mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 04:34:11 +08:00
07fd296d3a
All boards, except Amstrad E3, mark USB config with __initdata. As a result, when you compile USB into modules, they will try to refer already released platform data and the behaviour is undefined. For example on Nokia 770, I get the following kernel panic when modprobing ohci-hcd: [ 3.462158] Unable to handle kernel paging request at virtual address e7fddef0 [ 3.477050] pgd = c3434000 [ 3.487365] [e7fddef0] *pgd=00000000 [ 3.498535] Internal error: Oops: 80000005 [#1] ARM [ 3.510955] Modules linked in: ohci_hcd(+) [ 3.522705] CPU: 0 Not tainted (3.7.0-770_tiny+ #5) [ 3.535552] PC is at 0xe7fddef0 [ 3.546508] LR is at ohci_omap_init+0x5c/0x144 [ohci_hcd] [ 3.560272] pc : [<e7fddef0>] lr : [<bf003140>] psr: a0000013 [ 3.560272] sp : c344bdb0 ip : c344bce0 fp : c344bdcc [ 3.589782] r10: 00000001 r9 : 00000000 r8 : 00000000 [ 3.604553] r7 : 00000026 r6 : 000000de r5 : c0227300 r4 : c342d620 [ 3.621032] r3 : e7fddef0 r2 : c048b880 r1 : 00000000 r0 : 0000000a [ 3.637786] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 3.655822] Control: 0005317f Table: 13434000 DAC: 00000015 [ 3.672790] Process modprobe (pid: 425, stack limit = 0xc344a1b8) [ 3.690643] Stack: (0xc344bdb0 to 0xc344c000) [ 3.707031] bda0: bf0030e4 c342d620 00000000 c049e62c [ 3.727905] bdc0: c344be04 c344bdd0 c0150ff0 bf0030f4 bf001b88 00000000 c048a4ac c345b020 [ 3.748870] bde0: c342d620 00000000 c048a468 bf003968 00000001 bf006000 c344be34 c344be08 [ 3.769836] be00: bf001bf0 c0150e48 00000000 c344be18 c00b9bfc c048a478 c048a4ac bf0037f8 [ 3.790985] be20: c012ca04 c000e024 c344be44 c344be38 c012d968 bf001a84 c344be64 c344be48 [ 3.812164] be40: c012c8ac c012d95c 00000000 c048a478 c048a4ac bf0037f8 c344be84 c344be68 [ 3.833740] be60: c012ca74 c012c80c 20000013 00000000 c344be88 bf0037f8 c344beac c344be88 [ 3.855468] be80: c012b038 c012ca14 c38093cc c383ee10 bf0037f8 c35be5a0 c049d5e8 00000000 [ 3.877166] bea0: c344bebc c344beb0 c012c40c c012aff4 c344beec c344bec0 c012bfc0 c012c3fc [ 3.898834] bec0: bf00378c 00000000 c344beec bf0037f8 00067f39 00000000 00005c44 c000e024 [ 3.920837] bee0: c344bf14 c344bef0 c012cd54 c012befc c04ce080 00067f39 00000000 00005c44 [ 3.943023] bf00: c000e024 bf006000 c344bf24 c344bf18 c012db14 c012ccc0 c344bf3c c344bf28 [ 3.965423] bf20: bf00604c c012dad8 c344a000 bf003834 c344bf7c c344bf40 c00087ac bf006010 [ 3.987976] bf40: 0000000f bf003834 00067f39 00000000 00005c44 bf003834 00067f39 00000000 [ 4.010711] bf60: 00005c44 c000e024 c344a000 00000000 c344bfa4 c344bf80 c004c35c c0008720 [ 4.033569] bf80: c344bfac c344bf90 01422192 01427ea0 00000000 00000080 00000000 