mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 22:53:55 +08:00
f80531c821
Modules with multiple authors should use multiple MODULE_AUTHOR() statements according to comment in include/linux/module.h. Split the i2c modules with multiple authors to use multiple MODULE_AUTHOR() statements. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
939 lines
27 KiB
C
939 lines
27 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* SuperH Mobile I2C Controller
|
|
*
|
|
* Copyright (C) 2014-19 Wolfram Sang <wsa@sang-engineering.com>
|
|
* Copyright (C) 2008 Magnus Damm
|
|
*
|
|
* Portions of the code based on out-of-tree driver i2c-sh7343.c
|
|
* Copyright (c) 2006 Carlos Munoz <carlos@kenati.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dmaengine.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/err.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* Transmit operation: */
|
|
/* */
|
|
/* 0 byte transmit */
|
|
/* BUS: S A8 ACK P(*) */
|
|
/* IRQ: DTE WAIT */
|
|
/* ICIC: */
|
|
/* ICCR: 0x94 0x90 */
|
|
/* ICDR: A8 */
|
|
/* */
|
|
/* 1 byte transmit */
|
|
/* BUS: S A8 ACK D8(1) ACK P(*) */
|
|
/* IRQ: DTE WAIT WAIT */
|
|
/* ICIC: -DTE */
|
|
/* ICCR: 0x94 0x90 */
|
|
/* ICDR: A8 D8(1) */
|
|
/* */
|
|
/* 2 byte transmit */
|
|
/* BUS: S A8 ACK D8(1) ACK D8(2) ACK P(*) */
|
|
/* IRQ: DTE WAIT WAIT WAIT */
|
|
/* ICIC: -DTE */
|
|
/* ICCR: 0x94 0x90 */
|
|
/* ICDR: A8 D8(1) D8(2) */
|
|
/* */
|
|
/* 3 bytes or more, +---------+ gets repeated */
|
|
/* */
|
|
/* */
|
|
/* Receive operation: */
|
|
/* */
|
|
/* 0 byte receive - not supported since slave may hold SDA low */
|
|
/* */
|
|
/* 1 byte receive [TX] | [RX] */
|
|
/* BUS: S A8 ACK | D8(1) ACK P(*) */
|
|
/* IRQ: DTE WAIT | WAIT DTE */
|
|
/* ICIC: -DTE | +DTE */
|
|
/* ICCR: 0x94 0x81 | 0xc0 */
|
|
/* ICDR: A8 | D8(1) */
|
|
/* */
|
|
/* 2 byte receive [TX]| [RX] */
|
|
/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK P(*) */
|
|
/* IRQ: DTE WAIT | WAIT WAIT DTE */
|
|
/* ICIC: -DTE | +DTE */
|
|
/* ICCR: 0x94 0x81 | 0xc0 */
|
|
/* ICDR: A8 | D8(1) D8(2) */
|
|
/* */
|
|
/* 3 byte receive [TX] | [RX] (*) */
|
|
/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK D8(3) ACK P */
|
|
/* IRQ: DTE WAIT | WAIT WAIT WAIT DTE */
|
|
/* ICIC: -DTE | +DTE */
|
|
/* ICCR: 0x94 0x81 | 0xc0 */
|
|
/* ICDR: A8 | D8(1) D8(2) D8(3) */
|
|
/* */
|
|
/* 4 bytes or more, this part is repeated +---------+ */
|
|
/* */
|
|
/* */
|
|
/* Interrupt order and BUSY flag */
|
|
/* ___ _ */
|
|
/* SDA ___\___XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXAAAAAAAAA___/ */
|
|
/* SCL \_/1\_/2\_/3\_/4\_/5\_/6\_/7\_/8\___/9\_____/ */
|
|
/* */
|
|
/* S D7 D6 D5 D4 D3 D2 D1 D0 P(*) */
|
|
/* ___ */
|
|
/* WAIT IRQ ________________________________/ \___________ */
|
|
/* TACK IRQ ____________________________________/ \_______ */
|
|
/* DTE IRQ __________________________________________/ \_ */
|
|
/* AL IRQ XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX */
|
|
/* _______________________________________________ */
|
|
/* BUSY __/ \_ */
|
|
/* */
|
|
/* (*) The STOP condition is only sent by the master at the end of the last */
|
|
/* I2C message or if the I2C_M_STOP flag is set. Similarly, the BUSY bit is */
|
|
/* only cleared after the STOP condition, so, between messages we have to */
|
|
/* poll for the DTE bit. */
|
|
/* */
|
|
|
|
enum sh_mobile_i2c_op {
|
|
OP_START = 0,
|
