renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-18 18:23:53 +08:00
Code
d882b17251
linux-next/arch/s390/kernel/entry64.S
Heiko Carstens d882b17251 [PATCH] s390: put sys_call_table into .rodata section and write protect it 
Put s390's syscall tables into .rodata section and write protect this
section to prevent misuse of it.  Suggested by Arjan van de Ven
<arjan@infradead.org>.

Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:56:04 -07:00

1007 lines
31 KiB
ArmAsm
Raw Blame History

/*
* arch/s390/kernel/entry64.S
* S390 low-level entry points.
*
* Copyright (C) IBM Corp. 1999,2006
* Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
* Hartmut Penner (hp@de.ibm.com),
* Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
* Heiko Carstens <heiko.carstens@de.ibm.com>
*/
#include <linux/sys.h>
#include <linux/linkage.h>
#include <asm/cache.h>
#include <asm/lowcore.h>
#include <asm/errno.h>
#include <asm/ptrace.h>
#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
#include <asm/unistd.h>
#include <asm/page.h>
/*
* Stack layout for the system_call stack entry.
* The first few entries are identical to the user_regs_struct.
*/
SP_PTREGS = STACK_FRAME_OVERHEAD
SP_ARGS = STACK_FRAME_OVERHEAD + __PT_ARGS
SP_PSW = STACK_FRAME_OVERHEAD + __PT_PSW
SP_R0 = STACK_FRAME_OVERHEAD + __PT_GPRS
SP_R1 = STACK_FRAME_OVERHEAD + __PT_GPRS + 8
SP_R2 = STACK_FRAME_OVERHEAD + __PT_GPRS + 16
SP_R3 = STACK_FRAME_OVERHEAD + __PT_GPRS + 24
SP_R4 = STACK_FRAME_OVERHEAD + __PT_GPRS + 32
SP_R5 = STACK_FRAME_OVERHEAD + __PT_GPRS + 40
SP_R6 = STACK_FRAME_OVERHEAD + __PT_GPRS + 48
SP_R7 = STACK_FRAME_OVERHEAD + __PT_GPRS + 56
SP_R8 = STACK_FRAME_OVERHEAD + __PT_GPRS + 64
SP_R9 = STACK_FRAME_OVERHEAD + __PT_GPRS + 72
SP_R10 = STACK_FRAME_OVERHEAD + __PT_GPRS + 80
SP_R11 = STACK_FRAME_OVERHEAD + __PT_GPRS + 88
SP_R12 = STACK_FRAME_OVERHEAD + __PT_GPRS + 96
SP_R13 = STACK_FRAME_OVERHEAD + __PT_GPRS + 104
SP_R14 = STACK_FRAME_OVERHEAD + __PT_GPRS + 112
SP_R15 = STACK_FRAME_OVERHEAD + __PT_GPRS + 120
SP_ORIG_R2 = STACK_FRAME_OVERHEAD + __PT_ORIG_GPR2
SP_ILC = STACK_FRAME_OVERHEAD + __PT_ILC
SP_TRAP = STACK_FRAME_OVERHEAD + __PT_TRAP
SP_SIZE = STACK_FRAME_OVERHEAD + __PT_SIZE
STACK_SHIFT = PAGE_SHIFT + THREAD_ORDER
STACK_SIZE = 1 << STACK_SHIFT
_TIF_WORK_SVC = (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NEED_RESCHED | \
_TIF_MCCK_PENDING | _TIF_RESTART_SVC | _TIF_SINGLE_STEP )
_TIF_WORK_INT = (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | _TIF_NEED_RESCHED | \
_TIF_MCCK_PENDING)
#define BASED(name) name-system_call(%r13)
.macro STORE_TIMER lc_offset
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
stpt \lc_offset
#endif
.endm
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
.macro UPDATE_VTIME lc_from,lc_to,lc_sum
lg %r10,\lc_from
slg %r10,\lc_to
alg %r10,\lc_sum
stg %r10,\lc_sum
.endm
#endif
/*
* Register usage in interrupt handlers:
* R9 - pointer to current task structure
* R13 - pointer to literal pool
* R14 - return register for function calls
* R15 - kernel stack pointer
*/
.macro SAVE_ALL_BASE savearea
stmg %r12,%r15,\savearea
larl %r13,system_call
.endm
.macro SAVE_ALL_SYNC psworg,savearea
la %r12,\psworg
tm \psworg+1,0x01 # test problem state bit
jz 2f # skip stack setup save
lg %r15,__LC_KERNEL_STACK # problem state -> load ksp
#ifdef CONFIG_CHECK_STACK
j 3f
2: tml %r15,STACK_SIZE - CONFIG_STACK_GUARD
jz stack_overflow
3:
#endif
2:
.endm
.macro SAVE_ALL_ASYNC psworg,savearea
la %r12,\psworg
tm \psworg+1,0x01 # test problem state bit
jnz 1f # from user -> load kernel stack
clc \psworg+8(8),BASED(.Lcritical_end)
jhe 0f
clc \psworg+8(8),BASED(.Lcritical_start)
jl 0f
brasl %r14,cleanup_critical
tm 1(%r12),0x01 # retest problem state after cleanup
jnz 1f
0: lg %r14,__LC_ASYNC_STACK # are we already on the async. stack ?
