);
error = -EBUSY;
goto fail_put;
}
__set_bit(minor, sr_index_bits);
spin_unlock(&sr_index_lock);
disk->major = SCSI_CDROM_MAJOR;
disk->first_minor = minor;
sprintf(disk->disk_name, "sr%d", minor);
disk->fops = &sr_bdops;
disk->flags = GENHD_FL_CD;
cd->device = sdev;
cd->disk = disk;
cd->driver = &sr_template;
cd->disk = disk;
cd->capacity = 0x1fffff;
cd->needs_sector_size = 1;
cd->device->changed = 1; /* force recheck CD type */
cd->use = 1;
cd->readcd_known = 0;
cd->readcd_cdda = 0;
cd->cdi.ops = &sr_dops;
cd->cdi.handle = cd;
cd->cdi.mask = 0;
cd->cdi.capacity = 1;
sprintf(cd->cdi.name, "sr%d", minor);
sdev->sector_size = 2048; /* A guess, just in case */
/* FIXME: need to handle a get_capabilities failure properly ?? */
get_capabilities(cd);
sr_vendor_init(cd);
snprintf(disk->devfs_name, sizeof(disk->devfs_name),
"%s/cd", sdev->devfs_name);
disk->driverfs_dev = &sdev->sdev_gendev;
set_capacity(disk, cd->capacity);
disk->private_data = &cd->driver;
disk->queue = sdev->request_queue;
cd->cdi.disk = disk;
if (register_cdrom(&cd->cdi))
goto fail_put;
dev_set_drvdata(dev, cd);
disk->flags |= GENHD_FL_REMOVABLE;
add_disk(disk);
printk(KERN_DEBUG
"Attached scsi CD-ROM %s at scsi%d, channel %d, id %d, lun %d\n",
cd->cdi.name, sdev->host->host_no, sdev->channel,
sdev->id, sdev->lun);
return 0;
fail_put:
put_disk(disk);
fail_free:
kfree(cd);
fail:
return error;
}
static void get_sectorsize(struct scsi_cd *cd)
{
unsigned char cmd[10];
unsigned char *buffer;
int the_result, retries = 3;
int sector_size;
struct scsi_request *SRpnt = NULL;
request_queue_t *queue;
buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
if (!buffer)
goto Enomem;
SRpnt = scsi_allocate_request(cd->device, GFP_KERNEL);
if (!SRpnt)
goto Enomem;
do {
cmd[0] = READ_CAPACITY;
memset((void *) &cmd[1], 0, 9);
/* Mark as really busy */
SRpnt->sr_request->rq_status = RQ_SCSI_BUSY;
SRpnt->sr_cmd_len = 0;
memset(buffer, 0, 8);
/* Do the command and wait.. */
SRpnt->sr_data_direction = DMA_FROM_DEVICE;
scsi_wait_req(SRpnt, (void *) cmd, (void *) buffer,
8, SR_TIMEOUT, MAX_RETRIES);
the_result = SRpnt->sr_result;
retries--;
} while (the_result && retries);
scsi_release_request(SRpnt);
SRpnt = NULL;
if (the_result) {
cd->capacity = 0x1fffff;
sector_size = 2048; /* A guess, just in case */
cd->needs_sector_size = 1;
} else {
#if 0
if (cdrom_get_last_written(&cd->cdi,
&cd->capacity))
#endif
cd->capacity = 1 + ((buffer[0] << 24) |
(buffer[1] << 16) |
(buffer[2] << 8) |
buffer[3]);
sector_size = (buffer[4] << 24) |
(buffer[5] << 16) | (buffer[6] << 8) | buffer[7];
switch (sector_size) {
/*
* HP 4020i CD-Recorder reports 2340 byte sectors
* Philips CD-Writers report 2352 byte sectors
*
* Use 2k sectors for them..
