renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
Code
d04a6edfed
linux-next/drivers/scsi/mpt3sas/mpt3sas_ctl.c
Sreekanth Reddy d04a6edfed scsi: mpt3sas: Register trace buffer based on NVDATA settings 
Currently if user wishes to enable the host trace buffer during driver load
time, then user has to load the driver with module parameter
'diag_buffer_enable' set to one.

Alternatively now the user can enable host trace buffer by enabling the
following fields in manufacturing page11 in NVDATA (nvdata xml is used
while building HBA firmware image):

 * HostTraceBufferMaxSizeKB - Maximum trace buffer size in KB that host can
                              allocate,

 * HostTraceBufferMinSizeKB - Minimum trace buffer size in KB atleast host
                              should allocate,

 * HostTraceBufferDecrementSizeKB - size by which host can reduce from
                              buffer size and retry the buffer allocation
                              when buffer allocation failed with previous
                              calculated buffer size.

The driver will register the trace buffer automatically without any module
parameter during boot time when above fields are enabled in manufacturing
page11 in HBA firmware.

Driver follows the following algorithm for enabling the host trace buffer
during driver load time:

* If user has loaded the driver with module parameter 'diag_buffer_enable'
  set to one, then driver allocates 2MB buffer and registers this buffer
  with HBA firmware for capturing the firmware trace logs.

* Else driver reads manufacture page11 data and checks whether
  HostTraceBufferMaxSizeKB filed is zero or not?

  - If HostTraceBufferMaxSizeKB is non-zero then driver tries to allocate
    HostTraceBufferMaxSizeKB size of memory. If the buffer allocation is
    successful, then it will register this buffer with HBA firmware, else
    in a loop the driver will try again by reducing the current buffer size
    with HostTraceBufferDecrementSizeKB size until memory allocation is
    successful or buffer size falls below HostTraceBufferMinSizeKB. If the
    memory allocation is successful, then the buffer will be registered
    with the firmware. Else, if the buffer size falls below the
    HostTraceBufferMinSizeKB, then driver won't register trace buffer with
    HBA firmware.

  - If HostTraceBufferMaxSizeKB is zero, then driver won't register trace
    buffer with HBA firmware.

Link: https://lore.kernel.org/r/1568379890-18347-2-git-send-email-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-30 22:32:46 -04:00

3789 lines
104 KiB
C
Raw Blame History

/*
* Management Module Support for MPT (Message Passing Technology) based
* controllers
*
* This code is based on drivers/scsi/mpt3sas/mpt3sas_ctl.c
* Copyright (C) 2012-2014 LSI Corporation
* Copyright (C) 2013-2014 Avago Technologies
* (mailto: MPT-FusionLinux.pdl@avagotech.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* NO WARRANTY
* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
* solely responsible for determining the appropriateness of using and
* distributing the Program and assumes all risks associated with its
* exercise of rights under this Agreement, including but not limited to
* the risks and costs of program errors, damage to or loss of data,
* programs or equipment, and unavailability or interruption of operations.
* DISCLAIMER OF LIABILITY
* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
* USA.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/compat.h>
#include <linux/poll.h>
#include <linux/io.h>
#include <linux/uaccess.h>
#include "mpt3sas_base.h"
#include "mpt3sas_ctl.h"
static struct fasync_struct *async_queue;
static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait);
/**
* enum block_state - blocking state
* @NON_BLOCKING: non blocking
* @BLOCKING: blocking
*
* These states are for ioctls that need to wait for a response
* from firmware, so they probably require sleep.
*/
enum block_state {
NON_BLOCKING,
BLOCKING,
};
/**
* _ctl_display_some_debug - debug routine
* @ioc: per adapter object
* @smid: system request message index
* @calling_function_name: string pass from calling function
* @mpi_reply: reply message frame
* Context: none.
*
* Function for displaying debug info helpful when debugging issues
* in this module.
*/
static void
_ctl_display_some_debug(struct MPT3SAS_ADAPTER *ioc, u16 smid,
char *calling_function_name, MPI2DefaultReply_t *mpi_reply)
{
Mpi2ConfigRequest_t *mpi_request;
char *desc = NULL;
if (!(ioc->logging_level & MPT_DEBUG_IOCTL))
return;
mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
switch (mpi_request->Function) {
case MPI2_FUNCTION_SCSI_IO_REQUEST:
{
Mpi2SCSIIORequest_t *scsi_request =
(Mpi2SCSIIORequest_t *)mpi_request;
snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
"scsi_io, cmd(0x%02x), cdb_len(%d)",
scsi_request->CDB.CDB32[0],
le16_to_cpu(scsi_request->IoFlags) & 0xF);
desc = ioc->tmp_string;
break;
}
case MPI2_FUNCTION_SCSI_TASK_MGMT:
desc = "task_mgmt";
break;
case MPI2_FUNCTION_IOC_INIT:
desc = "ioc_init";
break;
case MPI2_FUNCTION_IOC_FACTS:
desc = "ioc_facts";
break;
case MPI2_FUNCTION_CONFIG:
{
Mpi2ConfigRequest_t *config_request =
(Mpi2ConfigRequest_t *)mpi_request;
snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
"config, type(0x%02x), ext_type(0x%02x), number(%d)",
(config_request->Header.PageType &
MPI2_CONFIG_PAGETYPE_MASK), config_request->ExtPageType,
config_request->Header.PageNumber);
desc = ioc->tmp_string;
break;
}
case MPI2_FUNCTION_PORT_FACTS:
desc = "port_facts";
break;
case MPI2_FUNCTION_PORT_ENABLE:
desc = "port_enable";
break;
case MPI2_FUNCTION_EVENT_NOTIFICATION:
desc = "event_notification";
break;
case MPI2_FUNCTION_FW_DOWNLOAD:
desc = "fw_download";
break;
case MPI2_FUNCTION_FW_UPLOAD:
desc = "fw_upload";
