mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-21 11:44:01 +08:00
b630a23a73
kernel cycle: Core: - The pin control Kconfig entry PINCTRL is now turned into a menuconfig option. This obviously has the implication of making the subsystem menu visible in menuconfig. This is happening because of two things: - Intel have started to deploy and depend on pin controllers in a way that is affecting users directly. This happens on the highly integrated laptop chipsets named after geographical places: baytrail, broxton, cannonlake, cedarfork, cherryview, denverton, geminilake, lewisburg, merrifield, sunrisepoint... It started a while back and now it is ever more evident that this is crucial infrastructure for x86 laptops and not an embedded obscurity anymore. Users need to be aware. - Pin control expanders on I2C and SPI that are arch-agnostic. Currently Semtech SX150X and Microchip MCP28x08 but more are expected. Users will have to be able to configure these in directly for their set-up. - Just go and select GPIOLIB now that we made sure that GPIOLIB is a very vanilla subsystem. Do not depend on it, if we need it, select it. - Exposing the pin control subsystem in menuconfig uncovered a bunch of obscure bugs that are now hopefully fixed, all more or less pertaining to Blackfin. - Unified namespace for cross-calls between pin control and GPIO. - New support for clock skew/delay generic DT bindings and generic pin config options for this. - Minor documentation improvements. Various: - The Renesas SH-PFC pin controller has evolved a lot. It seems Renesas are churning out new SoCs by the minute. - A bunch of non-critical fixes for the Rockchip driver. - Improve the use of library functions instead of open coding. - Support the MCP28018 variant in the MCP28x08 driver. - Static constifying. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJaDV9TAAoJEEEQszewGV1zf0AQAIlHxM8B0mJPOFv7WdPIHs8j GSGAPv0rPobdgZI8vegosIQmAiry5jjaHP6VGOrK5n8FRxfBLd89NLT7dgK7J9Yx tYcQRQn1/MqZKaIjWWgTes3okEr9s77Of3aWkA9gyvBjTGoo2hu8BTwZOYuPrIPP aYcI7VR0VbTe7FQR1QRtKBXnBTXfznF1j5ckKNY4ahgIPcUgxyh6EA1E61rDorLK gvwwzoBqIKQAcnapgarF7YOJjoE0i7ZoSlhL0b0nvhcgolyK/zLN4xujLcTGPeTJ hQwe7LhxtvtmJmu0jRMuetDLFT52d6eq8ttyFBMULkgRzcgMv6GZZXUy4k92t7ZT F2DRbAjyAlxkhUhQ8BORzEXwfWYITt1M49jWQqugdDR2fV/MAlF8motOkVBl73iS zHIQ/ZDcAD+PlwTHiDyDOUxj7qyDs2MkTLTzfXc0koOQZOqskDHQ1dIf3UzLzZ9S /dx339/ejwP73E0lzOsanhianfonqWZ3Apn3aRG18uqCt2+eHySWpxyRANuOlBZI czERg+47wDfng24xyuH0EElgbS5G0Bt1lT5zLVLdFEvoLmcBHVKqaCkiuvYXOjVM GyMRvQPiJbhT6qiJ+aSP8t/utl1aUhXQLtrUnXxu8qv9tQ6jgmqiQd9855Uvrzb0 ZR2wyNc2jtWzwCfrkWjt =kj/b -----END PGP SIGNATURE----- Merge tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for the v4.15 kernel cycle: Core: - The pin control Kconfig entry PINCTRL is now turned into a menuconfig option. This obviously has the implication of making the subsystem menu visible in menuconfig. This is happening because of two things: (a) Intel have started to deploy and depend on pin controllers in a way that is affecting users directly. This happens on the highly integrated laptop chipsets named after geographical places: baytrail, broxton, cannonlake, cedarfork, cherryview, denverton, geminilake, lewisburg, merrifield, sunrisepoint... It started a while back and now it is ever more evident that this is crucial infrastructure for x86 laptops and not an embedded obscurity anymore. Users need to be aware. (b) Pin control expanders on I2C and SPI that are arch-agnostic. Currently Semtech SX150X and Microchip MCP28x08 but more are expected. Users will have to be able to configure these in directly for their set-up. - Just go and select GPIOLIB now that we made sure that GPIOLIB is a very vanilla subsystem. Do not depend on it, if we need it, select it. - Exposing the pin control subsystem in menuconfig uncovered a bunch of obscure bugs that are now hopefully fixed, all more or less pertaining to Blackfin. - Unified namespace for cross-calls between pin control and GPIO. - New support for clock skew/delay generic DT bindings and generic pin config options for this. - Minor documentation improvements. Various: - The Renesas SH-PFC pin controller has evolved a lot. It seems Renesas are churning out new SoCs by the minute. - A bunch of non-critical fixes for the Rockchip driver. - Improve the use of library functions instead of open coding. - Support the MCP28018 variant in the MCP28x08 driver. - Static constifying" * tag 'pinctrl-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (91 commits) pinctrl: gemini: Fix missing pad descriptions pinctrl: Add some depends on HAS_IOMEM pinctrl: samsung/s3c24xx: add CONFIG_OF dependency pinctrl: gemini: Fix GMAC groups pinctrl: qcom: spmi-gpio: Add pmi8994 gpio support pinctrl: ti-iodelay: remove redundant unused variable dev pinctrl: max77620: Use common error handling code in max77620_pinconf_set() pinctrl: gemini: Implement clock skew/delay config pinctrl: gemini: Use generic DT parser pinctrl: Add skew-delay pin config and bindings pinctrl: armada-37xx: Add edge both type gpio irq support pinctrl: uniphier: remove eMMC hardware reset pin-mux pinctrl: rockchip: Add iomux-route switching support for rk3288 pinctrl: intel: Add Intel Cedar Fork PCH pin controller support pinctrl: intel: Make offset to interrupt status register configurable pinctrl: sunxi: Enforce the strict mode by default pinctrl: sunxi: Disable strict mode for old pinctrl drivers pinctrl: sunxi: Introduce the strict flag pinctrl: sh-pfc: Save/restore registers for PSCI system suspend pinctrl: sh-pfc: r8a7796: Use generic IOCTRL register description ...