slgr %r14,%r15
srag %r14,%r14,STACK_SHIFT
jz 2f
1: lg %r15,__LC_ASYNC_STACK # load async stack
#ifdef CONFIG_CHECK_STACK
j 3f
2: tml %r15,STACK_SIZE - CONFIG_STACK_GUARD
jz stack_overflow
3:
#endif
2:
.endm
.macro CREATE_STACK_FRAME psworg,savearea
aghi %r15,-SP_SIZE # make room for registers & psw
mvc SP_PSW(16,%r15),0(%r12) # move user PSW to stack
la %r12,\psworg
stg %r2,SP_ORIG_R2(%r15) # store original content of gpr 2
icm %r12,12,__LC_SVC_ILC
stmg %r0,%r11,SP_R0(%r15) # store gprs %r0-%r11 to kernel stack
st %r12,SP_ILC(%r15)
mvc SP_R12(32,%r15),\savearea # move %r12-%r15 to stack
la %r12,0
stg %r12,__SF_BACKCHAIN(%r15)
.endm
.macro RESTORE_ALL psworg,sync
mvc \psworg(16),SP_PSW(%r15) # move user PSW to lowcore
.if !\sync
ni \psworg+1,0xfd # clear wait state bit
.endif
lmg %r0,%r15,SP_R0(%r15) # load gprs 0-15 of user
STORE_TIMER __LC_EXIT_TIMER
lpswe \psworg # back to caller
.endm
/*
* Scheduler resume function, called by switch_to
* gpr2 = (task_struct *) prev
* gpr3 = (task_struct *) next
* Returns:
* gpr2 = prev
*/
.globl __switch_to
__switch_to:
tm __THREAD_per+4(%r3),0xe8 # is the new process using per ?
jz __switch_to_noper # if not we're fine
stctg %c9,%c11,__SF_EMPTY(%r15)# We are using per stuff
clc __THREAD_per(24,%r3),__SF_EMPTY(%r15)
je __switch_to_noper # we got away without bashing TLB's
lctlg %c9,%c11,__THREAD_per(%r3) # Nope we didn't
__switch_to_noper:
lg %r4,__THREAD_info(%r2) # get thread_info of prev
tm __TI_flags+7(%r4),_TIF_MCCK_PENDING # machine check pending?
jz __switch_to_no_mcck
ni __TI_flags+7(%r4),255-_TIF_MCCK_PENDING # clear flag in prev
lg %r4,__THREAD_info(%r3) # get thread_info of next
oi __TI_flags+7(%r4),_TIF_MCCK_PENDING # set it in next
__switch_to_no_mcck:
stmg %r6,%r15,__SF_GPRS(%r15)# store __switch_to registers of prev task
stg %r15,__THREAD_ksp(%r2) # store kernel stack to prev->tss.ksp
lg %r15,__THREAD_ksp(%r3) # load kernel stack from next->tss.ksp
lmg %r6,%r15,__SF_GPRS(%r15)# load __switch_to registers of next task
stg %r3,__LC_CURRENT # __LC_CURRENT = current task struct
lctl %c4,%c4,__TASK_pid(%r3) # load pid to control reg. 4
lg %r3,__THREAD_info(%r3) # load thread_info from task struct
stg %r3,__LC_THREAD_INFO
aghi %r3,STACK_SIZE
stg %r3,__LC_KERNEL_STACK # __LC_KERNEL_STACK = new kernel stack
br %r14
__critical_start:
/*
* SVC interrupt handler routine. System calls are synchronous events and
* are executed with interrupts enabled.
*/
.globl system_call
system_call:
STORE_TIMER __LC_SYNC_ENTER_TIMER
sysc_saveall:
SAVE_ALL_BASE __LC_SAVE_AREA
SAVE_ALL_SYNC __LC_SVC_OLD_PSW,__LC_SAVE_AREA
CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA
llgh %r7,__LC_SVC_INT_CODE # get svc number from lowcore
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
sysc_vtime:
tm SP_PSW+1(%r15),0x01 # interrupting from user ?
jz sysc_do_svc
UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
sysc_stime:
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
sysc_update:
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
#endif
sysc_do_svc:
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
slag %r7,%r7,2 # *4 and test for svc 0
jnz sysc_nr_ok
# svc 0: system call number in %r1
cl %r1,BASED(.Lnr_syscalls)
jnl sysc_nr_ok
lgfr %r7,%r1 # clear high word in r1
slag %r7,%r7,2 # svc 0: system call number in %r1
sysc_nr_ok:
mvc SP_ARGS(8,%r15),SP_R7(%r15)
sysc_do_restart:
larl %r10,sys_call_table
#ifdef CONFIG_COMPAT
tm __TI_flags+5(%r9),(_TIF_31BIT>>16) # running in 31 bit mode ?