break;
case MPI2_FUNCTION_RAID_ACTION:
desc = "raid_action";
break;
case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
{
Mpi2SCSIIORequest_t *scsi_request =
(Mpi2SCSIIORequest_t *)mpi_request;
snprintf(ioc->tmp_string, MPT_STRING_LENGTH,
"raid_pass, cmd(0x%02x), cdb_len(%d)",
scsi_request->CDB.CDB32[0],
le16_to_cpu(scsi_request->IoFlags) & 0xF);
desc = ioc->tmp_string;
break;
}
case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
desc = "sas_iounit_cntl";
break;
case MPI2_FUNCTION_SATA_PASSTHROUGH:
desc = "sata_pass";
break;
case MPI2_FUNCTION_DIAG_BUFFER_POST:
desc = "diag_buffer_post";
break;
case MPI2_FUNCTION_DIAG_RELEASE:
desc = "diag_release";
break;
case MPI2_FUNCTION_SMP_PASSTHROUGH:
desc = "smp_passthrough";
break;
}
if (!desc)
return;
ioc_info(ioc, "%s: %s, smid(%d)\n", calling_function_name, desc, smid);
if (!mpi_reply)
return;
if (mpi_reply->IOCStatus || mpi_reply->IOCLogInfo)
ioc_info(ioc, "\tiocstatus(0x%04x), loginfo(0x%08x)\n",
le16_to_cpu(mpi_reply->IOCStatus),
le32_to_cpu(mpi_reply->IOCLogInfo));
if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
mpi_request->Function ==
MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
Mpi2SCSIIOReply_t *scsi_reply =
(Mpi2SCSIIOReply_t *)mpi_reply;
struct _sas_device *sas_device = NULL;
struct _pcie_device *pcie_device = NULL;
sas_device = mpt3sas_get_sdev_by_handle(ioc,
le16_to_cpu(scsi_reply->DevHandle));
if (sas_device) {
ioc_warn(ioc, "\tsas_address(0x%016llx), phy(%d)\n",
(u64)sas_device->sas_address,
sas_device->phy);
ioc_warn(ioc, "\tenclosure_logical_id(0x%016llx), slot(%d)\n",
(u64)sas_device->enclosure_logical_id,
sas_device->slot);
sas_device_put(sas_device);
}
if (!sas_device) {
pcie_device = mpt3sas_get_pdev_by_handle(ioc,
le16_to_cpu(scsi_reply->DevHandle));
if (pcie_device) {
ioc_warn(ioc, "\tWWID(0x%016llx), port(%d)\n",
(unsigned long long)pcie_device->wwid,
pcie_device->port_num);
if (pcie_device->enclosure_handle != 0)
ioc_warn(ioc, "\tenclosure_logical_id(0x%016llx), slot(%d)\n",
(u64)pcie_device->enclosure_logical_id,
pcie_device->slot);
pcie_device_put(pcie_device);
}
}
if (scsi_reply->SCSIState || scsi_reply->SCSIStatus)
ioc_info(ioc, "\tscsi_state(0x%02x), scsi_status(0x%02x)\n",
scsi_reply->SCSIState,
scsi_reply->SCSIStatus);
}
}
/**
* mpt3sas_ctl_done - ctl module completion routine
* @ioc: per adapter object
* @smid: system request message index
* @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
* Context: none.
*
* The callback handler when using ioc->ctl_cb_idx.
*
* Return: 1 meaning mf should be freed from _base_interrupt
* 0 means the mf is freed from this function.
*/
u8
mpt3sas_ctl_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
u32 reply)
{
MPI2DefaultReply_t *mpi_reply;
Mpi2SCSIIOReply_t *scsiio_reply;
Mpi26NVMeEncapsulatedErrorReply_t *nvme_error_reply;
const void *sense_data;
u32 sz;
if (ioc->ctl_cmds.status == MPT3_CMD_NOT_USED)
return 1;
if (ioc->ctl_cmds.smid != smid)
return 1;
ioc->ctl_cmds.status |= MPT3_CMD_COMPLETE;
mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
if (mpi_reply) {
memcpy(ioc->ctl_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
ioc->ctl_cmds.status |= MPT3_CMD_REPLY_VALID;
/* get sense data */
if (mpi_reply->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
mpi_reply->Function ==
MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH) {
scsiio_reply = (Mpi2SCSIIOReply_t *)mpi_reply;
if (scsiio_reply->SCSIState &
MPI2_SCSI_STATE_AUTOSENSE_VALID) {
sz = min_t(u32, SCSI_SENSE_BUFFERSIZE,
le32_to_cpu(scsiio_reply->SenseCount));
sense_data = mpt3sas_base_get_sense_buffer(ioc,
smid);
memcpy(ioc->ctl_cmds.sense, sense_data, sz);
}
}
/*
* Get Error Response data for NVMe device. The ctl_cmds.sense
* buffer is used to store the Error Response data.
*/
if (mpi_reply->Function == MPI2_FUNCTION_NVME_ENCAPSULATED) {
nvme_error_reply =
(Mpi26NVMeEncapsulatedErrorReply_t *)mpi_reply;
sz = min_t(u32, NVME_ERROR_RESPONSE_SIZE,
le16_to_cpu(nvme_error_reply->ErrorResponseCount));
sense_data = mpt3sas_base_get_sense_buffer(ioc, smid);
memcpy(ioc->ctl_cmds.sense, sense_data, sz);
}
}
_ctl_display_some_debug(ioc, smid, "ctl_done", mpi_reply);
ioc->ctl_cmds.status &= ~MPT3_CMD_PENDING;
complete(&ioc->ctl_cmds.done);
return 1;
}
/**
* _ctl_check_event_type - determines when an event needs logging
* @ioc: per adapter object
* @event: firmware event
*
* The bitmask in ioc->event_type[] indicates which events should be
* be saved in the driver event_log. This bitmask is set by application.
*
* Return: 1 when event should be captured, or zero means no match.
*/
static int
_ctl_check_event_type(struct MPT3SAS_ADAPTER *ioc, u16 event)
{
u16 i;
u32 desired_event;
if (event >= 128 || !event || !ioc->event_log)
return 0;
desired_event = (1 << (event % 32));
if (!desired_event)
desired_event = 1;
i = event / 32;
return desired_event & ioc->event_type[i];
}
/**
* mpt3sas_ctl_add_to_event_log - add event
* @ioc: per adapter object
* @mpi_reply: reply message frame
*/
void
mpt3sas_ctl_add_to_event_log(struct MPT3SAS_ADAPTER *ioc,
Mpi2EventNotificationReply_t *mpi_reply)
{
struct MPT3_IOCTL_EVENTS *event_log;
u16 event;
int i;
u32 sz, event_data_sz;
u8 send_aen = 0;
if (!ioc->event_log)
return;
event = le16_to_cpu(mpi_reply->Event);
if (_ctl_check_event_type(ioc, event)) {
/* insert entry into circular event_log */
i = ioc->event_context % MPT3SAS_CTL_EVENT_LOG_SIZE;
event_log = ioc->event_log;
event_log[i].event = event;
event_log[i].context = ioc->event_context++;
event_data_sz = le16_to_cpu(mpi_reply->EventDataLength)*4;
sz = min_t(u32, event_data_sz, MPT3_EVENT_DATA_SIZE);
memset(event_log[i].data, 0, MPT3_EVENT_DATA_SIZE);
memcpy(event_log[i].data, mpi_reply->EventData, sz);
send_aen = 1;
}
/* This aen_event_read_flag flag is set until the
* application has read the event log.
