2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 21:24:00 +08:00
linux-next/sound/core/Kconfig
Takashi Iwai 111b0cdb97 ALSA: seq: Allow the modular sequencer registration
Many drivers bind the sequencer stuff in off-load by another driver
module, so that it's loaded only on demand.  In the current code, this
mechanism doesn't work when the driver is built-in while the sequencer
is module.  We check with IS_REACHABLE() and enable only when the
sequencer is in the same level of build.

However, this is basically a overshoot.  The binder code
(snd-seq-device) is an individual module from the sequencer core
(snd-seq), and we just have to make the former a built-in while
keeping the latter a module for allowing the scenario like the above.

This patch achieves that by rewriting Kconfig slightly.  Now, a driver
that provides the manual sequencer device binding should select
CONFIG_SND_SEQ_DEVICE in a way as
	select SND_SEQ_DEVICE if SND_SEQUENCER != n

Note that the "!=n" is needed here to avoid the influence of the
sequencer core is module while the driver is built-in.

Also, since rawmidi.o may be linked with snd_seq_device.o when
built-in, we have to shuffle the code to make the linker happy.
(the kernel linker isn't smart enough yet to handle such a case.)
That is, snd_seq_device.c is moved to sound/core from sound/core/seq,
as well as Makefile.

Last but not least, the patch replaces the code using IS_REACHABLE()
with IS_ENABLED(), since now the condition meets always when enabled.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-12 08:43:33 +02:00

188 lines
4.7 KiB
Plaintext

# ALSA soundcard-configuration
config SND_TIMER
tristate
config SND_PCM
tristate
select SND_TIMER if SND_PCM_TIMER
config SND_PCM_ELD
bool
config SND_PCM_IEC958
bool
config SND_DMAENGINE_PCM
tristate
config SND_HWDEP
tristate
config SND_SEQ_DEVICE
tristate
config SND_RAWMIDI
tristate
select SND_SEQ_DEVICE if SND_SEQUENCER != n
config SND_COMPRESS_OFFLOAD
tristate
config SND_JACK
bool
# enable input device support in jack layer
config SND_JACK_INPUT_DEV
bool
depends on SND_JACK
default y if INPUT=y || INPUT=SND
config SND_OSSEMUL
bool "Enable OSS Emulation"
select SOUND_OSS_CORE
help
This option enables the build of OSS emulation layer.
config SND_MIXER_OSS
tristate "OSS Mixer API"
depends on SND_OSSEMUL
help
To enable OSS mixer API emulation (/dev/mixer*), say Y here
and read <file:Documentation/sound/alsa/OSS-Emulation.txt>.
Many programs still use the OSS API, so say Y.
To compile this driver as a module, choose M here: the module
will be called snd-mixer-oss.
config SND_PCM_OSS
tristate "OSS PCM (digital audio) API"
depends on SND_OSSEMUL
select SND_PCM
help
To enable OSS digital audio (PCM) emulation (/dev/dsp*), say Y
here and read <file:Documentation/sound/alsa/OSS-Emulation.txt>.
Many programs still use the OSS API, so say Y.
To compile this driver as a module, choose M here: the module
will be called snd-pcm-oss.
config SND_PCM_OSS_PLUGINS
bool "OSS PCM (digital audio) API - Include plugin system"
depends on SND_PCM_OSS
default y
help
If you disable this option, the ALSA's OSS PCM API will not
support conversion of channels, formats and rates. It will
behave like most of new OSS/Free drivers in 2.4/2.6 kernels.
config SND_PCM_TIMER
bool "PCM timer interface" if EXPERT
default y
help
If you disable this option, pcm timer will be unavailable, so
those stubs that use pcm timer (e.g. dmix, dsnoop & co) may work
incorrectlly.
For some embedded devices, we may disable it to reduce memory
footprint, about 20KB on x86_64 platform.
config SND_HRTIMER
tristate "HR-timer backend support"
depends on HIGH_RES_TIMERS
select SND_TIMER
help
Say Y here to enable HR-timer backend for ALSA timer. ALSA uses
the hrtimer as a precise timing source. The ALSA sequencer code
also can use this timing source.
To compile this driver as a module, choose M here: the module
will be called snd-hrtimer.
config SND_DYNAMIC_MINORS
bool "Dynamic device file minor numbers"
help
If you say Y here, the minor numbers of ALSA device files in
/dev/snd/ are allocated dynamically. This allows you to have
more than 8 sound cards, but requires a dynamic device file
system like udev.
If you are unsure about this, say N here.
config SND_MAX_CARDS
int "Max number of sound cards"
range 4 256
default 32
depends on SND_DYNAMIC_MINORS
help
Specify the max number of sound cards that can be assigned
on a single machine.
config SND_SUPPORT_OLD_API
bool "Support old ALSA API"
default y
help
Say Y here to support the obsolete ALSA PCM API (ver.0.9.0 rc3
or older).
config SND_PROC_FS
bool "Sound Proc FS Support" if EXPERT
depends on PROC_FS
default y
help
Say 'N' to disable Sound proc FS, which may reduce code size about
9KB on x86_64 platform.
If unsure say Y.
config SND_VERBOSE_PROCFS
bool "Verbose procfs contents"
depends on SND_PROC_FS
default y
help
Say Y here to include code for verbose procfs contents (provides
useful information to developers when a problem occurs). On the
other side, it makes the ALSA subsystem larger.
config SND_VERBOSE_PRINTK
bool "Verbose printk"
help
Say Y here to enable verbose log messages. These messages
will help to identify source file and position containing
printed messages.
You don't need this unless you're debugging ALSA.
config SND_DEBUG
bool "Debug"
help
Say Y here to enable ALSA debug code.
config SND_DEBUG_VERBOSE
bool "More verbose debug"
depends on SND_DEBUG
help
Say Y here to enable extra-verbose debugging messages.
Let me repeat: it enables EXTRA-VERBOSE DEBUGGING messages.
So, say Y only if you are ready to be annoyed.
config SND_PCM_XRUN_DEBUG
bool "Enable PCM ring buffer overrun/underrun debugging"
default n
depends on SND_DEBUG && SND_VERBOSE_PROCFS
help
Say Y to enable the PCM ring buffer overrun/underrun debugging.
It is usually not required, but if you have trouble with
sound clicking when system is loaded, it may help to determine
the process or driver which causes the scheduling gaps.
config SND_VMASTER
bool
config SND_DMA_SGBUF
def_bool y
depends on X86
source "sound/core/seq/Kconfig"