Lendacky, Thomas 983942a5ea amd-xgbe-phy: Fix initial mode when autoneg is disabled ... When the ethtool command is used to set the speed of the device while the device is down, the check to set the initial mode may fail when the device is brought up, causing failure to bring the device up. Update the code to set the initial mode based on the desired speed if auto-negotiation is disabled. This patch fixes a bug introduced by: d9663c8c21 ("amd-xgbe-phy: Use phydev advertising field vs supported") Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>		2015-05-26 19:47:30 -04:00
..
amd-xgbe-phy.c	amd-xgbe-phy: Fix initial mode when autoneg is disabled	2015-05-26 19:47:30 -04:00
amd.c	net: phy: replace phy_driver_register calls	2014-11-12 13:52:53 -05:00
at803x.c	net: phy: at803x: simplify using devm_gpiod_get_optional and its 4th argument	2015-04-01 12:44:04 -04:00
bcm7xxx.c	net: phy: bcm7xxx: Fix 7425 PHY ID and flags	2015-05-25 00:16:07 -04:00
bcm63xx.c	net: phy: replace phy_drivers_register calls	2014-11-12 13:52:53 -05:00
bcm87xx.c	net: phy: replace phy_drivers_register calls	2014-11-12 13:52:53 -05:00
broadcom.c	net: phy: broadcom: Add BCM54616S phy entry	2015-04-08 15:28:13 -04:00
cicada.c	net: phy: replace phy_drivers_register calls	2014-11-12 13:52:53 -05:00
davicom.c	net: phy: replace phy_drivers_register calls	2014-11-12 13:52:53 -05:00
dp83640_reg.h	ptp: Added a clock driver for the National Semiconductor PHYTER.	2011-05-23 13:10:23 -07:00
dp83640.c	net: dp83640: fix improper double spin locking.	2015-05-25 18:21:59 -04:00
et1011c.c	net: phy: replace phy_driver_register calls	2014-11-12 13:52:53 -05:00
fixed_phy.c	add fixed_phy_update_state() - update state of fixed_phy	2015-04-03 15:08:20 -04:00
icplus.c	net: phy: replace phy_drivers_register calls	2014-11-12 13:52:53 -05:00
Kconfig	net: amd-xgbe: Add hardware dependency	2015-05-09 16:24:15 -04:00
lxt.c	net: phy: replace phy_drivers_register calls	2014-11-12 13:52:53 -05:00
Makefile	net: Allow FIXED_PHY to be modular.	2014-12-16 15:02:23 -05:00
marvell.c	net: phy: replace phy_drivers_register calls	2014-11-12 13:52:53 -05:00
mdio_bus.c	net: phy: avoid suspending twice a PHY	2015-01-27 00:16:51 -08:00
mdio-bcm-unimac.c	net: phy: constify of_device_id array	2015-03-17 15:00:23 -04:00
mdio-bitbang.c	Revert "drivers/net/phy/mdio-bitbang.c: Call mdiobus_unregister before mdiobus_free"	2012-11-14 22:32:15 -05:00
mdio-gpio.c	net: mdio-gpio: Allow for unspecified bus id	2015-05-10 19:42:11 -04:00
mdio-moxart.c	drivers/net: delete non-required instances of include <linux/init.h>	2014-01-16 11:53:26 -08:00
mdio-mux-gpio.c	mdio-mux-gpio: use new gpiod_get_array and gpiod_put_array functions	2015-04-27 13:35:40 -04:00
mdio-mux-mmioreg.c	net: phy: constify of_device_id array	2015-03-17 15:00:23 -04:00
mdio-mux.c	netdev/phy: skip disabled mdio-mux nodes	2012-08-20 02:16:00 -07:00
mdio-octeon.c	net: phy: constify of_device_id array	2015-03-17 15:00:23 -04:00
mdio-sun4i.c	net: sun4i: remove empty MDIO bus reset function	2014-03-28 01:38:02 -04:00
micrel.c	net: phy: micrel: Fix regression in kszphy_probe	2015-05-12 23:18:40 -04:00
national.c	net: phy: replace phy_driver_register calls	2014-11-12 13:52:53 -05:00
phy_device.c	net: phy: keep track of the PHY suspend state	2015-01-27 00:16:51 -08:00
phy.c	net: phy: Make sure phy_start() always re-enables the phy interrupts	2015-05-20 12:22:08 -04:00
qsemi.c	net: phy: replace phy_driver_register calls	2014-11-12 13:52:53 -05:00
realtek.c	net: phy: replace phy_drivers_register calls	2014-11-12 13:52:53 -05:00
smsc.c	net: phy: replace phy_drivers_register calls	2014-11-12 13:52:53 -05:00
spi_ks8995.c	net: phy: spi_ks8995: remove sysfs bin file by registered attribute	2014-11-04 17:18:45 -05:00
ste10Xp.c	net: phy: replace phy_drivers_register calls	2014-11-12 13:52:53 -05:00
vitesse.c	net: phy: replace phy_drivers_register calls	2014-11-12 13:52:53 -05:00