* For MPI2_EVENT_LOG_ENTRY_ADDED, we always notify.
*/
if (event == MPI2_EVENT_LOG_ENTRY_ADDED ||
(send_aen && !ioc->aen_event_read_flag)) {
ioc->aen_event_read_flag = 1;
wake_up_interruptible(&ctl_poll_wait);
if (async_queue)
kill_fasync(&async_queue, SIGIO, POLL_IN);
}
}
/**
* mpt3sas_ctl_event_callback - firmware event handler (called at ISR time)
* @ioc: per adapter object
* @msix_index: MSIX table index supplied by the OS
* @reply: reply message frame(lower 32bit addr)
* Context: interrupt.
*
* This function merely adds a new work task into ioc->firmware_event_thread.
* The tasks are worked from _firmware_event_work in user context.
*
* Return: 1 meaning mf should be freed from _base_interrupt
* 0 means the mf is freed from this function.
*/
u8
mpt3sas_ctl_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
u32 reply)
{
Mpi2EventNotificationReply_t *mpi_reply;
mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
if (mpi_reply)
mpt3sas_ctl_add_to_event_log(ioc, mpi_reply);
return 1;
}
/**
* _ctl_verify_adapter - validates ioc_number passed from application
* @ioc_number: ?
* @iocpp: The ioc pointer is returned in this.
* @mpi_version: will be MPI2_VERSION for mpt2ctl ioctl device &
* MPI25_VERSION | MPI26_VERSION for mpt3ctl ioctl device.
*
* Return: (-1) means error, else ioc_number.
*/
static int
_ctl_verify_adapter(int ioc_number, struct MPT3SAS_ADAPTER **iocpp,
int mpi_version)
{
struct MPT3SAS_ADAPTER *ioc;
int version = 0;
/* global ioc lock to protect controller on list operations */
spin_lock(&gioc_lock);
list_for_each_entry(ioc, &mpt3sas_ioc_list, list) {
if (ioc->id != ioc_number)
continue;
/* Check whether this ioctl command is from right
* ioctl device or not, if not continue the search.
*/
version = ioc->hba_mpi_version_belonged;
/* MPI25_VERSION and MPI26_VERSION uses same ioctl
* device.
*/
if (mpi_version == (MPI25_VERSION | MPI26_VERSION)) {
if ((version == MPI25_VERSION) ||
(version == MPI26_VERSION))
goto out;
else
continue;
} else {
if (version != mpi_version)
continue;
}
out:
spin_unlock(&gioc_lock);
*iocpp = ioc;
return ioc_number;
}
spin_unlock(&gioc_lock);
*iocpp = NULL;
return -1;
}
/**
* mpt3sas_ctl_reset_handler - reset callback handler (for ctl)
* @ioc: per adapter object
*
* The handler for doing any required cleanup or initialization.
*/
void mpt3sas_ctl_pre_reset_handler(struct MPT3SAS_ADAPTER *ioc)
{
int i;
u8 issue_reset;
dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_PRE_RESET\n", __func__));
for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
if (!(ioc->diag_buffer_status[i] &
MPT3_DIAG_BUFFER_IS_REGISTERED))
continue;
if ((ioc->diag_buffer_status[i] &
MPT3_DIAG_BUFFER_IS_RELEASED))
continue;
mpt3sas_send_diag_release(ioc, i, &issue_reset);
}
}
/**
* mpt3sas_ctl_reset_handler - reset callback handler (for ctl)
* @ioc: per adapter object
*
* The handler for doing any required cleanup or initialization.
*/
void mpt3sas_ctl_after_reset_handler(struct MPT3SAS_ADAPTER *ioc)
{
dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_AFTER_RESET\n", __func__));
if (ioc->ctl_cmds.status & MPT3_CMD_PENDING) {
ioc->ctl_cmds.status |= MPT3_CMD_RESET;
mpt3sas_base_free_smid(ioc, ioc->ctl_cmds.smid);
complete(&ioc->ctl_cmds.done);
}
}
/**
* mpt3sas_ctl_reset_handler - reset callback handler (for ctl)
* @ioc: per adapter object
*
* The handler for doing any required cleanup or initialization.
*/
void mpt3sas_ctl_reset_done_handler(struct MPT3SAS_ADAPTER *ioc)
{
int i;
dtmprintk(ioc, ioc_info(ioc, "%s: MPT3_IOC_DONE_RESET\n", __func__));
for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
if (!(ioc->diag_buffer_status[i] &
MPT3_DIAG_BUFFER_IS_REGISTERED))
continue;
if ((ioc->diag_buffer_status[i] &
MPT3_DIAG_BUFFER_IS_RELEASED))
continue;
ioc->diag_buffer_status[i] |=
MPT3_DIAG_BUFFER_IS_DIAG_RESET;
}
}
/**
* _ctl_fasync -
* @fd: ?
* @filep: ?
* @mode: ?
*
* Called when application request fasyn callback handler.
*/
static int
_ctl_fasync(int fd, struct file *filep, int mode)
{
return fasync_helper(fd, filep, mode, &async_queue);
}
/**
* _ctl_poll -
* @filep: ?
* @wait: ?
*
*/
static __poll_t
_ctl_poll(struct file *filep, poll_table *wait)
{
struct MPT3SAS_ADAPTER *ioc;
poll_wait(filep, &ctl_poll_wait, wait);
/* global ioc lock to protect controller on list operations */
spin_lock(&gioc_lock);
list_for_each_entry(ioc, &mpt3sas_ioc_list, list) {
if (ioc->aen_event_read_flag) {
spin_unlock(&gioc_lock);
return EPOLLIN | EPOLLRDNORM;
}
}
spin_unlock(&gioc_lock);
return 0;
}
/**
* _ctl_set_task_mid - assign an active smid to tm request
* @ioc: per adapter object
* @karg: (struct mpt3_ioctl_command)
* @tm_request: pointer to mf from user space
*
* Return: 0 when an smid if found, else fail.
