2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 06:34:11 +08:00
linux-next/drivers/net/wireless/rtlwifi/rc.c
Larry Finger 0f01545346 rtlwifi: rtl8192ce: rtl8192cu: rtl8192se: rtl81723ae: Turn on building of the new driver
This patch completes the addition of the new driver for the Realtek
RTL8723AE devices by adding the make file and by modifying Kconfig
and Makefile of rtlwifi. Some variable names were shortened to ease
the problem of limiting all lines to 80 characters, thus changes were
made to wifi.h and rtl8192{ce,cu,sw}/hw.c.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: <chaoming_li@realsil.com.cn>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-14 14:55:31 -05:00

292 lines
7.7 KiB
C

/******************************************************************************
*
* Copyright(c) 2009-2012 Realtek Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* wlanfae <wlanfae@realtek.com>
* Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
* Hsinchu 300, Taiwan.
*
* Larry Finger <Larry.Finger@lwfinger.net>
*
*****************************************************************************/
#include "wifi.h"
#include "base.h"
#include "rc.h"
/*
*Finds the highest rate index we can use
*if skb is special data like DHCP/EAPOL, we set should
*it to lowest rate CCK_1M, otherwise we set rate to
*CCK11M or OFDM_54M based on wireless mode.
*/
static u8 _rtl_rc_get_highest_rix(struct rtl_priv *rtlpriv,
struct ieee80211_sta *sta,
struct sk_buff *skb, bool not_data)
{
struct rtl_mac *rtlmac = rtl_mac(rtlpriv);
struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
struct rtl_phy *rtlphy = &(rtlpriv->phy);
struct rtl_sta_info *sta_entry = NULL;
u8 wireless_mode = 0;
/*
*this rate is no use for true rate, firmware
*will control rate at all it just used for
*1.show in iwconfig in B/G mode
*2.in rtl_get_tcb_desc when we check rate is
* 1M we will not use FW rate but user rate.
*/
if (rtlmac->opmode == NL80211_IFTYPE_AP ||
rtlmac->opmode == NL80211_IFTYPE_ADHOC ||
rtlmac->opmode == NL80211_IFTYPE_MESH_POINT) {
if (sta) {
sta_entry = (struct rtl_sta_info *) sta->drv_priv;
wireless_mode = sta_entry->wireless_mode;
} else {
return 0;
}
} else {
wireless_mode = rtlmac->mode;
}
if (rtl_is_special_data(rtlpriv->mac80211.hw, skb, true) ||
not_data) {
return 0;
} else {
if (rtlhal->current_bandtype == BAND_ON_2_4G) {
if (wireless_mode == WIRELESS_MODE_B) {
return B_MODE_MAX_RIX;
} else if (wireless_mode == WIRELESS_MODE_G) {
return G_MODE_MAX_RIX;
} else {
if (get_rf_type(rtlphy) != RF_2T2R)
return N_MODE_MCS7_RIX;
else
return N_MODE_MCS15_RIX;
}
} else {
if (wireless_mode == WIRELESS_MODE_A) {
return A_MODE_MAX_RIX;
} else {
if (get_rf_type(rtlphy) != RF_2T2R)
return N_MODE_MCS7_RIX;
else
return N_MODE_MCS15_RIX;
}
}
}
}
static void _rtl_rc_rate_set_series(struct rtl_priv *rtlpriv,
struct ieee80211_sta *sta,
struct ieee80211_tx_rate *rate,
struct ieee80211_tx_rate_control *txrc,
u8 tries, char rix, int rtsctsenable,
bool not_data)
{
struct rtl_mac *mac = rtl_mac(rtlpriv);
u8 sgi_20 = 0, sgi_40 = 0;
if (sta) {
sgi_20 = sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20;
sgi_40 = sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40;
}
rate->count = tries;
rate->idx = rix >= 0x00 ? rix : 0x00;
if (!not_data) {
if (txrc->short_preamble)
rate->flags |= IEEE80211_TX_RC_USE_SHORT_PREAMBLE;
if (mac->opmode == NL80211_IFTYPE_AP ||
mac->opmode == NL80211_IFTYPE_ADHOC) {
if (sta && (sta->ht_cap.cap &
IEEE80211_HT_CAP_SUP_WIDTH_20_40))
rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
} else {
if (mac->bw_40)
rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
}
if (sgi_20 || sgi_40)
rate->flags |= IEEE80211_TX_RC_SHORT_GI;
