2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-15 16:53:54 +08:00
linux-next/arch/s390/kernel/perf_cpum_cf.c
Christoph Lameter eb7e7d7663 s390: Replace __get_cpu_var uses
__get_cpu_var() is used for multiple purposes in the kernel source. One of
them is address calculation via the form &__get_cpu_var(x).  This calculates
the address for the instance of the percpu variable of the current processor
based on an offset.

Other use cases are for storing and retrieving data from the current
processors percpu area.  __get_cpu_var() can be used as an lvalue when
writing data or on the right side of an assignment.

__get_cpu_var() is defined as :

#define __get_cpu_var(var) (*this_cpu_ptr(&(var)))

__get_cpu_var() always only does an address determination. However, store
and retrieve operations could use a segment prefix (or global register on
other platforms) to avoid the address calculation.

this_cpu_write() and this_cpu_read() can directly take an offset into a
percpu area and use optimized assembly code to read and write per cpu
variables.

This patch converts __get_cpu_var into either an explicit address
calculation using this_cpu_ptr() or into a use of this_cpu operations that
use the offset.  Thereby address calculations are avoided and less registers
are used when code is generated.

At the end of the patch set all uses of __get_cpu_var have been removed so
the macro is removed too.

The patch set includes passes over all arches as well. Once these operations
are used throughout then specialized macros can be defined in non -x86
arches as well in order to optimize per cpu access by f.e.  using a global
register that may be set to the per cpu base.

Transformations done to __get_cpu_var()

1. Determine the address of the percpu instance of the current processor.

	DEFINE_PER_CPU(int, y);
	int *x = &__get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(&y);

2. Same as #1 but this time an array structure is involved.

	DEFINE_PER_CPU(int, y[20]);
	int *x = __get_cpu_var(y);

    Converts to

	int *x = this_cpu_ptr(y);

3. Retrieve the content of the current processors instance of a per cpu
variable.

	DEFINE_PER_CPU(int, y);
	int x = __get_cpu_var(y)

   Converts to

	int x = __this_cpu_read(y);

4. Retrieve the content of a percpu struct

	DEFINE_PER_CPU(struct mystruct, y);
	struct mystruct x = __get_cpu_var(y);

   Converts to

	memcpy(&x, this_cpu_ptr(&y), sizeof(x));

5. Assignment to a per cpu variable

	DEFINE_PER_CPU(int, y)
	__get_cpu_var(y) = x;

   Converts to

	this_cpu_write(y, x);

6. Increment/Decrement etc of a per cpu variable

	DEFINE_PER_CPU(int, y);
	__get_cpu_var(y)++

   Converts to

	this_cpu_inc(y)

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
CC: linux390@de.ibm.com
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-26 13:45:52 -04:00