* during failure, the reply frame is filled.
*/
static int
_ctl_set_task_mid(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command *karg,
Mpi2SCSITaskManagementRequest_t *tm_request)
{
u8 found = 0;
u16 smid;
u16 handle;
struct scsi_cmnd *scmd;
struct MPT3SAS_DEVICE *priv_data;
Mpi2SCSITaskManagementReply_t *tm_reply;
u32 sz;
u32 lun;
char *desc = NULL;
if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
desc = "abort_task";
else if (tm_request->TaskType == MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK)
desc = "query_task";
else
return 0;
lun = scsilun_to_int((struct scsi_lun *)tm_request->LUN);
handle = le16_to_cpu(tm_request->DevHandle);
for (smid = ioc->scsiio_depth; smid && !found; smid--) {
struct scsiio_tracker *st;
scmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid);
if (!scmd)
continue;
if (lun != scmd->device->lun)
continue;
priv_data = scmd->device->hostdata;
if (priv_data->sas_target == NULL)
continue;
if (priv_data->sas_target->handle != handle)
continue;
st = scsi_cmd_priv(scmd);
/*
* If the given TaskMID from the user space is zero, then the
* first outstanding smid will be picked up. Otherwise,
* targeted smid will be the one.
*/
if (!tm_request->TaskMID || tm_request->TaskMID == st->smid) {
tm_request->TaskMID = cpu_to_le16(st->smid);
found = 1;
}
}
if (!found) {
dctlprintk(ioc,
ioc_info(ioc, "%s: handle(0x%04x), lun(%d), no active mid!!\n",
desc, le16_to_cpu(tm_request->DevHandle),
lun));
tm_reply = ioc->ctl_cmds.reply;
tm_reply->DevHandle = tm_request->DevHandle;
tm_reply->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
tm_reply->TaskType = tm_request->TaskType;
tm_reply->MsgLength = sizeof(Mpi2SCSITaskManagementReply_t)/4;
tm_reply->VP_ID = tm_request->VP_ID;
tm_reply->VF_ID = tm_request->VF_ID;
sz = min_t(u32, karg->max_reply_bytes, ioc->reply_sz);
if (copy_to_user(karg->reply_frame_buf_ptr, ioc->ctl_cmds.reply,
sz))
pr_err("failure at %s:%d/%s()!\n", __FILE__,
__LINE__, __func__);
return 1;
}
dctlprintk(ioc,
ioc_info(ioc, "%s: handle(0x%04x), lun(%d), task_mid(%d)\n",
desc, le16_to_cpu(tm_request->DevHandle), lun,
le16_to_cpu(tm_request->TaskMID)));
return 0;
}
/**
* _ctl_do_mpt_command - main handler for MPT3COMMAND opcode
* @ioc: per adapter object
* @karg: (struct mpt3_ioctl_command)
* @mf: pointer to mf in user space
*/
static long
_ctl_do_mpt_command(struct MPT3SAS_ADAPTER *ioc, struct mpt3_ioctl_command karg,
void __user *mf)
{
MPI2RequestHeader_t *mpi_request = NULL, *request;
MPI2DefaultReply_t *mpi_reply;
Mpi26NVMeEncapsulatedRequest_t *nvme_encap_request = NULL;
struct _pcie_device *pcie_device = NULL;
u16 smid;
u8 timeout;
u8 issue_reset;
u32 sz, sz_arg;
void *psge;
void *data_out = NULL;
dma_addr_t data_out_dma = 0;
size_t data_out_sz = 0;
void *data_in = NULL;
dma_addr_t data_in_dma = 0;
size_t data_in_sz = 0;
long ret;
u16 device_handle = MPT3SAS_INVALID_DEVICE_HANDLE;
issue_reset = 0;
if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) {
ioc_err(ioc, "%s: ctl_cmd in use\n", __func__);
ret = -EAGAIN;
goto out;
}
ret = mpt3sas_wait_for_ioc(ioc, IOC_OPERATIONAL_WAIT_COUNT);
if (ret)
goto out;
mpi_request = kzalloc(ioc->request_sz, GFP_KERNEL);
if (!mpi_request) {
ioc_err(ioc, "%s: failed obtaining a memory for mpi_request\n",
__func__);
ret = -ENOMEM;
goto out;
}
/* Check for overflow and wraparound */
if (karg.data_sge_offset * 4 > ioc->request_sz ||
karg.data_sge_offset > (UINT_MAX / 4)) {
ret = -EINVAL;
goto out;
}
/* copy in request message frame from user */
if (copy_from_user(mpi_request, mf, karg.data_sge_offset*4)) {
pr_err("failure at %s:%d/%s()!\n", __FILE__, __LINE__,
__func__);
ret = -EFAULT;
goto out;
}
if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
smid = mpt3sas_base_get_smid_hpr(ioc, ioc->ctl_cb_idx);
if (!smid) {
ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
ret = -EAGAIN;
goto out;
}
} else {
/* Use first reserved smid for passthrough ioctls */
smid = ioc->scsiio_depth - INTERNAL_SCSIIO_CMDS_COUNT + 1;
}
ret = 0;
ioc->ctl_cmds.status = MPT3_CMD_PENDING;
memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
request = mpt3sas_base_get_msg_frame(ioc, smid);
memset(request, 0, ioc->request_sz);
memcpy(request, mpi_request, karg.data_sge_offset*4);
ioc->ctl_cmds.smid = smid;
data_out_sz = karg.data_out_size;
data_in_sz = karg.data_in_size;
if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
mpi_request->Function == MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT ||
mpi_request->Function == MPI2_FUNCTION_SATA_PASSTHROUGH ||
mpi_request->Function == MPI2_FUNCTION_NVME_ENCAPSULATED) {
device_handle = le16_to_cpu(mpi_request->FunctionDependent1);
if (!device_handle || (device_handle >
ioc->facts.MaxDevHandle)) {
ret = -EINVAL;
mpt3sas_base_free_smid(ioc, smid);
goto out;
}
}
/* obtain dma-able memory for data transfer */
if (data_out_sz) /* WRITE */ {
data_out = dma_alloc_coherent(&ioc->pdev->dev, data_out_sz,
&data_out_dma, GFP_KERNEL);
if (!data_out) {
pr_err("failure at %s:%d/%s()!\n", __FILE__,
__LINE__, __func__);
ret = -ENOMEM;
mpt3sas_base_free_smid(ioc, smid);
goto out;
}
if (copy_from_user(data_out, karg.data_out_buf_ptr,
data_out_sz)) {
pr_err("failure at %s:%d/%s()!\n", __FILE__,
__LINE__, __func__);
ret = -EFAULT;
mpt3sas_base_free_smid(ioc, smid);
goto out;
}
}
if (data_in_sz) /* READ */ {
data_in = dma_alloc_coherent(&ioc->pdev->dev, data_in_sz,
&data_in_dma, GFP_KERNEL);
if (!data_in) {
pr_err("failure at %s:%d/%s()!\n", __FILE__,
__LINE__, __func__);
ret = -ENOMEM;
mpt3sas_base_free_smid(ioc, smid);
goto out;
}
}
psge = (void *)request + (karg.data_sge_offset*4);
/* send command to firmware */
_ctl_display_some_debug(ioc, smid, "ctl_request", NULL);
init_completion(&ioc->ctl_cmds.done);
switch (mpi_request->Function) {
case MPI2_FUNCTION_NVME_ENCAPSULATED:
{
nvme_encap_request = (Mpi26NVMeEncapsulatedRequest_t *)request;
/*
* Get the Physical Address of the sense buffer.
