Loys Ollivier d4584bbfcf gnss: add driver for mediatek receivers ... Add driver for serial-connected Mediatek-based GNSS receivers. These devices typically boot transmitting vendor specific NMEA output sequences. The serial port bit rate is read from the device tree "current-speed". Note that the driver uses the generic GNSS serial implementation and therefore essentially only manages power abstracted into three power states: ACTIVE, STANDBY, and OFF. For mediatek receivers with a main supply and no enable-gpios, this simply means that the main supply is disabled in STANDBY and OFF (the optional backup supply is kept enabled while the driver is bound). Note that the timepulse-support is left unimplemented. Signed-off-by: Loys Ollivier <lollivier@baylibre.com> [ johan: rename backup supply ] Signed-off-by: Johan Hovold <johan@kernel.org>		2019-02-15 16:54:38 +01:00
..
core.c	gnss: add mtk receiver type support	2019-02-15 16:54:38 +01:00
Kconfig	gnss: add driver for mediatek receivers	2019-02-15 16:54:38 +01:00
Makefile	gnss: add driver for mediatek receivers	2019-02-15 16:54:38 +01:00
mtk.c	gnss: add driver for mediatek receivers	2019-02-15 16:54:38 +01:00
serial.c	serdev: make synchronous write return bytes written	2018-11-27 19:44:21 +01:00
serial.h
sirf.c	gnss: sirf: add a separate supply for a lna	2019-01-25 12:07:42 +01:00
ubx.c	gnss: ubx: make struct ubx_gserial_ops static	2018-07-16 12:48:07 +02:00