c344bfa8 [ 4.056518] bfa0: c000dec0 c004c2f0 01422192 01427ea0 01427ea0 00005c44 00067f39 00000000 [ 4.079406] bfc0: 01422192 01427ea0 00000000 00000080 b6e11008 014221aa be941fcc b6e1e008 [ 4.102569] bfe0: b6ef6300 be941758 0000e93c b6ef6310 60000010 01427ea0 00000000 00000000 [ 4.125946] Backtrace: [ 4.143463] [<bf0030e4>] (ohci_omap_init+0x0/0x144 [ohci_hcd]) from [<c0150ff0>] (usb_add_hcd+0x1b8/0x61c) [ 4.183898] r6:c049e62c r5:00000000 r4:c342d620 r3:bf0030e4 [ 4.205596] [<c0150e38>] (usb_add_hcd+0x0/0x61c) from [<bf001bf0>] (ohci_hcd_omap_drv_probe+0x17c/0x224 [ohci_hcd]) [ 4.248138] [<bf001a74>] (ohci_hcd_omap_drv_probe+0x0/0x224 [ohci_hcd]) from [<c012d968>] (platform_drv_probe+0x1c/0x20) [ 4.292144] r8:c000e024 r7:c012ca04 r6:bf0037f8 r5:c048a4ac r4:c048a478 [ 4.316192] [<c012d94c>] (platform_drv_probe+0x0/0x20) from [<c012c8ac>] (driver_probe_device+0xb0/0x208) [ 4.360168] [<c012c7fc>] (driver_probe_device+0x0/0x208) from [<c012ca74>] (__driver_attach+0x70/0x94) [ 4.405548] r6:bf0037f8 r5:c048a4ac r4:c048a478 r3:00000000 [ 4.429809] [<c012ca04>] (__driver_attach+0x0/0x94) from [<c012b038>] (bus_for_each_dev+0x54/0x90) [ 4.475708] r6:bf0037f8 r5:c344be88 r4:00000000 r3:20000013 [ 4.500366] [<c012afe4>] (bus_for_each_dev+0x0/0x90) from [<c012c40c>] (driver_attach+0x20/0x28) [ 4.528442] r7:00000000 r6:c049d5e8 r5:c35be5a0 r4:bf0037f8 [ 4.553466] [<c012c3ec>] (driver_attach+0x0/0x28) from [<c012bfc0>] (bus_add_driver+0xd4/0x228) [ 4.581878] [<c012beec>] (bus_add_driver+0x0/0x228) from [<c012cd54>] (driver_register+0xa4/0x134) [ 4.629730] r8:c000e024 r7:00005c44 r6:00000000 r5:00067f39 r4:bf0037f8 [ 4.656738] [<c012ccb0>] (driver_register+0x0/0x134) from [<c012db14>] (platform_driver_register+0x4c/0x60) [ 4.706542] [<c012dac8>] (platform_driver_register+0x0/0x60) from [<bf00604c>] (ohci_hcd_mod_init+0x4c/0x8c [ohci_hcd]) [ 4.757843] [<bf006000>] (ohci_hcd_mod_init+0x0/0x8c [ohci_hcd]) from [<c00087ac>] (do_one_initcall+0x9c/0x174) [ 4.808990] r4:bf003834 r3:c344a000 [ 4.832641] [<c0008710>] (do_one_initcall+0x0/0x174) from [<c004c35c>] (sys_init_module+0x7c/0x194) [ 4.881530] [<c004c2e0>] (sys_init_module+0x0/0x194) from [<c000dec0>] (ret_fast_syscall+0x0/0x2c) [ 4.930664] r7:00000080 r6:00000000 r5:01427ea0 r4:01422192 [ 4.956481] Code: bad PC value [ 4.978729] ---[ end trace 58280240f08342c4 ]--- [ 5.002258] Kernel panic - not syncing: Fatal exception Fix this by taking a copy of the data. Also mark Amstrad E3's data with __initdata to save some memory with multi-board kernels. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
634 lines
14 KiB
C
634 lines
14 KiB
C
/*
|
|
* linux/arch/arm/mach-omap1/board-ams-delta.c
|
|
*