1205 lines
29 KiB
C
1205 lines
29 KiB
C
/* MCP23S08 SPI/I2C GPIO driver */
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/device.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/module.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/mcp23s08.h>
|
|
#include <linux/slab.h>
|
|
#include <asm/byteorder.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
#include <linux/pinctrl/pinconf.h>
|
|
#include <linux/pinctrl/pinconf-generic.h>
|
|
|
|
/*
|
|
* MCP types supported by driver
|
|
*/
|
|
#define MCP_TYPE_S08 0
|
|
#define MCP_TYPE_S17 1
|
|
#define MCP_TYPE_008 2
|
|
#define MCP_TYPE_017 3
|
|
#define MCP_TYPE_S18 4
|
|
#define MCP_TYPE_018 5
|
|
|
|
#define MCP_MAX_DEV_PER_CS 8
|
|
|
|
/* Registers are all 8 bits wide.
|
|
*
|
|
* The mcp23s17 has twice as many bits, and can be configured to work
|
|
* with either 16 bit registers or with two adjacent 8 bit banks.
|
|
*/
|
|
#define MCP_IODIR 0x00 /* init/reset: all ones */
|
|
#define MCP_IPOL 0x01
|
|
#define MCP_GPINTEN 0x02
|
|
#define MCP_DEFVAL 0x03
|
|
#define MCP_INTCON 0x04
|
|
#define MCP_IOCON 0x05
|
|
# define IOCON_MIRROR (1 << 6)
|
|
# define IOCON_SEQOP (1 << 5)
|
|
# define IOCON_HAEN (1 << 3)
|
|
# define IOCON_ODR (1 << 2)
|
|
# define IOCON_INTPOL (1 << 1)
|
|
# define IOCON_INTCC (1)
|
|
#define MCP_GPPU 0x06
|
|
#define MCP_INTF 0x07
|
|
#define MCP_INTCAP 0x08
|
|
#define MCP_GPIO 0x09
|
|
#define MCP_OLAT 0x0a
|
|
|
|
struct mcp23s08;
|
|
|
|
struct mcp23s08 {
|
|
u8 addr;
|
|
bool irq_active_high;
|
|
bool reg_shift;
|
|
|
|
u16 irq_rise;
|
|
u16 irq_fall;
|
|
int irq;
|
|
bool irq_controller;
|
|
int cached_gpio;
|
|
/* lock protects regmap access with bypass/cache flags */
|
|
struct mutex lock;
|
|
|
|
struct gpio_chip chip;
|
|
|
|
struct regmap *regmap;
|
|
struct device *dev;
|
|
|
|
struct pinctrl_dev *pctldev;
|
|
struct pinctrl_desc pinctrl_desc;
|
|
};
|
|
|
|
static const struct reg_default mcp23x08_defaults[] = {
|
|
{.reg = MCP_IODIR, .def = 0xff},
|
|
{.reg = MCP_IPOL, .def = 0x00},
|
|
{.reg = MCP_GPINTEN, .def = 0x00},
|
|
{.reg = MCP_DEFVAL, .def = 0x00},
|
|
{.reg = MCP_INTCON, .def = 0x00},
|
|
{.reg = MCP_IOCON, .def = 0x00},
|
|
{.reg = MCP_GPPU, .def = 0x00},
|
|
{.reg = MCP_OLAT, .def = 0x00},
|
|
};
|
|
|
|
static const struct regmap_range mcp23x08_volatile_range = {
|
|
.range_min = MCP_INTF,
|
|
.range_max = MCP_GPIO,
|
|
};
|
|
|
|
static const struct regmap_access_table mcp23x08_volatile_table = {
|
|
.yes_ranges = &mcp23x08_volatile_range,
|
|
.n_yes_ranges = 1,
|
|
};
|
|
|
|
static const struct regmap_range mcp23x08_precious_range = {
|
|
.range_min = MCP_GPIO,
|
|
.range_max = MCP_GPIO,
|
|
};
|
|
|
|
static const struct regmap_access_table mcp23x08_precious_table = {
|
|
.yes_ranges = &mcp23x08_precious_range,
|
|
.n_yes_ranges = 1,
|
|
};
|
|
|
|
static const struct regmap_config mcp23x08_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
|
|
.reg_stride = 1,
|
|
.volatile_table = &mcp23x08_volatile_table,
|
|
.precious_table = &mcp23x08_precious_table,
|
|
.reg_defaults = mcp23x08_defaults,
|
|
.num_reg_defaults = ARRAY_SIZE(mcp23x08_defaults),
|
|
.cache_type = REGCACHE_FLAT,
|
|
.max_register = MCP_OLAT,
|
|
};
|
|
|
|
static const struct reg_default mcp23x16_defaults[] = {
|
|
{.reg = MCP_IODIR << 1, .def = 0xffff},
|
|
{.reg = MCP_IPOL << 1, .def = 0x0000},
|
|
{.reg = MCP_GPINTEN << 1, .def = 0x0000},
|
|
{.reg = MCP_DEFVAL << 1, .def = 0x0000},
|
|
{.reg = MCP_INTCON << 1, .def = 0x0000},
|
|
{.reg = MCP_IOCON << 1, .def = 0x0000},
|
|
{.reg = MCP_GPPU << 1, .def = 0x0000},
|
|
{.reg = MCP_OLAT << 1, .def = 0x0000},
|
|
};
|
|
|
|
static const struct regmap_range mcp23x16_volatile_range = {
|
|
.range_min = MCP_INTF << 1,
|
|
.range_max = MCP_GPIO << 1,
|
|
};
|
|
|
|
static const struct regmap_access_table mcp23x16_volatile_table = {
|
|
.yes_ranges = &mcp23x16_volatile_range,
|
|
.n_yes_ranges = 1,
|
|
};
|
|
|
|
static const struct regmap_range mcp23x16_precious_range = {
|
|
.range_min = MCP_GPIO << 1,
|
|
.range_max = MCP_GPIO << 1,
|
|
};
|
|
|
|
static const struct regmap_access_table mcp23x16_precious_table = {
|
|
.yes_ranges = &mcp23x16_precious_range,
|
|
.n_yes_ranges = 1,
|
|
};
|
|
|
|
static const struct regmap_config mcp23x17_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 16,
|
|
|
|
.reg_stride = 2,
|
|
.max_register = MCP_OLAT << 1,
|
|
.volatile_table = &mcp23x16_volatile_table,
|
|
.precious_table = &mcp23x16_precious_table,
|
|
.reg_defaults = mcp23x16_defaults,
|
|
.num_reg_defaults = ARRAY_SIZE(mcp23x16_defaults),
|
|
.cache_type = REGCACHE_FLAT,
|
|
.val_format_endian = REGMAP_ENDIAN_LITTLE,
|
|
};
|
|
|
|
static int mcp_read(struct mcp23s08 *mcp, unsigned int reg, unsigned int *val)
|
|
{
|
|
return regmap_read(mcp->regmap, reg << mcp->reg_shift, val);
|
|
}
|
|
|
|
static int mcp_write(struct mcp23s08 *mcp, unsigned int reg, unsigned int val)
|
|
{
|
|
return regmap_write(mcp->regmap, reg << mcp->reg_shift, val);
|
|
}
|
|
|
|
static int mcp_set_mask(struct mcp23s08 *mcp, unsigned int reg,
|
|
unsigned int mask, bool enabled)
|
|
{
|
|
u16 val = enabled ? 0xffff : 0x0000;
|
|
return regmap_update_bits(mcp->regmap, reg << mcp->reg_shift,
|
|
mask, val);
|
|
}
|
|
|
|
static int mcp_set_bit(struct mcp23s08 *mcp, unsigned int reg,