|
OP_TX_FIRST,
|
|
OP_TX,
|
|
OP_TX_STOP,
|
|
OP_TX_TO_RX,
|
|
OP_RX,
|
|
OP_RX_STOP,
|
|
OP_RX_STOP_DATA,
|
|
};
|
|
|
|
struct sh_mobile_i2c_data {
|
|
struct device *dev;
|
|
void __iomem *reg;
|
|
struct i2c_adapter adap;
|
|
unsigned long bus_speed;
|
|
unsigned int clks_per_count;
|
|
struct clk *clk;
|
|
u_int8_t icic;
|
|
u_int8_t flags;
|
|
u_int16_t iccl;
|
|
u_int16_t icch;
|
|
|
|
spinlock_t lock;
|
|
wait_queue_head_t wait;
|
|
struct i2c_msg *msg;
|
|
int pos;
|
|
int sr;
|
|
bool send_stop;
|
|
bool stop_after_dma;
|
|
|
|
struct resource *res;
|
|
struct dma_chan *dma_tx;
|
|
struct dma_chan *dma_rx;
|
|
struct scatterlist sg;
|
|
enum dma_data_direction dma_direction;
|
|
u8 *dma_buf;
|
|
};
|
|
|
|
struct sh_mobile_dt_config {
|
|
int clks_per_count;
|
|
int (*setup)(struct sh_mobile_i2c_data *pd);
|
|
};
|
|
|
|
#define IIC_FLAG_HAS_ICIC67 (1 << 0)
|
|
|
|
/* Register offsets */
|
|
#define ICDR 0x00
|
|
#define ICCR 0x04
|
|
#define ICSR 0x08
|
|
#define ICIC 0x0c
|
|
#define ICCL 0x10
|
|
#define ICCH 0x14
|
|
#define ICSTART 0x70
|
|
|
|
/* Register bits */
|
|
#define ICCR_ICE 0x80
|
|
#define ICCR_RACK 0x40
|
|
#define ICCR_TRS 0x10
|
|
#define ICCR_BBSY 0x04
|
|
#define ICCR_SCP 0x01
|
|
|
|
#define ICSR_SCLM 0x80
|
|
#define ICSR_SDAM 0x40
|
|
#define SW_DONE 0x20
|
|
#define ICSR_BUSY 0x10
|
|
#define ICSR_AL 0x08
|
|
#define ICSR_TACK 0x04
|
|
#define ICSR_WAIT 0x02
|
|
#define ICSR_DTE 0x01
|
|
|
|
#define ICIC_ICCLB8 0x80
|
|
#define ICIC_ICCHB8 0x40
|
|
#define ICIC_TDMAE 0x20
|
|
#define ICIC_RDMAE 0x10
|
|
#define ICIC_ALE 0x08
|
|
#define ICIC_TACKE 0x04
|
|
#define ICIC_WAITE 0x02
|
|
#define ICIC_DTEE 0x01
|
|
|
|
#define ICSTART_ICSTART 0x10
|
|
|
|
static void iic_wr(struct sh_mobile_i2c_data *pd, int offs, unsigned char data)
|
|
{
|
|
if (offs == ICIC)
|
|
data |= pd->icic;
|
|
|
|
iowrite8(data, pd->reg + offs);
|
|
}
|
|
|
|
static unsigned char iic_rd(struct sh_mobile_i2c_data *pd, int offs)
|
|
{
|
|
return ioread8(pd->reg + offs);
|
|
}
|
|
|
|
static void iic_set_clr(struct sh_mobile_i2c_data *pd, int offs,
|
|
unsigned char set, unsigned char clr)
|
|
{
|
|
iic_wr(pd, offs, (iic_rd(pd, offs) | set) & ~clr);
|
|
}
|
|
|
|
static u32 sh_mobile_i2c_iccl(unsigned long count_khz, u32 tLOW, u32 tf)
|
|
{
|
|
/*
|
|
* Conditional expression:
|
|
* ICCL >= COUNT_CLK * (tLOW + tf)
|
|
*
|
|
* SH-Mobile IIC hardware starts counting the LOW period of
|
|
* the SCL signal (tLOW) as soon as it pulls the SCL line.
|
|
* In order to meet the tLOW timing spec, we need to take into
|
|
* account the fall time of SCL signal (tf). Default tf value
|
|
* should be 0.3 us, for safety.
|
|
*/
|
|
return (((count_khz * (tLOW + tf)) + 5000) / 10000);
|
|
}
|
|
|
|
static u32 sh_mobile_i2c_icch(unsigned long count_khz, u32 tHIGH, u32 tf)
|
|
{
|
|
/*
|
|
* Conditional expression:
|
|
* ICCH >= COUNT_CLK * (tHIGH + tf)
|
|
*
|
|
* SH-Mobile IIC hardware is aware of SCL transition period 'tr',
|
|
* and can ignore it. SH-Mobile IIC controller starts counting
|
|
* the HIGH period of the SCL signal (tHIGH) after the SCL input
|
|
* voltage increases at VIH.
|
|
*
|
|
* Afterward it turned out calculating ICCH using only tHIGH spec
|
|
* will result in violation of the tHD;STA timing spec. We need
|
|
* to take into account the fall time of SDA signal (tf) at START
|
|
* condition, in order to meet both tHIGH and tHD;STA specs.
