2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 03:33:59 +08:00
linux-next/include/linux/mlx4/cmd.h
Jack Morgenstein d0d68b8693 IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144
The Node Description cannot be changed via MADs (it is read-only).
Until now, it was changed in the driver via sysfs, and the new Node
Description was simply inserted by the driver into MAD responses
(replacing the description returned by FW).

System startup scripts use the sysfs interface to change the node
description at driver startup to show the hostname, etc. However, this
has a race condition: the SM could discover the original FW node
description rather than the system-specific description if it queried the
port before the startup scripts finish running.

For mlx4, we fix this with a new FW command (SET_NODE) that allows
passing the new node description to FW.  When this command is invoked,
FW sends a trap 144 to the SM.  When it gets this trap, the SM can
query the node to obtain the new node description -- thus eliminating
the effects of the race.

This patch simply calls SET_NODE command when a new node description
is entered via sysfs (thus causing trap 144 to be issued by the FW).
We ignore all failures of the SET_NODE command (including those caused
by using a device FW that predates the SET_NODE command), since in
that case things work just as before.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-23 13:53:09 -07:00

191 lines
5.4 KiB
C

/*
* Copyright (c) 2006 Cisco Systems, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef MLX4_CMD_H
#define MLX4_CMD_H
#include <linux/dma-mapping.h>
enum {
/* initialization and general commands */
MLX4_CMD_SYS_EN = 0x1,
MLX4_CMD_SYS_DIS = 0x2,
MLX4_CMD_MAP_FA = 0xfff,
MLX4_CMD_UNMAP_FA = 0xffe,
MLX4_CMD_RUN_FW = 0xff6,
MLX4_CMD_MOD_STAT_CFG = 0x34,
MLX4_CMD_QUERY_DEV_CAP = 0x3,
MLX4_CMD_QUERY_FW = 0x4,
MLX4_CMD_ENABLE_LAM = 0xff8,
MLX4_CMD_DISABLE_LAM = 0xff7,
MLX4_CMD_QUERY_DDR = 0x5,
MLX4_CMD_QUERY_ADAPTER = 0x6,
MLX4_CMD_INIT_HCA = 0x7,
MLX4_CMD_CLOSE_HCA = 0x8,
MLX4_CMD_INIT_PORT = 0x9,
MLX4_CMD_CLOSE_PORT = 0xa,
MLX4_CMD_QUERY_HCA = 0xb,
MLX4_CMD_QUERY_PORT = 0x43,
MLX4_CMD_SENSE_PORT = 0x4d,
MLX4_CMD_SET_PORT = 0xc,
MLX4_CMD_SET_NODE = 0x5a,
MLX4_CMD_ACCESS_DDR = 0x2e,
MLX4_CMD_MAP_ICM = 0xffa,
MLX4_CMD_UNMAP_ICM = 0xff9,
MLX4_CMD_MAP_ICM_AUX = 0xffc,
MLX4_CMD_UNMAP_ICM_AUX = 0xffb,
MLX4_CMD_SET_ICM_SIZE = 0xffd,
/* TPT commands */
MLX4_CMD_SW2HW_MPT = 0xd,
MLX4_CMD_QUERY_MPT = 0xe,
MLX4_CMD_HW2SW_MPT = 0xf,
MLX4_CMD_READ_MTT = 0x10,
MLX4_CMD_WRITE_MTT = 0x11,
MLX4_CMD_SYNC_TPT = 0x2f,
/* EQ commands */
MLX4_CMD_MAP_EQ = 0x12,
MLX4_CMD_SW2HW_EQ = 0x13,
MLX4_CMD_HW2SW_EQ = 0x14,
MLX4_CMD_QUERY_EQ = 0x15,