* Use Error Response buffer address field to hold the sense
* buffer address.
* Clear the internal sense buffer, which will potentially hold
* the Completion Queue Entry on return, or 0 if no Entry.
* Build the PRPs and set direction bits.
* Send the request.
*/
nvme_encap_request->ErrorResponseBaseAddress =
cpu_to_le64(ioc->sense_dma & 0xFFFFFFFF00000000UL);
nvme_encap_request->ErrorResponseBaseAddress |=
cpu_to_le64(le32_to_cpu(
mpt3sas_base_get_sense_buffer_dma(ioc, smid)));
nvme_encap_request->ErrorResponseAllocationLength =
cpu_to_le16(NVME_ERROR_RESPONSE_SIZE);
memset(ioc->ctl_cmds.sense, 0, NVME_ERROR_RESPONSE_SIZE);
ioc->build_nvme_prp(ioc, smid, nvme_encap_request,
data_out_dma, data_out_sz, data_in_dma, data_in_sz);
if (test_bit(device_handle, ioc->device_remove_in_progress)) {
dtmprintk(ioc,
ioc_info(ioc, "handle(0x%04x): ioctl failed due to device removal in progress\n",
device_handle));
mpt3sas_base_free_smid(ioc, smid);
ret = -EINVAL;
goto out;
}
mpt3sas_base_put_smid_nvme_encap(ioc, smid);
break;
}
case MPI2_FUNCTION_SCSI_IO_REQUEST:
case MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH:
{
Mpi2SCSIIORequest_t *scsiio_request =
(Mpi2SCSIIORequest_t *)request;
scsiio_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
scsiio_request->SenseBufferLowAddress =
mpt3sas_base_get_sense_buffer_dma(ioc, smid);
memset(ioc->ctl_cmds.sense, 0, SCSI_SENSE_BUFFERSIZE);
if (test_bit(device_handle, ioc->device_remove_in_progress)) {
dtmprintk(ioc,
ioc_info(ioc, "handle(0x%04x) :ioctl failed due to device removal in progress\n",
device_handle));
mpt3sas_base_free_smid(ioc, smid);
ret = -EINVAL;
goto out;
}
ioc->build_sg(ioc, psge, data_out_dma, data_out_sz,
data_in_dma, data_in_sz);
if (mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)
ioc->put_smid_scsi_io(ioc, smid, device_handle);
else
ioc->put_smid_default(ioc, smid);
break;
}
case MPI2_FUNCTION_SCSI_TASK_MGMT:
{
Mpi2SCSITaskManagementRequest_t *tm_request =
(Mpi2SCSITaskManagementRequest_t *)request;
dtmprintk(ioc,
ioc_info(ioc, "TASK_MGMT: handle(0x%04x), task_type(0x%02x)\n",
le16_to_cpu(tm_request->DevHandle),
tm_request->TaskType));
ioc->got_task_abort_from_ioctl = 1;
if (tm_request->TaskType ==
MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK ||
tm_request->TaskType ==
MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK) {
if (_ctl_set_task_mid(ioc, &karg, tm_request)) {
mpt3sas_base_free_smid(ioc, smid);
ioc->got_task_abort_from_ioctl = 0;
goto out;
}
}
ioc->got_task_abort_from_ioctl = 0;
if (test_bit(device_handle, ioc->device_remove_in_progress)) {
dtmprintk(ioc,
ioc_info(ioc, "handle(0x%04x) :ioctl failed due to device removal in progress\n",
device_handle));
mpt3sas_base_free_smid(ioc, smid);
ret = -EINVAL;
goto out;
}
mpt3sas_scsih_set_tm_flag(ioc, le16_to_cpu(
tm_request->DevHandle));
ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz,
data_in_dma, data_in_sz);
ioc->put_smid_hi_priority(ioc, smid, 0);
break;
}
case MPI2_FUNCTION_SMP_PASSTHROUGH:
{
Mpi2SmpPassthroughRequest_t *smp_request =
(Mpi2SmpPassthroughRequest_t *)mpi_request;
u8 *data;
/* ioc determines which port to use */
smp_request->PhysicalPort = 0xFF;
if (smp_request->PassthroughFlags &
MPI2_SMP_PT_REQ_PT_FLAGS_IMMEDIATE)
data = (u8 *)&smp_request->SGL;
else {
if (unlikely(data_out == NULL)) {
pr_err("failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
mpt3sas_base_free_smid(ioc, smid);
ret = -EINVAL;
goto out;
}
data = data_out;
}
if (data[1] == 0x91 && (data[10] == 1 || data[10] == 2)) {
ioc->ioc_link_reset_in_progress = 1;
ioc->ignore_loginfos = 1;
}
ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma,
data_in_sz);
ioc->put_smid_default(ioc, smid);
break;
}
case MPI2_FUNCTION_SATA_PASSTHROUGH:
{
if (test_bit(device_handle, ioc->device_remove_in_progress)) {
dtmprintk(ioc,
ioc_info(ioc, "handle(0x%04x) :ioctl failed due to device removal in progress\n",
device_handle));
mpt3sas_base_free_smid(ioc, smid);
ret = -EINVAL;
goto out;
}
ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma,
data_in_sz);
ioc->put_smid_default(ioc, smid);
break;
}
case MPI2_FUNCTION_FW_DOWNLOAD:
case MPI2_FUNCTION_FW_UPLOAD:
{
ioc->build_sg(ioc, psge, data_out_dma, data_out_sz, data_in_dma,
data_in_sz);
ioc->put_smid_default(ioc, smid);
break;
}
case MPI2_FUNCTION_TOOLBOX:
{
Mpi2ToolboxCleanRequest_t *toolbox_request =
(Mpi2ToolboxCleanRequest_t *)mpi_request;
if ((toolbox_request->Tool == MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL)
|| (toolbox_request->Tool ==
MPI26_TOOLBOX_BACKEND_PCIE_LANE_MARGIN))
ioc->build_sg(ioc, psge, data_out_dma, data_out_sz,
data_in_dma, data_in_sz);