*/
case 0:
case 2340:
case 2352:
sector_size = 2048;
/* fall through */
case 2048:
cd->capacity *= 4;
/* fall through */
case 512:
break;
default:
printk("%s: unsupported sector size %d.\n",
cd->cdi.name, sector_size);
cd->capacity = 0;
cd->needs_sector_size = 1;
}
cd->device->sector_size = sector_size;
/*
* Add this so that we have the ability to correctly gauge
* what the device is capable of.
*/
cd->needs_sector_size = 0;
set_capacity(cd->disk, cd->capacity);
}
queue = cd->device->request_queue;
blk_queue_hardsect_size(queue, sector_size);
out:
kfree(buffer);
return;
Enomem:
cd->capacity = 0x1fffff;
sector_size = 2048; /* A guess, just in case */
cd->needs_sector_size = 1;
if (SRpnt)
scsi_release_request(SRpnt);
goto out;
}
static void get_capabilities(struct scsi_cd *cd)
{
unsigned char *buffer;
struct scsi_mode_data data;
struct scsi_request *SRpnt;
unsigned char cmd[MAX_COMMAND_SIZE];
unsigned int the_result;
int retries, rc, n;
static char *loadmech[] =
{
"caddy",
"tray",
"pop-up",
"",
"changer",
"cartridge changer",
"",
""
};
/* allocate a request for the TEST_UNIT_READY */
SRpnt = scsi_allocate_request(cd->device, GFP_KERNEL);
if (!SRpnt) {
printk(KERN_WARNING "(get_capabilities:) Request allocation "
"failure.\n");
return;
}
/* allocate transfer buffer */
buffer = kmalloc(512, GFP_KERNEL | GFP_DMA);
if (!buffer) {
printk(KERN_ERR "sr: out of memory.\n");
scsi_release_request(SRpnt);
return;
}
/* issue TEST_UNIT_READY until the initial startup UNIT_ATTENTION
* conditions are gone, or a timeout happens
*/
retries = 0;
do {
memset((void *)cmd, 0, MAX_COMMAND_SIZE);
cmd[0] = TEST_UNIT_READY;
SRpnt->sr_cmd_len = 0;
SRpnt->sr_sense_buffer[0] = 0;
SRpnt->sr_sense_buffer[2] = 0;
SRpnt->sr_data_direction = DMA_NONE;
scsi_wait_req (SRpnt, (void *) cmd, buffer,
0, SR_TIMEOUT, MAX_RETRIES);
the_result = SRpnt->sr_result;
retries++;
} while (retries < 5 &&
(!scsi_status_is_good(the_result) ||
((driver_byte(the_result) & DRIVER_SENSE) &&
SRpnt->sr_sense_buffer[2] == UNIT_ATTENTION)));
/* ask for mode page 0x2a */
rc = scsi_mode_sense(cd->device, 0, 0x2a, buffer, 128,
SR_TIMEOUT, 3, &data);
if (!scsi_status_is_good(rc)) {
/* failed, drive doesn't have capabilities mode page */
cd->cdi.speed = 1;
cd->cdi.mask |= (CDC_CD_R | CDC_CD_RW | CDC_DVD_R |
CDC_DVD | CDC_DVD_RAM |
CDC_SELECT_DISC | CDC_SELECT_SPEED);
scsi_release_request(SRpnt);
kfree(buffer);
printk("%s: scsi-1 drive\n", cd->cdi.name);
return;
}
n = data.header_length + data.block_descriptor_length;
cd->cdi.speed = ((buffer[n + 8] << 8) + buffer[n + 9]) / 176;
cd->readcd_known = 1;
cd->readcd_cdda = buffer[n + 5] & 0x01;
/* print some capability bits */
printk("%s: scsi3-mmc drive: %dx/%dx %s%s%s%s%s%s\n", cd->cdi.name,
((buffer[n + 14] << 8) + buffer[n + 15]) / 176,
cd->cdi.speed,
buffer[n + 3] & 0x01 ? "writer " : "", /* CD Writer */
buffer[n + 3] & 0x20 ? "dvd-ram " : "",
