2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-05 11:54:01 +08:00
linux-next/arch/powerpc/perf/e500-pmu.c
Chris Freehill 15fab56eca powerpc/perf: Add stalled-cycles events
Support for stalled-cycles-frontend and stalled-cycles-backend is
added for e500-based processors.

The following mappings are used:

stalled-cycles-frontend or idle-cycles-frontend:
Com:18 Cycles decode stalled

stalled-cycles-backend or idle-cycles-backend
Com:19 cycles issue stalled

Signed-off-by: Chris Freehill <chrisf@freescale.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-10 17:00:56 +11:00

137 lines
3.7 KiB
C

/*
* Performance counter support for e500 family processors.
*
* Copyright 2008-2009 Paul Mackerras, IBM Corporation.
* Copyright 2010 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/string.h>
#include <linux/perf_event.h>
#include <asm/reg.h>
#include <asm/cputable.h>
/*
* Map of generic hardware event types to hardware events
* Zero if unsupported
*/
static int e500_generic_events[] = {
[PERF_COUNT_HW_CPU_CYCLES] = 1,
[PERF_COUNT_HW_INSTRUCTIONS] = 2,
[PERF_COUNT_HW_CACHE_MISSES] = 41, /* Data L1 cache reloads */
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = 12,
[PERF_COUNT_HW_BRANCH_MISSES] = 15,
[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = 18,
[PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = 19,
};
#define C(x) PERF_COUNT_HW_CACHE_##x
/*
* Table of generalized cache-related events.
* 0 means not supported, -1 means nonsensical, other values
* are event codes.
*/
static int e500_cache_events[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
/*
* D-cache misses are not split into read/write/prefetch;
* use raw event 41.
*/
[C(L1D)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 27, 0 },
[C(OP_WRITE)] = { 28, 0 },
[C(OP_PREFETCH)] = { 29, 0 },
},
[C(L1I)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 2, 60 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { 0, 0 },
},
/*
* Assuming LL means L2, it's not a good match for this model.
* It allocates only on L1 castout or explicit prefetch, and
* does not have separate read/write events (but it does have
* separate instruction/data events).
*/
[C(LL)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 0, 0 },
[C(OP_WRITE)] = { 0, 0 },
[C(OP_PREFETCH)] = { 0, 0 },
},
/*
* There are data/instruction MMU misses, but that's a miss on
* the chip's internal level-one TLB which is probably not
* what the user wants. Instead, unified level-two TLB misses
* are reported here.
*/
[C(DTLB)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 26, 66 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { -1, -1 },
},
[C(BPU)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { 12, 15 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { -1, -1 },
},
[C(NODE)] = { /* RESULT_ACCESS RESULT_MISS */
[C(OP_READ)] = { -1, -1 },
[C(OP_WRITE)] = { -1, -1 },
[C(OP_PREFETCH)] = { -1, -1 },
},
};
static int num_events = 128;
/* Upper half of event id is PMLCb, for threshold events */
static u64 e500_xlate_event(u64 event_id)
{
u32 event_low = (u32)event_id;
u64 ret;
if (event_low >= num_events)
return 0;
ret = FSL_EMB_EVENT_VALID;
if (event_low >= 76 && event_low <= 81) {
ret |= FSL_EMB_EVENT_RESTRICTED;
ret |= event_id &
(FSL_EMB_EVENT_THRESHMUL | FSL_EMB_EVENT_THRESH);
} else if (event_id &
(FSL_EMB_EVENT_THRESHMUL | FSL_EMB_EVENT_THRESH)) {
/* Threshold requested on non-threshold event */
return 0;
}
return ret;
}
static struct fsl_emb_pmu e500_pmu = {
.name = "e500 family",
.n_counter = 4,
.n_restricted = 2,
.xlate_event = e500_xlate_event,
.n_generic = ARRAY_SIZE(e500_generic_events),
.generic_events = e500_generic_events,
.cache_events = &e500_cache_events,
};
static int init_e500_pmu(void)
{
if (!cur_cpu_spec->oprofile_cpu_type)
return -ENODEV;
if (!strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/e500mc"))
num_events = 256;
else if (strcmp(cur_cpu_spec->oprofile_cpu_type, "ppc/e500"))
return -ENODEV;
return register_fsl_emb_pmu(&e500_pmu);
}
early_initcall(init_e500_pmu);