mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-28 15:13:55 +08:00
8f51bb7cae
Add a binding for the STMicroelectronics STM32 IPCC block exposing a mailbox mechanism between two processors. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
48 lines
1.6 KiB
Plaintext
48 lines
1.6 KiB
Plaintext
* STMicroelectronics STM32 IPCC (Inter-Processor Communication Controller)
|
|
|
|
The IPCC block provides a non blocking signaling mechanism to post and
|
|
retrieve messages in an atomic way between two processors.
|
|
It provides the signaling for N bidirectionnal channels. The number of channels
|
|
(N) can be read from a dedicated register.
|
|
|
|
Required properties:
|
|
- compatible: Must be "st,stm32mp1-ipcc"
|
|
- reg: Register address range (base address and length)
|
|
- st,proc-id: Processor id using the mailbox (0 or 1)
|
|
- clocks: Input clock
|
|
- interrupt-names: List of names for the interrupts described by the interrupt
|
|
property. Must contain the following entries:
|
|
- "rx"
|
|
- "tx"
|
|
- "wakeup"
|
|
- interrupts: Interrupt specifiers for "rx channel occupied", "tx channel
|
|
free" and "system wakeup".
|
|
- #mbox-cells: Number of cells required for the mailbox specifier. Must be 1.
|
|
The data contained in the mbox specifier of the "mboxes"
|
|
property in the client node is the mailbox channel index.
|
|
|
|
Optional properties:
|
|
- wakeup-source: Flag to indicate whether this device can wake up the system
|
|
|
|
|
|
|
|
Example:
|
|
ipcc: mailbox@4c001000 {
|
|
compatible = "st,stm32mp1-ipcc";
|
|
#mbox-cells = <1>;
|
|
reg = <0x4c001000 0x400>;
|
|
st,proc-id = <0>;
|
|
interrupts-extended = <&intc GIC_SPI 100 IRQ_TYPE_NONE>,
|
|
<&intc GIC_SPI 101 IRQ_TYPE_NONE>,
|
|
<&aiec 62 1>;
|
|
interrupt-names = "rx", "tx", "wakeup";
|
|
clocks = <&rcc_clk IPCC>;
|
|
wakeup-source;
|
|
}
|
|
|
|
Client:
|
|
mbox_test {
|
|
...
|
|
mboxes = <&ipcc 0>, <&ipcc 1>;
|
|
};
|