mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 04:34:11 +08:00
5c188d7482
I noticed the PMIC configuration on 37xx-evm won't actually shut down the voltages during off-idle. Turns out 37xx-evm needs the AC charger state transitions disabled like we are doing for SDP and LDP in the legacy booting case. Let's fix this for device tree based booting by setting up the quirk flag based on the compatible flag. And let's also use the existing define for STARTON_CHG. Note that SDP and EVM do not have the PMIC clken wired to gate the the oscillator while LDP has. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
877 lines
26 KiB
C
877 lines
26 KiB
C
/*
|
|
* twl4030.h - header for TWL4030 PM and audio CODEC device
|
|
*
|
|
* Copyright (C) 2005-2006 Texas Instruments, Inc.
|
|
*
|
|
* Based on tlv320aic23.c:
|
|
* Copyright (c) by Kai Svahn <kai.svahn@nokia.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#ifndef __TWL_H_
|
|
#define __TWL_H_
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/input/matrix_keypad.h>
|
|
|
|
/*
|
|
* Using the twl4030 core we address registers using a pair
|
|
* { module id, relative register offset }
|
|
* which that core then maps to the relevant
|
|
* { i2c slave, absolute register address }
|
|
*
|
|
* The module IDs are meaningful only to the twl4030 core code,
|
|
* which uses them as array indices to look up the first register
|
|
* address each module uses within a given i2c slave.
|
|
*/
|
|
|
|
/* Module IDs for similar functionalities found in twl4030/twl6030 */
|
|
enum twl_module_ids {
|
|
TWL_MODULE_USB,
|
|
TWL_MODULE_PIH,
|
|
TWL_MODULE_MAIN_CHARGE,
|
|
TWL_MODULE_PM_MASTER,
|
|
TWL_MODULE_PM_RECEIVER,
|
|
|
|
TWL_MODULE_RTC,
|
|
TWL_MODULE_PWM,
|
|
TWL_MODULE_LED,
|
|
TWL_MODULE_SECURED_REG,
|
|
|
|
TWL_MODULE_LAST,
|
|
};
|
|
|
|
/* Modules only available in twl4030 series */
|
|
enum twl4030_module_ids {
|
|
TWL4030_MODULE_AUDIO_VOICE = TWL_MODULE_LAST,
|
|
TWL4030_MODULE_GPIO,
|
|
TWL4030_MODULE_INTBR,
|
|
TWL4030_MODULE_TEST,
|
|
TWL4030_MODULE_KEYPAD,
|
|
|
|
TWL4030_MODULE_MADC,
|
|
TWL4030_MODULE_INTERRUPTS,
|
|
TWL4030_MODULE_PRECHARGE,
|
|
TWL4030_MODULE_BACKUP,
|
|
TWL4030_MODULE_INT,
|
|
|
|
TWL5031_MODULE_ACCESSORY,
|
|
TWL5031_MODULE_INTERRUPTS,
|
|
|
|
TWL4030_MODULE_LAST,
|
|
};
|
|
|
|
/* Modules only available in twl6030 series */
|
|
enum twl6030_module_ids {
|
|
TWL6030_MODULE_ID0 = TWL_MODULE_LAST,
|
|
TWL6030_MODULE_ID1,
|
|
TWL6030_MODULE_ID2,
|
|
TWL6030_MODULE_GPADC,
|
|
TWL6030_MODULE_GASGAUGE,
|
|
|
|
TWL6030_MODULE_LAST,
|
|
};
|
|
|
|
/* Until the clients has been converted to use TWL_MODULE_LED */
|
|
#define TWL4030_MODULE_LED TWL_MODULE_LED
|
|
|
|
#define GPIO_INTR_OFFSET 0
|
|
#define KEYPAD_INTR_OFFSET 1
|
|
#define BCI_INTR_OFFSET 2
|
|
#define MADC_INTR_OFFSET 3
|
|
#define USB_INTR_OFFSET 4
|
|
#define CHARGERFAULT_INTR_OFFSET 5
|
|
#define BCI_PRES_INTR_OFFSET 9
|
|
#define USB_PRES_INTR_OFFSET 10
|
|
#define RTC_INTR_OFFSET 11
|
|
|
|
/*
|
|
* Offset from TWL6030_IRQ_BASE / pdata->irq_base
|
|
*/
|
|
#define PWR_INTR_OFFSET 0
|
|
#define HOTDIE_INTR_OFFSET 12
|
|
#define SMPSLDO_INTR_OFFSET 13
|
|
#define BATDETECT_INTR_OFFSET 14
|
|
#define SIMDETECT_INTR_OFFSET 15
|
|
#define MMCDETECT_INTR_OFFSET 16
|
|
#define GASGAUGE_INTR_OFFSET 17
|
|
#define USBOTG_INTR_OFFSET 4
|
|
#define CHARGER_INTR_OFFSET 2
|
|
#define RSV_INTR_OFFSET 0
|
|
|
|
/* INT register offsets */
|
|
#define REG_INT_STS_A 0x00
|
|
#define REG_INT_STS_B 0x01
|
|
#define REG_INT_STS_C 0x02
|
|
|
|
#define REG_INT_MSK_LINE_A 0x03
|
|
#define REG_INT_MSK_LINE_B 0x04
|
|
#define REG_INT_MSK_LINE_C 0x05