|
|
*/
|
|
return (((count_khz * (tHIGH + tf)) + 5000) / 10000);
|
|
}
|
|
|
|
static int sh_mobile_i2c_check_timing(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
u16 max_val = pd->flags & IIC_FLAG_HAS_ICIC67 ? 0x1ff : 0xff;
|
|
|
|
if (pd->iccl > max_val || pd->icch > max_val) {
|
|
dev_err(pd->dev, "timing values out of range: L/H=0x%x/0x%x\n",
|
|
pd->iccl, pd->icch);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* one more bit of ICCL in ICIC */
|
|
if (pd->iccl & 0x100)
|
|
pd->icic |= ICIC_ICCLB8;
|
|
else
|
|
pd->icic &= ~ICIC_ICCLB8;
|
|
|
|
/* one more bit of ICCH in ICIC */
|
|
if (pd->icch & 0x100)
|
|
pd->icic |= ICIC_ICCHB8;
|
|
else
|
|
pd->icic &= ~ICIC_ICCHB8;
|
|
|
|
dev_dbg(pd->dev, "timing values: L/H=0x%x/0x%x\n", pd->iccl, pd->icch);
|
|
return 0;
|
|
}
|
|
|
|
static int sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
unsigned long i2c_clk_khz;
|
|
u32 tHIGH, tLOW, tf;
|
|
|
|
i2c_clk_khz = clk_get_rate(pd->clk) / 1000 / pd->clks_per_count;
|
|
|
|
if (pd->bus_speed == I2C_MAX_STANDARD_MODE_FREQ) {
|
|
tLOW = 47; /* tLOW = 4.7 us */
|
|
tHIGH = 40; /* tHD;STA = tHIGH = 4.0 us */
|
|
tf = 3; /* tf = 0.3 us */
|
|
} else if (pd->bus_speed == I2C_MAX_FAST_MODE_FREQ) {
|
|
tLOW = 13; /* tLOW = 1.3 us */
|
|
tHIGH = 6; /* tHD;STA = tHIGH = 0.6 us */
|
|
tf = 3; /* tf = 0.3 us */
|
|
} else {
|
|
dev_err(pd->dev, "unrecognized bus speed %lu Hz\n",
|
|
pd->bus_speed);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pd->iccl = sh_mobile_i2c_iccl(i2c_clk_khz, tLOW, tf);
|
|
pd->icch = sh_mobile_i2c_icch(i2c_clk_khz, tHIGH, tf);
|
|
|
|
return sh_mobile_i2c_check_timing(pd);
|
|
}
|
|
|
|
static int sh_mobile_i2c_v2_init(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
unsigned long clks_per_cycle;
|
|
|
|
/* L = 5, H = 4, L + H = 9 */
|
|
clks_per_cycle = clk_get_rate(pd->clk) / pd->bus_speed;
|
|
pd->iccl = DIV_ROUND_UP(clks_per_cycle * 5 / 9 - 1, pd->clks_per_count);
|
|
pd->icch = DIV_ROUND_UP(clks_per_cycle * 4 / 9 - 5, pd->clks_per_count);
|
|
|
|
return sh_mobile_i2c_check_timing(pd);
|
|
}
|
|
|
|
static unsigned char i2c_op(struct sh_mobile_i2c_data *pd, enum sh_mobile_i2c_op op)
|
|
{
|
|
unsigned char ret = 0;
|
|
unsigned long flags;
|
|
|
|
dev_dbg(pd->dev, "op %d\n", op);
|
|
|
|
spin_lock_irqsave(&pd->lock, flags);
|
|
|
|
switch (op) {
|
|
case OP_START: /* issue start and trigger DTE interrupt */
|
|
iic_wr(pd, ICCR, ICCR_ICE | ICCR_TRS | ICCR_BBSY);
|
|
break;
|
|
case OP_TX_FIRST: /* disable DTE interrupt and write client address */
|
|
iic_wr(pd, ICIC, ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
|
|
iic_wr(pd, ICDR, i2c_8bit_addr_from_msg(pd->msg));
|
|
break;
|
|
case OP_TX: /* write data */
|
|
iic_wr(pd, ICDR, pd->msg->buf[pd->pos]);
|
|
break;
|
|
case OP_TX_STOP: /* issue a stop (or rep_start) */
|
|
iic_wr(pd, ICCR, pd->send_stop ? ICCR_ICE | ICCR_TRS
|
|
: ICCR_ICE | ICCR_TRS | ICCR_BBSY);
|
|
break;
|
|
case OP_TX_TO_RX: /* select read mode */
|
|
iic_wr(pd, ICCR, ICCR_ICE | ICCR_SCP);
|
|
break;
|
|
case OP_RX: /* just read data */
|
|
ret = iic_rd(pd, ICDR);
|
|
break;
|
|
case OP_RX_STOP: /* enable DTE interrupt, issue stop */
|
|
iic_wr(pd, ICIC,
|
|
ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
|
|
iic_wr(pd, ICCR, ICCR_ICE | ICCR_RACK);
|
|
break;
|
|
case OP_RX_STOP_DATA: /* enable DTE interrupt, read data, issue stop */