697 lines
18 KiB
C

/*
* Performance event support for s390x - CPU-measurement Counter Facility
*
* Copyright IBM Corp. 2012
* Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License (version 2 only)
* as published by the Free Software Foundation.
*/
#define KMSG_COMPONENT "cpum_cf"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/kernel.h>
#include <linux/kernel_stat.h>
#include <linux/perf_event.h>
#include <linux/percpu.h>
#include <linux/notifier.h>
#include <linux/init.h>
#include <linux/export.h>
#include <asm/ctl_reg.h>
#include <asm/irq.h>
#include <asm/cpu_mf.h>
/* CPU-measurement counter facility supports these CPU counter sets:
* For CPU counter sets:
* Basic counter set: 0-31
* Problem-state counter set: 32-63
* Crypto-activity counter set: 64-127
* Extented counter set: 128-159
*/
enum cpumf_ctr_set {
/* CPU counter sets */
CPUMF_CTR_SET_BASIC = 0,
CPUMF_CTR_SET_USER = 1,
CPUMF_CTR_SET_CRYPTO = 2,
CPUMF_CTR_SET_EXT = 3,
/* Maximum number of counter sets */
CPUMF_CTR_SET_MAX,
};
#define CPUMF_LCCTL_ENABLE_SHIFT 16
#define CPUMF_LCCTL_ACTCTL_SHIFT 0
static const u64 cpumf_state_ctl[CPUMF_CTR_SET_MAX] = {
[CPUMF_CTR_SET_BASIC] = 0x02,
[CPUMF_CTR_SET_USER] = 0x04,
[CPUMF_CTR_SET_CRYPTO] = 0x08,
[CPUMF_CTR_SET_EXT] = 0x01,
};
static void ctr_set_enable(u64 *state, int ctr_set)
{
*state |= cpumf_state_ctl[ctr_set] << CPUMF_LCCTL_ENABLE_SHIFT;
}
static void ctr_set_disable(u64 *state, int ctr_set)
{
*state &= ~(cpumf_state_ctl[ctr_set] << CPUMF_LCCTL_ENABLE_SHIFT);
}
static void ctr_set_start(u64 *state, int ctr_set)
{
*state |= cpumf_state_ctl[ctr_set] << CPUMF_LCCTL_ACTCTL_SHIFT;
}
static void ctr_set_stop(u64 *state, int ctr_set)
{
*state &= ~(cpumf_state_ctl[ctr_set] << CPUMF_LCCTL_ACTCTL_SHIFT);
}
/* Local CPUMF event structure */
struct cpu_hw_events {
struct cpumf_ctr_info info;
atomic_t ctr_set[CPUMF_CTR_SET_MAX];
u64 state, tx_state;
unsigned int flags;
};
static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = {
.ctr_set = {
[CPUMF_CTR_SET_BASIC] = ATOMIC_INIT(0),
[CPUMF_CTR_SET_USER] = ATOMIC_INIT(0),
[CPUMF_CTR_SET_CRYPTO] = ATOMIC_INIT(0),
[CPUMF_CTR_SET_EXT] = ATOMIC_INIT(0),
},
.state = 0,
.flags = 0,
};
static int get_counter_set(u64 event)
{
int set = -1;
if (event < 32)
set = CPUMF_CTR_SET_BASIC;
else if (event < 64)
set = CPUMF_CTR_SET_USER;
else if (event < 128)
set = CPUMF_CTR_SET_CRYPTO;
else if (event < 256)
set = CPUMF_CTR_SET_EXT;
return set;
}
static int validate_event(const struct hw_perf_event *hwc)
{
switch (hwc->config_base) {
case CPUMF_CTR_SET_BASIC:
case CPUMF_CTR_SET_USER:
case CPUMF_CTR_SET_CRYPTO:
case CPUMF_CTR_SET_EXT:
/* check for reserved counters */
if ((hwc->config >= 6 && hwc->config <= 31) ||
(hwc->config >= 38 && hwc->config <= 63) ||
(hwc->config >= 80 && hwc->config <= 127))
return -EOPNOTSUPP;
break;
default:
return -EINVAL;
}
return 0;
}
static int validate_ctr_version(const struct hw_perf_event *hwc)
{
struct cpu_hw_events *cpuhw;
int err = 0;
cpuhw = &get_cpu_var(cpu_hw_events);
/* check required version for counter sets */
switch (hwc->config_base) {
case CPUMF_CTR_SET_BASIC:
case CPUMF_CTR_SET_USER:
if (cpuhw->info.cfvn < 1)
err = -EOPNOTSUPP;
break;
case CPUMF_CTR_SET_CRYPTO:
case CPUMF_CTR_SET_EXT:
if (cpuhw->info.csvn < 1)
err = -EOPNOTSUPP;
if ((cpuhw->info.csvn == 1 && hwc->config > 159) ||
(cpuhw->info.csvn == 2 && hwc->config > 175) ||
