mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-28 15:13:55 +08:00
0ddce71c21
This is the initial codec driver for rt5682. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
51 lines
1.0 KiB
Plaintext
51 lines
1.0 KiB
Plaintext
RT5682 audio CODEC
|
|
|
|
This device supports I2C only.
|
|
|
|
Required properties:
|
|
|
|
- compatible : "realtek,rt5682" or "realtek,rt5682i"
|
|
|
|
- reg : The I2C address of the device.
|
|
|
|
Optional properties:
|
|
|
|
- interrupts : The CODEC's interrupt output.
|
|
|
|
- realtek,dmic1-data-pin
|
|
0: dmic1 is not used
|
|
1: using GPIO2 pin as dmic1 data pin
|
|
2: using GPIO5 pin as dmic1 data pin
|
|
|
|
- realtek,dmic1-clk-pin
|
|
0: using GPIO1 pin as dmic1 clock pin
|
|
1: using GPIO3 pin as dmic1 clock pin
|
|
|
|
- realtek,jd-src
|
|
0: No JD is used
|
|
1: using JD1 as JD source
|
|
|
|
- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
|
|
|
|
Pins on the device (for linking into audio routes) for RT5682:
|
|
|
|
* DMIC L1
|
|
* DMIC R1
|
|
* IN1P
|
|
* HPOL
|
|
* HPOR
|
|
|
|
Example:
|
|
|
|
rt5682 {
|
|
compatible = "realtek,rt5682i";
|
|
reg = <0x1a>;
|
|
interrupt-parent = <&gpio>;
|
|
interrupts = <TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
|
|
realtek,ldo1-en-gpios =
|
|
<&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
|
|
realtek,dmic1-data-pin = <1>;
|
|
realtek,dmic1-clk-pin = <1>;
|
|
realtek,jd-src = <1>;
|
|
};
|