renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-16 17:23:55 +08:00
Code
de948576f8
linux-next/lib/Makefile
Linus Torvalds e2ae634014 RISC-V Patches for the 5.11 Merge Window, Part 1 
We have a handful of new kernel features for 5.11:
 
 * Support for the contiguous memory allocator.
 * Support for IRQ Time Accounting
 * Support for stack tracing
 * Support for strict /dev/mem
 * Support for kernel section protection
 
 I'm being a bit conservative on the cutoff for this round due to the
 timing, so this is all the new development I'm going to take for this
 cycle (even if some of it probably normally would have been OK).  There
 are, however, some fixes on the list that I will likely be sending along
 either later this week or early next week.
 
 There is one issue in here: one of my test configurations
 (PREEMPT{,_DEBUG}=y) fails to boot on QEMU 5.0.0 (from April) as of the
 .text.init alignment patch.  With any luck we'll sort out the issue, but
 given how many bugs get fixed all over the place and how unrelated those
 features seem my guess is that we're just running into something that's
 been lurking for a while and has already been fixed in the newer QEMU
 (though I wouldn't be surprised if it's one of these implicit
 assumptions we have in the boot flow).  If it was hardware I'd be
 strongly inclined to look more closely, but given that users can upgrade
 their simulators I'm less worried about it.
 
 There are two merge conflicts, both in build files.  They're both a bit
 clunky: arch/riscv/Kconfig is out of order (I have a script that's
 supposed to keep them in order, I'll fix it) and lib/Makefile is out of
 order (though GENERIC_LIB here doesn't mean quite what it does above).
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAl/cHO4THHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRAuExnzX7sYiTlmD/4uDyNHBM1XH/XD4fSEwTYJvGLqt/Jo
 vtrGR/fm0SlQFUKCcywSzxcVAeGn56CACbEIDYLuL4xXRJmbwEuaRrHVx2sEhS9p
 pNhy+wus/SgDz5EUAawMyR2AEWgzl77hY5T/+AAo4yv65SGGBfsIdz5noIVwGNqW
 r0g5cw2O99z0vwu1aSrK4isWHconG9MfQnnVyepPSh67pyWS4aUCr1K3vLiqD2dE
 XcgtwdcgzUIY5aEoJNrWo5qTrcaG8m6MRNCDAKJ6MKdDA2wdGIN868G0wQnoURRm
 Y+yW7w3P20kM0b87zH50jujTWg38NBKOfaXb0mAfawZMapL60veTVmvs2kNtFXCy
 F6JWRkgTiRnGY72FtRR0igWXT5M7fz0EiLFXLMItGcgj79TUget4l/3sRMN47S/O
 cA/WiwptJH3mh8IkL6z5ZxWEThdOrbFt8F1T+Gyq/ayblcPnJaLn/wrWoeOwviWR
 fvEC7smuF5SBTbWZK5tBOP21Nvhb7bfr49Sgr8Tvdjl15tz97qK+2tsLXwkBoQnJ
 wU45jcXfzr5wgiGBOQANRite5bLsJ0TuOrTgA5gsGpv+JSDGbpcJbm0833x00nX/
 3GsW5xr+vsLCvljgPAtKsyDNRlGQu908Gxrat2+s8u92bLr1bwn30uKL5h6i/n1w
 QgWATuPPGXZZdw==
 =GWIH
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-5.11-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:
 "We have a handful of new kernel features for 5.11:

   - Support for the contiguous memory allocator.

   - Support for IRQ Time Accounting

   - Support for stack tracing

   - Support for strict /dev/mem

   - Support for kernel section protection

  I'm being a bit conservative on the cutoff for this round due to the
  timing, so this is all the new development I'm going to take for this
  cycle (even if some of it probably normally would have been OK). There
  are, however, some fixes on the list that I will likely be sending
  along either later this week or early next week.

  There is one issue in here: one of my test configurations
  (PREEMPT{,_DEBUG}=y) fails to boot on QEMU 5.0.0 (from April) as of
  the .text.init alignment patch.

