Jonathan Cameron 315a19eca0 iio:buffers: Push some docs down into the .c file. ... Ancient legacy of me doing it wrong which it is nice to clear up whilst we are here. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>		2017-01-10 19:54:51 +00:00
..
accel	iio:buffer: Introduced a function to assign the buffer specific attrs.	2017-01-10 19:54:50 +00:00
adc	iio: adc: spmi-vadc: Changes to support different scaling	2016-12-10 17:28:21 +00:00
amplifiers	spi: Updates for v4.4	2015-11-05 13:15:12 -08:00
buffer	iio: add resource managed triggered buffer init helpers	2016-09-04 15:42:46 +01:00
chemical	iio:chemical:atlas-ph-sensor: Fix use of 32 bit int to hold 16 bit big endian value	2016-10-23 22:18:27 +01:00
common	iio: accel: hid-sensor-accel-3d: Add timestamp	2016-12-03 10:06:13 +00:00
counter	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
dac	iio: dac: ad5593r: Add ACPI support	2016-12-30 17:20:14 +00:00
dummy	iio: dummy: No semicolon at end of function definition	2016-12-30 18:35:05 +00:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	iio: gyro: st_gyro: inline per-sensor data	2016-11-12 15:38:09 +00:00
health	First round of IIO new device support, features and cleanups for the 4.8 cycle.	2016-06-09 09:15:58 -07:00
humidity	iio: humidity: Support acpi probe for hts211	2016-12-03 08:56:28 +00:00
imu	iio: bmi160: Add of device table for spi	2016-12-30 10:38:19 +00:00
light	iio: light: add driver for Capella CM3605	2016-12-30 17:17:39 +00:00
magnetometer	iio: magnetometer: separate the values of attributes based on their usage type for HID compass sensor	2016-11-24 20:41:30 +00:00
orientation	iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver)	2016-11-05 17:47:47 +00:00
potentiometer	iio: mcp4531: provide range of available raw values	2016-11-13 11:40:26 +00:00
potentiostat	iio: potentiostat: add LMP91000 support	2016-09-27 20:33:03 +01:00
pressure	iio: st_pressure: Export sampling frequency for lps25h and lps331ap	2016-12-30 11:33:56 +00:00
proximity	iio: pulsedlight-lidar-lite-v2: add lidar-lite-v3 property	2016-12-31 15:18:31 +00:00
temperature	iio: maxim_thermocouple: detect invalid storage size in read()	2016-11-13 10:08:32 +01:00
trigger	iio:trigger: Experimental kthread tight loop trigger (thread only)	2016-06-03 13:18:44 +01:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	iio:buffers: Push some docs down into the .c file.	2017-01-10 19:54:51 +00:00
industrialio-configfs.c	iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem	2015-12-05 16:25:30 +00:00
industrialio-core.c	iio: Add channel for Gravity	2017-01-05 13:02:25 +00:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c	iio: core: fix ptr_ret.cocci warnings	2016-01-20 17:09:18 -08:00
industrialio-trigger.c	iio:trigger: Add helper function to verify that a trigger belongs to the same device	2016-09-27 20:32:55 +01:00
industrialio-triggered-event.c	iio: Support triggered events	2015-08-27 20:47:09 +01:00
inkern.c	iio: inkern: add helpers to query available values from channels	2016-11-13 11:40:26 +00:00
Kconfig	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
Makefile	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00