mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-28 15:13:55 +08:00
3b7ce99748
Add support for the InvenSense ICS-43432 I2S MEMS microphone. This is a non-software-configurable MEMS microphone with I2S output. Tested on a setup with a single ICS-43432 (the device itself supports stereo operation using a hardware pin controlling left vs. right channel output). Signed-off-by: Ricard Wanderlof <ricardw@axis.com> Signed-off-by: Mark Brown <broonie@kernel.org>
18 lines
616 B
Plaintext
18 lines
616 B
Plaintext
Invensense ICS-43432 MEMS microphone with I2S output.
|
|
|
|
There are no software configuration options for this device, indeed, the only
|
|
host connection is the I2S interface. Apart from requirements on clock
|
|
frequency (460 kHz to 3.379 MHz according to the data sheet) there must be
|
|
64 clock cycles in each stereo output frame; 24 of the 32 available bits
|
|
contain audio data. A hardware pin determines if the device outputs data
|
|
on the left or right channel of the I2S frame.
|
|
|
|
Required properties:
|
|
- compatible : Must be "invensense,ics43432"
|
|
|
|
Example:
|
|
|
|
ics43432: ics43432 {
|
|
compatible = "invensense,ics43432";
|
|
};
|