  With any luck we'll sort out the issue, but given how many bugs get
  fixed all over the place and how unrelated those features seem my
  guess is that we're just running into something that's been lurking
  for a while and has already been fixed in the newer QEMU (though I
  wouldn't be surprised if it's one of these implicit assumptions we
  have in the boot flow). If it was hardware I'd be strongly inclined to
  look more closely, but given that users can upgrade their simulators
  I'm less worried about it"

* tag 'riscv-for-linus-5.11-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  arm64: Use the generic devmem_is_allowed()
  arm: Use the generic devmem_is_allowed()
  RISC-V: Use the new generic devmem_is_allowed()
  lib: Add a generic version of devmem_is_allowed()
  riscv: Fixed kernel test robot warning
  riscv: kernel: Drop unused clean rule
  riscv: provide memmove implementation
  RISC-V: Move dynamic relocation section under __init
  RISC-V: Protect all kernel sections including init early
  RISC-V: Align the .init.text section
  RISC-V: Initialize SBI early
  riscv: Enable ARCH_STACKWALK
  riscv: Make stack walk callback consistent with generic code
  riscv: Cleanup stacktrace
  riscv: Add HAVE_IRQ_TIME_ACCOUNTING
  riscv: Enable CMA support
  riscv: Ignore Image.* and loader.bin
  riscv: Clean up boot dir
  riscv: Fix compressed Image formats build
  RISC-V: Add kernel image sections to the resource tree
2020-12-18 10:43:07 -08:00