|
|
* Modified from board-generic.c
|
|
*
|
|
* Board specific inits for the Amstrad E3 (codename Delta) videophone
|
|
*
|
|
* Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/basic_mmio_gpio.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/input.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/regulator/fixed.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/serial_8250.h>
|
|
#include <linux/export.h>
|
|
#include <linux/omapfb.h>
|
|
#include <linux/io.h>
|
|
#include <linux/platform_data/gpio-omap.h>
|
|
|
|
#include <media/soc_camera.h>
|
|
|
|
#include <asm/serial.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <mach/board-ams-delta.h>
|
|
#include <linux/platform_data/keypad-omap.h>
|
|
#include <mach/mux.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <mach/ams-delta-fiq.h>
|
|
#include <mach/camera.h>
|
|
#include <mach/usb.h>
|
|
|
|
#include "iomap.h"
|
|
#include "common.h"
|
|
|
|
static const unsigned int ams_delta_keymap[] = {
|
|
KEY(0, 0, KEY_F1), /* Advert */
|
|
|
|
KEY(0, 3, KEY_COFFEE), /* Games */
|
|
KEY(0, 2, KEY_QUESTION), /* Directory */
|
|
KEY(2, 3, KEY_CONNECT), /* Internet */
|
|
KEY(1, 2, KEY_SHOP), /* Services */
|
|
KEY(1, 1, KEY_PHONE), /* VoiceMail */
|
|
|
|
KEY(0, 1, KEY_DELETE), /* Delete */
|
|
KEY(2, 2, KEY_PLAY), /* Play */
|
|
KEY(1, 0, KEY_PAGEUP), /* Up */
|
|
KEY(1, 3, KEY_PAGEDOWN), /* Down */
|
|
KEY(2, 0, KEY_EMAIL), /* ReadEmail */
|
|
KEY(2, 1, KEY_STOP), /* Stop */
|
|
|
|
/* Numeric keypad portion */
|
|
KEY(0, 7, KEY_KP1),
|
|
KEY(0, 6, KEY_KP2),
|
|
KEY(0, 5, KEY_KP3),
|
|
KEY(1, 7, KEY_KP4),
|
|
KEY(1, 6, KEY_KP5),
|
|
KEY(1, 5, KEY_KP6),
|
|
KEY(2, 7, KEY_KP7),
|
|
KEY(2, 6, KEY_KP8),
|
|
KEY(2, 5, KEY_KP9),
|
|
KEY(3, 6, KEY_KP0),
|
|
KEY(3, 7, KEY_KPASTERISK),
|
|
KEY(3, 5, KEY_KPDOT), /* # key */
|
|
KEY(7, 2, KEY_NUMLOCK), /* Mute */
|
|
KEY(7, 1, KEY_KPMINUS), /* Recall */
|
|
KEY(6, 1, KEY_KPPLUS), /* Redial */
|
|
KEY(7, 6, KEY_KPSLASH), /* Handsfree */
|
|
KEY(6, 0, KEY_ENTER), /* Video */
|
|
|
|
KEY(7, 4, KEY_CAMERA), /* Photo */
|
|
|
|
KEY(0, 4, KEY_F2), /* Home */
|
|
KEY(1, 4, KEY_F3), /* Office */
|
|
KEY(2, 4, KEY_F4), /* Mobile */
|
|
KEY(7, 7, KEY_F5), /* SMS */
|
|
KEY(7, 5, KEY_F6), /* Email */
|
|
|
|
/* QWERTY portion of keypad */
|
|
KEY(3, 4, KEY_Q),
|
|
KEY(3, 3, KEY_W),
|
|
KEY(3, 2, KEY_E),
|
|
KEY(3, 1, KEY_R),
|
|
KEY(3, 0, KEY_T),
|
|
KEY(4, 7, KEY_Y),
|
|
KEY(4, 6, KEY_U),
|
|
KEY(4, 5, KEY_I),
|
|
KEY(4, 4, KEY_O),
|
|
KEY(4, 3, KEY_P),
|
|
|
|
KEY(4, 2, KEY_A),
|
|
KEY(4, 1, KEY_S),
|
|
KEY(4, 0, KEY_D),
|
|
KEY(5, 7, KEY_F),
|
|
KEY(5, 6, KEY_G),
|
|
KEY(5, 5, KEY_H),
|
|
KEY(5, 4, KEY_J),
|
|
KEY(5, 3, KEY_K),
|
|