buffer[n + 2] & 0x02 ? "cd/rw " : "", /* can read rewriteable */
buffer[n + 4] & 0x20 ? "xa/form2 " : "", /* can read xa/from2 */
buffer[n + 5] & 0x01 ? "cdda " : "", /* can read audio data */
loadmech[buffer[n + 6] >> 5]);
if ((buffer[n + 6] >> 5) == 0)
/* caddy drives can't close tray... */
cd->cdi.mask |= CDC_CLOSE_TRAY;
if ((buffer[n + 2] & 0x8) == 0)
/* not a DVD drive */
cd->cdi.mask |= CDC_DVD;
if ((buffer[n + 3] & 0x20) == 0)
/* can't write DVD-RAM media */
cd->cdi.mask |= CDC_DVD_RAM;
if ((buffer[n + 3] & 0x10) == 0)
/* can't write DVD-R media */
cd->cdi.mask |= CDC_DVD_R;
if ((buffer[n + 3] & 0x2) == 0)
/* can't write CD-RW media */
cd->cdi.mask |= CDC_CD_RW;
if ((buffer[n + 3] & 0x1) == 0)
/* can't write CD-R media */
cd->cdi.mask |= CDC_CD_R;
if ((buffer[n + 6] & 0x8) == 0)
/* can't eject */
cd->cdi.mask |= CDC_OPEN_TRAY;
if ((buffer[n + 6] >> 5) == mechtype_individual_changer ||
(buffer[n + 6] >> 5) == mechtype_cartridge_changer)
cd->cdi.capacity =
cdrom_number_of_slots(&cd->cdi);
if (cd->cdi.capacity <= 1)
/* not a changer */
cd->cdi.mask |= CDC_SELECT_DISC;
/*else I don't think it can close its tray
cd->cdi.mask |= CDC_CLOSE_TRAY; */
/*
* if DVD-RAM, MRW-W or CD-RW, we are randomly writable
*/
if ((cd->cdi.mask & (CDC_DVD_RAM | CDC_MRW_W | CDC_RAM | CDC_CD_RW)) !=
(CDC_DVD_RAM | CDC_MRW_W | CDC_RAM | CDC_CD_RW)) {
cd->device->writeable = 1;
}
scsi_release_request(SRpnt);
kfree(buffer);
}
/*
* sr_packet() is the entry point for the generic commands generated
* by the Uniform CD-ROM layer.
*/
static int sr_packet(struct cdrom_device_info *cdi,
struct packet_command *cgc)
{
if (cgc->timeout <= 0)
cgc->timeout = IOCTL_TIMEOUT;
sr_do_ioctl(cdi->handle, cgc);
return cgc->stat;
}
/**
* sr_kref_release - Called to free the scsi_cd structure
* @kref: pointer to embedded kref
*
* sr_ref_sem must be held entering this routine. Because it is
* called on last put, you should always use the scsi_cd_get()
* scsi_cd_put() helpers which manipulate the semaphore directly
* and never do a direct kref_put().
**/
static void sr_kref_release(struct kref *kref)
{
struct scsi_cd *cd = container_of(kref, struct scsi_cd, kref);
struct gendisk *disk = cd->disk;
spin_lock(&sr_index_lock);
clear_bit(disk->first_minor, sr_index_bits);
spin_unlock(&sr_index_lock);
unregister_cdrom(&cd->cdi);
disk->private_data = NULL;
put_disk(disk);
kfree(cd);
}
static int sr_remove(struct device *dev)
{
struct scsi_cd *cd = dev_get_drvdata(dev);
del_gendisk(cd->disk);
down(&sr_ref_sem);
kref_put(&cd->kref, sr_kref_release);
up(&sr_ref_sem);
return 0;
}
static int __init init_sr(void)
{
int rc;
rc = register_blkdev(SCSI_CDROM_MAJOR, "sr");
if (rc)
return rc;
return scsi_register_driver(&sr_template.gendrv);
}
static void __exit exit_sr(void)
{
scsi_unregister_driver(&sr_template.gendrv);
unregister_blkdev(SCSI_CDROM_MAJOR, "sr");
}
module_init(init_sr);
module_exit(exit_sr);
MODULE_LICENSE("GPL");