359 lines
12 KiB
Makefile
Raw Blame History

# SPDX-License-Identifier: GPL-2.0
#
# Makefile for some libs needed in the kernel.
#
ccflags-remove-$(CONFIG_FUNCTION_TRACER) += $(CC_FLAGS_FTRACE)
# These files are disabled because they produce lots of non-interesting and/or
# flaky coverage that is not a function of syscall inputs. For example,
# rbtree can be global and individual rotations don't correlate with inputs.
KCOV_INSTRUMENT_string.o := n
KCOV_INSTRUMENT_rbtree.o := n
KCOV_INSTRUMENT_list_debug.o := n
KCOV_INSTRUMENT_debugobjects.o := n
KCOV_INSTRUMENT_dynamic_debug.o := n
KCOV_INSTRUMENT_fault-inject.o := n
# string.o implements standard library functions like memset/memcpy etc.
# Use -ffreestanding to ensure that the compiler does not try to "optimize"
# them into calls to themselves.
CFLAGS_string.o := -ffreestanding
# Early boot use of cmdline, don't instrument it
ifdef CONFIG_AMD_MEM_ENCRYPT
KASAN_SANITIZE_string.o := n
CFLAGS_string.o += -fno-stack-protector
endif
# Used by KCSAN while enabled, avoid recursion.
KCSAN_SANITIZE_random32.o := n
lib-y := ctype.o string.o vsprintf.o cmdline.o \
rbtree.o radix-tree.o timerqueue.o xarray.o \
idr.o extable.o sha1.o irq_regs.o argv_split.o \
flex_proportions.o ratelimit.o show_mem.o \
is_single_threaded.o plist.o decompress.o kobject_uevent.o \
earlycpio.o seq_buf.o siphash.o dec_and_lock.o \
nmi_backtrace.o nodemask.o win_minmax.o memcat_p.o
lib-$(CONFIG_PRINTK) += dump_stack.o
lib-$(CONFIG_SMP) += cpumask.o
lib-y += kobject.o klist.o
obj-y += lockref.o
obj-y += bcd.o sort.o parser.o debug_locks.o random32.o \
bust_spinlocks.o kasprintf.o bitmap.o scatterlist.o \
list_sort.o uuid.o iov_iter.o clz_ctz.o \
bsearch.o find_bit.o llist.o memweight.o kfifo.o \
percpu-refcount.o rhashtable.o \
once.o refcount.o usercopy.o errseq.o bucket_locks.o \
generic-radix-tree.o
obj-$(CONFIG_STRING_SELFTEST) += test_string.o
obj-y += string_helpers.o
obj-$(CONFIG_TEST_STRING_HELPERS) += test-string_helpers.o
obj-y += hexdump.o
obj-$(CONFIG_TEST_HEXDUMP) += test_hexdump.o
obj-y += kstrtox.o
obj-$(CONFIG_FIND_BIT_BENCHMARK) += find_bit_benchmark.o
obj-$(CONFIG_TEST_BPF) += test_bpf.o
obj-$(CONFIG_TEST_FIRMWARE) += test_firmware.o
obj-$(CONFIG_TEST_BITOPS) += test_bitops.o
CFLAGS_test_bitops.o += -Werror
obj-$(CONFIG_TEST_SYSCTL) += test_sysctl.o
obj-$(CONFIG_TEST_HASH) += test_hash.o test_siphash.o
obj-$(CONFIG_TEST_IDA) += test_ida.o
obj-$(CONFIG_KASAN_KUNIT_TEST) += test_kasan.o
CFLAGS_test_kasan.o += -fno-builtin
CFLAGS_test_kasan.o += $(call cc-disable-warning, vla)
obj-$(CONFIG_TEST_KASAN_MODULE) += test_kasan_module.o
CFLAGS_test_kasan_module.o += -fno-builtin
obj-$(CONFIG_TEST_UBSAN) += test_ubsan.o
CFLAGS_test_ubsan.o += $(call cc-disable-warning, vla)
UBSAN_SANITIZE_test_ubsan.o := y
obj-$(CONFIG_TEST_KSTRTOX) += test-kstrtox.o
obj-$(CONFIG_TEST_LIST_SORT) += test_list_sort.o
obj-$(CONFIG_TEST_MIN_HEAP) += test_min_heap.o
obj-$(CONFIG_TEST_LKM) += test_module.o
obj-$(CONFIG_TEST_VMALLOC) += test_vmalloc.o
obj-$(CONFIG_TEST_OVERFLOW) += test_overflow.o