KEY(5, 2, KEY_L),
|
|
|
|
KEY(5, 1, KEY_Z),
|
|
KEY(5, 0, KEY_X),
|
|
KEY(6, 7, KEY_C),
|
|
KEY(6, 6, KEY_V),
|
|
KEY(6, 5, KEY_B),
|
|
KEY(6, 4, KEY_N),
|
|
KEY(6, 3, KEY_M),
|
|
KEY(6, 2, KEY_SPACE),
|
|
|
|
KEY(7, 0, KEY_LEFTSHIFT), /* Vol up */
|
|
KEY(7, 3, KEY_LEFTCTRL), /* Vol down */
|
|
};
|
|
|
|
#define LATCH1_PHYS 0x01000000
|
|
#define LATCH1_VIRT 0xEA000000
|
|
#define MODEM_PHYS 0x04000000
|
|
#define MODEM_VIRT 0xEB000000
|
|
#define LATCH2_PHYS 0x08000000
|
|
#define LATCH2_VIRT 0xEC000000
|
|
|
|
static struct map_desc ams_delta_io_desc[] __initdata = {
|
|
/* AMS_DELTA_LATCH1 */
|
|
{
|
|
.virtual = LATCH1_VIRT,
|
|
.pfn = __phys_to_pfn(LATCH1_PHYS),
|
|
.length = 0x01000000,
|
|
.type = MT_DEVICE
|
|
},
|
|
/* AMS_DELTA_LATCH2 */
|
|
{
|
|
.virtual = LATCH2_VIRT,
|
|
.pfn = __phys_to_pfn(LATCH2_PHYS),
|
|
.length = 0x01000000,
|
|
.type = MT_DEVICE
|
|
},
|
|
/* AMS_DELTA_MODEM */
|
|
{
|
|
.virtual = MODEM_VIRT,
|
|
.pfn = __phys_to_pfn(MODEM_PHYS),
|
|
.length = 0x01000000,
|
|
.type = MT_DEVICE
|
|
}
|
|
};
|
|
|
|
static struct omap_lcd_config ams_delta_lcd_config __initdata = {
|
|
.ctrl_name = "internal",
|
|
};
|
|
|
|
static struct omap_usb_config ams_delta_usb_config __initdata = {
|
|
.register_host = 1,
|
|
.hmc_mode = 16,
|
|
.pins[0] = 2,
|
|
};
|
|
|
|
#define LATCH1_GPIO_BASE 232
|
|
#define LATCH1_NGPIO 8
|
|
|
|
static struct resource latch1_resources[] = {
|
|
[0] = {
|
|
.name = "dat",
|
|
.start = LATCH1_PHYS,
|
|
.end = LATCH1_PHYS + (LATCH1_NGPIO - 1) / 8,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct bgpio_pdata latch1_pdata = {
|
|
.base = LATCH1_GPIO_BASE,
|
|
.ngpio = LATCH1_NGPIO,
|
|
};
|
|
|
|
static struct platform_device latch1_gpio_device = {
|
|
.name = "basic-mmio-gpio",
|
|
.id = 0,
|
|
.resource = latch1_resources,
|
|
.num_resources = ARRAY_SIZE(latch1_resources),
|
|
.dev = {
|
|
.platform_data = &latch1_pdata,
|
|
},
|
|
};
|
|
|
|
static struct resource latch2_resources[] = {
|
|
[0] = {
|
|
.name = "dat",
|
|
.start = LATCH2_PHYS,
|
|
.end = LATCH2_PHYS + (AMS_DELTA_LATCH2_NGPIO - 1) / 8,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct bgpio_pdata latch2_pdata = {
|
|
.base = AMS_DELTA_LATCH2_GPIO_BASE,
|
|
.ngpio = AMS_DELTA_LATCH2_NGPIO,
|
|
};
|
|
|
|
static struct platform_device latch2_gpio_device = {
|
|
.name = "basic-mmio-gpio",
|
|
.id = 1,
|
|
.resource = latch2_resources,
|
|
.num_resources = ARRAY_SIZE(latch2_resources),
|
|
.dev = {
|
|
.platform_data = &latch2_pdata,
|
|
},
|
|
};
|
|
|
|
static const struct gpio latch_gpios[] __initconst = {
|
|
{
|
|
.gpio = LATCH1_GPIO_BASE + 6,
|
|
.flags = GPIOF_OUT_INIT_LOW,
|
|
.label = "dockit1",
|
|