(cpuhw->info.csvn > 2 && hwc->config > 255))
err = -EOPNOTSUPP;
break;
}
put_cpu_var(cpu_hw_events);
return err;
}
static int validate_ctr_auth(const struct hw_perf_event *hwc)
{
struct cpu_hw_events *cpuhw;
u64 ctrs_state;
int err = 0;
cpuhw = &get_cpu_var(cpu_hw_events);
/* check authorization for cpu counter sets */
ctrs_state = cpumf_state_ctl[hwc->config_base];
if (!(ctrs_state & cpuhw->info.auth_ctl))
err = -EPERM;
put_cpu_var(cpu_hw_events);
return err;
}
/*
* Change the CPUMF state to active.
* Enable and activate the CPU-counter sets according
* to the per-cpu control state.
*/
static void cpumf_pmu_enable(struct pmu *pmu)
{
struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events);
int err;
if (cpuhw->flags & PMU_F_ENABLED)
return;
err = lcctl(cpuhw->state);
if (err) {
pr_err("Enabling the performance measuring unit "
"failed with rc=%x\n", err);
return;
}
cpuhw->flags |= PMU_F_ENABLED;
}
/*
* Change the CPUMF state to inactive.
* Disable and enable (inactive) the CPU-counter sets according
* to the per-cpu control state.
*/
static void cpumf_pmu_disable(struct pmu *pmu)
{
struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events);
int err;
u64 inactive;
if (!(cpuhw->flags & PMU_F_ENABLED))
return;
inactive = cpuhw->state & ~((1 << CPUMF_LCCTL_ENABLE_SHIFT) - 1);
err = lcctl(inactive);
if (err) {
pr_err("Disabling the performance measuring unit "
"failed with rc=%x\n", err);
return;
}
cpuhw->flags &= ~PMU_F_ENABLED;
}
/* Number of perf events counting hardware events */
static atomic_t num_events = ATOMIC_INIT(0);
/* Used to avoid races in calling reserve/release_cpumf_hardware */
static DEFINE_MUTEX(pmc_reserve_mutex);
/* CPU-measurement alerts for the counter facility */
static void cpumf_measurement_alert(struct ext_code ext_code,
unsigned int alert, unsigned long unused)
{
struct cpu_hw_events *cpuhw;
if (!(alert & CPU_MF_INT_CF_MASK))
return;
inc_irq_stat(IRQEXT_CMC);
cpuhw = this_cpu_ptr(&cpu_hw_events);
/* Measurement alerts are shared and might happen when the PMU
* is not reserved. Ignore these alerts in this case. */
if (!(cpuhw->flags & PMU_F_RESERVED))
return;
/* counter authorization change alert */
if (alert & CPU_MF_INT_CF_CACA)
qctri(&cpuhw->info);
/* loss of counter data alert */
if (alert & CPU_MF_INT_CF_LCDA)
pr_err("CPU[%i] Counter data was lost\n", smp_processor_id());
}
#define PMC_INIT 0
#define PMC_RELEASE 1
static void setup_pmc_cpu(void *flags)
{
struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events);
switch (*((int *) flags)) {
case PMC_INIT:
memset(&cpuhw->info, 0, sizeof(cpuhw->info));
qctri(&cpuhw->info);
cpuhw->flags |= PMU_F_RESERVED;
break;
case PMC_RELEASE:
cpuhw->flags &= ~PMU_F_RESERVED;
break;
}
/* Disable CPU counter sets */
lcctl(0);
}
/* Initialize the CPU-measurement facility */
static int reserve_pmc_hardware(void)
{
int flags = PMC_INIT;
on_each_cpu(setup_pmc_cpu, &flags, 1);
irq_subclass_register(IRQ_SUBCLASS_MEASUREMENT_ALERT);
return 0;
}
/* Release the CPU-measurement facility */
static void release_pmc_hardware(void)
{
int flags = PMC_RELEASE;
on_each_cpu(setup_pmc_cpu, &flags, 1);
irq_subclass_unregister(IRQ_SUBCLASS_MEASUREMENT_ALERT);
}
/* Release the PMU if event is the last perf event */
static void hw_perf_event_destroy(struct perf_event *event)
{
if (!atomic_add_unless(&num_events, -1, 1)) {
mutex_lock(&pmc_reserve_mutex);
if (atomic_dec_return(&num_events) == 0)