else if (toolbox_request->Tool ==
MPI2_TOOLBOX_MEMORY_MOVE_TOOL) {
Mpi2ToolboxMemMoveRequest_t *mem_move_request =
(Mpi2ToolboxMemMoveRequest_t *)request;
Mpi2SGESimple64_t tmp, *src = NULL, *dst = NULL;
ioc->build_sg_mpi(ioc, psge, data_out_dma,
data_out_sz, data_in_dma, data_in_sz);
if (data_out_sz && !data_in_sz) {
dst =
(Mpi2SGESimple64_t *)&mem_move_request->SGL;
src = (void *)dst + ioc->sge_size;
memcpy(&tmp, src, ioc->sge_size);
memcpy(src, dst, ioc->sge_size);
memcpy(dst, &tmp, ioc->sge_size);
}
if (ioc->logging_level & MPT_DEBUG_TM) {
ioc_info(ioc,
"Mpi2ToolboxMemMoveRequest_t request msg\n");
_debug_dump_mf(mem_move_request,
ioc->request_sz/4);
}
} else
ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz,
data_in_dma, data_in_sz);
ioc->put_smid_default(ioc, smid);
break;
}
case MPI2_FUNCTION_SAS_IO_UNIT_CONTROL:
{
Mpi2SasIoUnitControlRequest_t *sasiounit_request =
(Mpi2SasIoUnitControlRequest_t *)mpi_request;
if (sasiounit_request->Operation == MPI2_SAS_OP_PHY_HARD_RESET
|| sasiounit_request->Operation ==
MPI2_SAS_OP_PHY_LINK_RESET) {
ioc->ioc_link_reset_in_progress = 1;
ioc->ignore_loginfos = 1;
}
/* drop to default case for posting the request */
}
/* fall through */
default:
ioc->build_sg_mpi(ioc, psge, data_out_dma, data_out_sz,
data_in_dma, data_in_sz);
ioc->put_smid_default(ioc, smid);
break;
}
if (karg.timeout < MPT3_IOCTL_DEFAULT_TIMEOUT)
timeout = MPT3_IOCTL_DEFAULT_TIMEOUT;
else
timeout = karg.timeout;
wait_for_completion_timeout(&ioc->ctl_cmds.done, timeout*HZ);
if (mpi_request->Function == MPI2_FUNCTION_SCSI_TASK_MGMT) {
Mpi2SCSITaskManagementRequest_t *tm_request =
(Mpi2SCSITaskManagementRequest_t *)mpi_request;
mpt3sas_scsih_clear_tm_flag(ioc, le16_to_cpu(
tm_request->DevHandle));
mpt3sas_trigger_master(ioc, MASTER_TRIGGER_TASK_MANAGMENT);
} else if ((mpi_request->Function == MPI2_FUNCTION_SMP_PASSTHROUGH ||
mpi_request->Function == MPI2_FUNCTION_SAS_IO_UNIT_CONTROL) &&
ioc->ioc_link_reset_in_progress) {
ioc->ioc_link_reset_in_progress = 0;
ioc->ignore_loginfos = 0;
}
if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
issue_reset =
mpt3sas_base_check_cmd_timeout(ioc,
ioc->ctl_cmds.status, mpi_request,
karg.data_sge_offset);
goto issue_host_reset;
}
mpi_reply = ioc->ctl_cmds.reply;
if (mpi_reply->Function == MPI2_FUNCTION_SCSI_TASK_MGMT &&
(ioc->logging_level & MPT_DEBUG_TM)) {
Mpi2SCSITaskManagementReply_t *tm_reply =
(Mpi2SCSITaskManagementReply_t *)mpi_reply;
ioc_info(ioc, "TASK_MGMT: IOCStatus(0x%04x), IOCLogInfo(0x%08x), TerminationCount(0x%08x)\n",
le16_to_cpu(tm_reply->IOCStatus),
le32_to_cpu(tm_reply->IOCLogInfo),
le32_to_cpu(tm_reply->TerminationCount));
}
/* copy out xdata to user */
if (data_in_sz) {
if (copy_to_user(karg.data_in_buf_ptr, data_in,
data_in_sz)) {
pr_err("failure at %s:%d/%s()!\n", __FILE__,
__LINE__, __func__);
ret = -ENODATA;
goto out;
}
}
/* copy out reply message frame to user */
if (karg.max_reply_bytes) {
sz = min_t(u32, karg.max_reply_bytes, ioc->reply_sz);
if (copy_to_user(karg.reply_frame_buf_ptr, ioc->ctl_cmds.reply,
sz)) {
pr_err("failure at %s:%d/%s()!\n", __FILE__,
__LINE__, __func__);
ret = -ENODATA;
goto out;
}
}
/* copy out sense/NVMe Error Response to user */
if (karg.max_sense_bytes && (mpi_request->Function ==
MPI2_FUNCTION_SCSI_IO_REQUEST || mpi_request->Function ==
MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH || mpi_request->Function ==
MPI2_FUNCTION_NVME_ENCAPSULATED)) {
if (karg.sense_data_ptr == NULL) {
ioc_info(ioc, "Response buffer provided by application is NULL; Response data will not be returned\n");
goto out;
}
sz_arg = (mpi_request->Function ==
MPI2_FUNCTION_NVME_ENCAPSULATED) ? NVME_ERROR_RESPONSE_SIZE :
SCSI_SENSE_BUFFERSIZE;
sz = min_t(u32, karg.max_sense_bytes, sz_arg);
if (copy_to_user(karg.sense_data_ptr, ioc->ctl_cmds.sense,
sz)) {
pr_err("failure at %s:%d/%s()!\n", __FILE__,
__LINE__, __func__);
ret = -ENODATA;
goto out;
}
}
issue_host_reset:
if (issue_reset) {
ret = -ENODATA;
if ((mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST ||
mpi_request->Function ==
MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH ||
mpi_request->Function == MPI2_FUNCTION_SATA_PASSTHROUGH)) {
ioc_info(ioc, "issue target reset: handle = (0x%04x)\n",
le16_to_cpu(mpi_request->FunctionDependent1));
mpt3sas_halt_firmware(ioc);
pcie_device = mpt3sas_get_pdev_by_handle(ioc,
le16_to_cpu(mpi_request->FunctionDependent1));
if (pcie_device && (!ioc->tm_custom_handling) &&
(!(mpt3sas_scsih_is_pcie_scsi_device(
pcie_device->device_info))))
mpt3sas_scsih_issue_locked_tm(ioc,
le16_to_cpu(mpi_request->FunctionDependent1),
0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