},
|
|
{
|
|
.gpio = LATCH1_GPIO_BASE + 7,
|
|
.flags = GPIOF_OUT_INIT_LOW,
|
|
.label = "dockit2",
|
|
},
|
|
{
|
|
.gpio = AMS_DELTA_GPIO_PIN_SCARD_RSTIN,
|
|
.flags = GPIOF_OUT_INIT_LOW,
|
|
.label = "scard_rstin",
|
|
},
|
|
{
|
|
.gpio = AMS_DELTA_GPIO_PIN_SCARD_CMDVCC,
|
|
.flags = GPIOF_OUT_INIT_LOW,
|
|
.label = "scard_cmdvcc",
|
|
},
|
|
{
|
|
.gpio = AMS_DELTA_GPIO_PIN_MODEM_CODEC,
|
|
.flags = GPIOF_OUT_INIT_LOW,
|
|
.label = "modem_codec",
|
|
},
|
|
{
|
|
.gpio = AMS_DELTA_LATCH2_GPIO_BASE + 14,
|
|
.flags = GPIOF_OUT_INIT_LOW,
|
|
.label = "hookflash1",
|
|
},
|
|
{
|
|
.gpio = AMS_DELTA_LATCH2_GPIO_BASE + 15,
|
|
.flags = GPIOF_OUT_INIT_LOW,
|
|
.label = "hookflash2",
|
|
},
|
|
};
|
|
|
|
static struct regulator_consumer_supply modem_nreset_consumers[] = {
|
|
REGULATOR_SUPPLY("RESET#", "serial8250.1"),
|
|
REGULATOR_SUPPLY("POR", "cx20442-codec"),
|
|
};
|
|
|
|
static struct regulator_init_data modem_nreset_data = {
|
|
.constraints = {
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
.boot_on = 1,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(modem_nreset_consumers),
|
|
.consumer_supplies = modem_nreset_consumers,
|
|
};
|
|
|
|
static struct fixed_voltage_config modem_nreset_config = {
|
|
.supply_name = "modem_nreset",
|
|
.microvolts = 3300000,
|
|
.gpio = AMS_DELTA_GPIO_PIN_MODEM_NRESET,
|
|
.startup_delay = 25000,
|
|
.enable_high = 1,
|
|
.enabled_at_boot = 1,
|
|
.init_data = &modem_nreset_data,
|
|
};
|
|
|
|
static struct platform_device modem_nreset_device = {
|
|
.name = "reg-fixed-voltage",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &modem_nreset_config,
|
|
},
|
|
};
|
|
|
|
struct modem_private_data {
|
|
struct regulator *regulator;
|
|
};
|
|
|
|
static struct modem_private_data modem_priv;
|
|
|
|
void ams_delta_latch_write(int base, int ngpio, u16 mask, u16 value)
|
|
{
|
|
int bit = 0;
|
|
u16 bitpos = 1 << bit;
|
|
|
|
for (; bit < ngpio; bit++, bitpos = bitpos << 1) {
|
|
if (!(mask & bitpos))
|
|
continue;
|
|
else
|
|
gpio_set_value(base + bit, (value & bitpos) != 0);
|
|
}
|
|
}
|
|
EXPORT_SYMBOL(ams_delta_latch_write);
|
|
|
|
static struct resource ams_delta_nand_resources[] = {
|
|
[0] = {
|
|
.start = OMAP1_MPUIO_BASE,
|
|
.end = OMAP1_MPUIO_BASE +
|
|
OMAP_MPUIO_IO_CNTL + sizeof(u32) - 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device ams_delta_nand_device = {
|
|
.name = "ams-delta-nand",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(ams_delta_nand_resources),
|
|
.resource = ams_delta_nand_resources,
|
|
};
|
|
|
|
static struct resource ams_delta_kp_resources[] = {
|
|
[0] = {
|
|
.start = INT_KEYBOARD,
|
|
.end = INT_KEYBOARD,
|
|
.flags = IORESOURCE_IRQ,
