mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-22 12:14:01 +08:00
278b45b06b
Both IRQ and GPIO controllers can now be represented in DT. The IRQ controllers are setup first, and then the GPIO controllers. Interrupts for GPIO lines are placed directly after the main interrupts in the interrupt space. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@googlemail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Josh Coombs <josh.coombs@gmail.com> Tested-by: Simon Baatz <gmbnomis@gmail.com>
53 lines
1.6 KiB
Plaintext
53 lines
1.6 KiB
Plaintext
* Marvell PXA GPIO controller
|
|
|
|
Required properties:
|
|
- compatible : Should be "mrvl,pxa-gpio" or "mrvl,mmp-gpio"
|
|
- reg : Address and length of the register set for the device
|
|
- interrupts : Should be the port interrupt shared by all gpio pins.
|
|
There're three gpio interrupts in arch-pxa, and they're gpio0,
|
|
gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp,
|
|
gpio_mux.
|
|
- interrupt-name : Should be the name of irq resource. Each interrupt
|
|
binds its interrupt-name.
|
|
- interrupt-controller : Identifies the node as an interrupt controller.
|
|
- #interrupt-cells: Specifies the number of cells needed to encode an
|
|
interrupt source.
|
|
- gpio-controller : Marks the device node as a gpio controller.
|
|
- #gpio-cells : Should be one. It is the pin number.
|
|
|
|
Example:
|
|
|
|
gpio: gpio@d4019000 {
|
|
compatible = "mrvl,mmp-gpio";
|
|
reg = <0xd4019000 0x1000>;
|
|
interrupts = <49>;
|
|
interrupt-name = "gpio_mux";
|
|
gpio-controller;
|
|
#gpio-cells = <1>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
|
|
* Marvell Orion GPIO Controller
|
|
|
|
Required properties:
|
|
- compatible : Should be "marvell,orion-gpio"
|
|
- reg : Address and length of the register set for controller.
|
|
- gpio-controller : So we know this is a gpio controller.
|
|
- ngpio : How many gpios this controller has.
|
|
- interrupts : Up to 4 Interrupts for the controller.
|
|
|
|
Optional properties:
|
|
- mask-offset : For SMP Orions, offset for Nth CPU
|
|
|
|
Example:
|
|
|
|
gpio0: gpio@10100 {
|
|
compatible = "marvell,orion-gpio";
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
reg = <0x10100 0x40>;
|
|
ngpio = <32>;
|
|
interrupts = <35>, <36>, <37>, <38>;
|
|
};
|