/* CQ commands */
MLX4_CMD_SW2HW_CQ = 0x16,
MLX4_CMD_HW2SW_CQ = 0x17,
MLX4_CMD_QUERY_CQ = 0x18,
MLX4_CMD_MODIFY_CQ = 0x2c,
/* SRQ commands */
MLX4_CMD_SW2HW_SRQ = 0x35,
MLX4_CMD_HW2SW_SRQ = 0x36,
MLX4_CMD_QUERY_SRQ = 0x37,
MLX4_CMD_ARM_SRQ = 0x40,
/* QP/EE commands */
MLX4_CMD_RST2INIT_QP = 0x19,
MLX4_CMD_INIT2RTR_QP = 0x1a,
MLX4_CMD_RTR2RTS_QP = 0x1b,
MLX4_CMD_RTS2RTS_QP = 0x1c,
MLX4_CMD_SQERR2RTS_QP = 0x1d,
MLX4_CMD_2ERR_QP = 0x1e,
MLX4_CMD_RTS2SQD_QP = 0x1f,
MLX4_CMD_SQD2SQD_QP = 0x38,
MLX4_CMD_SQD2RTS_QP = 0x20,
MLX4_CMD_2RST_QP = 0x21,
MLX4_CMD_QUERY_QP = 0x22,
MLX4_CMD_INIT2INIT_QP = 0x2d,
MLX4_CMD_SUSPEND_QP = 0x32,
MLX4_CMD_UNSUSPEND_QP = 0x33,
/* special QP and management commands */
MLX4_CMD_CONF_SPECIAL_QP = 0x23,
MLX4_CMD_MAD_IFC = 0x24,
/* multicast commands */
MLX4_CMD_READ_MCG = 0x25,
MLX4_CMD_WRITE_MCG = 0x26,
MLX4_CMD_MGID_HASH = 0x27,
/* miscellaneous commands */
MLX4_CMD_DIAG_RPRT = 0x30,
MLX4_CMD_NOP = 0x31,
/* debug commands */
MLX4_CMD_QUERY_DEBUG_MSG = 0x2a,
MLX4_CMD_SET_DEBUG_MSG = 0x2b,
};
enum {
MLX4_CMD_TIME_CLASS_A = 10000,
MLX4_CMD_TIME_CLASS_B = 10000,
MLX4_CMD_TIME_CLASS_C = 10000,
};
enum {
MLX4_MAILBOX_SIZE = 4096
};
enum {
/* set port opcode modifiers */
MLX4_SET_PORT_GENERAL = 0x0,
MLX4_SET_PORT_RQP_CALC = 0x1,
MLX4_SET_PORT_MAC_TABLE = 0x2,
MLX4_SET_PORT_VLAN_TABLE = 0x3,
MLX4_SET_PORT_PRIO_MAP = 0x4,
};
struct mlx4_dev;
struct mlx4_cmd_mailbox {
void *buf;
dma_addr_t dma;
};
int __mlx4_cmd(struct mlx4_dev *dev, u64 in_param, u64 *out_param,
int out_is_imm, u32 in_modifier, u8 op_modifier,
u16 op, unsigned long timeout);
/* Invoke a command with no output parameter */
static inline int mlx4_cmd(struct mlx4_dev *dev, u64 in_param, u32 in_modifier,
u8 op_modifier, u16 op, unsigned long timeout)
{
return __mlx4_cmd(dev, in_param, NULL, 0, in_modifier,
op_modifier, op, timeout);
}
/* Invoke a command with an output mailbox */
static inline int mlx4_cmd_box(struct mlx4_dev *dev, u64 in_param, u64 out_param,
u32 in_modifier, u8 op_modifier, u16 op,
unsigned long timeout)
{
return __mlx4_cmd(dev, in_param, &out_param, 0, in_modifier,
op_modifier, op, timeout);
}
/*
* Invoke a command with an immediate output parameter (and copy the
* output into the caller's out_param pointer after the command
* executes).
*/
static inline int mlx4_cmd_imm(struct mlx4_dev *dev, u64 in_param, u64 *out_param,
u32 in_modifier, u8 op_modifier, u16 op,
unsigned long timeout)
{
return __mlx4_cmd(dev, in_param, out_param, 1, in_modifier,
op_modifier, op, timeout);
}
struct mlx4_cmd_mailbox *mlx4_alloc_cmd_mailbox(struct mlx4_dev *dev);
void mlx4_free_cmd_mailbox(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *mailbox);
#endif /* MLX4_CMD_H */