if (sta && sta->ht_cap.ht_supported)
rate->flags |= IEEE80211_TX_RC_MCS;
}
}
static void rtl_get_rate(void *ppriv, struct ieee80211_sta *sta,
void *priv_sta, struct ieee80211_tx_rate_control *txrc)
{
struct rtl_priv *rtlpriv = ppriv;
struct sk_buff *skb = txrc->skb;
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
struct ieee80211_tx_rate *rates = tx_info->control.rates;
__le16 fc = rtl_get_fc(skb);
u8 try_per_rate, i, rix;
bool not_data = !ieee80211_is_data(fc);
if (rate_control_send_low(sta, priv_sta, txrc))
return;
rix = _rtl_rc_get_highest_rix(rtlpriv, sta, skb, not_data);
try_per_rate = 1;
_rtl_rc_rate_set_series(rtlpriv, sta, &rates[0], txrc,
try_per_rate, rix, 1, not_data);
if (!not_data) {
for (i = 1; i < 4; i++)
_rtl_rc_rate_set_series(rtlpriv, sta, &rates[i],
txrc, i, (rix - i), 1,
not_data);
}
}
static bool _rtl_tx_aggr_check(struct rtl_priv *rtlpriv,
struct rtl_sta_info *sta_entry, u16 tid)
{
struct rtl_mac *mac = rtl_mac(rtlpriv);
if (mac->act_scanning)
return false;
if (mac->opmode == NL80211_IFTYPE_STATION &&
mac->cnt_after_linked < 3)
return false;
if (sta_entry->tids[tid].agg.agg_state == RTL_AGG_STOP)
return true;
return false;
}
/*mac80211 Rate Control callbacks*/
static void rtl_tx_status(void *ppriv,
struct ieee80211_supported_band *sband,
struct ieee80211_sta *sta, void *priv_sta,
struct sk_buff *skb)
{
struct rtl_priv *rtlpriv = ppriv;
struct rtl_mac *mac = rtl_mac(rtlpriv);
struct ieee80211_hdr *hdr = rtl_get_hdr(skb);
__le16 fc = rtl_get_fc(skb);
struct rtl_sta_info *sta_entry;
if (!priv_sta || !ieee80211_is_data(fc))
return;
if (rtl_is_special_data(mac->hw, skb, true))
return;
if (is_multicast_ether_addr(ieee80211_get_DA(hdr))
|| is_broadcast_ether_addr(ieee80211_get_DA(hdr)))
return;
if (sta) {
/* Check if aggregation has to be enabled for this tid */
sta_entry = (struct rtl_sta_info *) sta->drv_priv;
if ((sta->ht_cap.ht_supported) &&
!(skb->protocol == cpu_to_be16(ETH_P_PAE))) {
if (ieee80211_is_data_qos(fc)) {
u8 tid = rtl_get_tid(skb);
if (_rtl_tx_aggr_check(rtlpriv, sta_entry,
tid)) {
sta_entry->tids[tid].agg.agg_state =
RTL_AGG_PROGRESS;
ieee80211_start_tx_ba_session(sta,
tid, 5000);
}
}
}
}
}
static void rtl_rate_init(void *ppriv,
struct ieee80211_supported_band *sband,
struct ieee80211_sta *sta, void *priv_sta)
{
}
static void rtl_rate_update(void *ppriv,
struct ieee80211_supported_band *sband,
struct ieee80211_sta *sta, void *priv_sta,
u32 changed)
{
}
static void *rtl_rate_alloc(struct ieee80211_hw *hw,
struct dentry *debugfsdir)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
return rtlpriv;
}
static void rtl_rate_free(void *rtlpriv)
{
return;
}
static void *rtl_rate_alloc_sta(void *ppriv,
struct ieee80211_sta *sta, gfp_t gfp)
{
struct rtl_priv *rtlpriv = ppriv;
struct rtl_rate_priv *rate_priv;
rate_priv = kzalloc(sizeof(struct rtl_rate_priv), gfp);
if (!rate_priv) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
"Unable to allocate private rc structure\n");
return NULL;
}
rtlpriv->rate_priv = rate_priv;
return rate_priv;
}
static void rtl_rate_free_sta(void *rtlpriv,
struct ieee80211_sta *sta, void *priv_sta)
{
struct rtl_rate_priv *rate_priv = priv_sta;
kfree(rate_priv);
}
static struct rate_control_ops rtl_rate_ops = {
.module = NULL,
.name = "rtl_rc",
.alloc = rtl_rate_alloc,
.free = rtl_rate_free,
.alloc_sta = rtl_rate_alloc_sta,
.free_sta = rtl_rate_free_sta,
.rate_init = rtl_rate_init,
.rate_update = rtl_rate_update,
.tx_status = rtl_tx_status,
.get_rate = rtl_get_rate,
};
int rtl_rate_control_register(void)
{
return ieee80211_rate_control_register(&rtl_rate_ops);
}
void rtl_rate_control_unregister(void)
{
ieee80211_rate_control_unregister(&rtl_rate_ops);
}