|
|
},
|
|
};
|
|
|
|
static const struct matrix_keymap_data ams_delta_keymap_data = {
|
|
.keymap = ams_delta_keymap,
|
|
.keymap_size = ARRAY_SIZE(ams_delta_keymap),
|
|
};
|
|
|
|
static struct omap_kp_platform_data ams_delta_kp_data = {
|
|
.rows = 8,
|
|
.cols = 8,
|
|
.keymap_data = &ams_delta_keymap_data,
|
|
.delay = 9,
|
|
};
|
|
|
|
static struct platform_device ams_delta_kp_device = {
|
|
.name = "omap-keypad",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &ams_delta_kp_data,
|
|
},
|
|
.num_resources = ARRAY_SIZE(ams_delta_kp_resources),
|
|
.resource = ams_delta_kp_resources,
|
|
};
|
|
|
|
static struct platform_device ams_delta_lcd_device = {
|
|
.name = "lcd_ams_delta",
|
|
.id = -1,
|
|
};
|
|
|
|
static const struct gpio_led gpio_leds[] __initconst = {
|
|
{
|
|
.name = "camera",
|
|
.gpio = LATCH1_GPIO_BASE + 0,
|
|
.default_state = LEDS_GPIO_DEFSTATE_OFF,
|
|
#ifdef CONFIG_LEDS_TRIGGERS
|
|
.default_trigger = "ams_delta_camera",
|
|
#endif
|
|
},
|
|
{
|
|
.name = "advert",
|
|
.gpio = LATCH1_GPIO_BASE + 1,
|
|
.default_state = LEDS_GPIO_DEFSTATE_OFF,
|
|
},
|
|
{
|
|
.name = "email",
|
|
.gpio = LATCH1_GPIO_BASE + 2,
|
|
.default_state = LEDS_GPIO_DEFSTATE_OFF,
|
|
},
|
|
{
|
|
.name = "handsfree",
|
|
.gpio = LATCH1_GPIO_BASE + 3,
|
|
.default_state = LEDS_GPIO_DEFSTATE_OFF,
|
|
},
|
|
{
|
|
.name = "voicemail",
|
|
.gpio = LATCH1_GPIO_BASE + 4,
|
|
.default_state = LEDS_GPIO_DEFSTATE_OFF,
|
|
},
|
|
{
|
|
.name = "voice",
|
|
.gpio = LATCH1_GPIO_BASE + 5,
|
|
.default_state = LEDS_GPIO_DEFSTATE_OFF,
|
|
},
|
|
};
|
|
|
|
static const struct gpio_led_platform_data leds_pdata __initconst = {
|
|
.leds = gpio_leds,
|
|
.num_leds = ARRAY_SIZE(gpio_leds),
|
|
};
|
|
|
|
static struct i2c_board_info ams_delta_camera_board_info[] = {
|
|
{
|
|
I2C_BOARD_INFO("ov6650", 0x60),
|
|
},
|
|
};
|
|
|
|
#ifdef CONFIG_LEDS_TRIGGERS
|
|
DEFINE_LED_TRIGGER(ams_delta_camera_led_trigger);
|
|
|
|
static int ams_delta_camera_power(struct device *dev, int power)
|
|
{
|
|
/*
|
|
* turn on camera LED
|
|
*/
|
|
if (power)
|
|
led_trigger_event(ams_delta_camera_led_trigger, LED_FULL);
|
|
else
|
|
led_trigger_event(ams_delta_camera_led_trigger, LED_OFF);
|
|
return 0;
|
|
}
|
|
#else
|
|
#define ams_delta_camera_power NULL
|
|
#endif
|
|
|
|
static struct soc_camera_link ams_delta_iclink = {
|
|
.bus_id = 0, /* OMAP1 SoC camera bus */
|
|
.i2c_adapter_id = 1,
|
|
.board_info = &ams_delta_camera_board_info[0],
|
|
.module_name = "ov6650",
|
|
.power = ams_delta_camera_power,
|
|
};
|
|
|
|
static struct platform_device ams_delta_camera_device = {
|
|
.name = "soc-camera-pdrv",
|
|
.id = 0,
|
|
.dev = {
|
|