|
|
iic_wr(pd, ICIC,
|
|
ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
|
|
ret = iic_rd(pd, ICDR);
|
|
iic_wr(pd, ICCR, ICCR_ICE | ICCR_RACK);
|
|
break;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&pd->lock, flags);
|
|
|
|
dev_dbg(pd->dev, "op %d, data out 0x%02x\n", op, ret);
|
|
return ret;
|
|
}
|
|
|
|
static int sh_mobile_i2c_isr_tx(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
if (pd->pos == pd->msg->len) {
|
|
i2c_op(pd, OP_TX_STOP);
|
|
return 1;
|
|
}
|
|
|
|
if (pd->pos == -1)
|
|
i2c_op(pd, OP_TX_FIRST);
|
|
else
|
|
i2c_op(pd, OP_TX);
|
|
|
|
pd->pos++;
|
|
return 0;
|
|
}
|
|
|
|
static int sh_mobile_i2c_isr_rx(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
int real_pos;
|
|
|
|
/* switch from TX (address) to RX (data) adds two interrupts */
|
|
real_pos = pd->pos - 2;
|
|
|
|
if (pd->pos == -1) {
|
|
i2c_op(pd, OP_TX_FIRST);
|
|
} else if (pd->pos == 0) {
|
|
i2c_op(pd, OP_TX_TO_RX);
|
|
} else if (pd->pos == pd->msg->len) {
|
|
if (pd->stop_after_dma) {
|
|
/* Simulate PIO end condition after DMA transfer */
|
|
i2c_op(pd, OP_RX_STOP);
|
|
pd->pos++;
|
|
goto done;
|
|
}
|
|
|
|
if (real_pos < 0)
|
|
i2c_op(pd, OP_RX_STOP);
|
|
else
|
|
pd->msg->buf[real_pos] = i2c_op(pd, OP_RX_STOP_DATA);
|
|
} else if (real_pos >= 0) {
|
|
pd->msg->buf[real_pos] = i2c_op(pd, OP_RX);
|
|
}
|
|
|
|
done:
|
|
pd->pos++;
|
|
return pd->pos == (pd->msg->len + 2);
|
|
}
|
|
|
|
static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
|
|
{
|
|
struct sh_mobile_i2c_data *pd = dev_id;
|
|
unsigned char sr;
|
|
int wakeup = 0;
|
|
|
|
sr = iic_rd(pd, ICSR);
|
|
pd->sr |= sr; /* remember state */
|
|
|
|
dev_dbg(pd->dev, "i2c_isr 0x%02x 0x%02x %s %d %d!\n", sr, pd->sr,
|
|
(pd->msg->flags & I2C_M_RD) ? "read" : "write",
|
|
pd->pos, pd->msg->len);
|
|
|
|
/* Kick off TxDMA after preface was done */
|
|
if (pd->dma_direction == DMA_TO_DEVICE && pd->pos == 0)
|
|
iic_set_clr(pd, ICIC, ICIC_TDMAE, 0);
|
|
else if (sr & (ICSR_AL | ICSR_TACK))
|
|
/* don't interrupt transaction - continue to issue stop */
|
|
iic_wr(pd, ICSR, sr & ~(ICSR_AL | ICSR_TACK));
|
|
else if (pd->msg->flags & I2C_M_RD)
|
|
wakeup = sh_mobile_i2c_isr_rx(pd);
|
|
else
|
|
wakeup = sh_mobile_i2c_isr_tx(pd);
|
|
|
|
/* Kick off RxDMA after preface was done */
|
|
if (pd->dma_direction == DMA_FROM_DEVICE && pd->pos == 1)
|
|
iic_set_clr(pd, ICIC, ICIC_RDMAE, 0);
|
|
|
|
if (sr & ICSR_WAIT) /* TODO: add delay here to support slow acks */
|
|
iic_wr(pd, ICSR, sr & ~ICSR_WAIT);
|
|
|
|
if (wakeup) {
|
|
pd->sr |= SW_DONE;
|
|
wake_up(&pd->wait);
|
|
}
|
|
|
|
/* defeat write posting to avoid spurious WAIT interrupts */
|
|
iic_rd(pd, ICSR);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void sh_mobile_i2c_dma_unmap(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
struct dma_chan *chan = pd->dma_direction == DMA_FROM_DEVICE
|
|
? pd->dma_rx : pd->dma_tx;
|
|
|
|
dma_unmap_single(chan->device->dev, sg_dma_address(&pd->sg),
|
|
pd->msg->len, pd->dma_direction);
|
|
|
|
pd->dma_direction = DMA_NONE;
|
|
}
|
|
|
|
static void sh_mobile_i2c_cleanup_dma(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
if (pd->dma_direction == DMA_NONE)
|
|
return;
|
|
else if (pd->dma_direction == DMA_FROM_DEVICE)
|
|
dmaengine_terminate_all(pd->dma_rx);
|
|
else if (pd->dma_direction == DMA_TO_DEVICE)