|
|
|
|
#define REG_INT_MSK_STS_A 0x06
|
|
#define REG_INT_MSK_STS_B 0x07
|
|
#define REG_INT_MSK_STS_C 0x08
|
|
|
|
/* MASK INT REG GROUP A */
|
|
#define TWL6030_PWR_INT_MASK 0x07
|
|
#define TWL6030_RTC_INT_MASK 0x18
|
|
#define TWL6030_HOTDIE_INT_MASK 0x20
|
|
#define TWL6030_SMPSLDOA_INT_MASK 0xC0
|
|
|
|
/* MASK INT REG GROUP B */
|
|
#define TWL6030_SMPSLDOB_INT_MASK 0x01
|
|
#define TWL6030_BATDETECT_INT_MASK 0x02
|
|
#define TWL6030_SIMDETECT_INT_MASK 0x04
|
|
#define TWL6030_MMCDETECT_INT_MASK 0x08
|
|
#define TWL6030_GPADC_INT_MASK 0x60
|
|
#define TWL6030_GASGAUGE_INT_MASK 0x80
|
|
|
|
/* MASK INT REG GROUP C */
|
|
#define TWL6030_USBOTG_INT_MASK 0x0F
|
|
#define TWL6030_CHARGER_CTRL_INT_MASK 0x10
|
|
#define TWL6030_CHARGER_FAULT_INT_MASK 0x60
|
|
|
|
#define TWL6030_MMCCTRL 0xEE
|
|
#define VMMC_AUTO_OFF (0x1 << 3)
|
|
#define SW_FC (0x1 << 2)
|
|
#define STS_MMC 0x1
|
|
|
|
#define TWL6030_CFG_INPUT_PUPD3 0xF2
|
|
#define MMC_PU (0x1 << 3)
|
|
#define MMC_PD (0x1 << 2)
|
|
|
|
#define TWL_SIL_TYPE(rev) ((rev) & 0x00FFFFFF)
|
|
#define TWL_SIL_REV(rev) ((rev) >> 24)
|
|
#define TWL_SIL_5030 0x09002F
|
|
#define TWL5030_REV_1_0 0x00
|
|
#define TWL5030_REV_1_1 0x10
|
|
#define TWL5030_REV_1_2 0x30
|
|
|
|
#define TWL4030_CLASS_ID 0x4030
|
|
#define TWL6030_CLASS_ID 0x6030
|
|
unsigned int twl_rev(void);
|
|
#define GET_TWL_REV (twl_rev())
|
|
#define TWL_CLASS_IS(class, id) \
|
|
static inline int twl_class_is_ ##class(void) \
|
|
{ \
|
|
return ((id) == (GET_TWL_REV)) ? 1 : 0; \
|
|
}
|
|
|
|
TWL_CLASS_IS(4030, TWL4030_CLASS_ID)
|
|
TWL_CLASS_IS(6030, TWL6030_CLASS_ID)
|
|
|
|
/* Set the regcache bypass for the regmap associated with the nodule */
|
|
int twl_set_regcache_bypass(u8 mod_no, bool enable);
|
|
|
|
/*
|
|
* Read and write several 8-bit registers at once.
|
|
*/
|
|
int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
|
|
int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);
|
|
|
|
/*
|
|
* Read and write single 8-bit registers
|
|
*/
|
|
static inline int twl_i2c_write_u8(u8 mod_no, u8 val, u8 reg) {
|
|
return twl_i2c_write(mod_no, &val, reg, 1);
|
|
}
|
|
|
|
static inline int twl_i2c_read_u8(u8 mod_no, u8 *val, u8 reg) {
|
|
return twl_i2c_read(mod_no, val, reg, 1);
|
|
}
|
|
|
|
static inline int twl_i2c_write_u16(u8 mod_no, u16 val, u8 reg) {
|
|
val = cpu_to_le16(val);
|
|
return twl_i2c_write(mod_no, (u8*) &val, reg, 2);
|
|
}
|
|
|
|
static inline int twl_i2c_read_u16(u8 mod_no, u16 *val, u8 reg) {
|
|
int ret;
|
|
ret = twl_i2c_read(mod_no, (u8*) val, reg, 2);
|
|
*val = le16_to_cpu(*val);
|
|
return ret;
|
|
}
|
|
|
|
int twl_get_type(void);
|
|
int twl_get_version(void);
|
|
int twl_get_hfclk_rate(void);
|
|
|
|
int twl6030_interrupt_unmask(u8 bit_mask, u8 offset);
|
|
int twl6030_interrupt_mask(u8 bit_mask, u8 offset);
|
|
|
|
/* Card detect Configuration for MMC1 Controller on OMAP4 */
|
|
#ifdef CONFIG_TWL4030_CORE
|
|
int twl6030_mmc_card_detect_config(void);
|
|
#else
|
|
static inline int twl6030_mmc_card_detect_config(void)
|
|
{
|
|
pr_debug("twl6030_mmc_card_detect_config not supported\n");
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/* MMC1 Controller on OMAP4 uses Phoenix irq for Card detect */
|
|
#ifdef CONFIG_TWL4030_CORE
|
|
int twl6030_mmc_card_detect(struct device *dev, int slot);
|
|
#else
|
|
static inline int twl6030_mmc_card_detect(struct device *dev, int slot)
|
|
{
|
|
pr_debug("Call back twl6030_mmc_card_detect not supported\n");
|
|
return -EIO;
|
|
}
|
|
#endif
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* NOTE: at up to 1024 registers, this is a big chip.