0, pcie_device->reset_timeout,
MPI26_SCSITASKMGMT_MSGFLAGS_PROTOCOL_LVL_RST_PCIE);
else
mpt3sas_scsih_issue_locked_tm(ioc,
le16_to_cpu(mpi_request->FunctionDependent1),
0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
0, 30, MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET);
} else
mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
}
out:
if (pcie_device)
pcie_device_put(pcie_device);
/* free memory associated with sg buffers */
if (data_in)
dma_free_coherent(&ioc->pdev->dev, data_in_sz, data_in,
data_in_dma);
if (data_out)
dma_free_coherent(&ioc->pdev->dev, data_out_sz, data_out,
data_out_dma);
kfree(mpi_request);
ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
return ret;
}
/**
* _ctl_getiocinfo - main handler for MPT3IOCINFO opcode
* @ioc: per adapter object
* @arg: user space buffer containing ioctl content
*/
static long
_ctl_getiocinfo(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
{
struct mpt3_ioctl_iocinfo karg;
dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
__func__));
memset(&karg, 0 , sizeof(karg));
if (ioc->pfacts)
karg.port_number = ioc->pfacts[0].PortNumber;
karg.hw_rev = ioc->pdev->revision;
karg.pci_id = ioc->pdev->device;
karg.subsystem_device = ioc->pdev->subsystem_device;
karg.subsystem_vendor = ioc->pdev->subsystem_vendor;
karg.pci_information.u.bits.bus = ioc->pdev->bus->number;
karg.pci_information.u.bits.device = PCI_SLOT(ioc->pdev->devfn);
karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn);
karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus);
karg.firmware_version = ioc->facts.FWVersion.Word;
strcpy(karg.driver_version, ioc->driver_name);
strcat(karg.driver_version, "-");
switch (ioc->hba_mpi_version_belonged) {
case MPI2_VERSION:
if (ioc->is_warpdrive)
karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2_SSS6200;
else
karg.adapter_type = MPT2_IOCTL_INTERFACE_SAS2;
strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION);
break;
case MPI25_VERSION:
case MPI26_VERSION:
if (ioc->is_gen35_ioc)
karg.adapter_type = MPT3_IOCTL_INTERFACE_SAS35;
else
karg.adapter_type = MPT3_IOCTL_INTERFACE_SAS3;
strcat(karg.driver_version, MPT3SAS_DRIVER_VERSION);
break;
}
karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
if (copy_to_user(arg, &karg, sizeof(karg))) {
pr_err("failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
return 0;
}
/**
* _ctl_eventquery - main handler for MPT3EVENTQUERY opcode
* @ioc: per adapter object
* @arg: user space buffer containing ioctl content
*/
static long
_ctl_eventquery(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
{
struct mpt3_ioctl_eventquery karg;
if (copy_from_user(&karg, arg, sizeof(karg))) {
pr_err("failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
__func__));
karg.event_entries = MPT3SAS_CTL_EVENT_LOG_SIZE;
memcpy(karg.event_types, ioc->event_type,
MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32));
if (copy_to_user(arg, &karg, sizeof(karg))) {
pr_err("failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
return 0;
}
/**
* _ctl_eventenable - main handler for MPT3EVENTENABLE opcode
* @ioc: per adapter object
* @arg: user space buffer containing ioctl content
*/
static long
_ctl_eventenable(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
{
struct mpt3_ioctl_eventenable karg;
if (copy_from_user(&karg, arg, sizeof(karg))) {
pr_err("failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
__func__));
memcpy(ioc->event_type, karg.event_types,
MPI2_EVENT_NOTIFY_EVENTMASK_WORDS * sizeof(u32));
mpt3sas_base_validate_event_type(ioc, ioc->event_type);
if (ioc->event_log)
return 0;
/* initialize event_log */
ioc->event_context = 0;
ioc->aen_event_read_flag = 0;
ioc->event_log = kcalloc(MPT3SAS_CTL_EVENT_LOG_SIZE,
sizeof(struct MPT3_IOCTL_EVENTS), GFP_KERNEL);
if (!ioc->event_log) {
pr_err("failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -ENOMEM;
}
return 0;
}
/**
* _ctl_eventreport - main handler for MPT3EVENTREPORT opcode
* @ioc: per adapter object
* @arg: user space buffer containing ioctl content
*/
static long
_ctl_eventreport(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
{
struct mpt3_ioctl_eventreport karg;
u32 number_bytes, max_events, max;
struct mpt3_ioctl_eventreport __user *uarg = arg;
if (copy_from_user(&karg, arg, sizeof(karg))) {
pr_err("failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
__func__));
number_bytes = karg.hdr.max_data_size -
sizeof(struct mpt3_ioctl_header);
max_events = number_bytes/sizeof(struct MPT3_IOCTL_EVENTS);
max = min_t(u32, MPT3SAS_CTL_EVENT_LOG_SIZE, max_events);
/* If fewer than 1 event is requested, there must have
* been some type of error.
