mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 04:34:11 +08:00
26ef5c0957
The ppc32 and ppc64 versions of cacheflush.h were almost identical. The two versions of cache.h are fairly similar, except for a bunch of register definitions in the ppc32 version which probably belong better elsewhere. This patch, therefore, merges both headers. Notable points: - there are several functions in cacheflush.h which exist only on ppc32 or only on ppc64. These are handled by #ifdef for now, but these should probably be consolidated, along with the actual code behind them later. - Confusingly, both ppc32 and ppc64 have a flush_dcache_range(), but they're subtly different: it uses dcbf on ppc32 and dcbst on ppc64, ppc64 has a flush_inval_dcache_range() which uses dcbf. These too should be merged and consolidated later. - Also flush_dcache_range() was defined in cacheflush.h on ppc64, and in cache.h on ppc32. In the merged version it's in cacheflush.h - On ppc32 flush_icache_range() is a normal function from misc.S. On ppc64, it was wrapper, testing a feature bit before calling __flush_icache_range() which does the actual flush. This patch takes the ppc64 approach, which amounts to no change on ppc32, since CPU_FTR_COHERENT_ICACHE will never be set there, but does mean renaming flush_icache_range() to __flush_icache_range() in arch/ppc/kernel/misc.S and arch/powerpc/kernel/misc_32.S - The PReP register info from asm-ppc/cache.h has moved to arch/ppc/platforms/prep_setup.c - The 8xx register info from asm-ppc/cache.h has moved to a new asm-powerpc/reg_8xx.h, included from reg.h - flush_dcache_all() was defined on ppc32 (only), but was never called (although it was exported). Thus this patch removes it from cacheflush.h and from ARCH=powerpc (misc_32.S) entirely. It's left in ARCH=ppc for now, with the prototype moved to ppc_ksyms.c. Built for Walnut (ARCH=ppc), 32-bit multiplatform (pmac, CHRP and PReP ARCH=ppc, pmac and CHRP ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built for 32-bit powermac (ARCH=ppc and ARCH=powerpc). Built and booted on POWER5 LPAR (ARCH=powerpc and ARCH=ppc64). Built and booted on G5 (ARCH=powerpc) Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
43 lines
1.6 KiB
C
43 lines
1.6 KiB
C
/*
|
|
* Contains register definitions common to PowerPC 8xx CPUs. Notice
|
|
*/
|
|
#ifndef _ASM_POWERPC_REG_8xx_H
|
|
#define _ASM_POWERPC_REG_8xx_H
|
|
|
|
/* Cache control on the MPC8xx is provided through some additional
|
|
* special purpose registers.
|
|
*/
|
|
#define SPRN_IC_CST 560 /* Instruction cache control/status */
|
|
#define SPRN_IC_ADR 561 /* Address needed for some commands */
|
|
#define SPRN_IC_DAT 562 /* Read-only data register */
|
|
#define SPRN_DC_CST 568 /* Data cache control/status */
|
|
#define SPRN_DC_ADR 569 /* Address needed for some commands */
|
|
#define SPRN_DC_DAT 570 /* Read-only data register */
|
|
|
|
/* Commands. Only the first few are available to the instruction cache.
|
|
*/
|
|
#define IDC_ENABLE 0x02000000 /* Cache enable */
|
|
#define IDC_DISABLE 0x04000000 /* Cache disable */
|
|
#define IDC_LDLCK 0x06000000 /* Load and lock */
|
|
#define IDC_UNLINE 0x08000000 /* Unlock line */
|
|
#define IDC_UNALL 0x0a000000 /* Unlock all */
|
|
#define IDC_INVALL 0x0c000000 /* Invalidate all */
|
|
|
|
#define DC_FLINE 0x0e000000 /* Flush data cache line */
|
|
#define DC_SFWT 0x01000000 /* Set forced writethrough mode */
|
|
#define DC_CFWT 0x03000000 /* Clear forced writethrough mode */
|
|
#define DC_SLES 0x05000000 /* Set little endian swap mode */
|
|
#define DC_CLES 0x07000000 /* Clear little endian swap mode */
|
|
|
|
/* Status.
|
|
*/
|
|
#define IDC_ENABLED 0x80000000 /* Cache is enabled */
|
|
#define IDC_CERR1 0x00200000 /* Cache error 1 */
|
|
#define IDC_CERR2 0x00100000 /* Cache error 2 */
|
|
#define IDC_CERR3 0x00080000 /* Cache error 3 */
|
|
|
|
#define DC_DFWT 0x40000000 /* Data cache is forced write through */
|
|
#define DC_LES 0x20000000 /* Caches are little endian mode */
|
|
|
|
#endif /* _ASM_POWERPC_REG_8xx_H */
|