jno sysc_noemu
larl %r10,sys_call_table_emu # use 31 bit emulation system calls
sysc_noemu:
#endif
tm __TI_flags+7(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
lgf %r8,0(%r7,%r10) # load address of system call routine
jnz sysc_tracesys
basr %r14,%r8 # call sys_xxxx
stg %r2,SP_R2(%r15) # store return value (change R2 on stack)
# ATTENTION: check sys_execve_glue before
# changing anything here !!
sysc_return:
tm SP_PSW+1(%r15),0x01 # returning to user ?
jno sysc_leave
tm __TI_flags+7(%r9),_TIF_WORK_SVC
jnz sysc_work # there is work to do (signals etc.)
sysc_leave:
RESTORE_ALL __LC_RETURN_PSW,1
#
# recheck if there is more work to do
#
sysc_work_loop:
tm __TI_flags+7(%r9),_TIF_WORK_SVC
jz sysc_leave # there is no work to do
#
# One of the work bits is on. Find out which one.
#
sysc_work:
tm __TI_flags+7(%r9),_TIF_MCCK_PENDING
jo sysc_mcck_pending
tm __TI_flags+7(%r9),_TIF_NEED_RESCHED
jo sysc_reschedule
tm __TI_flags+7(%r9),(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)
jnz sysc_sigpending
tm __TI_flags+7(%r9),_TIF_RESTART_SVC
jo sysc_restart
tm __TI_flags+7(%r9),_TIF_SINGLE_STEP
jo sysc_singlestep
j sysc_leave
#
# _TIF_NEED_RESCHED is set, call schedule
#
sysc_reschedule:
larl %r14,sysc_work_loop
jg schedule # return point is sysc_return
#
# _TIF_MCCK_PENDING is set, call handler
#
sysc_mcck_pending:
larl %r14,sysc_work_loop
jg s390_handle_mcck # TIF bit will be cleared by handler
#
# _TIF_SIGPENDING or _TIF_RESTORE_SIGMASK is set, call do_signal
#
sysc_sigpending:
ni __TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
la %r2,SP_PTREGS(%r15) # load pt_regs
brasl %r14,do_signal # call do_signal
tm __TI_flags+7(%r9),_TIF_RESTART_SVC
jo sysc_restart
tm __TI_flags+7(%r9),_TIF_SINGLE_STEP
jo sysc_singlestep
j sysc_work_loop
#
# _TIF_RESTART_SVC is set, set up registers and restart svc
#
sysc_restart:
ni __TI_flags+7(%r9),255-_TIF_RESTART_SVC # clear TIF_RESTART_SVC
lg %r7,SP_R2(%r15) # load new svc number
slag %r7,%r7,2 # *4
mvc SP_R2(8,%r15),SP_ORIG_R2(%r15) # restore first argument
lmg %r2,%r6,SP_R2(%r15) # load svc arguments
j sysc_do_restart # restart svc
#
# _TIF_SINGLE_STEP is set, call do_single_step
#
sysc_singlestep:
ni __TI_flags+7(%r9),255-_TIF_SINGLE_STEP # clear TIF_SINGLE_STEP
lhi %r0,__LC_PGM_OLD_PSW
sth %r0,SP_TRAP(%r15) # set trap indication to pgm check
la %r2,SP_PTREGS(%r15) # address of register-save area
larl %r14,sysc_return # load adr. of system return
jg do_single_step # branch to do_sigtrap
#
# call syscall_trace before and after system call
# special linkage: %r12 contains the return address for trace_svc
#
sysc_tracesys:
la %r2,SP_PTREGS(%r15) # load pt_regs
la %r3,0
srl %r7,2
stg %r7,SP_R2(%r15)
brasl %r14,syscall_trace
lghi %r0,NR_syscalls
clg %r0,SP_R2(%r15)
jnh sysc_tracenogo
lg %r7,SP_R2(%r15) # strace might have changed the
sll %r7,2 # system call
lgf %r8,0(%r7,%r10)
sysc_tracego:
lmg %r3,%r6,SP_R3(%r15)
lg %r2,SP_ORIG_R2(%r15)
basr %r14,%r8 # call sys_xxx
stg %r2,SP_R2(%r15) # store return value
sysc_tracenogo:
tm __TI_flags+7(%r9),(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
jz sysc_return
la %r2,SP_PTREGS(%r15) # load pt_regs
la %r3,1
larl %r14,sysc_return # return point is sysc_return
jg syscall_trace
#
# a new process exits the kernel with ret_from_fork
#
.globl ret_from_fork
ret_from_fork:
lg %r13,__LC_SVC_NEW_PSW+8
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
tm SP_PSW+1(%r15),0x01 # forking a kernel thread ?