|
|
*
|
|
* Avoid putting register declarations in this file, instead of into
|
|
* a driver-private file, unless some of the registers in a block
|
|
* need to be shared with other drivers. One example is blocks that
|
|
* have Secondary IRQ Handler (SIH) registers.
|
|
*/
|
|
|
|
#define TWL4030_SIH_CTRL_EXCLEN_MASK BIT(0)
|
|
#define TWL4030_SIH_CTRL_PENDDIS_MASK BIT(1)
|
|
#define TWL4030_SIH_CTRL_COR_MASK BIT(2)
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* GPIO Block Register offsets (use TWL4030_MODULE_GPIO)
|
|
*/
|
|
|
|
#define REG_GPIODATAIN1 0x0
|
|
#define REG_GPIODATAIN2 0x1
|
|
#define REG_GPIODATAIN3 0x2
|
|
#define REG_GPIODATADIR1 0x3
|
|
#define REG_GPIODATADIR2 0x4
|
|
#define REG_GPIODATADIR3 0x5
|
|
#define REG_GPIODATAOUT1 0x6
|
|
#define REG_GPIODATAOUT2 0x7
|
|
#define REG_GPIODATAOUT3 0x8
|
|
#define REG_CLEARGPIODATAOUT1 0x9
|
|
#define REG_CLEARGPIODATAOUT2 0xA
|
|
#define REG_CLEARGPIODATAOUT3 0xB
|
|
#define REG_SETGPIODATAOUT1 0xC
|
|
#define REG_SETGPIODATAOUT2 0xD
|
|
#define REG_SETGPIODATAOUT3 0xE
|
|
#define REG_GPIO_DEBEN1 0xF
|
|
#define REG_GPIO_DEBEN2 0x10
|
|
#define REG_GPIO_DEBEN3 0x11
|
|
#define REG_GPIO_CTRL 0x12
|
|
#define REG_GPIOPUPDCTR1 0x13
|
|
#define REG_GPIOPUPDCTR2 0x14
|
|
#define REG_GPIOPUPDCTR3 0x15
|
|
#define REG_GPIOPUPDCTR4 0x16
|
|
#define REG_GPIOPUPDCTR5 0x17
|
|
#define REG_GPIO_ISR1A 0x19
|
|
#define REG_GPIO_ISR2A 0x1A
|
|
#define REG_GPIO_ISR3A 0x1B
|
|
#define REG_GPIO_IMR1A 0x1C
|
|
#define REG_GPIO_IMR2A 0x1D
|
|
#define REG_GPIO_IMR3A 0x1E
|
|
#define REG_GPIO_ISR1B 0x1F
|
|
#define REG_GPIO_ISR2B 0x20
|
|
#define REG_GPIO_ISR3B 0x21
|
|
#define REG_GPIO_IMR1B 0x22
|
|
#define REG_GPIO_IMR2B 0x23
|
|
#define REG_GPIO_IMR3B 0x24
|
|
#define REG_GPIO_EDR1 0x28
|
|
#define REG_GPIO_EDR2 0x29
|
|
#define REG_GPIO_EDR3 0x2A
|
|
#define REG_GPIO_EDR4 0x2B
|
|
#define REG_GPIO_EDR5 0x2C
|
|
#define REG_GPIO_SIH_CTRL 0x2D
|
|
|
|
/* Up to 18 signals are available as GPIOs, when their
|
|
* pins are not assigned to another use (such as ULPI/USB).
|
|
*/
|
|
#define TWL4030_GPIO_MAX 18
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
/*Interface Bit Register (INTBR) offsets
|
|
*(Use TWL_4030_MODULE_INTBR)
|
|
*/
|
|
|
|
#define REG_IDCODE_7_0 0x00
|
|
#define REG_IDCODE_15_8 0x01
|
|
#define REG_IDCODE_16_23 0x02
|
|
#define REG_IDCODE_31_24 0x03
|
|
#define REG_GPPUPDCTR1 0x0F
|
|
#define REG_UNLOCK_TEST_REG 0x12
|
|
|
|
/*I2C1 and I2C4(SR) SDA/SCL pull-up control bits */
|
|
|
|
#define I2C_SCL_CTRL_PU BIT(0)
|
|
#define I2C_SDA_CTRL_PU BIT(2)
|
|
#define SR_I2C_SCL_CTRL_PU BIT(4)
|
|
#define SR_I2C_SDA_CTRL_PU BIT(6)
|
|
|
|
#define TWL_EEPROM_R_UNLOCK 0x49
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* Keypad register offsets (use TWL4030_MODULE_KEYPAD)
|
|
* ... SIH/interrupt only
|
|
*/
|
|
|
|
#define TWL4030_KEYPAD_KEYP_ISR1 0x11
|
|
#define TWL4030_KEYPAD_KEYP_IMR1 0x12
|
|
#define TWL4030_KEYPAD_KEYP_ISR2 0x13
|
|
#define TWL4030_KEYPAD_KEYP_IMR2 0x14
|
|
#define TWL4030_KEYPAD_KEYP_SIR 0x15 /* test register */
|
|
#define TWL4030_KEYPAD_KEYP_EDR 0x16
|
|
#define TWL4030_KEYPAD_KEYP_SIH_CTRL 0x17
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* Multichannel ADC register offsets (use TWL4030_MODULE_MADC)
|
|
* ... SIH/interrupt only
|
|
*/
|
|
|
|
#define TWL4030_MADC_ISR1 0x61