|
|
dmaengine_terminate_all(pd->dma_tx);
|
|
|
|
sh_mobile_i2c_dma_unmap(pd);
|
|
}
|
|
|
|
static void sh_mobile_i2c_dma_callback(void *data)
|
|
{
|
|
struct sh_mobile_i2c_data *pd = data;
|
|
|
|
sh_mobile_i2c_dma_unmap(pd);
|
|
pd->pos = pd->msg->len;
|
|
pd->stop_after_dma = true;
|
|
|
|
iic_set_clr(pd, ICIC, 0, ICIC_TDMAE | ICIC_RDMAE);
|
|
}
|
|
|
|
static struct dma_chan *sh_mobile_i2c_request_dma_chan(struct device *dev,
|
|
enum dma_transfer_direction dir, dma_addr_t port_addr)
|
|
{
|
|
struct dma_chan *chan;
|
|
struct dma_slave_config cfg;
|
|
char *chan_name = dir == DMA_MEM_TO_DEV ? "tx" : "rx";
|
|
int ret;
|
|
|
|
chan = dma_request_chan(dev, chan_name);
|
|
if (IS_ERR(chan)) {
|
|
dev_dbg(dev, "request_channel failed for %s (%ld)\n", chan_name,
|
|
PTR_ERR(chan));
|
|
return chan;
|
|
}
|
|
|
|
memset(&cfg, 0, sizeof(cfg));
|
|
cfg.direction = dir;
|
|
if (dir == DMA_MEM_TO_DEV) {
|
|
cfg.dst_addr = port_addr;
|
|
cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
|
|
} else {
|
|
cfg.src_addr = port_addr;
|
|
cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
|
|
}
|
|
|
|
ret = dmaengine_slave_config(chan, &cfg);
|
|
if (ret) {
|
|
dev_dbg(dev, "slave_config failed for %s (%d)\n", chan_name, ret);
|
|
dma_release_channel(chan);
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
dev_dbg(dev, "got DMA channel for %s\n", chan_name);
|
|
return chan;
|
|
}
|
|
|
|
static void sh_mobile_i2c_xfer_dma(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
bool read = pd->msg->flags & I2C_M_RD;
|
|
enum dma_data_direction dir = read ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
|
|
struct dma_chan *chan = read ? pd->dma_rx : pd->dma_tx;
|
|
struct dma_async_tx_descriptor *txdesc;
|
|
dma_addr_t dma_addr;
|
|
dma_cookie_t cookie;
|
|
|
|
if (PTR_ERR(chan) == -EPROBE_DEFER) {
|
|
if (read)
|
|
chan = pd->dma_rx = sh_mobile_i2c_request_dma_chan(pd->dev, DMA_DEV_TO_MEM,
|
|
pd->res->start + ICDR);
|
|
else
|
|
chan = pd->dma_tx = sh_mobile_i2c_request_dma_chan(pd->dev, DMA_MEM_TO_DEV,
|
|
pd->res->start + ICDR);
|
|
}
|
|
|
|
if (IS_ERR(chan))
|
|
return;
|
|
|
|
dma_addr = dma_map_single(chan->device->dev, pd->dma_buf, pd->msg->len, dir);
|
|
if (dma_mapping_error(chan->device->dev, dma_addr)) {
|
|
dev_dbg(pd->dev, "dma map failed, using PIO\n");
|
|
return;
|
|
}
|
|
|
|
sg_dma_len(&pd->sg) = pd->msg->len;
|
|
sg_dma_address(&pd->sg) = dma_addr;
|
|
|
|
pd->dma_direction = dir;
|
|
|
|
txdesc = dmaengine_prep_slave_sg(chan, &pd->sg, 1,
|
|
read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV,
|
|
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
|
if (!txdesc) {
|
|
dev_dbg(pd->dev, "dma prep slave sg failed, using PIO\n");
|
|
sh_mobile_i2c_cleanup_dma(pd);
|
|
return;
|
|
}
|
|
|
|
txdesc->callback = sh_mobile_i2c_dma_callback;
|
|
txdesc->callback_param = pd;
|
|
|
|
cookie = dmaengine_submit(txdesc);
|
|
if (dma_submit_error(cookie)) {
|
|
dev_dbg(pd->dev, "submitting dma failed, using PIO\n");
|
|
sh_mobile_i2c_cleanup_dma(pd);
|
|
return;
|
|
}
|
|
|
|
dma_async_issue_pending(chan);
|
|
}
|
|
|
|
static void start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg,
|
|
bool do_init)
|
|
{
|
|
if (do_init) {
|
|
/* Initialize channel registers */
|
|
iic_wr(pd, ICCR, ICCR_SCP);
|
|
|
|
/* Enable channel and configure rx ack */