|
|
unsigned int pin, bool enabled)
|
|
{
|
|
u16 mask = BIT(pin);
|
|
return mcp_set_mask(mcp, reg, mask, enabled);
|
|
}
|
|
|
|
static const struct pinctrl_pin_desc mcp23x08_pins[] = {
|
|
PINCTRL_PIN(0, "gpio0"),
|
|
PINCTRL_PIN(1, "gpio1"),
|
|
PINCTRL_PIN(2, "gpio2"),
|
|
PINCTRL_PIN(3, "gpio3"),
|
|
PINCTRL_PIN(4, "gpio4"),
|
|
PINCTRL_PIN(5, "gpio5"),
|
|
PINCTRL_PIN(6, "gpio6"),
|
|
PINCTRL_PIN(7, "gpio7"),
|
|
};
|
|
|
|
static const struct pinctrl_pin_desc mcp23x17_pins[] = {
|
|
PINCTRL_PIN(0, "gpio0"),
|
|
PINCTRL_PIN(1, "gpio1"),
|
|
PINCTRL_PIN(2, "gpio2"),
|
|
PINCTRL_PIN(3, "gpio3"),
|
|
PINCTRL_PIN(4, "gpio4"),
|
|
PINCTRL_PIN(5, "gpio5"),
|
|
PINCTRL_PIN(6, "gpio6"),
|
|
PINCTRL_PIN(7, "gpio7"),
|
|
PINCTRL_PIN(8, "gpio8"),
|
|
PINCTRL_PIN(9, "gpio9"),
|
|
PINCTRL_PIN(10, "gpio10"),
|
|
PINCTRL_PIN(11, "gpio11"),
|
|
PINCTRL_PIN(12, "gpio12"),
|
|
PINCTRL_PIN(13, "gpio13"),
|
|
PINCTRL_PIN(14, "gpio14"),
|
|
PINCTRL_PIN(15, "gpio15"),
|
|
};
|
|
|
|
static int mcp_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static const char *mcp_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
|
|
unsigned int group)
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
static int mcp_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
|
|
unsigned int group,
|
|
const unsigned int **pins,
|
|
unsigned int *num_pins)
|
|
{
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
static const struct pinctrl_ops mcp_pinctrl_ops = {
|
|
.get_groups_count = mcp_pinctrl_get_groups_count,
|
|
.get_group_name = mcp_pinctrl_get_group_name,
|
|
.get_group_pins = mcp_pinctrl_get_group_pins,
|
|
#ifdef CONFIG_OF
|
|
.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
|
|
.dt_free_map = pinconf_generic_dt_free_map,
|
|
#endif
|
|
};
|
|
|
|
static int mcp_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
|
|
unsigned long *config)
|
|
{
|
|
struct mcp23s08 *mcp = pinctrl_dev_get_drvdata(pctldev);
|
|
enum pin_config_param param = pinconf_to_config_param(*config);
|
|
unsigned int data, status;
|
|
int ret;
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
ret = mcp_read(mcp, MCP_GPPU, &data);
|
|
if (ret < 0)
|
|
return ret;
|
|
status = (data & BIT(pin)) ? 1 : 0;
|
|
break;
|
|
default:
|
|
dev_err(mcp->dev, "Invalid config param %04x\n", param);
|
|
return -ENOTSUPP;
|
|
}
|
|
|
|
*config = 0;
|
|
|
|
return status ? 0 : -EINVAL;
|
|
}
|
|
|
|
static int mcp_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
|
|
unsigned long *configs, unsigned int num_configs)
|
|
{
|
|
struct mcp23s08 *mcp = pinctrl_dev_get_drvdata(pctldev);
|
|
enum pin_config_param param;
|
|
u32 arg;
|
|
int ret = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < num_configs; i++) {
|
|
param = pinconf_to_config_param(configs[i]);
|
|
arg = pinconf_to_config_argument(configs[i]);
|
|
|
|
switch (param) {
|
|
case PIN_CONFIG_BIAS_PULL_UP:
|
|
ret = mcp_set_bit(mcp, MCP_GPPU, pin, arg);
|
|
break;
|
|
default:
|
|
dev_err(mcp->dev, "Invalid config param %04x\n", param);
|
|
return -ENOTSUPP;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct pinconf_ops mcp_pinconf_ops = {
|
|
.pin_config_get = mcp_pinconf_get,
|
|
.pin_config_set = mcp_pinconf_set,
|
|
.is_generic = true,
|
|
};
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_SPI_MASTER
|
|
|
|
static int mcp23sxx_spi_write(void *context, const void *data, size_t count)
|
|
{
|
|
struct mcp23s08 *mcp = context;
|
|
struct spi_device *spi = to_spi_device(mcp->dev);
|
|
struct spi_message m;
|
|
struct spi_transfer t[2] = { { .tx_buf = &mcp->addr, .len = 1, },
|
|
{ .tx_buf = data, .len = count, }, };
|
|
|
|
spi_message_init(&m);
|
|
spi_message_add_tail(&t[0], &m);
|
|
spi_message_add_tail(&t[1], &m);
|
|
|
|
return spi_sync(spi, &m);
|
|
}
|
|
|
|
static int mcp23sxx_spi_gather_write(void *context,
|
|
const void *reg, size_t reg_size,
|
|
const void *val, size_t val_size)
|
|
{
|
|
struct mcp23s08 *mcp = context;
|
|
struct spi_device *spi = to_spi_device(mcp->dev);
|
|
struct spi_message m;
|
|
struct spi_transfer t[3] = { { .tx_buf = &mcp->addr, .len = 1, },
|
|
{ .tx_buf = reg, .len = reg_size, },
|
|
{ .tx_buf = val, .len = val_size, }, };
|
|
|
|
spi_message_init(&m);
|
|
spi_message_add_tail(&t[0], &m);
|
|
spi_message_add_tail(&t[1], &m);
|
|
spi_message_add_tail(&t[2], &m);
|
|
|
|
return spi_sync(spi, &m);
|
|
}
|
|
|
|
static int mcp23sxx_spi_read(void *context, const void *reg, size_t reg_size,
|
|
void *val, size_t val_size)
|
|
{
|
|
struct mcp23s08 *mcp = context;
|
|
struct spi_device *spi = to_spi_device(mcp->dev);
|
|
u8 tx[2];
|
|
|
|
if (reg_size != 1)
|
|
return -EINVAL;
|
|
|
|
tx[0] = mcp->addr | 0x01;
|
|
tx[1] = *((u8 *) reg);
|
|
|
|
return spi_write_then_read(spi, tx, sizeof(tx), val, val_size);
|
|
}
|
|
|
|
static const struct regmap_bus mcp23sxx_spi_regmap = {
|
|
.write = mcp23sxx_spi_write,
|
|
.gather_write = mcp23sxx_spi_gather_write,
|
|
.read = mcp23sxx_spi_read,
|
|
};
|
|
|
|
#endif /* CONFIG_SPI_MASTER */
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
/* A given spi_device can represent up to eight mcp23sxx chips
|
|
* sharing the same chipselect but using different addresses
|
|
* (e.g. chips #0 and #3 might be populated, but not #1 or $2).