|
|
#define TWL4030_MADC_IMR1 0x62
|
|
#define TWL4030_MADC_ISR2 0x63
|
|
#define TWL4030_MADC_IMR2 0x64
|
|
#define TWL4030_MADC_SIR 0x65 /* test register */
|
|
#define TWL4030_MADC_EDR 0x66
|
|
#define TWL4030_MADC_SIH_CTRL 0x67
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* Battery charger register offsets (use TWL4030_MODULE_INTERRUPTS)
|
|
*/
|
|
|
|
#define TWL4030_INTERRUPTS_BCIISR1A 0x0
|
|
#define TWL4030_INTERRUPTS_BCIISR2A 0x1
|
|
#define TWL4030_INTERRUPTS_BCIIMR1A 0x2
|
|
#define TWL4030_INTERRUPTS_BCIIMR2A 0x3
|
|
#define TWL4030_INTERRUPTS_BCIISR1B 0x4
|
|
#define TWL4030_INTERRUPTS_BCIISR2B 0x5
|
|
#define TWL4030_INTERRUPTS_BCIIMR1B 0x6
|
|
#define TWL4030_INTERRUPTS_BCIIMR2B 0x7
|
|
#define TWL4030_INTERRUPTS_BCISIR1 0x8 /* test register */
|
|
#define TWL4030_INTERRUPTS_BCISIR2 0x9 /* test register */
|
|
#define TWL4030_INTERRUPTS_BCIEDR1 0xa
|
|
#define TWL4030_INTERRUPTS_BCIEDR2 0xb
|
|
#define TWL4030_INTERRUPTS_BCIEDR3 0xc
|
|
#define TWL4030_INTERRUPTS_BCISIHCTRL 0xd
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* Power Interrupt block register offsets (use TWL4030_MODULE_INT)
|
|
*/
|
|
|
|
#define TWL4030_INT_PWR_ISR1 0x0
|
|
#define TWL4030_INT_PWR_IMR1 0x1
|
|
#define TWL4030_INT_PWR_ISR2 0x2
|
|
#define TWL4030_INT_PWR_IMR2 0x3
|
|
#define TWL4030_INT_PWR_SIR 0x4 /* test register */
|
|
#define TWL4030_INT_PWR_EDR1 0x5
|
|
#define TWL4030_INT_PWR_EDR2 0x6
|
|
#define TWL4030_INT_PWR_SIH_CTRL 0x7
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* Accessory Interrupts
|
|
*/
|
|
#define TWL5031_ACIIMR_LSB 0x05
|
|
#define TWL5031_ACIIMR_MSB 0x06
|
|
#define TWL5031_ACIIDR_LSB 0x07
|
|
#define TWL5031_ACIIDR_MSB 0x08
|
|
#define TWL5031_ACCISR1 0x0F
|
|
#define TWL5031_ACCIMR1 0x10
|
|
#define TWL5031_ACCISR2 0x11
|
|
#define TWL5031_ACCIMR2 0x12
|
|
#define TWL5031_ACCSIR 0x13
|
|
#define TWL5031_ACCEDR1 0x14
|
|
#define TWL5031_ACCSIHCTRL 0x15
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* Battery Charger Controller
|
|
*/
|
|
|
|
#define TWL5031_INTERRUPTS_BCIISR1 0x0
|
|
#define TWL5031_INTERRUPTS_BCIIMR1 0x1
|
|
#define TWL5031_INTERRUPTS_BCIISR2 0x2
|
|
#define TWL5031_INTERRUPTS_BCIIMR2 0x3
|
|
#define TWL5031_INTERRUPTS_BCISIR 0x4
|
|
#define TWL5031_INTERRUPTS_BCIEDR1 0x5
|
|
#define TWL5031_INTERRUPTS_BCIEDR2 0x6
|
|
#define TWL5031_INTERRUPTS_BCISIHCTRL 0x7
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* PM Master module register offsets (use TWL4030_MODULE_PM_MASTER)
|
|
*/
|
|
|
|
#define TWL4030_PM_MASTER_CFG_P1_TRANSITION 0x00
|
|
#define TWL4030_PM_MASTER_CFG_P2_TRANSITION 0x01
|
|
#define TWL4030_PM_MASTER_CFG_P3_TRANSITION 0x02
|
|
#define TWL4030_PM_MASTER_CFG_P123_TRANSITION 0x03
|
|
#define TWL4030_PM_MASTER_STS_BOOT 0x04
|
|
#define TWL4030_PM_MASTER_CFG_BOOT 0x05
|
|
#define TWL4030_PM_MASTER_SHUNDAN 0x06
|
|
#define TWL4030_PM_MASTER_BOOT_BCI 0x07
|
|
#define TWL4030_PM_MASTER_CFG_PWRANA1 0x08
|
|
#define TWL4030_PM_MASTER_CFG_PWRANA2 0x09
|
|
#define TWL4030_PM_MASTER_BACKUP_MISC_STS 0x0b
|
|
#define TWL4030_PM_MASTER_BACKUP_MISC_CFG 0x0c
|
|
#define TWL4030_PM_MASTER_BACKUP_MISC_TST 0x0d
|
|
#define TWL4030_PM_MASTER_PROTECT_KEY 0x0e
|
|
#define TWL4030_PM_MASTER_STS_HW_CONDITIONS 0x0f
|
|
#define TWL4030_PM_MASTER_P1_SW_EVENTS 0x10
|
|
#define TWL4030_PM_MASTER_P2_SW_EVENTS 0x11