.platform_data = &ams_delta_iclink,
|
|
},
|
|
};
|
|
|
|
static struct omap1_cam_platform_data ams_delta_camera_platform_data = {
|
|
.camexclk_khz = 12000, /* default 12MHz clock, no extra DPLL */
|
|
.lclk_khz_max = 1334, /* results in 5fps CIF, 10fps QCIF */
|
|
};
|
|
|
|
static struct platform_device ams_delta_audio_device = {
|
|
.name = "ams-delta-audio",
|
|
.id = -1,
|
|
};
|
|
|
|
static struct platform_device cx20442_codec_device = {
|
|
.name = "cx20442-codec",
|
|
.id = -1,
|
|
};
|
|
|
|
static struct platform_device *ams_delta_devices[] __initdata = {
|
|
&latch1_gpio_device,
|
|
&latch2_gpio_device,
|
|
&ams_delta_kp_device,
|
|
&ams_delta_camera_device,
|
|
&ams_delta_audio_device,
|
|
};
|
|
|
|
static struct platform_device *late_devices[] __initdata = {
|
|
&ams_delta_nand_device,
|
|
&ams_delta_lcd_device,
|
|
&cx20442_codec_device,
|
|
};
|
|
|
|
static void __init ams_delta_init(void)
|
|
{
|
|
/* mux pins for uarts */
|
|
omap_cfg_reg(UART1_TX);
|
|
omap_cfg_reg(UART1_RTS);
|
|
|
|
/* parallel camera interface */
|
|
omap_cfg_reg(H19_1610_CAM_EXCLK);
|
|
omap_cfg_reg(J15_1610_CAM_LCLK);
|
|
omap_cfg_reg(L18_1610_CAM_VS);
|
|
omap_cfg_reg(L15_1610_CAM_HS);
|
|
omap_cfg_reg(L19_1610_CAM_D0);
|
|
omap_cfg_reg(K14_1610_CAM_D1);
|
|
omap_cfg_reg(K15_1610_CAM_D2);
|
|
omap_cfg_reg(K19_1610_CAM_D3);
|
|
omap_cfg_reg(K18_1610_CAM_D4);
|
|
omap_cfg_reg(J14_1610_CAM_D5);
|
|
omap_cfg_reg(J19_1610_CAM_D6);
|
|
omap_cfg_reg(J18_1610_CAM_D7);
|
|
|
|
omap_serial_init();
|
|
omap_register_i2c_bus(1, 100, NULL, 0);
|
|
|
|
omap1_usb_init(&ams_delta_usb_config);
|
|
omap1_set_camera_info(&ams_delta_camera_platform_data);
|
|
#ifdef CONFIG_LEDS_TRIGGERS
|
|
led_trigger_register_simple("ams_delta_camera",
|
|
&ams_delta_camera_led_trigger);
|
|
#endif
|
|
gpio_led_register_device(-1, &leds_pdata);
|
|
platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
|
|
|
|
ams_delta_init_fiq();
|
|
|
|
omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
|
|
|
|
omapfb_set_lcd_config(&ams_delta_lcd_config);
|
|
}
|
|
|
|
static void modem_pm(struct uart_port *port, unsigned int state, unsigned old)
|
|
{
|
|
struct modem_private_data *priv = port->private_data;
|
|
|
|
if (IS_ERR(priv->regulator))
|
|
return;
|
|
|
|
if (state == old)
|
|
return;
|
|
|
|
if (state == 0)
|
|
regulator_enable(priv->regulator);
|
|
else if (old == 0)
|
|
regulator_disable(priv->regulator);
|
|
}
|
|
|
|
static struct plat_serial8250_port ams_delta_modem_ports[] = {
|
|
{
|
|
.membase = IOMEM(MODEM_VIRT),
|
|
.mapbase = MODEM_PHYS,
|
|
.irq = -EINVAL, /* changed later */
|
|
.flags = UPF_BOOT_AUTOCONF,
|
|
.irqflags = IRQF_TRIGGER_RISING,
|
|
.iotype = UPIO_MEM,
