2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 22:53:55 +08:00
linux-next/drivers/net/mdio/mdio-mscc-miim.c
Andrew Lunn a9770eac51 net: mdio: Move MDIO drivers into a new subdirectory
Move all the MDIO drivers and multiplexers into drivers/net/mdio.  The
mdio core is however left in the phy directory, due to mutual
dependencies between the MDIO core and the PHY core.

Take this opportunity to sort the Kconfig based on the menuconfig
strings, and move the multiplexers to the end with a separating
comment.

v2:
Fix typo in commit message

Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-27 06:55:50 -07:00

213 lines
5.2 KiB
C

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Driver for the MDIO interface of Microsemi network switches.
*
* Author: Alexandre Belloni <alexandre.belloni@bootlin.com>
* Copyright (c) 2017 Microsemi Corporation
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/phy.h>
#include <linux/platform_device.h>
#include <linux/bitops.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/of_mdio.h>
#define MSCC_MIIM_REG_STATUS 0x0
#define MSCC_MIIM_STATUS_STAT_PENDING BIT(2)
#define MSCC_MIIM_STATUS_STAT_BUSY BIT(3)
#define MSCC_MIIM_REG_CMD 0x8
#define MSCC_MIIM_CMD_OPR_WRITE BIT(1)
#define MSCC_MIIM_CMD_OPR_READ BIT(2)
#define MSCC_MIIM_CMD_WRDATA_SHIFT 4
#define MSCC_MIIM_CMD_REGAD_SHIFT 20
#define MSCC_MIIM_CMD_PHYAD_SHIFT 25
#define MSCC_MIIM_CMD_VLD BIT(31)
#define MSCC_MIIM_REG_DATA 0xC
#define MSCC_MIIM_DATA_ERROR (BIT(16) | BIT(17))
#define MSCC_PHY_REG_PHY_CFG 0x0
#define PHY_CFG_PHY_ENA (BIT(0) | BIT(1) | BIT(2) | BIT(3))
#define PHY_CFG_PHY_COMMON_RESET BIT(4)
#define PHY_CFG_PHY_RESET (BIT(5) | BIT(6) | BIT(7) | BIT(8))
#define MSCC_PHY_REG_PHY_STATUS 0x4
struct mscc_miim_dev {
void __iomem *regs;
void __iomem *phy_regs;
};
/* When high resolution timers aren't built-in: we can't use usleep_range() as
* we would sleep way too long. Use udelay() instead.
*/
#define mscc_readl_poll_timeout(addr, val, cond, delay_us, timeout_us) \
({ \
if (!IS_ENABLED(CONFIG_HIGH_RES_TIMERS)) \
readl_poll_timeout_atomic(addr, val, cond, delay_us, \
timeout_us); \
readl_poll_timeout(addr, val, cond, delay_us, timeout_us); \
})
static int mscc_miim_wait_ready(struct mii_bus *bus)
{
struct mscc_miim_dev *miim = bus->priv;
u32 val;
return mscc_readl_poll_timeout(miim->regs + MSCC_MIIM_REG_STATUS, val,
!(val & MSCC_MIIM_STATUS_STAT_BUSY), 50,
10000);
}
static int mscc_miim_wait_pending(struct mii_bus *bus)
{
struct mscc_miim_dev *miim = bus->priv;
u32 val;
return mscc_readl_poll_timeout(miim->regs + MSCC_MIIM_REG_STATUS, val,
!(val & MSCC_MIIM_STATUS_STAT_PENDING),
50, 10000);
}
static int mscc_miim_read(struct mii_bus *bus, int mii_id, int regnum)
{
struct mscc_miim_dev *miim = bus->priv;
u32 val;
int ret;
ret = mscc_miim_wait_pending(bus);
if (ret)
goto out;
writel(MSCC_MIIM_CMD_VLD | (mii_id << MSCC_MIIM_CMD_PHYAD_SHIFT) |
(regnum << MSCC_MIIM_CMD_REGAD_SHIFT) | MSCC_MIIM_CMD_OPR_READ,
miim->regs + MSCC_MIIM_REG_CMD);
ret = mscc_miim_wait_ready(bus);
if (ret)
goto out;
val = readl(miim->regs + MSCC_MIIM_REG_DATA);
if (val & MSCC_MIIM_DATA_ERROR) {
ret = -EIO;
goto out;
}
ret = val & 0xFFFF;
out:
return ret;
}
static int mscc_miim_write(struct mii_bus *bus, int mii_id,
int regnum, u16 value)
{
struct mscc_miim_dev *miim = bus->priv;
int ret;
ret = mscc_miim_wait_pending(bus);
if (ret < 0)
goto out;
writel(MSCC_MIIM_CMD_VLD | (mii_id << MSCC_MIIM_CMD_PHYAD_SHIFT) |
(regnum << MSCC_MIIM_CMD_REGAD_SHIFT) |
(value << MSCC_MIIM_CMD_WRDATA_SHIFT) |
MSCC_MIIM_CMD_OPR_WRITE,
miim->regs + MSCC_MIIM_REG_CMD);
out:
return ret;
}
static int mscc_miim_reset(struct mii_bus *bus)
{
struct mscc_miim_dev *miim = bus->priv;
if (miim->phy_regs) {
writel(0, miim->phy_regs + MSCC_PHY_REG_PHY_CFG);
writel(0x1ff, miim->phy_regs + MSCC_PHY_REG_PHY_CFG);
mdelay(500);
}
return 0;
}
static int mscc_miim_probe(struct platform_device *pdev)
{
struct resource *res;
struct mii_bus *bus;
struct mscc_miim_dev *dev;
int ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res)
return -ENODEV;
bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(*dev));
if (!bus)
return -ENOMEM;
bus->name = "mscc_miim";
bus->read = mscc_miim_read;
bus->write = mscc_miim_write;
bus->reset = mscc_miim_reset;
snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(&pdev->dev));
bus->parent = &pdev->dev;
dev = bus->priv;
dev->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(dev->regs)) {
dev_err(&pdev->dev, "Unable to map MIIM registers\n");
return PTR_ERR(dev->regs);
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
if (res) {
dev->phy_regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(dev->phy_regs)) {
dev_err(&pdev->dev, "Unable to map internal phy registers\n");
return PTR_ERR(dev->phy_regs);
}
}
ret = of_mdiobus_register(bus, pdev->dev.of_node);
if (ret < 0) {
dev_err(&pdev->dev, "Cannot register MDIO bus (%d)\n", ret);
return ret;
}
platform_set_drvdata(pdev, bus);
return 0;
}
static int mscc_miim_remove(struct platform_device *pdev)
{
struct mii_bus *bus = platform_get_drvdata(pdev);
mdiobus_unregister(bus);
return 0;
}
static const struct of_device_id mscc_miim_match[] = {
{ .compatible = "mscc,ocelot-miim" },
{ }
};
MODULE_DEVICE_TABLE(of, mscc_miim_match);
static struct platform_driver mscc_miim_driver = {
.probe = mscc_miim_probe,
.remove = mscc_miim_remove,
.driver = {
.name = "mscc-miim",
.of_match_table = mscc_miim_match,
},
};
module_platform_driver(mscc_miim_driver);
MODULE_DESCRIPTION("Microsemi MIIM driver");
MODULE_AUTHOR("Alexandre Belloni <alexandre.belloni@bootlin.com>");
MODULE_LICENSE("Dual MIT/GPL");