|
|
#define TWL4030_PM_MASTER_P3_SW_EVENTS 0x12
|
|
#define TWL4030_PM_MASTER_STS_P123_STATE 0x13
|
|
#define TWL4030_PM_MASTER_PB_CFG 0x14
|
|
#define TWL4030_PM_MASTER_PB_WORD_MSB 0x15
|
|
#define TWL4030_PM_MASTER_PB_WORD_LSB 0x16
|
|
#define TWL4030_PM_MASTER_SEQ_ADD_W2P 0x1c
|
|
#define TWL4030_PM_MASTER_SEQ_ADD_P2A 0x1d
|
|
#define TWL4030_PM_MASTER_SEQ_ADD_A2W 0x1e
|
|
#define TWL4030_PM_MASTER_SEQ_ADD_A2S 0x1f
|
|
#define TWL4030_PM_MASTER_SEQ_ADD_S2A12 0x20
|
|
#define TWL4030_PM_MASTER_SEQ_ADD_S2A3 0x21
|
|
#define TWL4030_PM_MASTER_SEQ_ADD_WARM 0x22
|
|
#define TWL4030_PM_MASTER_MEMORY_ADDRESS 0x23
|
|
#define TWL4030_PM_MASTER_MEMORY_DATA 0x24
|
|
|
|
#define TWL4030_PM_MASTER_KEY_CFG1 0xc0
|
|
#define TWL4030_PM_MASTER_KEY_CFG2 0x0c
|
|
|
|
#define TWL4030_PM_MASTER_KEY_TST1 0xe0
|
|
#define TWL4030_PM_MASTER_KEY_TST2 0x0e
|
|
|
|
#define TWL4030_PM_MASTER_GLOBAL_TST 0xb6
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
/* Power bus message definitions */
|
|
|
|
/* The TWL4030/5030 splits its power-management resources (the various
|
|
* regulators, clock and reset lines) into 3 processor groups - P1, P2 and
|
|
* P3. These groups can then be configured to transition between sleep, wait-on
|
|
* and active states by sending messages to the power bus. See Section 5.4.2
|
|
* Power Resources of TWL4030 TRM
|
|
*/
|
|
|
|
/* Processor groups */
|
|
#define DEV_GRP_NULL 0x0
|
|
#define DEV_GRP_P1 0x1 /* P1: all OMAP devices */
|
|
#define DEV_GRP_P2 0x2 /* P2: all Modem devices */
|
|
#define DEV_GRP_P3 0x4 /* P3: all peripheral devices */
|
|
|
|
/* Resource groups */
|
|
#define RES_GRP_RES 0x0 /* Reserved */
|
|
#define RES_GRP_PP 0x1 /* Power providers */
|
|
#define RES_GRP_RC 0x2 /* Reset and control */
|
|
#define RES_GRP_PP_RC 0x3
|
|
#define RES_GRP_PR 0x4 /* Power references */
|
|
#define RES_GRP_PP_PR 0x5
|
|
#define RES_GRP_RC_PR 0x6
|
|
#define RES_GRP_ALL 0x7 /* All resource groups */
|
|
|
|
#define RES_TYPE2_R0 0x0
|
|
#define RES_TYPE2_R1 0x1
|
|
#define RES_TYPE2_R2 0x2
|
|
|
|
#define RES_TYPE_R0 0x0
|
|
#define RES_TYPE_ALL 0x7
|
|
|
|
/* Resource states */
|
|
#define RES_STATE_WRST 0xF
|
|
#define RES_STATE_ACTIVE 0xE
|
|
#define RES_STATE_SLEEP 0x8
|
|
#define RES_STATE_OFF 0x0
|
|
|
|
/* Power resources */
|
|
|
|
/* Power providers */
|
|
#define RES_VAUX1 1
|
|
#define RES_VAUX2 2
|
|
#define RES_VAUX3 3
|
|
#define RES_VAUX4 4
|
|
#define RES_VMMC1 5
|
|
#define RES_VMMC2 6
|
|
#define RES_VPLL1 7
|
|
#define RES_VPLL2 8
|
|
#define RES_VSIM 9
|
|
#define RES_VDAC 10
|
|
#define RES_VINTANA1 11
|
|
#define RES_VINTANA2 12
|
|
#define RES_VINTDIG 13
|
|
#define RES_VIO 14
|
|
#define RES_VDD1 15
|
|
#define RES_VDD2 16
|
|
#define RES_VUSB_1V5 17
|
|
#define RES_VUSB_1V8 18
|
|
#define RES_VUSB_3V1 19
|
|
#define RES_VUSBCP 20
|
|
#define RES_REGEN 21
|
|
/* Reset and control */
|
|
#define RES_NRES_PWRON 22
|
|
#define RES_CLKEN 23
|
|
#define RES_SYSEN 24
|
|
#define RES_HFCLKOUT 25
|
|
#define RES_32KCLKOUT 26
|
|
#define RES_RESET 27
|
|
/* Power Reference */
|
|
#define RES_MAIN_REF 28
|
|
|
|
#define TOTAL_RESOURCES 28
|
|
/*
|
|
* Power Bus Message Format ... these can be sent individually by Linux,
|
|
* but are usually part of downloaded scripts that are run when various
|
|
* power events are triggered.