release_pmc_hardware();
mutex_unlock(&pmc_reserve_mutex);
}
}
/* CPUMF <-> perf event mappings for kernel+userspace (basic set) */
static const int cpumf_generic_events_basic[] = {
[PERF_COUNT_HW_CPU_CYCLES] = 0,
[PERF_COUNT_HW_INSTRUCTIONS] = 1,
[PERF_COUNT_HW_CACHE_REFERENCES] = -1,
[PERF_COUNT_HW_CACHE_MISSES] = -1,
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = -1,
[PERF_COUNT_HW_BRANCH_MISSES] = -1,
[PERF_COUNT_HW_BUS_CYCLES] = -1,
};
/* CPUMF <-> perf event mappings for userspace (problem-state set) */
static const int cpumf_generic_events_user[] = {
[PERF_COUNT_HW_CPU_CYCLES] = 32,
[PERF_COUNT_HW_INSTRUCTIONS] = 33,
[PERF_COUNT_HW_CACHE_REFERENCES] = -1,
[PERF_COUNT_HW_CACHE_MISSES] = -1,
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = -1,
[PERF_COUNT_HW_BRANCH_MISSES] = -1,
[PERF_COUNT_HW_BUS_CYCLES] = -1,
};
static int __hw_perf_event_init(struct perf_event *event)
{
struct perf_event_attr *attr = &event->attr;
struct hw_perf_event *hwc = &event->hw;
int err;
u64 ev;
switch (attr->type) {
case PERF_TYPE_RAW:
/* Raw events are used to access counters directly,
* hence do not permit excludes */
if (attr->exclude_kernel || attr->exclude_user ||
attr->exclude_hv)
return -EOPNOTSUPP;
ev = attr->config;
break;
case PERF_TYPE_HARDWARE:
ev = attr->config;
/* Count user space (problem-state) only */
if (!attr->exclude_user && attr->exclude_kernel) {
if (ev >= ARRAY_SIZE(cpumf_generic_events_user))
return -EOPNOTSUPP;
ev = cpumf_generic_events_user[ev];
/* No support for kernel space counters only */
} else if (!attr->exclude_kernel && attr->exclude_user) {
return -EOPNOTSUPP;
/* Count user and kernel space */
} else {
if (ev >= ARRAY_SIZE(cpumf_generic_events_basic))
return -EOPNOTSUPP;
ev = cpumf_generic_events_basic[ev];
}
break;
default:
return -ENOENT;
}
if (ev == -1)
return -ENOENT;
if (ev >= PERF_CPUM_CF_MAX_CTR)
return -EINVAL;
/* Use the hardware perf event structure to store the counter number
* in 'config' member and the counter set to which the counter belongs
* in the 'config_base'. The counter set (config_base) is then used
* to enable/disable the counters.
*/
hwc->config = ev;
hwc->config_base = get_counter_set(ev);
/* Validate the counter that is assigned to this event.
* Because the counter facility can use numerous counters at the
* same time without constraints, it is not necessary to explicity
* validate event groups (event->group_leader != event).
*/
err = validate_event(hwc);
if (err)
return err;
/* Initialize for using the CPU-measurement counter facility */
if (!atomic_inc_not_zero(&num_events)) {
mutex_lock(&pmc_reserve_mutex);
if (atomic_read(&num_events) == 0 && reserve_pmc_hardware())
err = -EBUSY;
else
atomic_inc(&num_events);
mutex_unlock(&pmc_reserve_mutex);
}
event->destroy = hw_perf_event_destroy;
/* Finally, validate version and authorization of the counter set */
err = validate_ctr_auth(hwc);
if (!err)
err = validate_ctr_version(hwc);
return err;
}
static int cpumf_pmu_event_init(struct perf_event *event)
{
int err;
switch (event->attr.type) {
case PERF_TYPE_HARDWARE:
case PERF_TYPE_HW_CACHE:
case PERF_TYPE_RAW:
err = __hw_perf_event_init(event);
break;
default:
return -ENOENT;
}
if (unlikely(err) && event->destroy)
event->destroy(event);
return err;
}
static int hw_perf_event_reset(struct perf_event *event)
{
u64 prev, new;
int err;
do {