jo 0f
stg %r15,SP_R15(%r15) # store stack pointer for new kthread
0: brasl %r14,schedule_tail
stosm 24(%r15),0x03 # reenable interrupts
j sysc_return
#
# clone, fork, vfork, exec and sigreturn need glue,
# because they all expect pt_regs as parameter,
# but are called with different parameter.
# return-address is set up above
#
sys_clone_glue:
la %r2,SP_PTREGS(%r15) # load pt_regs
jg sys_clone # branch to sys_clone
#ifdef CONFIG_COMPAT
sys32_clone_glue:
la %r2,SP_PTREGS(%r15) # load pt_regs
jg sys32_clone # branch to sys32_clone
#endif
sys_fork_glue:
la %r2,SP_PTREGS(%r15) # load pt_regs
jg sys_fork # branch to sys_fork
sys_vfork_glue:
la %r2,SP_PTREGS(%r15) # load pt_regs
jg sys_vfork # branch to sys_vfork
sys_execve_glue:
la %r2,SP_PTREGS(%r15) # load pt_regs
lgr %r12,%r14 # save return address
brasl %r14,sys_execve # call sys_execve
ltgr %r2,%r2 # check if execve failed
bnz 0(%r12) # it did fail -> store result in gpr2
b 6(%r12) # SKIP STG 2,SP_R2(15) in
# system_call/sysc_tracesys
#ifdef CONFIG_COMPAT
sys32_execve_glue:
la %r2,SP_PTREGS(%r15) # load pt_regs
lgr %r12,%r14 # save return address
brasl %r14,sys32_execve # call sys32_execve
ltgr %r2,%r2 # check if execve failed
bnz 0(%r12) # it did fail -> store result in gpr2
b 6(%r12) # SKIP STG 2,SP_R2(15) in
# system_call/sysc_tracesys
#endif
sys_sigreturn_glue:
la %r2,SP_PTREGS(%r15) # load pt_regs as parameter
jg sys_sigreturn # branch to sys_sigreturn
#ifdef CONFIG_COMPAT
sys32_sigreturn_glue:
la %r2,SP_PTREGS(%r15) # load pt_regs as parameter
jg sys32_sigreturn # branch to sys32_sigreturn
#endif
sys_rt_sigreturn_glue:
la %r2,SP_PTREGS(%r15) # load pt_regs as parameter
jg sys_rt_sigreturn # branch to sys_sigreturn
#ifdef CONFIG_COMPAT
sys32_rt_sigreturn_glue:
la %r2,SP_PTREGS(%r15) # load pt_regs as parameter
jg sys32_rt_sigreturn # branch to sys32_sigreturn
#endif
sys_sigaltstack_glue:
la %r4,SP_PTREGS(%r15) # load pt_regs as parameter
jg sys_sigaltstack # branch to sys_sigreturn
#ifdef CONFIG_COMPAT
sys32_sigaltstack_glue:
la %r4,SP_PTREGS(%r15) # load pt_regs as parameter
jg sys32_sigaltstack_wrapper # branch to sys_sigreturn
#endif
/*
* Program check handler routine
*/
.globl pgm_check_handler
pgm_check_handler:
/*
* First we need to check for a special case:
* Single stepping an instruction that disables the PER event mask will
* cause a PER event AFTER the mask has been set. Example: SVC or LPSW.
* For a single stepped SVC the program check handler gets control after
* the SVC new PSW has been loaded. But we want to execute the SVC first and
* then handle the PER event. Therefore we update the SVC old PSW to point
* to the pgm_check_handler and branch to the SVC handler after we checked
* if we have to load the kernel stack register.
* For every other possible cause for PER event without the PER mask set
* we just ignore the PER event (FIXME: is there anything we have to do
* for LPSW?).
*/
STORE_TIMER __LC_SYNC_ENTER_TIMER
SAVE_ALL_BASE __LC_SAVE_AREA
tm __LC_PGM_INT_CODE+1,0x80 # check whether we got a per exception
jnz pgm_per # got per exception -> special case
SAVE_ALL_SYNC __LC_PGM_OLD_PSW,__LC_SAVE_AREA
CREATE_STACK_FRAME __LC_PGM_OLD_PSW,__LC_SAVE_AREA
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
tm SP_PSW+1(%r15),0x01 # interrupting from user ?
jz pgm_no_vtime
UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
pgm_no_vtime:
#endif
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
lgf %r3,__LC_PGM_ILC # load program interruption code
lghi %r8,0x7f
ngr %r8,%r3
pgm_do_call:
sll %r8,3
larl %r1,pgm_check_table
lg %r1,0(%r8,%r1) # load address of handler routine
la %r2,SP_PTREGS(%r15) # address of register-save area
larl %r14,sysc_return
br %r1 # branch to interrupt-handler
#
# handle per exception
#
pgm_per:
tm __LC_PGM_OLD_PSW,0x40 # test if per event recording is on
jnz pgm_per_std # ok, normal per event from user space
# ok its one of the special cases, now we need to find out which one
clc __LC_PGM_OLD_PSW(16),__LC_SVC_NEW_PSW
je pgm_svcper
# no interesting special case, ignore PER event
lmg %r12,%r15,__LC_SAVE_AREA
lpswe __LC_PGM_OLD_PSW
#
# Normal per exception
#
pgm_per_std:
SAVE_ALL_SYNC __LC_PGM_OLD_PSW,__LC_SAVE_AREA
CREATE_STACK_FRAME __LC_PGM_OLD_PSW,__LC_SAVE_AREA
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
tm SP_PSW+1(%r15),0x01 # interrupting from user ?
