mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-16 17:23:55 +08:00
3f3d31622a
* adis16400 - Make sure to free memory on a few failure paths. * adxl372 - Fix wrong fifo depth - Fix wrong indexing of data from the fifo. - Perform a reset at startup to avoid a problem with inconsistent state. * axp288 - This is a fix for a fix. The original fix made sure we kept the configuration from some firmwares to preserve a bias current. Unfortunately it appears the previous behaviour was working around a buggy firmware by overwriting the wrong value it had. Hence a regression was seen. * bmc150 - Fix the centre temperature. This was due to an error in one of the datasheets. * hx711 - Fix an issue where a badly timed interrupt could lead to a control line being high long enough to put the device into a low power state. * meson_sar_adc - Fix a case where the irq was enabled before everything it uses was allocated. * st_lsm6dsx - Ensure we don't set the sensor sensitivity to 0 as it will force all readings to 0. - Fix a wait time for the slave i2c controller when the accelerometer is not enabled. * stm32-adc - Precursor for fix. Move a set of register definitions to a header. - Fix a race when several ADCs are in use with some using interrupts to control the dataflow and some using DMA. * vcnl4000 - Fix a garbage of_match_table in which a string was passed instead of the intended enum. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl2eJHgRHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0FojPzA/+KHWytPVz58/DWZ2tRYvfcj4xF3HGEbOV FX1qgDVe1zixHkL8S3R5tNhdCSIl1016tknBv1ZcE1M8BewQF+GE6eyAw+5Gm8Ge 3P1dt17EHfvcOpMBNMP1c9Mp/+OdKs+cSjp8G2MN2O0UGGBQdTPuhC+l4nzmOwCo kbAass0JVTlgxxgcnh6D37Slq4/QqZJBwEmHWEHQJmQfGd+ue+VEdh3XFLPC+gu9 xh63WkubPuzkW2u9iJBDmGedq70pcMbfq6Fj+4YWdxrf0NzNwZIpVaIBRT4/15T0 h+OVFnmFZVRoyiC7WvntIO4/dc3EtxOTTm38OqQpDpy/9DfkI+Nn5Z0bninIU5/x QT8puyyiuoOABHIttDabxSJQphjH3QeoCnWZiaGy/4ZZl1iHQsxF69N4WaDLl8An G/oqy0Zjb1C4pID1RY3jB+kdqRIZD+o0keoSxM2eIt9qcZXIQUHoGNuBXxrHWYis OGxuGci5Vr6IF3KOL3KG08at9JVwFiQRKRebOWn7eCiT8iTqyujHGh2HxBvRvZxq KXMqanTjbbwmv1vl+yMPYwuPPpcMTOxOhhBuT4L0TqYMi2dlnA8BP+YIIZFsOxbg LSJUZn1to9TTkjNCW4q3fTkrlgcBL9MGnQtzAgDzdvnwDqVG7cWYhsYSvxh7hpTN 4EUtoqLKgjI= =s9EA -----END PGP SIGNATURE----- Merge tag 'iio-fixes-for-5.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: First set of IIO fixes for the 5.4 cycle. * adis16400 - Make sure to free memory on a few failure paths. * adxl372 - Fix wrong fifo depth - Fix wrong indexing of data from the fifo. - Perform a reset at startup to avoid a problem with inconsistent state. * axp288 - This is a fix for a fix. The original fix made sure we kept the configuration from some firmwares to preserve a bias current. Unfortunately it appears the previous behaviour was working around a buggy firmware by overwriting the wrong value it had. Hence a regression was seen. * bmc150 - Fix the centre temperature. This was due to an error in one of the datasheets. * hx711 - Fix an issue where a badly timed interrupt could lead to a control line being high long enough to put the device into a low power state. * meson_sar_adc - Fix a case where the irq was enabled before everything it uses was allocated. * st_lsm6dsx - Ensure we don't set the sensor sensitivity to 0 as it will force all