mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-28 15:13:55 +08:00
dbc0416104
As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
118 lines
3.4 KiB
C
118 lines
3.4 KiB
C
/*
|
|
* OMAP 32ksynctimer/counter_32k-related code
|
|
*
|
|
* Copyright (C) 2009 Texas Instruments
|
|
* Copyright (C) 2010 Nokia Corporation
|
|
* Tony Lindgren <tony@atomide.com>
|
|
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* NOTE: This timer is not the same timer as the old OMAP1 MPU timer.
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/clocksource.h>
|
|
|
|
#include <asm/mach/time.h>
|
|
#include <asm/sched_clock.h>
|
|
|
|
#include <plat/common.h>
|
|
#include <plat/clock.h>
|
|
|
|
/* OMAP2_32KSYNCNT_CR_OFF: offset of 32ksync counter register */
|
|
#define OMAP2_32KSYNCNT_REV_OFF 0x0
|
|
#define OMAP2_32KSYNCNT_REV_SCHEME (0x3 << 30)
|
|
#define OMAP2_32KSYNCNT_CR_OFF_LOW 0x10
|
|
#define OMAP2_32KSYNCNT_CR_OFF_HIGH 0x30
|
|
|
|
/*
|
|
* 32KHz clocksource ... always available, on pretty most chips except
|
|
* OMAP 730 and 1510. Other timers could be used as clocksources, with
|
|
* higher resolution in free-running counter modes (e.g. 12 MHz xtal),
|
|
* but systems won't necessarily want to spend resources that way.
|
|
*/
|
|
static void __iomem *sync32k_cnt_reg;
|
|
|
|
static u32 notrace omap_32k_read_sched_clock(void)
|
|
{
|
|
return sync32k_cnt_reg ? __raw_readl(sync32k_cnt_reg) : 0;
|
|
}
|
|
|
|
/**
|
|
* omap_read_persistent_clock - Return time from a persistent clock.
|
|
*
|
|
* Reads the time from a source which isn't disabled during PM, the
|
|
* 32k sync timer. Convert the cycles elapsed since last read into
|
|
* nsecs and adds to a monotonically increasing timespec.
|
|
*/
|
|
static struct timespec persistent_ts;
|
|
static cycles_t cycles, last_cycles;
|
|
static unsigned int persistent_mult, persistent_shift;
|
|
static void omap_read_persistent_clock(struct timespec *ts)
|
|
{
|
|
unsigned long long nsecs;
|
|
cycles_t delta;
|
|
struct timespec *tsp = &persistent_ts;
|
|
|
|
last_cycles = cycles;
|
|
cycles = sync32k_cnt_reg ? __raw_readl(sync32k_cnt_reg) : 0;
|
|
delta = cycles - last_cycles;
|
|
|
|
nsecs = clocksource_cyc2ns(delta, persistent_mult, persistent_shift);
|
|
|
|
timespec_add_ns(tsp, nsecs);
|
|
*ts = *tsp;
|
|
}
|
|
|
|
/**
|
|
* omap_init_clocksource_32k - setup and register counter 32k as a
|
|
* kernel clocksource
|
|
* @pbase: base addr of counter_32k module
|
|
* @size: size of counter_32k to map
|
|
*
|
|
* Returns 0 upon success or negative error code upon failure.
|
|
*
|
|
*/
|
|
int __init omap_init_clocksource_32k(void __iomem *vbase)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* 32k sync Counter IP register offsets vary between the
|
|
* highlander version and the legacy ones.
|
|
* The 'SCHEME' bits(30-31) of the revision register is used
|
|
* to identify the version.
|
|
*/
|
|
if (__raw_readl(vbase + OMAP2_32KSYNCNT_REV_OFF) &
|
|
OMAP2_32KSYNCNT_REV_SCHEME)
|
|
sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_HIGH;
|
|
else
|
|
sync32k_cnt_reg = vbase + OMAP2_32KSYNCNT_CR_OFF_LOW;
|
|
|
|
/*
|
|
* 120000 rough estimate from the calculations in
|
|
* __clocksource_updatefreq_scale.
|
|
*/
|
|
clocks_calc_mult_shift(&persistent_mult, &persistent_shift,
|
|
32768, NSEC_PER_SEC, 120000);
|
|
|
|
ret = clocksource_mmio_init(sync32k_cnt_reg, "32k_counter", 32768,
|
|
250, 32, clocksource_mmio_readl_up);
|
|
if (ret) {
|
|
pr_err("32k_counter: can't register clocksource\n");
|
|
return ret;
|
|
}
|
|
|
|
setup_sched_clock(omap_32k_read_sched_clock, 32, 32768);
|
|
register_persistent_clock(NULL, omap_read_persistent_clock);
|
|
pr_info("OMAP clocksource: 32k_counter at 32768 Hz\n");
|
|
|
|
return 0;
|
|
}
|