jz pgm_no_vtime2
UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
pgm_no_vtime2:
#endif
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
lg %r1,__TI_task(%r9)
mvc __THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID
mvc __THREAD_per+__PER_address(8,%r1),__LC_PER_ADDRESS
mvc __THREAD_per+__PER_access_id(1,%r1),__LC_PER_ACCESS_ID
oi __TI_flags+7(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
lgf %r3,__LC_PGM_ILC # load program interruption code
lghi %r8,0x7f
ngr %r8,%r3 # clear per-event-bit and ilc
je sysc_return
j pgm_do_call
#
# it was a single stepped SVC that is causing all the trouble
#
pgm_svcper:
SAVE_ALL_SYNC __LC_SVC_OLD_PSW,__LC_SAVE_AREA
CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
tm SP_PSW+1(%r15),0x01 # interrupting from user ?
jz pgm_no_vtime3
UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
pgm_no_vtime3:
#endif
llgh %r7,__LC_SVC_INT_CODE # get svc number from lowcore
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
lg %r1,__TI_task(%r9)
mvc __THREAD_per+__PER_atmid(2,%r1),__LC_PER_ATMID
mvc __THREAD_per+__PER_address(8,%r1),__LC_PER_ADDRESS
mvc __THREAD_per+__PER_access_id(1,%r1),__LC_PER_ACCESS_ID
oi __TI_flags+7(%r9),_TIF_SINGLE_STEP # set TIF_SINGLE_STEP
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
j sysc_do_svc
/*
* IO interrupt handler routine
*/
.globl io_int_handler
io_int_handler:
STORE_TIMER __LC_ASYNC_ENTER_TIMER
stck __LC_INT_CLOCK
SAVE_ALL_BASE __LC_SAVE_AREA+32
SAVE_ALL_ASYNC __LC_IO_OLD_PSW,__LC_SAVE_AREA+32
CREATE_STACK_FRAME __LC_IO_OLD_PSW,__LC_SAVE_AREA+32
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
tm SP_PSW+1(%r15),0x01 # interrupting from user ?
jz io_no_vtime
UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
mvc __LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER
io_no_vtime:
#endif
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
la %r2,SP_PTREGS(%r15) # address of register-save area
brasl %r14,do_IRQ # call standard irq handler
io_return:
tm SP_PSW+1(%r15),0x01 # returning to user ?
#ifdef CONFIG_PREEMPT
jno io_preempt # no -> check for preemptive scheduling
#else
jno io_leave # no-> skip resched & signal
#endif
tm __TI_flags+7(%r9),_TIF_WORK_INT
jnz io_work # there is work to do (signals etc.)
io_leave:
RESTORE_ALL __LC_RETURN_PSW,0
io_done:
#ifdef CONFIG_PREEMPT
io_preempt:
icm %r0,15,__TI_precount(%r9)
jnz io_leave
# switch to kernel stack
lg %r1,SP_R15(%r15)
aghi %r1,-SP_SIZE
mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15)
xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) # clear back chain
lgr %r15,%r1
io_resume_loop:
tm __TI_flags+7(%r9),_TIF_NEED_RESCHED
jno io_leave
larl %r1,.Lc_pactive
mvc __TI_precount(4,%r9),0(%r1)
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
brasl %r14,schedule # call schedule
stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts
xc __TI_precount(4,%r9),__TI_precount(%r9)
j io_resume_loop
#endif
#
# switch to kernel stack, then check TIF bits
#
io_work:
lg %r1,__LC_KERNEL_STACK
aghi %r1,-SP_SIZE
mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15)
xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) # clear back chain
lgr %r15,%r1
#
# One of the work bits is on. Find out which one.
# Checked are: _TIF_SIGPENDING, _TIF_RESTORE_SIGPENDING, _TIF_NEED_RESCHED
# and _TIF_MCCK_PENDING
#
io_work_loop:
tm __TI_flags+7(%r9),_TIF_MCCK_PENDING
jo io_mcck_pending
tm __TI_flags+7(%r9),_TIF_NEED_RESCHED
jo io_reschedule
tm __TI_flags+7(%r9),(_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK)
jnz io_sigpending
j io_leave
#
# _TIF_MCCK_PENDING is set, call handler
#
io_mcck_pending:
larl %r14,io_work_loop
jg s390_handle_mcck # TIF bit will be cleared by handler
#
# _TIF_NEED_RESCHED is set, call schedule
#
io_reschedule:
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
brasl %r14,schedule # call scheduler
stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts
tm __TI_flags+7(%r9),_TIF_WORK_INT
jz io_leave # there is no work to do
j io_work_loop
#
# _TIF_SIGPENDING or _TIF_RESTORE_SIGMASK is set, call do_signal
#
io_sigpending:
stosm __SF_EMPTY(%r15),0x03 # reenable interrupts
la %r2,SP_PTREGS(%r15) # load pt_regs
brasl %r14,do_signal # call do_signal
stnsm __SF_EMPTY(%r15),0xfc # disable I/O and ext. interrupts
j io_work_loop
/*
* External interrupt handler routine
*/
.globl ext_int_handler
ext_int_handler:
STORE_TIMER __LC_ASYNC_ENTER_TIMER
stck __LC_INT_CLOCK
SAVE_ALL_BASE __LC_SAVE_AREA+32
SAVE_ALL_ASYNC __LC_EXT_OLD_PSW,__LC_SAVE_AREA+32
CREATE_STACK_FRAME __LC_EXT_OLD_PSW,__LC_SAVE_AREA+32
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
tm SP_PSW+1(%r15),0x01 # interrupting from user ?
jz ext_no_vtime
UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
mvc __LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER
ext_no_vtime:
#endif
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
la %r2,SP_PTREGS(%r15) # address of register-save area
llgh %r3,__LC_EXT_INT_CODE # get interruption code
brasl %r14,do_extint
j io_return
__critical_end:
/*
* Machine check handler routines
*/
.globl mcck_int_handler
mcck_int_handler:
la %r1,4095 # revalidate r1
spt __LC_CPU_TIMER_SAVE_AREA-4095(%r1) # revalidate cpu timer
lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)# revalidate gprs
SAVE_ALL_BASE __LC_SAVE_AREA+64
la %r12,__LC_MCK_OLD_PSW
tm __LC_MCCK_CODE,0x80 # system damage?
jo mcck_int_main # yes -> rest of mcck code invalid
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
la %r14,4095
mvc __LC_SAVE_AREA+104(8),__LC_ASYNC_ENTER_TIMER
mvc __LC_ASYNC_ENTER_TIMER(8),__LC_CPU_TIMER_SAVE_AREA-4095(%r14)
tm __LC_MCCK_CODE+5,0x02 # stored cpu timer value valid?
jo 1f
la %r14,__LC_SYNC_ENTER_TIMER
clc 0(8,%r14),__LC_ASYNC_ENTER_TIMER
jl 0f
la %r14,__LC_ASYNC_ENTER_TIMER
0: clc 0(8,%r14),__LC_EXIT_TIMER
jl 0f
la %r14,__LC_EXIT_TIMER
0: clc 0(8,%r14),__LC_LAST_UPDATE_TIMER
jl 0f
la %r14,__LC_LAST_UPDATE_TIMER
0: spt 0(%r14)
mvc __LC_ASYNC_ENTER_TIMER(8),0(%r14)
1:
#endif
tm __LC_MCCK_CODE+2,0x09 # mwp + ia of old psw valid?
jno mcck_int_main # no -> skip cleanup critical
tm __LC_MCK_OLD_PSW+1,0x01 # test problem state bit
jnz mcck_int_main # from user -> load kernel stack
clc __LC_MCK_OLD_PSW+8(8),BASED(.Lcritical_end)
jhe mcck_int_main
clc __LC_MCK_OLD_PSW+8(8),BASED(.Lcritical_start)
jl mcck_int_main
brasl %r14,cleanup_critical
mcck_int_main:
lg %r14,__LC_PANIC_STACK # are we already on the panic stack?
slgr %r14,%r15
srag %r14,%r14,PAGE_SHIFT
jz 0f
lg %r15,__LC_PANIC_STACK # load panic stack
0: CREATE_STACK_FRAME __LC_MCK_OLD_PSW,__LC_SAVE_AREA+64
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
tm __LC_MCCK_CODE+2,0x08 # mwp of old psw valid?
jno mcck_no_vtime # no -> no timer update
tm SP_PSW+1(%r15),0x01 # interrupting from user ?
jz mcck_no_vtime
UPDATE_VTIME __LC_EXIT_TIMER,__LC_ASYNC_ENTER_TIMER,__LC_USER_TIMER
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
mvc __LC_LAST_UPDATE_TIMER(8),__LC_ASYNC_ENTER_TIMER
mcck_no_vtime:
#endif
lg %r9,__LC_THREAD_INFO # load pointer to thread_info struct
la %r2,SP_PTREGS(%r15) # load pt_regs
brasl %r14,s390_do_machine_check
tm SP_PSW+1(%r15),0x01 # returning to user ?