obj-$(CONFIG_TEST_RHASHTABLE) += test_rhashtable.o
obj-$(CONFIG_TEST_SORT) += test_sort.o
obj-$(CONFIG_TEST_USER_COPY) += test_user_copy.o
obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_keys.o
obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_key_base.o
obj-$(CONFIG_TEST_PRINTF) += test_printf.o
obj-$(CONFIG_TEST_BITMAP) += test_bitmap.o
obj-$(CONFIG_TEST_STRSCPY) += test_strscpy.o
obj-$(CONFIG_TEST_UUID) += test_uuid.o
obj-$(CONFIG_TEST_XARRAY) += test_xarray.o
obj-$(CONFIG_TEST_PARMAN) += test_parman.o
obj-$(CONFIG_TEST_KMOD) += test_kmod.o
obj-$(CONFIG_TEST_DEBUG_VIRTUAL) += test_debug_virtual.o
obj-$(CONFIG_TEST_MEMCAT_P) += test_memcat_p.o
obj-$(CONFIG_TEST_OBJAGG) += test_objagg.o
CFLAGS_test_stackinit.o += $(call cc-disable-warning, switch-unreachable)
obj-$(CONFIG_TEST_STACKINIT) += test_stackinit.o
obj-$(CONFIG_TEST_BLACKHOLE_DEV) += test_blackhole_dev.o
obj-$(CONFIG_TEST_MEMINIT) += test_meminit.o
obj-$(CONFIG_TEST_LOCKUP) += test_lockup.o
obj-$(CONFIG_TEST_HMM) += test_hmm.o
obj-$(CONFIG_TEST_FREE_PAGES) += test_free_pages.o
#
# CFLAGS for compiling floating point code inside the kernel. x86/Makefile turns
# off the generation of FPU/SSE* instructions for kernel proper but FPU_FLAGS
# get appended last to CFLAGS and thus override those previous compiler options.
#
FPU_CFLAGS := -msse -msse2
ifdef CONFIG_CC_IS_GCC
# Stack alignment mismatch, proceed with caution.
# GCC < 7.1 cannot compile code using `double` and -mpreferred-stack-boundary=3
# (8B stack alignment).
# See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53383
#
# The "-msse" in the first argument is there so that the
# -mpreferred-stack-boundary=3 build error:
#
# -mpreferred-stack-boundary=3 is not between 4 and 12
#
# can be triggered. Otherwise gcc doesn't complain.
FPU_CFLAGS += -mhard-float
FPU_CFLAGS += $(call cc-option,-msse -mpreferred-stack-boundary=3,-mpreferred-stack-boundary=4)
endif
obj-$(CONFIG_TEST_FPU) += test_fpu.o
CFLAGS_test_fpu.o += $(FPU_CFLAGS)
obj-$(CONFIG_TEST_LIVEPATCH) += livepatch/
obj-$(CONFIG_KUNIT) += kunit/
ifeq ($(CONFIG_DEBUG_KOBJECT),y)
CFLAGS_kobject.o += -DDEBUG
CFLAGS_kobject_uevent.o += -DDEBUG
endif
obj-$(CONFIG_DEBUG_INFO_REDUCED) += debug_info.o
CFLAGS_debug_info.o += $(call cc-option, -femit-struct-debug-detailed=any)
obj-y += math/ crypto/
obj-$(CONFIG_GENERIC_IOMAP) += iomap.o
obj-$(CONFIG_GENERIC_PCI_IOMAP) += pci_iomap.o
obj-$(CONFIG_HAS_IOMEM) += iomap_copy.o devres.o
obj-$(CONFIG_CHECK_SIGNATURE) += check_signature.o
obj-$(CONFIG_DEBUG_LOCKING_API_SELFTESTS) += locking-selftest.o
lib-y += logic_pio.o
obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
obj-$(CONFIG_BTREE) += btree.o
obj-$(CONFIG_INTERVAL_TREE) += interval_tree.o
obj-$(CONFIG_ASSOCIATIVE_ARRAY) += assoc_array.o
obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o
obj-$(CONFIG_DEBUG_LIST) += list_debug.o
obj-$(CONFIG_DEBUG_OBJECTS) += debugobjects.o
obj-$(CONFIG_BITREVERSE) += bitrev.o
obj-$(CONFIG_LINEAR_RANGES) += linear_ranges.o
obj-$(CONFIG_PACKING) += packing.o