|
|
*
|
|
* Broadcast Message (16 Bits):
|
|
* DEV_GRP[15:13] MT[12] RES_GRP[11:9] RES_TYPE2[8:7] RES_TYPE[6:4]
|
|
* RES_STATE[3:0]
|
|
*
|
|
* Singular Message (16 Bits):
|
|
* DEV_GRP[15:13] MT[12] RES_ID[11:4] RES_STATE[3:0]
|
|
*/
|
|
|
|
#define MSG_BROADCAST(devgrp, grp, type, type2, state) \
|
|
( (devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \
|
|
| (type) << 4 | (state))
|
|
|
|
#define MSG_SINGULAR(devgrp, id, state) \
|
|
((devgrp) << 13 | 0 << 12 | (id) << 4 | (state))
|
|
|
|
#define MSG_BROADCAST_ALL(devgrp, state) \
|
|
((devgrp) << 5 | (state))
|
|
|
|
#define MSG_BROADCAST_REF MSG_BROADCAST_ALL
|
|
#define MSG_BROADCAST_PROV MSG_BROADCAST_ALL
|
|
#define MSG_BROADCAST__CLK_RST MSG_BROADCAST_ALL
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
struct twl4030_clock_init_data {
|
|
bool ck32k_lowpwr_enable;
|
|
};
|
|
|
|
struct twl4030_bci_platform_data {
|
|
int *battery_tmp_tbl;
|
|
unsigned int tblsize;
|
|
int bb_uvolt; /* voltage to charge backup battery */
|
|
int bb_uamp; /* current for backup battery charging */
|
|
};
|
|
|
|
/* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */
|
|
struct twl4030_gpio_platform_data {
|
|
/* package the two LED signals as output-only GPIOs? */
|
|
bool use_leds;
|
|
|
|
/* gpio-n should control VMMC(n+1) if BIT(n) in mmc_cd is set */
|
|
u8 mmc_cd;
|
|
|
|
/* if BIT(N) is set, or VMMC(n+1) is linked, debounce GPIO-N */
|
|
u32 debounce;
|
|
|
|
/* For gpio-N, bit (1 << N) in "pullups" is set if that pullup
|
|
* should be enabled. Else, if that bit is set in "pulldowns",
|
|
* that pulldown is enabled. Don't waste power by letting any
|
|
* digital inputs float...
|
|
*/
|
|
u32 pullups;
|
|
u32 pulldowns;
|
|
|
|
int (*setup)(struct device *dev,
|
|
unsigned gpio, unsigned ngpio);
|
|
int (*teardown)(struct device *dev,
|
|
unsigned gpio, unsigned ngpio);
|
|
};
|
|
|
|
struct twl4030_madc_platform_data {
|
|
int irq_line;
|
|
};
|
|
|
|
/* Boards have unique mappings of {row, col} --> keycode.
|
|
* Column and row are 8 bits each, but range only from 0..7.
|
|
* a PERSISTENT_KEY is "always on" and never reported.
|
|
*/
|
|
#define PERSISTENT_KEY(r, c) KEY((r), (c), KEY_RESERVED)
|
|
|
|
struct twl4030_keypad_data {
|
|
const struct matrix_keymap_data *keymap_data;
|
|
unsigned rows;
|
|
unsigned cols;
|
|
bool rep;
|
|
};
|
|
|
|
enum twl4030_usb_mode {
|
|
T2_USB_MODE_ULPI = 1,
|
|
T2_USB_MODE_CEA2011_3PIN = 2,
|
|
};
|
|
|
|
struct twl4030_usb_data {
|
|
enum twl4030_usb_mode usb_mode;
|
|
unsigned long features;
|
|
|
|
int (*phy_init)(struct device *dev);
|
|
int (*phy_exit)(struct device *dev);
|
|
/* Power on/off the PHY */
|
|
int (*phy_power)(struct device *dev, int iD, int on);
|
|
/* enable/disable phy clocks */
|
|
int (*phy_set_clock)(struct device *dev, int on);
|
|
/* suspend/resume of phy */
|
|
int (*phy_suspend)(struct device *dev, int suspend);
|
|
};
|
|
|
|
struct twl4030_ins {
|
|
u16 pmb_message;
|
|
u8 delay;
|
|
};
|
|
|
|
struct twl4030_script {
|
|
struct twl4030_ins *script;
|
|
unsigned size;
|
|
u8 flags;
|
|
#define TWL4030_WRST_SCRIPT (1<<0)
|
|
#define TWL4030_WAKEUP12_SCRIPT (1<<1)
|
|
#define TWL4030_WAKEUP3_SCRIPT (1<<2)
|
|
#define TWL4030_SLEEP_SCRIPT (1<<3)
|
|
};
|
|
|
|
struct twl4030_resconfig {
|
|
u8 resource;
|
|
u8 devgroup; /* Processor group that Power resource belongs to */
|
|
u8 type; /* Power resource addressed, 6 / broadcast message */
|
|
u8 type2; /* Power resource addressed, 3 / broadcast message */
|
|
u8 remap_off; /* off state remapping */
|
|
u8 remap_sleep; /* sleep state remapping */
|
|
};
|
|
|
|
struct twl4030_power_data {
|
|
struct twl4030_script **scripts;