jno mcck_return
lg %r1,__LC_KERNEL_STACK # switch to kernel stack
aghi %r1,-SP_SIZE
mvc SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15)
xc __SF_BACKCHAIN(8,%r1),__SF_BACKCHAIN(%r1) # clear back chain
lgr %r15,%r1
stosm __SF_EMPTY(%r15),0x04 # turn dat on
tm __TI_flags+7(%r9),_TIF_MCCK_PENDING
jno mcck_return
brasl %r14,s390_handle_mcck
mcck_return:
mvc __LC_RETURN_MCCK_PSW(16),SP_PSW(%r15) # move return PSW
ni __LC_RETURN_MCCK_PSW+1,0xfd # clear wait state bit
lmg %r0,%r15,SP_R0(%r15) # load gprs 0-15
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
mvc __LC_ASYNC_ENTER_TIMER(8),__LC_SAVE_AREA+104
tm __LC_RETURN_MCCK_PSW+1,0x01 # returning to user ?
jno 0f
stpt __LC_EXIT_TIMER
0:
#endif
lpswe __LC_RETURN_MCCK_PSW # back to caller
#ifdef CONFIG_SMP
/*
* Restart interruption handler, kick starter for additional CPUs
*/
.globl restart_int_handler
restart_int_handler:
lg %r15,__LC_SAVE_AREA+120 # load ksp
lghi %r10,__LC_CREGS_SAVE_AREA
lctlg %c0,%c15,0(%r10) # get new ctl regs
lghi %r10,__LC_AREGS_SAVE_AREA
lam %a0,%a15,0(%r10)
lmg %r6,%r15,__SF_GPRS(%r15) # load registers from clone
stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on
jg start_secondary
#else
/*
* If we do not run with SMP enabled, let the new CPU crash ...
*/
.globl restart_int_handler
restart_int_handler:
basr %r1,0
restart_base:
lpswe restart_crash-restart_base(%r1)
.align 8
restart_crash:
.long 0x000a0000,0x00000000,0x00000000,0x00000000
restart_go:
#endif
#ifdef CONFIG_CHECK_STACK
/*
* The synchronous or the asynchronous stack overflowed. We are dead.
* No need to properly save the registers, we are going to panic anyway.
* Setup a pt_regs so that show_trace can provide a good call trace.
*/
stack_overflow:
lg %r15,__LC_PANIC_STACK # change to panic stack
aghi %r1,-SP_SIZE
mvc SP_PSW(16,%r15),0(%r12) # move user PSW to stack
stmg %r0,%r11,SP_R0(%r15) # store gprs %r0-%r11 to kernel stack
la %r1,__LC_SAVE_AREA
chi %r12,__LC_SVC_OLD_PSW
je 0f
chi %r12,__LC_PGM_OLD_PSW
je 0f
la %r1,__LC_SAVE_AREA+16
0: mvc SP_R12(32,%r15),0(%r1) # move %r12-%r15 to stack
xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) # clear back chain
la %r2,SP_PTREGS(%r15) # load pt_regs
jg kernel_stack_overflow
#endif
cleanup_table_system_call:
.quad system_call, sysc_do_svc
cleanup_table_sysc_return:
.quad sysc_return, sysc_leave
cleanup_table_sysc_leave:
.quad sysc_leave, sysc_work_loop
cleanup_table_sysc_work_loop:
.quad sysc_work_loop, sysc_reschedule
cleanup_table_io_return:
.quad io_return, io_leave
cleanup_table_io_leave:
.quad io_leave, io_done
cleanup_table_io_work_loop:
.quad io_work_loop, io_mcck_pending
cleanup_critical:
clc 8(8,%r12),BASED(cleanup_table_system_call)
jl 0f
clc 8(8,%r12),BASED(cleanup_table_system_call+8)
jl cleanup_system_call
0:
clc 8(8,%r12),BASED(cleanup_table_sysc_return)
jl 0f
clc 8(8,%r12),BASED(cleanup_table_sysc_return+8)
jl cleanup_sysc_return
0:
clc 8(8,%r12),BASED(cleanup_table_sysc_leave)
jl 0f
clc 8(8,%r12),BASED(cleanup_table_sysc_leave+8)
jl cleanup_sysc_leave
0:
clc 8(8,%r12),BASED(cleanup_table_sysc_work_loop)
jl 0f
clc 8(8,%r12),BASED(cleanup_table_sysc_work_loop+8)
jl cleanup_sysc_return
0:
clc 8(8,%r12),BASED(cleanup_table_io_return)
jl 0f
clc 8(8,%r12),BASED(cleanup_table_io_return+8)
jl cleanup_io_return
0:
clc 8(8,%r12),BASED(cleanup_table_io_leave)
jl 0f
clc 8(8,%r12),BASED(cleanup_table_io_leave+8)
jl cleanup_io_leave
0:
clc 8(8,%r12),BASED(cleanup_table_io_work_loop)
jl 0f
clc 8(8,%r12),BASED(cleanup_table_io_work_loop+8)
jl cleanup_io_return
0:
br %r14
cleanup_system_call:
mvc __LC_RETURN_PSW(16),0(%r12)
cghi %r12,__LC_MCK_OLD_PSW
je 0f
la %r12,__LC_SAVE_AREA+32
j 1f
0: la %r12,__LC_SAVE_AREA+64
1:
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
clc __LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn+8)
jh 0f
mvc __LC_SYNC_ENTER_TIMER(8),__LC_ASYNC_ENTER_TIMER
0: clc __LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn+16)
jhe cleanup_vtime
#endif
clc __LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn)
jh 0f
mvc __LC_SAVE_AREA(32),0(%r12)
0: stg %r13,8(%r12)
stg %r12,__LC_SAVE_AREA+96 # argh
SAVE_ALL_SYNC __LC_SVC_OLD_PSW,__LC_SAVE_AREA
CREATE_STACK_FRAME __LC_SVC_OLD_PSW,__LC_SAVE_AREA
lg %r12,__LC_SAVE_AREA+96 # argh
stg %r15,24(%r12)
llgh %r7,__LC_SVC_INT_CODE
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
cleanup_vtime:
clc __LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn+24)
jhe cleanup_stime
tm SP_PSW+1(%r15),0x01 # interrupting from user ?