|
|
.regshift = 1,
|
|
.uartclk = BASE_BAUD * 16,
|
|
.pm = modem_pm,
|
|
.private_data = &modem_priv,
|
|
},
|
|
{ },
|
|
};
|
|
|
|
static struct platform_device ams_delta_modem_device = {
|
|
.name = "serial8250",
|
|
.id = PLAT8250_DEV_PLATFORM1,
|
|
.dev = {
|
|
.platform_data = ams_delta_modem_ports,
|
|
},
|
|
};
|
|
|
|
static int __init late_init(void)
|
|
{
|
|
int err;
|
|
|
|
if (!machine_is_ams_delta())
|
|
return -ENODEV;
|
|
|
|
err = gpio_request_array(latch_gpios, ARRAY_SIZE(latch_gpios));
|
|
if (err) {
|
|
pr_err("Couldn't take over latch1/latch2 GPIO pins\n");
|
|
return err;
|
|
}
|
|
|
|
platform_add_devices(late_devices, ARRAY_SIZE(late_devices));
|
|
|
|
err = platform_device_register(&modem_nreset_device);
|
|
if (err) {
|
|
pr_err("Couldn't register the modem regulator device\n");
|
|
return err;
|
|
}
|
|
|
|
omap_cfg_reg(M14_1510_GPIO2);
|
|
ams_delta_modem_ports[0].irq =
|
|
gpio_to_irq(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
|
|
|
|
err = gpio_request(AMS_DELTA_GPIO_PIN_MODEM_IRQ, "modem");
|
|
if (err) {
|
|
pr_err("Couldn't request gpio pin for modem\n");
|
|
return err;
|
|
}
|
|
gpio_direction_input(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
|
|
|
|
/* Initialize the modem_nreset regulator consumer before use */
|
|
modem_priv.regulator = ERR_PTR(-ENODEV);
|
|
|
|
ams_delta_latch2_write(AMS_DELTA_LATCH2_MODEM_CODEC,
|
|
AMS_DELTA_LATCH2_MODEM_CODEC);
|
|
|
|
err = platform_device_register(&ams_delta_modem_device);
|
|
if (err)
|
|
goto gpio_free;
|
|
|
|
/*
|
|
* Once the modem device is registered, the modem_nreset
|
|
* regulator can be requested on behalf of that device.
|
|
*/
|
|
modem_priv.regulator = regulator_get(&ams_delta_modem_device.dev,
|
|
"RESET#");
|
|
if (IS_ERR(modem_priv.regulator)) {
|
|
err = PTR_ERR(modem_priv.regulator);
|
|
goto unregister;
|
|
}
|
|
return 0;
|
|
|
|
unregister:
|
|
platform_device_unregister(&ams_delta_modem_device);
|
|
gpio_free:
|
|
gpio_free(AMS_DELTA_GPIO_PIN_MODEM_IRQ);
|
|
return err;
|
|
}
|
|
|
|
static void __init ams_delta_init_late(void)
|
|
{
|
|
omap1_init_late();
|
|
late_init();
|
|
}
|
|
|
|
static void __init ams_delta_map_io(void)
|
|
{
|
|
omap15xx_map_io();
|
|
iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
|
|
}
|
|
|
|
MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
|
|
/* Maintainer: Jonathan McDowell <noodles@earth.li> */
|
|
.atag_offset = 0x100,
|
|
.map_io = ams_delta_map_io,
|
|
.init_early = omap1_init_early,
|
|
.init_irq = omap1_init_irq,
|
|
.init_machine = ams_delta_init,
|
|
.init_late = ams_delta_init_late,
|
|
.timer = &omap1_timer,
|
|
.restart = omap1_restart,
|
|
MACHINE_END
|