|
|
iic_wr(pd, ICCR, ICCR_ICE | ICCR_SCP);
|
|
|
|
/* Set the clock */
|
|
iic_wr(pd, ICCL, pd->iccl & 0xff);
|
|
iic_wr(pd, ICCH, pd->icch & 0xff);
|
|
}
|
|
|
|
pd->msg = usr_msg;
|
|
pd->pos = -1;
|
|
pd->sr = 0;
|
|
|
|
pd->dma_buf = i2c_get_dma_safe_msg_buf(pd->msg, 8);
|
|
if (pd->dma_buf)
|
|
sh_mobile_i2c_xfer_dma(pd);
|
|
|
|
/* Enable all interrupts to begin with */
|
|
iic_wr(pd, ICIC, ICIC_DTEE | ICIC_WAITE | ICIC_ALE | ICIC_TACKE);
|
|
}
|
|
|
|
static int poll_dte(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
int i;
|
|
|
|
for (i = 1000; i; i--) {
|
|
u_int8_t val = iic_rd(pd, ICSR);
|
|
|
|
if (val & ICSR_DTE)
|
|
break;
|
|
|
|
if (val & ICSR_TACK)
|
|
return -ENXIO;
|
|
|
|
udelay(10);
|
|
}
|
|
|
|
return i ? 0 : -ETIMEDOUT;
|
|
}
|
|
|
|
static int poll_busy(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
int i;
|
|
|
|
for (i = 1000; i; i--) {
|
|
u_int8_t val = iic_rd(pd, ICSR);
|
|
|
|
dev_dbg(pd->dev, "val 0x%02x pd->sr 0x%02x\n", val, pd->sr);
|
|
|
|
/* the interrupt handler may wake us up before the
|
|
* transfer is finished, so poll the hardware
|
|
* until we're done.
|
|
*/
|
|
if (!(val & ICSR_BUSY)) {
|
|
/* handle missing acknowledge and arbitration lost */
|
|
val |= pd->sr;
|
|
if (val & ICSR_TACK)
|
|
return -ENXIO;
|
|
if (val & ICSR_AL)
|
|
return -EAGAIN;
|
|
break;
|
|
}
|
|
|
|
udelay(10);
|
|
}
|
|
|
|
return i ? 0 : -ETIMEDOUT;
|
|
}
|
|
|
|
static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
|
|
struct i2c_msg *msgs,
|
|
int num)
|
|
{
|
|
struct sh_mobile_i2c_data *pd = i2c_get_adapdata(adapter);
|
|
struct i2c_msg *msg;
|
|
int err = 0;
|
|
int i;
|
|
long timeout;
|
|
|
|
/* Wake up device and enable clock */
|
|
pm_runtime_get_sync(pd->dev);
|
|
|
|
/* Process all messages */
|
|
for (i = 0; i < num; i++) {
|
|
bool do_start = pd->send_stop || !i;
|
|
msg = &msgs[i];
|
|
pd->send_stop = i == num - 1 || msg->flags & I2C_M_STOP;
|
|
pd->stop_after_dma = false;
|
|
|
|
start_ch(pd, msg, do_start);
|
|
|
|
if (do_start)
|
|
i2c_op(pd, OP_START);
|
|
|
|
/* The interrupt handler takes care of the rest... */
|
|
timeout = wait_event_timeout(pd->wait,
|
|
pd->sr & (ICSR_TACK | SW_DONE),
|
|
adapter->timeout);
|
|
|
|
/* 'stop_after_dma' tells if DMA transfer was complete */
|
|
i2c_put_dma_safe_msg_buf(pd->dma_buf, pd->msg, pd->stop_after_dma);
|
|
|
|
if (!timeout) {
|
|
dev_err(pd->dev, "Transfer request timed out\n");
|
|
if (pd->dma_direction != DMA_NONE)
|
|
sh_mobile_i2c_cleanup_dma(pd);
|
|
|
|
err = -ETIMEDOUT;
|
|
break;
|
|
}
|
|
|
|
if (pd->send_stop)
|
|
err = poll_busy(pd);
|
|
else
|
|
err = poll_dte(pd);
|
|
if (err < 0)
|
|
break;
|
|
}
|
|
|
|
/* Disable channel */
|
|
iic_wr(pd, ICCR, ICCR_SCP);
|
|
|
|
/* Disable clock and mark device as idle */
|
|
pm_runtime_put_sync(pd->dev);
|
|
|
|
return err ?: num;
|
|
}
|
|
|
|
static u32 sh_mobile_i2c_func(struct i2c_adapter *adapter)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING;
|
|
}
|
|
|
|
static const struct i2c_algorithm sh_mobile_i2c_algorithm = {
|
|
.functionality = sh_mobile_i2c_func,
|
|
.master_xfer = sh_mobile_i2c_xfer,
|
|
};
|
|
|
|
static const struct i2c_adapter_quirks sh_mobile_i2c_quirks = {
|
|
.flags = I2C_AQ_NO_ZERO_LEN_READ,
|
|
};
|
|
|
|
/*
|
|
* r8a7740 has an errata regarding I2C I/O pad reset needing this workaround.