|
|
* Driver data holds all the per-chip data.
|
|
*/
|
|
struct mcp23s08_driver_data {
|
|
unsigned ngpio;
|
|
struct mcp23s08 *mcp[8];
|
|
struct mcp23s08 chip[];
|
|
};
|
|
|
|
|
|
static int mcp23s08_direction_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct mcp23s08 *mcp = gpiochip_get_data(chip);
|
|
int status;
|
|
|
|
mutex_lock(&mcp->lock);
|
|
status = mcp_set_bit(mcp, MCP_IODIR, offset, true);
|
|
mutex_unlock(&mcp->lock);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int mcp23s08_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct mcp23s08 *mcp = gpiochip_get_data(chip);
|
|
int status, ret;
|
|
|
|
mutex_lock(&mcp->lock);
|
|
|
|
/* REVISIT reading this clears any IRQ ... */
|
|
ret = mcp_read(mcp, MCP_GPIO, &status);
|
|
if (ret < 0)
|
|
status = 0;
|
|
else {
|
|
mcp->cached_gpio = status;
|
|
status = !!(status & (1 << offset));
|
|
}
|
|
|
|
mutex_unlock(&mcp->lock);
|
|
return status;
|
|
}
|
|
|
|
static int __mcp23s08_set(struct mcp23s08 *mcp, unsigned mask, bool value)
|
|
{
|
|
return mcp_set_mask(mcp, MCP_OLAT, mask, value);
|
|
}
|
|
|
|
static void mcp23s08_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct mcp23s08 *mcp = gpiochip_get_data(chip);
|
|
unsigned mask = BIT(offset);
|
|
|
|
mutex_lock(&mcp->lock);
|
|
__mcp23s08_set(mcp, mask, !!value);
|
|
mutex_unlock(&mcp->lock);
|
|
}
|
|
|
|
static int
|
|
mcp23s08_direction_output(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct mcp23s08 *mcp = gpiochip_get_data(chip);
|
|
unsigned mask = BIT(offset);
|
|
int status;
|
|
|
|
mutex_lock(&mcp->lock);
|
|
status = __mcp23s08_set(mcp, mask, value);
|
|
if (status == 0) {
|
|
status = mcp_set_mask(mcp, MCP_IODIR, mask, false);
|
|
}
|
|
mutex_unlock(&mcp->lock);
|
|
return status;
|
|
}
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
static irqreturn_t mcp23s08_irq(int irq, void *data)
|
|
{
|
|
struct mcp23s08 *mcp = data;
|
|
int intcap, intcon, intf, i, gpio, gpio_orig, intcap_mask, defval;
|
|
unsigned int child_irq;
|
|
bool intf_set, intcap_changed, gpio_bit_changed,
|
|
defval_changed, gpio_set;
|
|
|
|
mutex_lock(&mcp->lock);
|
|
if (mcp_read(mcp, MCP_INTF, &intf) < 0) {
|
|
mutex_unlock(&mcp->lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (mcp_read(mcp, MCP_INTCAP, &intcap) < 0) {
|
|
mutex_unlock(&mcp->lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (mcp_read(mcp, MCP_INTCON, &intcon) < 0) {
|
|
mutex_unlock(&mcp->lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (mcp_read(mcp, MCP_DEFVAL, &defval) < 0) {
|
|
mutex_unlock(&mcp->lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* This clears the interrupt(configurable on S18) */
|
|
if (mcp_read(mcp, MCP_GPIO, &gpio) < 0) {
|
|
mutex_unlock(&mcp->lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
gpio_orig = mcp->cached_gpio;
|
|
mcp->cached_gpio = gpio;
|
|
mutex_unlock(&mcp->lock);
|
|
|
|
if (intf == 0) {
|
|
/* There is no interrupt pending */
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
dev_dbg(mcp->chip.parent,
|
|
"intcap 0x%04X intf 0x%04X gpio_orig 0x%04X gpio 0x%04X\n",
|
|
intcap, intf, gpio_orig, gpio);
|
|
|
|
for (i = 0; i < mcp->chip.ngpio; i++) {
|
|
/* We must check all of the inputs on the chip,
|
|
* otherwise we may not notice a change on >=2 pins.
|
|
*
|
|
* On at least the mcp23s17, INTCAP is only updated
|
|
* one byte at a time(INTCAPA and INTCAPB are
|
|
* not written to at the same time - only on a per-bank
|
|
* basis).
|
|
*
|
|
* INTF only contains the single bit that caused the
|
|
* interrupt per-bank. On the mcp23s17, there is
|
|
* INTFA and INTFB. If two pins are changed on the A
|
|
* side at the same time, INTF will only have one bit
|
|
* set. If one pin on the A side and one pin on the B
|
|
* side are changed at the same time, INTF will have
|
|
* two bits set. Thus, INTF can't be the only check
|
|
* to see if the input has changed.