obj-$(CONFIG_CRC_CCITT) += crc-ccitt.o
obj-$(CONFIG_CRC16) += crc16.o
obj-$(CONFIG_CRC_T10DIF)+= crc-t10dif.o
obj-$(CONFIG_CRC_ITU_T) += crc-itu-t.o
obj-$(CONFIG_CRC32) += crc32.o
obj-$(CONFIG_CRC64) += crc64.o
obj-$(CONFIG_CRC32_SELFTEST) += crc32test.o
obj-$(CONFIG_CRC4) += crc4.o
obj-$(CONFIG_CRC7) += crc7.o
obj-$(CONFIG_LIBCRC32C) += libcrc32c.o
obj-$(CONFIG_CRC8) += crc8.o
obj-$(CONFIG_XXHASH) += xxhash.o
obj-$(CONFIG_GENERIC_ALLOCATOR) += genalloc.o
obj-$(CONFIG_842_COMPRESS) += 842/
obj-$(CONFIG_842_DECOMPRESS) += 842/
obj-$(CONFIG_ZLIB_INFLATE) += zlib_inflate/
obj-$(CONFIG_ZLIB_DEFLATE) += zlib_deflate/
obj-$(CONFIG_ZLIB_DFLTCC) += zlib_dfltcc/
obj-$(CONFIG_REED_SOLOMON) += reed_solomon/
obj-$(CONFIG_BCH) += bch.o
obj-$(CONFIG_LZO_COMPRESS) += lzo/
obj-$(CONFIG_LZO_DECOMPRESS) += lzo/
obj-$(CONFIG_LZ4_COMPRESS) += lz4/
obj-$(CONFIG_LZ4HC_COMPRESS) += lz4/
obj-$(CONFIG_LZ4_DECOMPRESS) += lz4/
obj-$(CONFIG_ZSTD_COMPRESS) += zstd/
obj-$(CONFIG_ZSTD_DECOMPRESS) += zstd/
obj-$(CONFIG_XZ_DEC) += xz/
obj-$(CONFIG_RAID6_PQ) += raid6/
lib-$(CONFIG_DECOMPRESS_GZIP) += decompress_inflate.o
lib-$(CONFIG_DECOMPRESS_BZIP2) += decompress_bunzip2.o
lib-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o
lib-$(CONFIG_DECOMPRESS_XZ) += decompress_unxz.o
lib-$(CONFIG_DECOMPRESS_LZO) += decompress_unlzo.o
lib-$(CONFIG_DECOMPRESS_LZ4) += decompress_unlz4.o
lib-$(CONFIG_DECOMPRESS_ZSTD) += decompress_unzstd.o
obj-$(CONFIG_TEXTSEARCH) += textsearch.o
obj-$(CONFIG_TEXTSEARCH_KMP) += ts_kmp.o
obj-$(CONFIG_TEXTSEARCH_BM) += ts_bm.o
obj-$(CONFIG_TEXTSEARCH_FSM) += ts_fsm.o
obj-$(CONFIG_SMP) += percpu_counter.o
obj-$(CONFIG_AUDIT_GENERIC) += audit.o
obj-$(CONFIG_AUDIT_COMPAT_GENERIC) += compat_audit.o
obj-$(CONFIG_IOMMU_HELPER) += iommu-helper.o
obj-$(CONFIG_FAULT_INJECTION) += fault-inject.o
obj-$(CONFIG_FAULT_INJECTION_USERCOPY) += fault-inject-usercopy.o
obj-$(CONFIG_NOTIFIER_ERROR_INJECTION) += notifier-error-inject.o
obj-$(CONFIG_PM_NOTIFIER_ERROR_INJECT) += pm-notifier-error-inject.o
obj-$(CONFIG_NETDEV_NOTIFIER_ERROR_INJECT) += netdev-notifier-error-inject.o
obj-$(CONFIG_MEMORY_NOTIFIER_ERROR_INJECT) += memory-notifier-error-inject.o
obj-$(CONFIG_OF_RECONFIG_NOTIFIER_ERROR_INJECT) += \
of-reconfig-notifier-error-inject.o
obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o
lib-$(CONFIG_GENERIC_BUG) += bug.o
obj-$(CONFIG_HAVE_ARCH_TRACEHOOK) += syscall.o
obj-$(CONFIG_DYNAMIC_DEBUG_CORE) += dynamic_debug.o
obj-$(CONFIG_SYMBOLIC_ERRNAME) += errname.o
obj-$(CONFIG_NLATTR) += nlattr.o
obj-$(CONFIG_LRU_CACHE) += lru_cache.o
obj-$(CONFIG_GENERIC_CSUM) += checksum.o
obj-$(CONFIG_GENERIC_ATOMIC64) += atomic64.o
obj-$(CONFIG_ATOMIC64_SELFTEST) += atomic64_test.o
obj-$(CONFIG_CPU_RMAP) += cpu_rmap.o
obj-$(CONFIG_DQL) += dynamic_queue_limits.o
obj-$(CONFIG_GLOB) += glob.o
obj-$(CONFIG_GLOB_SELFTEST) += globtest.o
obj-$(CONFIG_MPILIB) += mpi/
obj-$(CONFIG_DIMLIB) += dim/
obj-$(CONFIG_SIGNATURE) += digsig.o
lib-$(CONFIG_CLZ_TAB) += clz_tab.o
obj-$(CONFIG_GENERIC_STRNCPY_FROM_USER) += strncpy_from_user.o