|
|
unsigned num;
|
|
struct twl4030_resconfig *resource_config;
|
|
struct twl4030_resconfig *board_config;
|
|
#define TWL4030_RESCONFIG_UNDEF ((u8)-1)
|
|
bool use_poweroff; /* Board is wired for TWL poweroff */
|
|
bool ac_charger_quirk; /* Disable AC charger on board */
|
|
};
|
|
|
|
extern int twl4030_remove_script(u8 flags);
|
|
extern void twl4030_power_off(void);
|
|
|
|
struct twl4030_codec_data {
|
|
unsigned int digimic_delay; /* in ms */
|
|
unsigned int ramp_delay_value;
|
|
unsigned int offset_cncl_path;
|
|
unsigned int hs_extmute:1;
|
|
int hs_extmute_gpio;
|
|
};
|
|
|
|
struct twl4030_vibra_data {
|
|
unsigned int coexist;
|
|
};
|
|
|
|
struct twl4030_audio_data {
|
|
unsigned int audio_mclk;
|
|
struct twl4030_codec_data *codec;
|
|
struct twl4030_vibra_data *vibra;
|
|
|
|
/* twl6040 */
|
|
int audpwron_gpio; /* audio power-on gpio */
|
|
int naudint_irq; /* audio interrupt */
|
|
unsigned int irq_base;
|
|
};
|
|
|
|
struct twl4030_platform_data {
|
|
struct twl4030_clock_init_data *clock;
|
|
struct twl4030_bci_platform_data *bci;
|
|
struct twl4030_gpio_platform_data *gpio;
|
|
struct twl4030_madc_platform_data *madc;
|
|
struct twl4030_keypad_data *keypad;
|
|
struct twl4030_usb_data *usb;
|
|
struct twl4030_power_data *power;
|
|
struct twl4030_audio_data *audio;
|
|
|
|
/* Common LDO regulators for TWL4030/TWL6030 */
|
|
struct regulator_init_data *vdac;
|
|
struct regulator_init_data *vaux1;
|
|
struct regulator_init_data *vaux2;
|
|
struct regulator_init_data *vaux3;
|
|
struct regulator_init_data *vdd1;
|
|
struct regulator_init_data *vdd2;
|
|
struct regulator_init_data *vdd3;
|
|
/* TWL4030 LDO regulators */
|
|
struct regulator_init_data *vpll1;
|
|
struct regulator_init_data *vpll2;
|
|
struct regulator_init_data *vmmc1;
|
|
struct regulator_init_data *vmmc2;
|
|
struct regulator_init_data *vsim;
|
|
struct regulator_init_data *vaux4;
|
|
struct regulator_init_data *vio;
|
|
struct regulator_init_data *vintana1;
|
|
struct regulator_init_data *vintana2;
|
|
struct regulator_init_data *vintdig;
|
|
/* TWL6030 LDO regulators */
|
|
struct regulator_init_data *vmmc;
|
|
struct regulator_init_data *vpp;
|
|
struct regulator_init_data *vusim;
|
|
struct regulator_init_data *vana;
|
|
struct regulator_init_data *vcxio;
|
|
struct regulator_init_data *vusb;
|
|
struct regulator_init_data *clk32kg;
|
|
struct regulator_init_data *v1v8;
|
|
struct regulator_init_data *v2v1;
|
|
/* TWL6032 LDO regulators */
|
|
struct regulator_init_data *ldo1;
|
|
struct regulator_init_data *ldo2;
|
|
struct regulator_init_data *ldo3;
|
|
struct regulator_init_data *ldo4;
|
|
struct regulator_init_data *ldo5;
|
|
struct regulator_init_data *ldo6;
|
|
struct regulator_init_data *ldo7;
|
|
struct regulator_init_data *ldoln;
|
|
struct regulator_init_data *ldousb;
|
|
/* TWL6032 DCDC regulators */
|
|
struct regulator_init_data *smps3;
|
|
struct regulator_init_data *smps4;
|
|
struct regulator_init_data *vio6025;
|
|
};
|
|
|
|
struct twl_regulator_driver_data {
|
|
int (*set_voltage)(void *data, int target_uV);
|
|
int (*get_voltage)(void *data);
|
|
void *data;
|
|
unsigned long features;
|
|
};
|
|
/* chip-specific feature flags, for twl_regulator_driver_data.features */
|
|
#define TWL4030_VAUX2 BIT(0) /* pre-5030 voltage ranges */
|
|
#define TPS_SUBSET BIT(1) /* tps659[23]0 have fewer LDOs */
|
|
#define TWL5031 BIT(2) /* twl5031 has different registers */
|
|
#define TWL6030_CLASS BIT(3) /* TWL6030 class */
|
|
#define TWL6032_SUBCLASS BIT(4) /* TWL6032 has changed registers */
|
|
#define TWL4030_ALLOW_UNSUPPORTED BIT(5) /* Some voltages are possible
|
|
* but not officially supported.