|
|
*/
|
|
|
|
intf_set = intf & BIT(i);
|
|
if (i < 8 && intf_set)
|
|
intcap_mask = 0x00FF;
|
|
else if (i >= 8 && intf_set)
|
|
intcap_mask = 0xFF00;
|
|
else
|
|
intcap_mask = 0x00;
|
|
|
|
intcap_changed = (intcap_mask &
|
|
(intcap & BIT(i))) !=
|
|
(intcap_mask & (BIT(i) & gpio_orig));
|
|
gpio_set = BIT(i) & gpio;
|
|
gpio_bit_changed = (BIT(i) & gpio_orig) !=
|
|
(BIT(i) & gpio);
|
|
defval_changed = (BIT(i) & intcon) &&
|
|
((BIT(i) & gpio) !=
|
|
(BIT(i) & defval));
|
|
|
|
if (((gpio_bit_changed || intcap_changed) &&
|
|
(BIT(i) & mcp->irq_rise) && gpio_set) ||
|
|
((gpio_bit_changed || intcap_changed) &&
|
|
(BIT(i) & mcp->irq_fall) && !gpio_set) ||
|
|
defval_changed) {
|
|
child_irq = irq_find_mapping(mcp->chip.irq.domain, i);
|
|
handle_nested_irq(child_irq);
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void mcp23s08_irq_mask(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
|
|
struct mcp23s08 *mcp = gpiochip_get_data(gc);
|
|
unsigned int pos = data->hwirq;
|
|
|
|
mcp_set_bit(mcp, MCP_GPINTEN, pos, false);
|
|
}
|
|
|
|
static void mcp23s08_irq_unmask(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
|
|
struct mcp23s08 *mcp = gpiochip_get_data(gc);
|
|
unsigned int pos = data->hwirq;
|
|
|
|
mcp_set_bit(mcp, MCP_GPINTEN, pos, true);
|
|
}
|
|
|
|
static int mcp23s08_irq_set_type(struct irq_data *data, unsigned int type)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
|
|
struct mcp23s08 *mcp = gpiochip_get_data(gc);
|
|
unsigned int pos = data->hwirq;
|
|
int status = 0;
|
|
|
|
if ((type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) {
|
|
mcp_set_bit(mcp, MCP_INTCON, pos, false);
|
|
mcp->irq_rise |= BIT(pos);
|
|
mcp->irq_fall |= BIT(pos);
|
|
} else if (type & IRQ_TYPE_EDGE_RISING) {
|
|
mcp_set_bit(mcp, MCP_INTCON, pos, false);
|
|
mcp->irq_rise |= BIT(pos);
|
|
mcp->irq_fall &= ~BIT(pos);
|
|
} else if (type & IRQ_TYPE_EDGE_FALLING) {
|
|
mcp_set_bit(mcp, MCP_INTCON, pos, false);
|
|
mcp->irq_rise &= ~BIT(pos);
|
|
mcp->irq_fall |= BIT(pos);
|
|
} else if (type & IRQ_TYPE_LEVEL_HIGH) {
|
|
mcp_set_bit(mcp, MCP_INTCON, pos, true);
|
|
mcp_set_bit(mcp, MCP_DEFVAL, pos, false);
|
|
} else if (type & IRQ_TYPE_LEVEL_LOW) {
|
|
mcp_set_bit(mcp, MCP_INTCON, pos, true);
|
|
mcp_set_bit(mcp, MCP_DEFVAL, pos, true);
|
|
} else
|
|
return -EINVAL;
|
|
|
|
return status;
|
|
}
|
|
|
|
static void mcp23s08_irq_bus_lock(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
|
|
struct mcp23s08 *mcp = gpiochip_get_data(gc);
|
|
|
|
mutex_lock(&mcp->lock);
|
|
regcache_cache_only(mcp->regmap, true);
|
|
}
|
|
|
|
static void mcp23s08_irq_bus_unlock(struct irq_data *data)
|
|
{
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
|
|
struct mcp23s08 *mcp = gpiochip_get_data(gc);
|
|
|
|
regcache_cache_only(mcp->regmap, false);
|
|
regcache_sync(mcp->regmap);
|
|
|
|
mutex_unlock(&mcp->lock);
|
|
}
|
|
|
|
static struct irq_chip mcp23s08_irq_chip = {
|
|
.name = "gpio-mcp23xxx",
|
|
.irq_mask = mcp23s08_irq_mask,
|
|
.irq_unmask = mcp23s08_irq_unmask,
|
|
.irq_set_type = mcp23s08_irq_set_type,
|
|
.irq_bus_lock = mcp23s08_irq_bus_lock,
|
|
.irq_bus_sync_unlock = mcp23s08_irq_bus_unlock,
|
|
};
|
|
|
|
static int mcp23s08_irq_setup(struct mcp23s08 *mcp)
|
|
{
|
|
struct gpio_chip *chip = &mcp->chip;
|
|
int err;
|
|
unsigned long irqflags = IRQF_ONESHOT | IRQF_SHARED;
|
|
|
|
if (mcp->irq_active_high)
|
|
irqflags |= IRQF_TRIGGER_HIGH;
|
|
else
|
|
irqflags |= IRQF_TRIGGER_LOW;
|
|
|
|
err = devm_request_threaded_irq(chip->parent, mcp->irq, NULL,
|
|
mcp23s08_irq,
|
|
irqflags, dev_name(chip->parent), mcp);
|
|
if (err != 0) {
|
|
dev_err(chip->parent, "unable to request IRQ#%d: %d\n",
|
|
mcp->irq, err);
|
|
return err;
|
|
}
|
|
|
|
err = gpiochip_irqchip_add_nested(chip,
|
|
&mcp23s08_irq_chip,
|
|
0,
|
|
handle_simple_irq,
|
|
IRQ_TYPE_NONE);
|
|
if (err) {
|
|
dev_err(chip->parent,
|
|
"could not connect irqchip to gpiochip: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
gpiochip_set_nested_irqchip(chip,
|
|
&mcp23s08_irq_chip,
|
|
mcp->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
|
|
#include <linux/seq_file.h>
|
|
|
|
/*
|
|
* This compares the chip's registers with the register
|
|
* cache and corrects any incorrectly set register. This
|
|
* can be used to fix state for MCP23xxx, that temporary
|
|
* lost its power supply.
