mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-29 15:43:59 +08:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
287 lines
7.7 KiB
C
287 lines
7.7 KiB
C
/*
|
|
* sata_sis.c - Silicon Integrated Systems SATA
|
|
*
|
|
* Maintained by: Uwe Koziolek
|
|
* Please ALWAYS copy linux-ide@vger.kernel.org
|
|
* on emails.
|
|
*
|
|
* Copyright 2004 Uwe Koziolek
|
|
*
|
|
* The contents of this file are subject to the Open
|
|
* Software License version 1.1 that can be found at
|
|
* http://www.opensource.org/licenses/osl-1.1.txt and is included herein
|
|
* by reference.
|
|
*
|
|
* Alternatively, the contents of this file may be used under the terms
|
|
* of the GNU General Public License version 2 (the "GPL") as distributed
|
|
* in the kernel source COPYING file, in which case the provisions of
|
|
* the GPL are applicable instead of the above. If you wish to allow
|
|
* the use of your version of this file only under the terms of the
|
|
* GPL and not to allow others to use your version of this file under
|
|
* the OSL, indicate your decision by deleting the provisions above and
|
|
* replace them with the notice and other provisions required by the GPL.
|
|
* If you do not delete the provisions above, a recipient may use your
|
|
* version of this file under either the OSL or the GPL.
|
|
*
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include "scsi.h"
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "sata_sis"
|
|
#define DRV_VERSION "0.5"
|
|
|
|
enum {
|
|
sis_180 = 0,
|
|
SIS_SCR_PCI_BAR = 5,
|
|
|
|
/* PCI configuration registers */
|
|
SIS_GENCTL = 0x54, /* IDE General Control register */
|
|
SIS_SCR_BASE = 0xc0, /* sata0 phy SCR registers */
|
|
SIS_SATA1_OFS = 0x10, /* offset from sata0->sata1 phy regs */
|
|
|
|
/* random bits */
|
|
SIS_FLAG_CFGSCR = (1 << 30), /* host flag: SCRs via PCI cfg */
|
|
|
|
GENCTL_IOMAPPED_SCR = (1 << 26), /* if set, SCRs are in IO space */
|
|
};
|
|
|
|
static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
|
|
static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg);
|
|
static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
|
|
|
|
static struct pci_device_id sis_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_SI, 0x180, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 },
|
|
{ PCI_VENDOR_ID_SI, 0x181, PCI_ANY_ID, PCI_ANY_ID, 0, 0, sis_180 },
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
|
|
static struct pci_driver sis_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = sis_pci_tbl,
|
|
.probe = sis_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
};
|
|
|
|
static Scsi_Host_Template sis_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.eh_strategy_handler = ata_scsi_error,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = ATA_MAX_PRD,
|
|
.max_sectors = ATA_MAX_SECTORS,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.bios_param = ata_std_bios_param,
|
|
.ordered_flush = 1,
|
|
};
|
|
|
|
static struct ata_port_operations sis_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
.phy_reset = sata_phy_reset,
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
.bmdma_start = ata_bmdma_start,
|
|
.bmdma_stop = ata_bmdma_stop,
|
|
.bmdma_status = ata_bmdma_status,
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
.eng_timeout = ata_eng_timeout,
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.scr_read = sis_scr_read,
|
|
.scr_write = sis_scr_write,
|
|
.port_start = ata_port_start,
|
|
.port_stop = ata_port_stop,
|
|
};
|
|
|
|
static struct ata_port_info sis_port_info = {
|
|
.sht = &sis_sht,
|
|
.host_flags = ATA_FLAG_SATA | ATA_FLAG_SATA_RESET |
|
|
ATA_FLAG_NO_LEGACY,
|
|
.pio_mask = 0x1f,
|
|
.mwdma_mask = 0x7,
|
|
.udma_mask = 0x7f,
|
|
.port_ops = &sis_ops,
|
|
};
|
|
|
|
|
|
MODULE_AUTHOR("Uwe Koziolek");
|
|
MODULE_DESCRIPTION("low-level driver for Silicon Integratad Systems SATA controller");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, sis_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