jz cleanup_novtime
UPDATE_VTIME __LC_EXIT_TIMER,__LC_SYNC_ENTER_TIMER,__LC_USER_TIMER
cleanup_stime:
clc __LC_RETURN_PSW+8(8),BASED(cleanup_system_call_insn+32)
jh cleanup_update
UPDATE_VTIME __LC_LAST_UPDATE_TIMER,__LC_EXIT_TIMER,__LC_SYSTEM_TIMER
cleanup_update:
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
cleanup_novtime:
#endif
mvc __LC_RETURN_PSW+8(8),BASED(cleanup_table_system_call+8)
la %r12,__LC_RETURN_PSW
br %r14
cleanup_system_call_insn:
.quad sysc_saveall
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
.quad system_call
.quad sysc_vtime
.quad sysc_stime
.quad sysc_update
#endif
cleanup_sysc_return:
mvc __LC_RETURN_PSW(8),0(%r12)
mvc __LC_RETURN_PSW+8(8),BASED(cleanup_table_sysc_return)
la %r12,__LC_RETURN_PSW
br %r14
cleanup_sysc_leave:
clc 8(8,%r12),BASED(cleanup_sysc_leave_insn)
je 2f
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
mvc __LC_EXIT_TIMER(8),__LC_ASYNC_ENTER_TIMER
clc 8(8,%r12),BASED(cleanup_sysc_leave_insn+8)
je 2f
#endif
mvc __LC_RETURN_PSW(16),SP_PSW(%r15)
cghi %r12,__LC_MCK_OLD_PSW
jne 0f
mvc __LC_SAVE_AREA+64(32),SP_R12(%r15)
j 1f
0: mvc __LC_SAVE_AREA+32(32),SP_R12(%r15)
1: lmg %r0,%r11,SP_R0(%r15)
lg %r15,SP_R15(%r15)
2: la %r12,__LC_RETURN_PSW
br %r14
cleanup_sysc_leave_insn:
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
.quad sysc_leave + 16
#endif
.quad sysc_leave + 12
cleanup_io_return:
mvc __LC_RETURN_PSW(8),0(%r12)
mvc __LC_RETURN_PSW+8(8),BASED(cleanup_table_io_work_loop)
la %r12,__LC_RETURN_PSW
br %r14
cleanup_io_leave:
clc 8(8,%r12),BASED(cleanup_io_leave_insn)
je 2f
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
mvc __LC_EXIT_TIMER(8),__LC_ASYNC_ENTER_TIMER
clc 8(8,%r12),BASED(cleanup_io_leave_insn+8)
je 2f
#endif
mvc __LC_RETURN_PSW(16),SP_PSW(%r15)
cghi %r12,__LC_MCK_OLD_PSW
jne 0f
mvc __LC_SAVE_AREA+64(32),SP_R12(%r15)
j 1f
0: mvc __LC_SAVE_AREA+32(32),SP_R12(%r15)
1: lmg %r0,%r11,SP_R0(%r15)
lg %r15,SP_R15(%r15)
2: la %r12,__LC_RETURN_PSW
br %r14
cleanup_io_leave_insn:
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
.quad io_leave + 20
#endif
.quad io_leave + 16
/*
* Integer constants
*/
.align 4
.Lconst:
.Lc_pactive: .long PREEMPT_ACTIVE
.Lnr_syscalls: .long NR_syscalls
.L0x0130: .short 0x130
.L0x0140: .short 0x140
.L0x0150: .short 0x150
.L0x0160: .short 0x160
.L0x0170: .short 0x170
.Lcritical_start:
.quad __critical_start
.Lcritical_end:
.quad __critical_end
.section .rodata, "a"
#define SYSCALL(esa,esame,emu) .long esame
sys_call_table:
#include "syscalls.S"
#undef SYSCALL
#ifdef CONFIG_COMPAT
#define SYSCALL(esa,esame,emu) .long emu
sys_call_table_emu:
#include "syscalls.S"
#undef SYSCALL
#endif
View Git Blame Copy Permalink