|
|
*/
|
|
#define MCP23S08_CONFIG_REGS 8
|
|
static int __check_mcp23s08_reg_cache(struct mcp23s08 *mcp)
|
|
{
|
|
int cached[MCP23S08_CONFIG_REGS];
|
|
int err = 0, i;
|
|
|
|
/* read cached config registers */
|
|
for (i = 0; i < MCP23S08_CONFIG_REGS; i++) {
|
|
err = mcp_read(mcp, i, &cached[i]);
|
|
if (err)
|
|
goto out;
|
|
}
|
|
|
|
regcache_cache_bypass(mcp->regmap, true);
|
|
|
|
for (i = 0; i < MCP23S08_CONFIG_REGS; i++) {
|
|
int uncached;
|
|
err = mcp_read(mcp, i, &uncached);
|
|
if (err)
|
|
goto out;
|
|
|
|
if (uncached != cached[i]) {
|
|
dev_err(mcp->dev, "restoring reg 0x%02x from 0x%04x to 0x%04x (power-loss?)\n",
|
|
i, uncached, cached[i]);
|
|
mcp_write(mcp, i, cached[i]);
|
|
}
|
|
}
|
|
|
|
out:
|
|
if (err)
|
|
dev_err(mcp->dev, "read error: reg=%02x, err=%d", i, err);
|
|
regcache_cache_bypass(mcp->regmap, false);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* This shows more info than the generic gpio dump code:
|
|
* pullups, deglitching, open drain drive.
|
|
*/
|
|
static void mcp23s08_dbg_show(struct seq_file *s, struct gpio_chip *chip)
|
|
{
|
|
struct mcp23s08 *mcp;
|
|
char bank;
|
|
int t;
|
|
unsigned mask;
|
|
int iodir, gpio, gppu;
|
|
|
|
mcp = gpiochip_get_data(chip);
|
|
|
|
/* NOTE: we only handle one bank for now ... */
|
|
bank = '0' + ((mcp->addr >> 1) & 0x7);
|
|
|
|
mutex_lock(&mcp->lock);
|
|
|
|
t = __check_mcp23s08_reg_cache(mcp);
|
|
if (t) {
|
|
seq_printf(s, " I/O Error\n");
|
|
goto done;
|
|
}
|
|
t = mcp_read(mcp, MCP_IODIR, &iodir);
|
|
if (t) {
|
|
seq_printf(s, " I/O Error\n");
|
|
goto done;
|
|
}
|
|
t = mcp_read(mcp, MCP_GPIO, &gpio);
|
|
if (t) {
|
|
seq_printf(s, " I/O Error\n");
|
|
goto done;
|
|
}
|
|
t = mcp_read(mcp, MCP_GPPU, &gppu);
|
|
if (t) {
|
|
seq_printf(s, " I/O Error\n");
|
|
goto done;
|
|
}
|
|
|
|
for (t = 0, mask = BIT(0); t < chip->ngpio; t++, mask <<= 1) {
|
|
const char *label;
|
|
|
|
label = gpiochip_is_requested(chip, t);
|
|
if (!label)
|
|
continue;
|
|
|
|
seq_printf(s, " gpio-%-3d P%c.%d (%-12s) %s %s %s",
|
|
chip->base + t, bank, t, label,
|
|
(iodir & mask) ? "in " : "out",
|
|
(gpio & mask) ? "hi" : "lo",
|
|
(gppu & mask) ? "up" : " ");
|
|
/* NOTE: ignoring the irq-related registers */
|
|
seq_puts(s, "\n");
|
|
}
|
|
done:
|
|
mutex_unlock(&mcp->lock);
|
|
}
|
|
|
|
#else
|
|
#define mcp23s08_dbg_show NULL
|
|
#endif
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
static int mcp23s08_probe_one(struct mcp23s08 *mcp, struct device *dev,
|
|
void *data, unsigned addr, unsigned type,
|
|
unsigned int base, int cs)
|
|
{
|
|
int status, ret;
|
|
bool mirror = false;
|
|
|
|
mutex_init(&mcp->lock);
|
|
|
|
mcp->dev = dev;
|
|
mcp->addr = addr;
|
|
mcp->irq_active_high = false;
|
|
|
|
mcp->chip.direction_input = mcp23s08_direction_input;
|
|
mcp->chip.get = mcp23s08_get;
|
|
mcp->chip.direction_output = mcp23s08_direction_output;
|
|
mcp->chip.set = mcp23s08_set;
|
|
mcp->chip.dbg_show = mcp23s08_dbg_show;
|
|
#ifdef CONFIG_OF_GPIO
|
|
mcp->chip.of_gpio_n_cells = 2;
|
|
mcp->chip.of_node = dev->of_node;
|
|
#endif
|
|
|
|
switch (type) {
|
|
#ifdef CONFIG_SPI_MASTER
|
|
case MCP_TYPE_S08:
|
|
mcp->regmap = devm_regmap_init(dev, &mcp23sxx_spi_regmap, mcp,
|
|
&mcp23x08_regmap);
|
|
mcp->reg_shift = 0;
|
|
mcp->chip.ngpio = 8;
|
|
mcp->chip.label = "mcp23s08";
|
|
break;
|
|
|
|
case MCP_TYPE_S17:
|
|
mcp->regmap = devm_regmap_init(dev, &mcp23sxx_spi_regmap, mcp,
|
|
&mcp23x17_regmap);
|
|
mcp->reg_shift = 1;
|
|
mcp->chip.ngpio = 16;
|
|
mcp->chip.label = "mcp23s17";
|
|
break;
|
|
|
|
case MCP_TYPE_S18:
|
|
mcp->regmap = devm_regmap_init(dev, &mcp23sxx_spi_regmap, mcp,
|
|
&mcp23x17_regmap);
|
|
mcp->reg_shift = 1;
|
|
mcp->chip.ngpio = 16;
|
|
mcp->chip.label = "mcp23s18";
|
|
break;
|
|
#endif /* CONFIG_SPI_MASTER */
|
|
|
|
#if IS_ENABLED(CONFIG_I2C)
|
|
case MCP_TYPE_008:
|
|
mcp->regmap = devm_regmap_init_i2c(data, &mcp23x08_regmap);
|
|
mcp->reg_shift = 0;
|
|
mcp->chip.ngpio = 8;
|
|
mcp->chip.label = "mcp23008";
|
|
break;
|
|
|
|
case MCP_TYPE_017:
|
|
mcp->regmap = devm_regmap_init_i2c(data, &mcp23x17_regmap);
|
|
mcp->reg_shift = 1;
|
|
mcp->chip.ngpio = 16;
|
|
mcp->chip.label = "mcp23017";
|
|
break;
|
|
|
|
case MCP_TYPE_018:
|
|
mcp->regmap = devm_regmap_init_i2c(data, &mcp23x17_regmap);
|
|
mcp->reg_shift = 1;
|
|
mcp->chip.ngpio = 16;
|
|
mcp->chip.label = "mcp23018";
|
|
break;
|
|
#endif /* CONFIG_I2C */
|
|
|
|
default:
|
|
dev_err(dev, "invalid device type (%d)\n", type);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (IS_ERR(mcp->regmap))
|
|
return PTR_ERR(mcp->regmap);
|
|
|
|
mcp->chip.base = base;
|
|
mcp->chip.can_sleep = true;
|
|
mcp->chip.parent = dev;
|
|
mcp->chip.owner = THIS_MODULE;
|
|
|
|
/* verify MCP_IOCON.SEQOP = 0, so sequential reads work,
|
|
* and MCP_IOCON.HAEN = 1, so we work with all chips.