readings to 0. - Fix a wait time for the slave i2c controller when the accelerometer is not enabled. * stm32-adc - Precursor for fix. Move a set of register definitions to a header. - Fix a race when several ADCs are in use with some using interrupts to control the dataflow and some using DMA. * vcnl4000 - Fix a garbage of_match_table in which a string was passed instead of the intended enum. * tag 'iio-fixes-for-5.4a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: Fix an undefied reference error in noa1305_probe iio: light: opt3001: fix mutex unlock race iio: adc: ad799x: fix probe error handling iio: light: add missing vcnl4040 of_compatible iio: light: fix vcnl4000 devicetree hooks iio: imu: st_lsm6dsx: fix waitime for st_lsm6dsx i2c controller iio: adc: axp288: Override TS pin bias current for some models iio: imu: adis16400: fix memory leak iio: imu: adis16400: release allocated memory on failure iio: adc: stm32-adc: fix a race when using several adcs with dma and irq iio: adc: stm32-adc: move registers definitions iio: accel: adxl372: Perform a reset at start up iio: accel: adxl372: Fix push to buffers lost samples iio: accel: adxl372: Fix/remove limitation for FIFO samples iio: adc: hx711: fix bug in sampling of data iio: fix center temperature of bmc150-accel-core iio: imu: st_lsm6dsx: forbid 0 sensor sensitivity iio: adc: meson_saradc: Fix memory allocation order |
||
---|---|---|
.. | ||
ad799x.c | ||
ad7124.c | ||
ad7266.c | ||
ad7291.c | ||
ad7298.c | ||
ad7476.c | ||
ad7606_par.c | ||
ad7606_spi.c | ||
ad7606.c | ||
ad7606.h | ||
ad7766.c | ||
ad7768-1.c | ||
ad7780.c | ||
ad7791.c | ||
ad7793.c | ||
ad7887.c | ||
ad7923.c | ||
ad7949.c | ||
ad_sigma_delta.c | ||
aspeed_adc.c | ||
at91_adc.c | ||
at91-sama5d2_adc.c | ||
axp20x_adc.c | ||
axp288_adc.c | ||
bcm_iproc_adc.c | ||
berlin2-adc.c | ||
cc10001_adc.c | ||
cpcap-adc.c | ||
da9150-gpadc.c | ||
dln2-adc.c | ||
envelope-detector.c | ||
ep93xx_adc.c | ||
exynos_adc.c | ||
fsl-imx25-gcq.c | ||
hi8435.c | ||
hx711.c | ||
imx7d_adc.c | ||
ina2xx-adc.c | ||
ingenic-adc.c | ||
Kconfig | ||
lp8788_adc.c | ||
lpc18xx_adc.c | ||
lpc32xx_adc.c | ||
ltc2471.c | ||
ltc2485.c | ||
ltc2497.c | ||
Makefile | ||
max1027.c | ||
max1118.c | ||
max1363.c | ||
max9611.c | ||
max11100.c | ||
mcp320x.c | ||
mcp3422.c | ||
mcp3911.c | ||
men_z188_adc.c | ||
meson_saradc.c | ||
mt6577_auxadc.c | ||
mxs-lradc-adc.c | ||
nau7802.c | ||
npcm_adc.c | ||
palmas_gpadc.c | ||
qcom-pm8xxx-xoadc.c | ||
qcom-spmi-adc5.c | ||
qcom-spmi-iadc.c | ||
qcom-spmi-vadc.c | ||
qcom-vadc-common.c | ||
qcom-vadc-common.h | ||
rcar-gyroadc.c | ||
rockchip_saradc.c | ||
sc27xx_adc.c | ||
sd_adc_modulator.c | ||
spear_adc.c | ||
stm32-adc-core.c | ||
stm32-adc-core.h | ||
stm32-adc.c | ||
stm32-dfsdm-adc.c | ||
stm32-dfsdm-core.c | ||
stm32-dfsdm.h | ||
stmpe-adc.c | ||
stx104.c | ||
sun4i-gpadc-iio.c | ||
ti_am335x_adc.c | ||
ti-adc081c.c | ||
ti-adc084s021.c | ||
ti-adc108s102.c | ||
ti-adc128s052.c | ||
ti-adc161s626.c | ||
ti-adc0832.c | ||
ti-adc12138.c | ||
ti-ads124s08.c | ||
ti-ads1015.c | ||
ti-ads7950.c | ||
ti-ads8344.c | ||
ti-ads8688.c | ||
ti-tlc4541.c | ||
twl4030-madc.c | ||
twl6030-gpadc.c | ||
vf610_adc.c | ||
viperboard_adc.c | ||
xilinx-xadc-core.c | ||
xilinx-xadc-events.c | ||
xilinx-xadc.h |