obj-$(CONFIG_GENERIC_STRNLEN_USER) += strnlen_user.o
obj-$(CONFIG_GENERIC_NET_UTILS) += net_utils.o
obj-$(CONFIG_SG_SPLIT) += sg_split.o
obj-$(CONFIG_SG_POOL) += sg_pool.o
obj-$(CONFIG_MEMREGION) += memregion.o
obj-$(CONFIG_STMP_DEVICE) += stmp_device.o
obj-$(CONFIG_IRQ_POLL) += irq_poll.o
# stackdepot.c should not be instrumented or call instrumented functions.
# Prevent the compiler from calling builtins like memcmp() or bcmp() from this
# file.
CFLAGS_stackdepot.o += -fno-builtin
obj-$(CONFIG_STACKDEPOT) += stackdepot.o
KASAN_SANITIZE_stackdepot.o := n
KCOV_INSTRUMENT_stackdepot.o := n
libfdt_files = fdt.o fdt_ro.o fdt_wip.o fdt_rw.o fdt_sw.o fdt_strerror.o \
fdt_empty_tree.o fdt_addresses.o
$(foreach file, $(libfdt_files), \
$(eval CFLAGS_$(file) = -I $(srctree)/scripts/dtc/libfdt))
lib-$(CONFIG_LIBFDT) += $(libfdt_files)
lib-$(CONFIG_BOOT_CONFIG) += bootconfig.o
obj-$(CONFIG_RBTREE_TEST) += rbtree_test.o
obj-$(CONFIG_INTERVAL_TREE_TEST) += interval_tree_test.o
obj-$(CONFIG_PERCPU_TEST) += percpu_test.o
obj-$(CONFIG_ASN1) += asn1_decoder.o
obj-$(CONFIG_FONT_SUPPORT) += fonts/
hostprogs := gen_crc32table
hostprogs += gen_crc64table
clean-files := crc32table.h
clean-files += crc64table.h
$(obj)/crc32.o: $(obj)/crc32table.h
quiet_cmd_crc32 = GEN $@
cmd_crc32 = $< > $@
$(obj)/crc32table.h: $(obj)/gen_crc32table
$(call cmd,crc32)
$(obj)/crc64.o: $(obj)/crc64table.h
quiet_cmd_crc64 = GEN $@
cmd_crc64 = $< > $@
$(obj)/crc64table.h: $(obj)/gen_crc64table
$(call cmd,crc64)
#
# Build a fast OID lookip registry from include/linux/oid_registry.h
#
obj-$(CONFIG_OID_REGISTRY) += oid_registry.o
$(obj)/oid_registry.o: $(obj)/oid_registry_data.c
$(obj)/oid_registry_data.c: $(srctree)/include/linux/oid_registry.h \
$(src)/build_OID_registry
$(call cmd,build_OID_registry)
quiet_cmd_build_OID_registry = GEN $@
cmd_build_OID_registry = perl $(srctree)/$(src)/build_OID_registry $< $@
clean-files += oid_registry_data.c
obj-$(CONFIG_UCS2_STRING) += ucs2_string.o
ifneq ($(CONFIG_UBSAN_TRAP),y)
obj-$(CONFIG_UBSAN) += ubsan.o
endif
UBSAN_SANITIZE_ubsan.o := n
KASAN_SANITIZE_ubsan.o := n
KCSAN_SANITIZE_ubsan.o := n
CFLAGS_ubsan.o := -fno-stack-protector $(DISABLE_STACKLEAK_PLUGIN)
obj-$(CONFIG_SBITMAP) += sbitmap.o
obj-$(CONFIG_PARMAN) += parman.o
# GCC library routines
obj-$(CONFIG_GENERIC_LIB_ASHLDI3) += ashldi3.o
obj-$(CONFIG_GENERIC_LIB_ASHRDI3) += ashrdi3.o
obj-$(CONFIG_GENERIC_LIB_LSHRDI3) += lshrdi3.o
obj-$(CONFIG_GENERIC_LIB_MULDI3) += muldi3.o
obj-$(CONFIG_GENERIC_LIB_CMPDI2) += cmpdi2.o
obj-$(CONFIG_GENERIC_LIB_UCMPDI2) += ucmpdi2.o
obj-$(CONFIG_OBJAGG) += objagg.o
# pldmfw library
obj-$(CONFIG_PLDMFW) += pldmfw/
# KUnit tests
obj-$(CONFIG_BITFIELD_KUNIT) += bitfield_kunit.o
obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o
obj-$(CONFIG_LINEAR_RANGES_TEST) += test_linear_ranges.o
obj-$(CONFIG_BITS_TEST) += test_bits.o
obj-$(CONFIG_CMDLINE_KUNIT_TEST) += cmdline_kunit.o
obj-$(CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED) += devmem_is_allowed.o
View Git Blame Copy Permalink