2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 06:34:11 +08:00
linux-next/drivers/usb/host/ehci-msm.c
Andy Gross 815c9d6a3c usb: host: ehci-msm: Conditionally call ehci suspend/resume
This patch fixes a suspend/resume issue where the driver is blindly
calling ehci_suspend/resume functions when the ehci hasn't been setup.
This results in a crash during suspend/resume operations.

Signed-off-by: Andy Gross <andy.gross@linaro.org>
Tested-by: Pramod Gurav <pramod.gurav@linaro.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-07 22:15:25 -07:00

266 lines
6.4 KiB
C

/* ehci-msm.c - HSUSB Host Controller Driver Implementation
*
* Copyright (c) 2008-2011, Code Aurora Forum. All rights reserved.
*
* Partly derived from ehci-fsl.c and ehci-hcd.c
* Copyright (c) 2000-2004 by David Brownell
* Copyright (c) 2005 MontaVista Software
*
* All source code in this file is licensed under the following license except
* where indicated.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
*
* See the GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, you can find it at http://www.fsf.org
*/
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/usb/otg.h>
#include <linux/usb/msm_hsusb_hw.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/acpi.h>
#include "ehci.h"
#define MSM_USB_BASE (hcd->regs)
#define DRIVER_DESC "Qualcomm On-Chip EHCI Host Controller"
static const char hcd_name[] = "ehci-msm";
static struct hc_driver __read_mostly msm_hc_driver;
static int ehci_msm_reset(struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
int retval;
ehci->caps = USB_CAPLENGTH;
hcd->has_tt = 1;
retval = ehci_setup(hcd);
if (retval)
return retval;
/* select ULPI phy and clear other status/control bits in PORTSC */
writel(PORTSC_PTS_ULPI, USB_PORTSC);
/* bursts of unspecified length. */
writel(0, USB_AHBBURST);
/* Use the AHB transactor, allow posted data writes */
writel(0x8, USB_AHBMODE);
/* Disable streaming mode and select host mode */
writel(0x13, USB_USBMODE);
/* Disable ULPI_TX_PKT_EN_CLR_FIX which is valid only for HSIC */
writel(readl(USB_GENCONFIG_2) & ~ULPI_TX_PKT_EN_CLR_FIX, USB_GENCONFIG_2);
return 0;
}
static int ehci_msm_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
struct resource *res;
struct usb_phy *phy;
int ret;
dev_dbg(&pdev->dev, "ehci_msm proble\n");
hcd = usb_create_hcd(&msm_hc_driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
dev_err(&pdev->dev, "Unable to create HCD\n");
return -ENOMEM;
}
ret = platform_get_irq(pdev, 0);
if (ret < 0) {
dev_err(&pdev->dev, "Unable to get IRQ resource\n");
goto put_hcd;
}
hcd->irq = ret;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Unable to get memory resource\n");
ret = -ENODEV;
goto put_hcd;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
hcd->regs = devm_ioremap(&pdev->dev, hcd->rsrc_start, hcd->rsrc_len);
if (!hcd->regs) {
dev_err(&pdev->dev, "ioremap failed\n");
ret = -ENOMEM;
goto put_hcd;
}
/*
* If there is an OTG driver, let it take care of PHY initialization,
* clock management, powering up VBUS, mapping of registers address
* space and power management.
*/
if (pdev->dev.of_node)
phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
else
phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
if (IS_ERR(phy)) {
if (PTR_ERR(phy) == -EPROBE_DEFER) {
dev_err(&pdev->dev, "unable to find transceiver\n");
ret = -EPROBE_DEFER;
goto put_hcd;
}
phy = NULL;
}
hcd->usb_phy = phy;
device_init_wakeup(&pdev->dev, 1);
if (phy && phy->otg) {
/*
* MSM OTG driver takes care of adding the HCD and
* placing hardware into low power mode via runtime PM.
*/
ret = otg_set_host(phy->otg, &hcd->self);
if (ret < 0) {
dev_err(&pdev->dev, "unable to register with transceiver\n");
goto put_hcd;
}
pm_runtime_no_callbacks(&pdev->dev);
pm_runtime_enable(&pdev->dev);
} else {
ret = usb_add_hcd(hcd, hcd->irq, IRQF_SHARED);
if (ret)
goto put_hcd;
}
return 0;
put_hcd:
usb_put_hcd(hcd);
return ret;
}
static int ehci_msm_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
device_init_wakeup(&pdev->dev, 0);
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
if (hcd->usb_phy && hcd->usb_phy->otg)
otg_set_host(hcd->usb_phy->otg, NULL);
else
usb_remove_hcd(hcd);
usb_put_hcd(hcd);
return 0;
}
#ifdef CONFIG_PM
static int ehci_msm_pm_suspend(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
bool do_wakeup = device_may_wakeup(dev);
dev_dbg(dev, "ehci-msm PM suspend\n");
/* Only call ehci_suspend if ehci_setup has been done */
if (ehci->sbrn)
return ehci_suspend(hcd, do_wakeup);
return 0;
}
static int ehci_msm_pm_resume(struct device *dev)
{
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
dev_dbg(dev, "ehci-msm PM resume\n");
/* Only call ehci_resume if ehci_setup has been done */
if (ehci->sbrn)
ehci_resume(hcd, false);
return 0;
}
#else
#define ehci_msm_pm_suspend NULL
#define ehci_msm_pm_resume NULL
#endif
static const struct dev_pm_ops ehci_msm_dev_pm_ops = {
.suspend = ehci_msm_pm_suspend,
.resume = ehci_msm_pm_resume,
};
static const struct acpi_device_id msm_ehci_acpi_ids[] = {
{ "QCOM8040", 0 },
{ }
};
MODULE_DEVICE_TABLE(acpi, msm_ehci_acpi_ids);
static const struct of_device_id msm_ehci_dt_match[] = {
{ .compatible = "qcom,ehci-host", },
{}
};
MODULE_DEVICE_TABLE(of, msm_ehci_dt_match);
static struct platform_driver ehci_msm_driver = {
.probe = ehci_msm_probe,
.remove = ehci_msm_remove,
.shutdown = usb_hcd_platform_shutdown,
.driver = {
.name = "msm_hsusb_host",
.pm = &ehci_msm_dev_pm_ops,
.of_match_table = msm_ehci_dt_match,
.acpi_match_table = ACPI_PTR(msm_ehci_acpi_ids),
},
};
static const struct ehci_driver_overrides msm_overrides __initconst = {
.reset = ehci_msm_reset,
};
static int __init ehci_msm_init(void)
{
if (usb_disabled())
return -ENODEV;
pr_info("%s: " DRIVER_DESC "\n", hcd_name);
ehci_init_driver(&msm_hc_driver, &msm_overrides);
return platform_driver_register(&ehci_msm_driver);
}
module_init(ehci_msm_init);
static void __exit ehci_msm_cleanup(void)
{
platform_driver_unregister(&ehci_msm_driver);
}
module_exit(ehci_msm_cleanup);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_ALIAS("platform:msm-ehci");
MODULE_LICENSE("GPL");