|
|
*/
|
|
static int sh_mobile_i2c_r8a7740_workaround(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
iic_set_clr(pd, ICCR, ICCR_ICE, 0);
|
|
iic_rd(pd, ICCR); /* dummy read */
|
|
|
|
iic_set_clr(pd, ICSTART, ICSTART_ICSTART, 0);
|
|
iic_rd(pd, ICSTART); /* dummy read */
|
|
|
|
udelay(10);
|
|
|
|
iic_wr(pd, ICCR, ICCR_SCP);
|
|
iic_wr(pd, ICSTART, 0);
|
|
|
|
udelay(10);
|
|
|
|
iic_wr(pd, ICCR, ICCR_TRS);
|
|
udelay(10);
|
|
iic_wr(pd, ICCR, 0);
|
|
udelay(10);
|
|
iic_wr(pd, ICCR, ICCR_TRS);
|
|
udelay(10);
|
|
|
|
return sh_mobile_i2c_init(pd);
|
|
}
|
|
|
|
static const struct sh_mobile_dt_config default_dt_config = {
|
|
.clks_per_count = 1,
|
|
.setup = sh_mobile_i2c_init,
|
|
};
|
|
|
|
static const struct sh_mobile_dt_config fast_clock_dt_config = {
|
|
.clks_per_count = 2,
|
|
.setup = sh_mobile_i2c_init,
|
|
};
|
|
|
|
static const struct sh_mobile_dt_config v2_freq_calc_dt_config = {
|
|
.clks_per_count = 2,
|
|
.setup = sh_mobile_i2c_v2_init,
|
|
};
|
|
|
|
static const struct sh_mobile_dt_config r8a7740_dt_config = {
|
|
.clks_per_count = 1,
|
|
.setup = sh_mobile_i2c_r8a7740_workaround,
|
|
};
|
|
|
|
static const struct of_device_id sh_mobile_i2c_dt_ids[] = {
|
|
{ .compatible = "renesas,iic-r8a73a4", .data = &fast_clock_dt_config },
|
|
{ .compatible = "renesas,iic-r8a7740", .data = &r8a7740_dt_config },
|
|
{ .compatible = "renesas,iic-r8a774c0", .data = &fast_clock_dt_config },
|
|
{ .compatible = "renesas,iic-r8a7790", .data = &v2_freq_calc_dt_config },
|
|
{ .compatible = "renesas,iic-r8a7791", .data = &v2_freq_calc_dt_config },
|
|
{ .compatible = "renesas,iic-r8a7792", .data = &v2_freq_calc_dt_config },
|
|
{ .compatible = "renesas,iic-r8a7793", .data = &v2_freq_calc_dt_config },
|
|
{ .compatible = "renesas,iic-r8a7794", .data = &v2_freq_calc_dt_config },
|
|
{ .compatible = "renesas,iic-r8a7795", .data = &v2_freq_calc_dt_config },
|
|
{ .compatible = "renesas,iic-r8a77990", .data = &v2_freq_calc_dt_config },
|
|
{ .compatible = "renesas,iic-sh73a0", .data = &fast_clock_dt_config },
|
|
{ .compatible = "renesas,rcar-gen2-iic", .data = &v2_freq_calc_dt_config },
|
|
{ .compatible = "renesas,rcar-gen3-iic", .data = &v2_freq_calc_dt_config },
|
|
{ .compatible = "renesas,rmobile-iic", .data = &default_dt_config },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sh_mobile_i2c_dt_ids);
|
|
|
|
static void sh_mobile_i2c_release_dma(struct sh_mobile_i2c_data *pd)
|
|
{
|
|
if (!IS_ERR(pd->dma_tx)) {
|
|
dma_release_channel(pd->dma_tx);
|
|
pd->dma_tx = ERR_PTR(-EPROBE_DEFER);
|
|
}
|
|
|
|
if (!IS_ERR(pd->dma_rx)) {
|
|
dma_release_channel(pd->dma_rx);
|
|
pd->dma_rx = ERR_PTR(-EPROBE_DEFER);
|
|
}
|
|
}
|
|
|
|
static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, struct sh_mobile_i2c_data *pd)
|
|
{
|
|
struct resource *res;
|
|
resource_size_t n;
|
|
int k = 0, ret;
|
|
|
|
while ((res = platform_get_resource(dev, IORESOURCE_IRQ, k))) {
|
|
for (n = res->start; n <= res->end; n++) {
|
|
ret = devm_request_irq(&dev->dev, n, sh_mobile_i2c_isr,
|
|
0, dev_name(&dev->dev), pd);
|
|
if (ret) {
|
|
dev_err(&dev->dev, "cannot request IRQ %pa\n", &n);
|
|
return ret;
|
|
}
|
|
}
|
|
k++;
|
|
}
|
|
|
|
return k > 0 ? 0 : -ENOENT;
|
|
}
|
|
|
|
static int sh_mobile_i2c_probe(struct platform_device *dev)
|
|
{
|
|
struct sh_mobile_i2c_data *pd;
|