|
|
* This flag is necessary to
|
|
* enable them.
|
|
*/
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
int twl4030_sih_setup(struct device *dev, int module, int irq_base);
|
|
|
|
/* Offsets to Power Registers */
|
|
#define TWL4030_VDAC_DEV_GRP 0x3B
|
|
#define TWL4030_VDAC_DEDICATED 0x3E
|
|
#define TWL4030_VAUX1_DEV_GRP 0x17
|
|
#define TWL4030_VAUX1_DEDICATED 0x1A
|
|
#define TWL4030_VAUX2_DEV_GRP 0x1B
|
|
#define TWL4030_VAUX2_DEDICATED 0x1E
|
|
#define TWL4030_VAUX3_DEV_GRP 0x1F
|
|
#define TWL4030_VAUX3_DEDICATED 0x22
|
|
|
|
static inline int twl4030charger_usb_en(int enable) { return 0; }
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
/* Linux-specific regulator identifiers ... for now, we only support
|
|
* the LDOs, and leave the three buck converters alone. VDD1 and VDD2
|
|
* need to tie into hardware based voltage scaling (cpufreq etc), while
|
|
* VIO is generally fixed.
|
|
*/
|
|
|
|
/* TWL4030 SMPS/LDO's */
|
|
/* EXTERNAL dc-to-dc buck converters */
|
|
#define TWL4030_REG_VDD1 0
|
|
#define TWL4030_REG_VDD2 1
|
|
#define TWL4030_REG_VIO 2
|
|
|
|
/* EXTERNAL LDOs */
|
|
#define TWL4030_REG_VDAC 3
|
|
#define TWL4030_REG_VPLL1 4
|
|
#define TWL4030_REG_VPLL2 5 /* not on all chips */
|
|
#define TWL4030_REG_VMMC1 6
|
|
#define TWL4030_REG_VMMC2 7 /* not on all chips */
|
|
#define TWL4030_REG_VSIM 8 /* not on all chips */
|
|
#define TWL4030_REG_VAUX1 9 /* not on all chips */
|
|
#define TWL4030_REG_VAUX2_4030 10 /* (twl4030-specific) */
|
|
#define TWL4030_REG_VAUX2 11 /* (twl5030 and newer) */
|
|
#define TWL4030_REG_VAUX3 12 /* not on all chips */
|
|
#define TWL4030_REG_VAUX4 13 /* not on all chips */
|
|
|
|
/* INTERNAL LDOs */
|
|
#define TWL4030_REG_VINTANA1 14
|
|
#define TWL4030_REG_VINTANA2 15
|
|
#define TWL4030_REG_VINTDIG 16
|
|
#define TWL4030_REG_VUSB1V5 17
|
|
#define TWL4030_REG_VUSB1V8 18
|
|
#define TWL4030_REG_VUSB3V1 19
|
|
|
|
/* TWL6030 SMPS/LDO's */
|
|
/* EXTERNAL dc-to-dc buck convertor controllable via SR */
|
|
#define TWL6030_REG_VDD1 30
|
|
#define TWL6030_REG_VDD2 31
|
|
#define TWL6030_REG_VDD3 32
|
|
|
|
/* Non SR compliant dc-to-dc buck convertors */
|
|
#define TWL6030_REG_VMEM 33
|
|
#define TWL6030_REG_V2V1 34
|
|
#define TWL6030_REG_V1V29 35
|
|
#define TWL6030_REG_V1V8 36
|
|
|
|
/* EXTERNAL LDOs */
|
|
#define TWL6030_REG_VAUX1_6030 37
|
|
#define TWL6030_REG_VAUX2_6030 38
|
|
#define TWL6030_REG_VAUX3_6030 39
|
|
#define TWL6030_REG_VMMC 40
|
|
#define TWL6030_REG_VPP 41
|
|
#define TWL6030_REG_VUSIM 42
|
|
#define TWL6030_REG_VANA 43
|
|
#define TWL6030_REG_VCXIO 44
|
|
#define TWL6030_REG_VDAC 45
|
|
#define TWL6030_REG_VUSB 46
|
|
|
|
/* INTERNAL LDOs */
|
|
#define TWL6030_REG_VRTC 47
|
|
#define TWL6030_REG_CLK32KG 48
|
|
|
|
/* LDOs on 6025 have different names */
|
|
#define TWL6032_REG_LDO2 49
|
|
#define TWL6032_REG_LDO4 50
|
|
#define TWL6032_REG_LDO3 51
|
|
#define TWL6032_REG_LDO5 52
|
|
#define TWL6032_REG_LDO1 53
|
|
#define TWL6032_REG_LDO7 54
|
|
#define TWL6032_REG_LDO6 55
|
|
#define TWL6032_REG_LDOLN 56
|
|
#define TWL6032_REG_LDOUSB 57
|
|
|
|
/* 6025 DCDC supplies */
|
|
#define TWL6032_REG_SMPS3 58
|
|
#define TWL6032_REG_SMPS4 59
|
|
#define TWL6032_REG_VIO 60
|
|
|
|
|
|
#endif /* End of __TWL4030_H */
|