|
|
*/
|
|
|
|
ret = mcp_read(mcp, MCP_IOCON, &status);
|
|
if (ret < 0)
|
|
goto fail;
|
|
|
|
mcp->irq_controller =
|
|
device_property_read_bool(dev, "interrupt-controller");
|
|
if (mcp->irq && mcp->irq_controller) {
|
|
mcp->irq_active_high =
|
|
device_property_read_bool(dev,
|
|
"microchip,irq-active-high");
|
|
|
|
mirror = device_property_read_bool(dev, "microchip,irq-mirror");
|
|
}
|
|
|
|
if ((status & IOCON_SEQOP) || !(status & IOCON_HAEN) || mirror ||
|
|
mcp->irq_active_high) {
|
|
/* mcp23s17 has IOCON twice, make sure they are in sync */
|
|
status &= ~(IOCON_SEQOP | (IOCON_SEQOP << 8));
|
|
status |= IOCON_HAEN | (IOCON_HAEN << 8);
|
|
if (mcp->irq_active_high)
|
|
status |= IOCON_INTPOL | (IOCON_INTPOL << 8);
|
|
else
|
|
status &= ~(IOCON_INTPOL | (IOCON_INTPOL << 8));
|
|
|
|
if (mirror)
|
|
status |= IOCON_MIRROR | (IOCON_MIRROR << 8);
|
|
|
|
if (type == MCP_TYPE_S18 || type == MCP_TYPE_018)
|
|
status |= IOCON_INTCC | (IOCON_INTCC << 8);
|
|
|
|
ret = mcp_write(mcp, MCP_IOCON, status);
|
|
if (ret < 0)
|
|
goto fail;
|
|
}
|
|
|
|
ret = devm_gpiochip_add_data(dev, &mcp->chip, mcp);
|
|
if (ret < 0)
|
|
goto fail;
|
|
|
|
if (mcp->irq && mcp->irq_controller) {
|
|
ret = mcp23s08_irq_setup(mcp);
|
|
if (ret)
|
|
goto fail;
|
|
}
|
|
|
|
mcp->pinctrl_desc.name = "mcp23xxx-pinctrl";
|
|
mcp->pinctrl_desc.pctlops = &mcp_pinctrl_ops;
|
|
mcp->pinctrl_desc.confops = &mcp_pinconf_ops;
|
|
mcp->pinctrl_desc.npins = mcp->chip.ngpio;
|
|
if (mcp->pinctrl_desc.npins == 8)
|
|
mcp->pinctrl_desc.pins = mcp23x08_pins;
|
|
else if (mcp->pinctrl_desc.npins == 16)
|
|
mcp->pinctrl_desc.pins = mcp23x17_pins;
|
|
mcp->pinctrl_desc.owner = THIS_MODULE;
|
|
|
|
mcp->pctldev = devm_pinctrl_register(dev, &mcp->pinctrl_desc, mcp);
|
|
if (IS_ERR(mcp->pctldev)) {
|
|
ret = PTR_ERR(mcp->pctldev);
|
|
goto fail;
|
|
}
|
|
|
|
fail:
|
|
if (ret < 0)
|
|
dev_dbg(dev, "can't setup chip %d, --> %d\n", addr, ret);
|
|
return ret;
|
|
}
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_OF
|
|
#ifdef CONFIG_SPI_MASTER
|
|
static const struct of_device_id mcp23s08_spi_of_match[] = {
|
|
{
|
|
.compatible = "microchip,mcp23s08",
|
|
.data = (void *) MCP_TYPE_S08,
|
|
},
|
|
{
|
|
.compatible = "microchip,mcp23s17",
|
|
.data = (void *) MCP_TYPE_S17,
|
|
},
|
|
{
|
|
.compatible = "microchip,mcp23s18",
|
|
.data = (void *) MCP_TYPE_S18,
|
|
},
|
|
/* NOTE: The use of the mcp prefix is deprecated and will be removed. */
|
|
{
|
|
.compatible = "mcp,mcp23s08",
|
|
.data = (void *) MCP_TYPE_S08,
|
|
},
|
|
{
|
|
.compatible = "mcp,mcp23s17",
|
|
.data = (void *) MCP_TYPE_S17,
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mcp23s08_spi_of_match);
|
|
#endif
|
|
|
|
#if IS_ENABLED(CONFIG_I2C)
|
|
static const struct of_device_id mcp23s08_i2c_of_match[] = {
|
|
{
|
|
.compatible = "microchip,mcp23008",
|
|
.data = (void *) MCP_TYPE_008,
|
|
},
|
|
{
|
|
.compatible = "microchip,mcp23017",
|
|
.data = (void *) MCP_TYPE_017,
|
|
},
|
|
{
|
|
.compatible = "microchip,mcp23018",
|
|
.data = (void *) MCP_TYPE_018,
|
|
},
|
|
/* NOTE: The use of the mcp prefix is deprecated and will be removed. */
|
|
{
|
|
.compatible = "mcp,mcp23008",
|
|
.data = (void *) MCP_TYPE_008,
|
|
},
|
|
{
|
|
.compatible = "mcp,mcp23017",
|
|
.data = (void *) MCP_TYPE_017,
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mcp23s08_i2c_of_match);
|
|
#endif
|
|
#endif /* CONFIG_OF */
|
|
|
|
|
|
#if IS_ENABLED(CONFIG_I2C)
|
|
|
|
static int mcp230xx_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct mcp23s08_platform_data *pdata, local_pdata;
|
|
struct mcp23s08 *mcp;
|
|
int status;
|
|
|
|
pdata = dev_get_platdata(&client->dev);
|
|
if (!pdata) {
|
|
pdata = &local_pdata;
|
|
pdata->base = -1;
|
|
}
|
|
|
|
mcp = devm_kzalloc(&client->dev, sizeof(*mcp), GFP_KERNEL);
|
|
if (!mcp)
|
|
return -ENOMEM;
|
|
|
|
mcp->irq = client->irq;
|
|
status = mcp23s08_probe_one(mcp, &client->dev, client, client->addr,
|
|
id->driver_data, pdata->base, 0);
|
|
if (status)
|
|
return status;
|
|
|
|
i2c_set_clientdata(client, mcp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id mcp230xx_id[] = {
|
|
{ "mcp23008", MCP_TYPE_008 },
|
|
{ "mcp23017", MCP_TYPE_017 },
|
|