|
struct i2c_adapter *adap;
|
|
struct resource *res;
|
|
const struct sh_mobile_dt_config *config;
|
|
int ret;
|
|
u32 bus_speed;
|
|
|
|
pd = devm_kzalloc(&dev->dev, sizeof(struct sh_mobile_i2c_data), GFP_KERNEL);
|
|
if (!pd)
|
|
return -ENOMEM;
|
|
|
|
pd->clk = devm_clk_get(&dev->dev, NULL);
|
|
if (IS_ERR(pd->clk)) {
|
|
dev_err(&dev->dev, "cannot get clock\n");
|
|
return PTR_ERR(pd->clk);
|
|
}
|
|
|
|
ret = sh_mobile_i2c_hook_irqs(dev, pd);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pd->dev = &dev->dev;
|
|
platform_set_drvdata(dev, pd);
|
|
|
|
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
|
|
|
|
pd->res = res;
|
|
pd->reg = devm_ioremap_resource(&dev->dev, res);
|
|
if (IS_ERR(pd->reg))
|
|
return PTR_ERR(pd->reg);
|
|
|
|
ret = of_property_read_u32(dev->dev.of_node, "clock-frequency", &bus_speed);
|
|
pd->bus_speed = (ret || !bus_speed) ? I2C_MAX_STANDARD_MODE_FREQ : bus_speed;
|
|
pd->clks_per_count = 1;
|
|
|
|
/* Newer variants come with two new bits in ICIC */
|
|
if (resource_size(res) > 0x17)
|
|
pd->flags |= IIC_FLAG_HAS_ICIC67;
|
|
|
|
pm_runtime_enable(&dev->dev);
|
|
pm_runtime_get_sync(&dev->dev);
|
|
|
|
config = of_device_get_match_data(&dev->dev);
|
|
if (config) {
|
|
pd->clks_per_count = config->clks_per_count;
|
|
ret = config->setup(pd);
|
|
} else {
|
|
ret = sh_mobile_i2c_init(pd);
|
|
}
|
|
|
|
pm_runtime_put_sync(&dev->dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Init DMA */
|
|
sg_init_table(&pd->sg, 1);
|
|
pd->dma_direction = DMA_NONE;
|
|
pd->dma_rx = pd->dma_tx = ERR_PTR(-EPROBE_DEFER);
|
|
|
|
/* setup the private data */
|
|
adap = &pd->adap;
|
|
i2c_set_adapdata(adap, pd);
|
|
|
|
adap->owner = THIS_MODULE;
|
|
adap->algo = &sh_mobile_i2c_algorithm;
|
|
adap->quirks = &sh_mobile_i2c_quirks;
|
|
adap->dev.parent = &dev->dev;
|
|
adap->retries = 5;
|
|
adap->nr = dev->id;
|
|
adap->dev.of_node = dev->dev.of_node;
|
|
|
|
strlcpy(adap->name, dev->name, sizeof(adap->name));
|
|
|
|
spin_lock_init(&pd->lock);
|
|
init_waitqueue_head(&pd->wait);
|
|
|
|
ret = i2c_add_numbered_adapter(adap);
|
|
if (ret < 0) {
|
|
sh_mobile_i2c_release_dma(pd);
|
|
return ret;
|
|
}
|
|
|
|
dev_info(&dev->dev, "I2C adapter %d, bus speed %lu Hz\n", adap->nr, pd->bus_speed);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sh_mobile_i2c_remove(struct platform_device *dev)
|
|
{
|
|
struct sh_mobile_i2c_data *pd = platform_get_drvdata(dev);
|
|
|
|
i2c_del_adapter(&pd->adap);
|
|
sh_mobile_i2c_release_dma(pd);
|
|
pm_runtime_disable(&dev->dev);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sh_mobile_i2c_driver = {
|
|
.driver = {
|
|
.name = "i2c-sh_mobile",
|
|
.of_match_table = sh_mobile_i2c_dt_ids,
|
|
},
|
|
.probe = sh_mobile_i2c_probe,
|
|
.remove = sh_mobile_i2c_remove,
|
|
};
|
|
|
|
static int __init sh_mobile_i2c_adap_init(void)
|
|
{
|
|
return platform_driver_register(&sh_mobile_i2c_driver);
|
|
}
|
|
subsys_initcall(sh_mobile_i2c_adap_init);
|
|
|
|
static void __exit sh_mobile_i2c_adap_exit(void)
|
|
{
|
|
platform_driver_unregister(&sh_mobile_i2c_driver);
|
|
}
|
|
module_exit(sh_mobile_i2c_adap_exit);
|
|
|
|
MODULE_DESCRIPTION("SuperH Mobile I2C Bus Controller driver");
|
|
MODULE_AUTHOR("Magnus Damm");
|
|
MODULE_AUTHOR("Wolfram Sang");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:i2c-sh_mobile");
|