prev = local64_read(&event->hw.prev_count);
err = ecctr(event->hw.config, &new);
if (err) {
if (err != 3)
break;
/* The counter is not (yet) available. This
* might happen if the counter set to which
* this counter belongs is in the disabled
* state.
*/
new = 0;
}
} while (local64_cmpxchg(&event->hw.prev_count, prev, new) != prev);
return err;
}
static int hw_perf_event_update(struct perf_event *event)
{
u64 prev, new, delta;
int err;
do {
prev = local64_read(&event->hw.prev_count);
err = ecctr(event->hw.config, &new);
if (err)
goto out;
} while (local64_cmpxchg(&event->hw.prev_count, prev, new) != prev);
delta = (prev <= new) ? new - prev
: (-1ULL - prev) + new + 1; /* overflow */
local64_add(delta, &event->count);
out:
return err;
}
static void cpumf_pmu_read(struct perf_event *event)
{
if (event->hw.state & PERF_HES_STOPPED)
return;
hw_perf_event_update(event);
}
static void cpumf_pmu_start(struct perf_event *event, int flags)
{
struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
if (WARN_ON_ONCE(!(hwc->state & PERF_HES_STOPPED)))
return;
if (WARN_ON_ONCE(hwc->config == -1))
return;
if (flags & PERF_EF_RELOAD)
WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
hwc->state = 0;
/* (Re-)enable and activate the counter set */
ctr_set_enable(&cpuhw->state, hwc->config_base);
ctr_set_start(&cpuhw->state, hwc->config_base);
/* The counter set to which this counter belongs can be already active.
* Because all counters in a set are active, the event->hw.prev_count
* needs to be synchronized. At this point, the counter set can be in
* the inactive or disabled state.
*/
hw_perf_event_reset(event);
/* increment refcount for this counter set */
atomic_inc(&cpuhw->ctr_set[hwc->config_base]);
}
static void cpumf_pmu_stop(struct perf_event *event, int flags)
{
struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
if (!(hwc->state & PERF_HES_STOPPED)) {
/* Decrement reference count for this counter set and if this
* is the last used counter in the set, clear activation
* control and set the counter set state to inactive.
*/
if (!atomic_dec_return(&cpuhw->ctr_set[hwc->config_base]))
ctr_set_stop(&cpuhw->state, hwc->config_base);
event->hw.state |= PERF_HES_STOPPED;
}
if ((flags & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) {
hw_perf_event_update(event);
event->hw.state |= PERF_HES_UPTODATE;
}
}
static int cpumf_pmu_add(struct perf_event *event, int flags)
{
struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events);
/* Check authorization for the counter set to which this
* counter belongs.
* For group events transaction, the authorization check is
* done in cpumf_pmu_commit_txn().
*/
if (!(cpuhw->flags & PERF_EVENT_TXN))
if (validate_ctr_auth(&event->hw))
return -EPERM;
ctr_set_enable(&cpuhw->state, event->hw.config_base);
event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
if (flags & PERF_EF_START)
cpumf_pmu_start(event, PERF_EF_RELOAD);
perf_event_update_userpage(event);
return 0;
}
static void cpumf_pmu_del(struct perf_event *event, int flags)
{
struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events);
cpumf_pmu_stop(event, PERF_EF_UPDATE);
/* Check if any counter in the counter set is still used. If not used,
* change the counter set to the disabled state. This also clears the
* content of all counters in the set.
*
* When a new perf event has been added but not yet started, this can