{ "mcp23018", MCP_TYPE_018 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mcp230xx_id);
|
|
|
|
static struct i2c_driver mcp230xx_driver = {
|
|
.driver = {
|
|
.name = "mcp230xx",
|
|
.of_match_table = of_match_ptr(mcp23s08_i2c_of_match),
|
|
},
|
|
.probe = mcp230xx_probe,
|
|
.id_table = mcp230xx_id,
|
|
};
|
|
|
|
static int __init mcp23s08_i2c_init(void)
|
|
{
|
|
return i2c_add_driver(&mcp230xx_driver);
|
|
}
|
|
|
|
static void mcp23s08_i2c_exit(void)
|
|
{
|
|
i2c_del_driver(&mcp230xx_driver);
|
|
}
|
|
|
|
#else
|
|
|
|
static int __init mcp23s08_i2c_init(void) { return 0; }
|
|
static void mcp23s08_i2c_exit(void) { }
|
|
|
|
#endif /* CONFIG_I2C */
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_SPI_MASTER
|
|
|
|
static int mcp23s08_probe(struct spi_device *spi)
|
|
{
|
|
struct mcp23s08_platform_data *pdata, local_pdata;
|
|
unsigned addr;
|
|
int chips = 0;
|
|
struct mcp23s08_driver_data *data;
|
|
int status, type;
|
|
unsigned ngpio = 0;
|
|
const struct of_device_id *match;
|
|
|
|
match = of_match_device(of_match_ptr(mcp23s08_spi_of_match), &spi->dev);
|
|
if (match)
|
|
type = (int)(uintptr_t)match->data;
|
|
else
|
|
type = spi_get_device_id(spi)->driver_data;
|
|
|
|
pdata = dev_get_platdata(&spi->dev);
|
|
if (!pdata) {
|
|
pdata = &local_pdata;
|
|
pdata->base = -1;
|
|
|
|
status = device_property_read_u32(&spi->dev,
|
|
"microchip,spi-present-mask", &pdata->spi_present_mask);
|
|
if (status) {
|
|
status = device_property_read_u32(&spi->dev,
|
|
"mcp,spi-present-mask",
|
|
&pdata->spi_present_mask);
|
|
|
|
if (status) {
|
|
dev_err(&spi->dev, "missing spi-present-mask");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!pdata->spi_present_mask || pdata->spi_present_mask > 0xff) {
|
|
dev_err(&spi->dev, "invalid spi-present-mask");
|
|
return -ENODEV;
|
|
}
|
|
|
|
for (addr = 0; addr < MCP_MAX_DEV_PER_CS; addr++) {
|
|
if (pdata->spi_present_mask & BIT(addr))
|
|
chips++;
|
|
}
|
|
|
|
if (!chips)
|
|
return -ENODEV;
|
|
|
|
data = devm_kzalloc(&spi->dev,
|
|
sizeof(*data) + chips * sizeof(struct mcp23s08),
|
|
GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
spi_set_drvdata(spi, data);
|
|
|
|
for (addr = 0; addr < MCP_MAX_DEV_PER_CS; addr++) {
|
|
if (!(pdata->spi_present_mask & BIT(addr)))
|
|
continue;
|
|
chips--;
|
|
data->mcp[addr] = &data->chip[chips];
|
|
data->mcp[addr]->irq = spi->irq;
|
|
status = mcp23s08_probe_one(data->mcp[addr], &spi->dev, spi,
|
|
0x40 | (addr << 1), type,
|
|
pdata->base, addr);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
if (pdata->base != -1)
|
|
pdata->base += data->mcp[addr]->chip.ngpio;
|
|
ngpio += data->mcp[addr]->chip.ngpio;
|
|
}
|
|
data->ngpio = ngpio;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct spi_device_id mcp23s08_ids[] = {
|
|
{ "mcp23s08", MCP_TYPE_S08 },
|
|
{ "mcp23s17", MCP_TYPE_S17 },
|
|
{ "mcp23s18", MCP_TYPE_S18 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, mcp23s08_ids);
|
|
|
|
static struct spi_driver mcp23s08_driver = {
|
|
.probe = mcp23s08_probe,
|
|
.id_table = mcp23s08_ids,
|
|
.driver = {
|
|
.name = "mcp23s08",
|
|
.of_match_table = of_match_ptr(mcp23s08_spi_of_match),
|
|
},
|
|
};
|
|
|
|
static int __init mcp23s08_spi_init(void)
|
|
{
|
|
return spi_register_driver(&mcp23s08_driver);
|
|
}
|
|
|
|
static void mcp23s08_spi_exit(void)
|
|
{
|
|
spi_unregister_driver(&mcp23s08_driver);
|
|
}
|
|
|
|
#else
|
|
|
|
static int __init mcp23s08_spi_init(void) { return 0; }
|
|
static void mcp23s08_spi_exit(void) { }
|
|
|
|
#endif /* CONFIG_SPI_MASTER */
|
|
|
|
/*----------------------------------------------------------------------*/
|
|
|
|
static int __init mcp23s08_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = mcp23s08_spi_init();
|
|
if (ret)
|
|
goto spi_fail;
|
|
|
|
ret = mcp23s08_i2c_init();
|
|
if (ret)
|
|
goto i2c_fail;
|
|
|
|
return 0;
|
|
|
|
i2c_fail:
|
|
mcp23s08_spi_exit();
|
|
spi_fail:
|
|
return ret;
|
|
}
|
|
/* register after spi/i2c postcore initcall and before
|
|
* subsys initcalls that may rely on these GPIOs
|
|
*/
|
|
subsys_initcall(mcp23s08_init);
|
|
|
|
static void __exit mcp23s08_exit(void)
|
|
{
|
|
mcp23s08_spi_exit();
|
|
mcp23s08_i2c_exit();
|
|
}
|
|
module_exit(mcp23s08_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|