static unsigned int get_scr_cfg_addr(unsigned int port_no, unsigned int sc_reg)
|
|
{
|
|
unsigned int addr = SIS_SCR_BASE + (4 * sc_reg);
|
|
|
|
if (port_no)
|
|
addr += SIS_SATA1_OFS;
|
|
return addr;
|
|
}
|
|
|
|
static u32 sis_scr_cfg_read (struct ata_port *ap, unsigned int sc_reg)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
|
|
unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, sc_reg);
|
|
u32 val;
|
|
|
|
if (sc_reg == SCR_ERROR) /* doesn't exist in PCI cfg space */
|
|
return 0xffffffff;
|
|
pci_read_config_dword(pdev, cfg_addr, &val);
|
|
return val;
|
|
}
|
|
|
|
static void sis_scr_cfg_write (struct ata_port *ap, unsigned int scr, u32 val)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
|
|
unsigned int cfg_addr = get_scr_cfg_addr(ap->port_no, scr);
|
|
|
|
if (scr == SCR_ERROR) /* doesn't exist in PCI cfg space */
|
|
return;
|
|
pci_write_config_dword(pdev, cfg_addr, val);
|
|
}
|
|
|
|
static u32 sis_scr_read (struct ata_port *ap, unsigned int sc_reg)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return 0xffffffffU;
|
|
|
|
if (ap->flags & SIS_FLAG_CFGSCR)
|
|
return sis_scr_cfg_read(ap, sc_reg);
|
|
return inl(ap->ioaddr.scr_addr + (sc_reg * 4));
|
|
}
|
|
|
|
static void sis_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return;
|
|
|
|
if (ap->flags & SIS_FLAG_CFGSCR)
|
|
sis_scr_cfg_write(ap, sc_reg, val);
|
|
else
|
|
outl(val, ap->ioaddr.scr_addr + (sc_reg * 4));
|
|
}
|
|
|
|
/* move to PCI layer, integrate w/ MSI stuff */
|
|
static void pci_enable_intx(struct pci_dev *pdev)
|
|
{
|
|
u16 pci_command;
|
|
|
|
pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
|
|
if (pci_command & PCI_COMMAND_INTX_DISABLE) {
|
|
pci_command &= ~PCI_COMMAND_INTX_DISABLE;
|
|
pci_write_config_word(pdev, PCI_COMMAND, pci_command);
|
|
}
|
|
}
|
|
|
|
static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
struct ata_probe_ent *probe_ent = NULL;
|
|
int rc;
|
|
u32 genctl;
|
|
struct ata_port_info *ppi;
|
|
int pci_dev_busy = 0;
|
|
|
|
rc = pci_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = pci_request_regions(pdev, DRV_NAME);
|
|
if (rc) {
|
|
pci_dev_busy = 1;
|
|
goto err_out;
|
|
}
|
|
|
|
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
goto err_out_regions;
|
|
rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
goto err_out_regions;
|
|
|
|
ppi = &sis_port_info;
|
|
probe_ent = ata_pci_init_native_mode(pdev, &ppi);
|
|
if (!probe_ent) {
|
|
rc = -ENOMEM;
|
|
goto err_out_regions;
|
|
}
|
|
|
|
/* check and see if the SCRs are in IO space or PCI cfg space */
|
|
pci_read_config_dword(pdev, SIS_GENCTL, &genctl);
|
|
if ((genctl & GENCTL_IOMAPPED_SCR) == 0)
|
|
probe_ent->host_flags |= SIS_FLAG_CFGSCR;
|
|
|
|
/* if hardware thinks SCRs are in IO space, but there are
|
|
* no IO resources assigned, change to PCI cfg space.
|
|
*/
|
|
if ((!(probe_ent->host_flags & SIS_FLAG_CFGSCR)) &&
|
|
((pci_resource_start(pdev, SIS_SCR_PCI_BAR) == 0) ||
|
|
(pci_resource_len(pdev, SIS_SCR_PCI_BAR) < 128))) {
|
|
genctl &= ~GENCTL_IOMAPPED_SCR;
|
|
pci_write_config_dword(pdev, SIS_GENCTL, genctl);
|
|
probe_ent->host_flags |= SIS_FLAG_CFGSCR;
|
|
}
|
|
|
|
if (!(probe_ent->host_flags & SIS_FLAG_CFGSCR)) {
|
|
probe_ent->port[0].scr_addr =
|
|
pci_resource_start(pdev, SIS_SCR_PCI_BAR);
|
|
probe_ent->port[1].scr_addr =
|
|
pci_resource_start(pdev, SIS_SCR_PCI_BAR) + 64;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
pci_enable_intx(pdev);
|
|
|
|
/* FIXME: check ata_device_add return value */
|
|
ata_device_add(probe_ent);
|
|
kfree(probe_ent);
|
|
|
|
return 0;
|
|
|
|
err_out_regions:
|
|
pci_release_regions(pdev);
|
|
|
|
err_out:
|
|
if (!pci_dev_busy)
|
|
pci_disable_device(pdev);
|
|
return rc;
|
|
|
|
}
|
|
|
|
static int __init sis_init(void)
|
|
{
|
|
return pci_module_init(&sis_pci_driver);
|
|
}
|
|
|
|
static void __exit sis_exit(void)
|
|
{
|
|
pci_unregister_driver(&sis_pci_driver);
|
|
}
|
|
|
|
module_init(sis_init);
|
|
module_exit(sis_exit);
|
|
|