* clear enable control and resets all counters in a set. Therefore,
* cpumf_pmu_start() always has to reenable a counter set.
*/
if (!atomic_read(&cpuhw->ctr_set[event->hw.config_base]))
ctr_set_disable(&cpuhw->state, event->hw.config_base);
perf_event_update_userpage(event);
}
/*
* Start group events scheduling transaction.
* Set flags to perform a single test at commit time.
*/
static void cpumf_pmu_start_txn(struct pmu *pmu)
{
struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events);
perf_pmu_disable(pmu);
cpuhw->flags |= PERF_EVENT_TXN;
cpuhw->tx_state = cpuhw->state;
}
/*
* Stop and cancel a group events scheduling tranctions.
* Assumes cpumf_pmu_del() is called for each successful added
* cpumf_pmu_add() during the transaction.
*/
static void cpumf_pmu_cancel_txn(struct pmu *pmu)
{
struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events);
WARN_ON(cpuhw->tx_state != cpuhw->state);
cpuhw->flags &= ~PERF_EVENT_TXN;
perf_pmu_enable(pmu);
}
/*
* Commit the group events scheduling transaction. On success, the
* transaction is closed. On error, the transaction is kept open
* until cpumf_pmu_cancel_txn() is called.
*/
static int cpumf_pmu_commit_txn(struct pmu *pmu)
{
struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events);
u64 state;
/* check if the updated state can be scheduled */
state = cpuhw->state & ~((1 << CPUMF_LCCTL_ENABLE_SHIFT) - 1);
state >>= CPUMF_LCCTL_ENABLE_SHIFT;
if ((state & cpuhw->info.auth_ctl) != state)
return -EPERM;
cpuhw->flags &= ~PERF_EVENT_TXN;
perf_pmu_enable(pmu);
return 0;
}
/* Performance monitoring unit for s390x */
static struct pmu cpumf_pmu = {
.pmu_enable = cpumf_pmu_enable,
.pmu_disable = cpumf_pmu_disable,
.event_init = cpumf_pmu_event_init,
.add = cpumf_pmu_add,
.del = cpumf_pmu_del,
.start = cpumf_pmu_start,
.stop = cpumf_pmu_stop,
.read = cpumf_pmu_read,
.start_txn = cpumf_pmu_start_txn,
.commit_txn = cpumf_pmu_commit_txn,
.cancel_txn = cpumf_pmu_cancel_txn,
};
static int cpumf_pmu_notifier(struct notifier_block *self, unsigned long action,
void *hcpu)
{
unsigned int cpu = (long) hcpu;
int flags;
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_ONLINE:
flags = PMC_INIT;
smp_call_function_single(cpu, setup_pmc_cpu, &flags, 1);
break;
case CPU_DOWN_PREPARE:
flags = PMC_RELEASE;
smp_call_function_single(cpu, setup_pmc_cpu, &flags, 1);
break;
default:
break;
}
return NOTIFY_OK;
}
static int __init cpumf_pmu_init(void)
{
int rc;
if (!cpum_cf_avail())
return -ENODEV;
/* clear bit 15 of cr0 to unauthorize problem-state to
* extract measurement counters */
ctl_clear_bit(0, 48);
/* register handler for measurement-alert interruptions */
rc = register_external_irq(EXT_IRQ_MEASURE_ALERT,
cpumf_measurement_alert);
if (rc) {
pr_err("Registering for CPU-measurement alerts "
"failed with rc=%i\n", rc);
goto out;
}
/* The CPU measurement counter facility does not have overflow
* interrupts to do sampling. Sampling must be provided by
* external means, for example, by timers.
*/
cpumf_pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
cpumf_pmu.attr_groups = cpumf_cf_event_group();
rc = perf_pmu_register(&cpumf_pmu, "cpum_cf", PERF_TYPE_RAW);
if (rc) {
pr_err("Registering the cpum_cf PMU failed with rc=%i\n", rc);
unregister_external_irq(EXT_IRQ_MEASURE_ALERT,
cpumf_measurement_alert);
goto out;
}
perf_cpu_notifier(cpumf_pmu_notifier);
out:
return rc;
}
early_initcall(cpumf_pmu_init);