2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 15:13:55 +08:00
linux-next/drivers/spi/spi-dw-pci.c
Andy Shevchenko d9c14743a3 spi: dw-mid: get a proper clock frequency for SPI2
The clock information is being kept in the custom register on Intel MID
platforms. Each controller has its own dedicated custom register for that.
Thus, to get a proper frequency we have to read value from the specific offset
to the register block. This patch makes this happen.

Fixes: d58cf5ff65 (spi: dw-pci: describe Intel MID controllers better)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-27 12:04:29 +00:00

165 lines
3.7 KiB
C

/*
* PCI interface driver for DW SPI Core
*
* Copyright (c) 2009, 2014 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*/
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
#include <linux/module.h>
#include "spi-dw.h"
#define DRIVER_NAME "dw_spi_pci"
struct dw_spi_pci {
struct pci_dev *pdev;
struct dw_spi dws;
};
struct spi_pci_desc {
int (*setup)(struct dw_spi *);
u16 num_cs;
u16 bus_num;
};
static struct spi_pci_desc spi_pci_mid_desc_1 = {
.setup = dw_spi_mid_init,
.num_cs = 32,
.bus_num = 0,
};
static struct spi_pci_desc spi_pci_mid_desc_2 = {
.setup = dw_spi_mid_init,
.num_cs = 4,
.bus_num = 1,
};
static int spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct dw_spi_pci *dwpci;
struct dw_spi *dws;
struct spi_pci_desc *desc = (struct spi_pci_desc *)ent->driver_data;
int pci_bar = 0;
int ret;
ret = pcim_enable_device(pdev);
if (ret)
return ret;
dwpci = devm_kzalloc(&pdev->dev, sizeof(struct dw_spi_pci),
GFP_KERNEL);
if (!dwpci)
return -ENOMEM;
dwpci->pdev = pdev;
dws = &dwpci->dws;
/* Get basic io resource and map it */
dws->paddr = pci_resource_start(pdev, pci_bar);
ret = pcim_iomap_regions(pdev, 1 << pci_bar, pci_name(pdev));
if (ret)
return ret;
dws->regs = pcim_iomap_table(pdev)[pci_bar];
dws->irq = pdev->irq;
/*
* Specific handling for paltforms, like dma setup,
* clock rate, FIFO depth.
*/
if (desc) {
dws->num_cs = desc->num_cs;
dws->bus_num = desc->bus_num;
if (desc->setup) {
ret = desc->setup(dws);
if (ret)
return ret;
}
} else {
return -ENODEV;
}
ret = dw_spi_add_host(&pdev->dev, dws);
if (ret)
return ret;
/* PCI hook and SPI hook use the same drv data */
pci_set_drvdata(pdev, dwpci);
dev_info(&pdev->dev, "found PCI SPI controller(ID: %04x:%04x)\n",
pdev->vendor, pdev->device);
return 0;
}
static void spi_pci_remove(struct pci_dev *pdev)
{
struct dw_spi_pci *dwpci = pci_get_drvdata(pdev);
dw_spi_remove_host(&dwpci->dws);
}
#ifdef CONFIG_PM_SLEEP
static int spi_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct dw_spi_pci *dwpci = pci_get_drvdata(pdev);
return dw_spi_suspend_host(&dwpci->dws);
}
static int spi_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct dw_spi_pci *dwpci = pci_get_drvdata(pdev);
return dw_spi_resume_host(&dwpci->dws);
}
#endif
static SIMPLE_DEV_PM_OPS(dw_spi_pm_ops, spi_suspend, spi_resume);
static const struct pci_device_id pci_ids[] = {
/* Intel MID platform SPI controller 0 */
/*
* The access to the device 8086:0801 is disabled by HW, since it's
* exclusively used by SCU to communicate with MSIC.
*/
/* Intel MID platform SPI controller 1 */
{ PCI_VDEVICE(INTEL, 0x0800), (kernel_ulong_t)&spi_pci_mid_desc_1},
/* Intel MID platform SPI controller 2 */
{ PCI_VDEVICE(INTEL, 0x0812), (kernel_ulong_t)&spi_pci_mid_desc_2},
{},
};
static struct pci_driver dw_spi_driver = {
.name = DRIVER_NAME,
.id_table = pci_ids,
.probe = spi_pci_probe,
.remove = spi_pci_remove,
.driver = {
.pm = &dw_spi_pm_ops,
},
};
module_pci_driver(dw_spi_driver);
MODULE_AUTHOR("Feng Tang <feng.tang@intel.com>");
MODULE_DESCRIPTION("PCI interface driver for DW SPI Core");
MODULE_LICENSE("GPL v2");