*/
if (!max || !ioc->event_log)
return -ENODATA;
number_bytes = max * sizeof(struct MPT3_IOCTL_EVENTS);
if (copy_to_user(uarg->event_data, ioc->event_log, number_bytes)) {
pr_err("failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
/* reset flag so SIGIO can restart */
ioc->aen_event_read_flag = 0;
return 0;
}
/**
* _ctl_do_reset - main handler for MPT3HARDRESET opcode
* @ioc: per adapter object
* @arg: user space buffer containing ioctl content
*/
static long
_ctl_do_reset(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
{
struct mpt3_ioctl_diag_reset karg;
int retval;
if (copy_from_user(&karg, arg, sizeof(karg))) {
pr_err("failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
if (ioc->shost_recovery || ioc->pci_error_recovery ||
ioc->is_driver_loading)
return -EAGAIN;
dctlprintk(ioc, ioc_info(ioc, "%s: enter\n",
__func__));
retval = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
ioc_info(ioc, "host reset: %s\n", ((!retval) ? "SUCCESS" : "FAILED"));
return 0;
}
/**
* _ctl_btdh_search_sas_device - searching for sas device
* @ioc: per adapter object
* @btdh: btdh ioctl payload
*/
static int
_ctl_btdh_search_sas_device(struct MPT3SAS_ADAPTER *ioc,
struct mpt3_ioctl_btdh_mapping *btdh)
{
struct _sas_device *sas_device;
unsigned long flags;
int rc = 0;
if (list_empty(&ioc->sas_device_list))
return rc;
spin_lock_irqsave(&ioc->sas_device_lock, flags);
list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
btdh->handle == sas_device->handle) {
btdh->bus = sas_device->channel;
btdh->id = sas_device->id;
rc = 1;
goto out;
} else if (btdh->bus == sas_device->channel && btdh->id ==
sas_device->id && btdh->handle == 0xFFFF) {
btdh->handle = sas_device->handle;
rc = 1;
goto out;
}
}
out:
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
return rc;
}
/**
* _ctl_btdh_search_pcie_device - searching for pcie device
* @ioc: per adapter object
* @btdh: btdh ioctl payload
*/
static int
_ctl_btdh_search_pcie_device(struct MPT3SAS_ADAPTER *ioc,
struct mpt3_ioctl_btdh_mapping *btdh)
{
struct _pcie_device *pcie_device;
unsigned long flags;
int rc = 0;
if (list_empty(&ioc->pcie_device_list))
return rc;
spin_lock_irqsave(&ioc->pcie_device_lock, flags);
list_for_each_entry(pcie_device, &ioc->pcie_device_list, list) {
if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
btdh->handle == pcie_device->handle) {
btdh->bus = pcie_device->channel;
btdh->id = pcie_device->id;
rc = 1;
goto out;
} else if (btdh->bus == pcie_device->channel && btdh->id ==
pcie_device->id && btdh->handle == 0xFFFF) {
btdh->handle = pcie_device->handle;
rc = 1;
goto out;
}
}
out:
spin_unlock_irqrestore(&ioc->pcie_device_lock, flags);
return rc;
}
/**
* _ctl_btdh_search_raid_device - searching for raid device
* @ioc: per adapter object
* @btdh: btdh ioctl payload
*/
static int
_ctl_btdh_search_raid_device(struct MPT3SAS_ADAPTER *ioc,
struct mpt3_ioctl_btdh_mapping *btdh)
{
struct _raid_device *raid_device;
unsigned long flags;
int rc = 0;
if (list_empty(&ioc->raid_device_list))
return rc;
spin_lock_irqsave(&ioc->raid_device_lock, flags);
list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
if (btdh->bus == 0xFFFFFFFF && btdh->id == 0xFFFFFFFF &&
btdh->handle == raid_device->handle) {
btdh->bus = raid_device->channel;
btdh->id = raid_device->id;
rc = 1;
goto out;
} else if (btdh->bus == raid_device->channel && btdh->id ==
raid_device->id && btdh->handle == 0xFFFF) {
btdh->handle = raid_device->handle;
rc = 1;
goto out;
}
}
out:
spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
return rc;
}
/**
* _ctl_btdh_mapping - main handler for MPT3BTDHMAPPING opcode
* @ioc: per adapter object
* @arg: user space buffer containing ioctl content
*/
static long
_ctl_btdh_mapping(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
{
struct mpt3_ioctl_btdh_mapping karg;
int rc;
if (copy_from_user(&karg, arg, sizeof(karg))) {
pr_err("failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
dctlprintk(ioc, ioc_info(ioc, "%s\n",
__func__));
rc = _ctl_btdh_search_sas_device(ioc, &karg);
if (!rc)
rc = _ctl_btdh_search_pcie_device(ioc, &karg);
if (!rc)
_ctl_btdh_search_raid_device(ioc, &karg);
if (copy_to_user(arg, &karg, sizeof(karg))) {
pr_err("failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
return 0;
}
/**
* _ctl_diag_capability - return diag buffer capability
* @ioc: per adapter object
* @buffer_type: specifies either TRACE, SNAPSHOT, or EXTENDED
*
* returns 1 when diag buffer support is enabled in firmware
*/
static u8
_ctl_diag_capability(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type)
{
u8 rc = 0;
switch (buffer_type) {
case MPI2_DIAG_BUF_TYPE_TRACE:
if (ioc->facts.IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER)
rc = 1;
break;
case MPI2_DIAG_BUF_TYPE_SNAPSHOT:
if (ioc->facts.IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER)
rc = 1;
break;
case MPI2_DIAG_BUF_TYPE_EXTENDED:
if (ioc->facts.IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER)
rc = 1;
}
return rc;
}
/**
* _ctl_diag_register_2 - wrapper for registering diag buffer support
* @ioc: per adapter object
* @diag_register: the diag_register struct passed in from user space
*
*/
static long
_ctl_diag_register_2(struct MPT3SAS_ADAPTER *ioc,
struct mpt3_diag_register *diag_register)
{
int rc, i;
void *request_data = NULL;
dma_addr_t request_data_dma;
u32 request_data_sz = 0;
Mpi2DiagBufferPostRequest_t *mpi_request;
Mpi2DiagBufferPostReply_t *mpi_reply;
u8 buffer_type;
u16 smid;
u16 ioc_status;
u32 ioc_state;
u8 issue_reset = 0;
dctlprintk(ioc, ioc_info(ioc, "%s\n",
__func__));
ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
ioc_err(ioc, "%s: failed due to ioc not operational\n",
__func__);
rc = -EAGAIN;
goto out;
}
if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) {
ioc_err(ioc, "%s: ctl_cmd in use\n", __func__);
rc = -EAGAIN;
goto out;
}
buffer_type = diag_register->buffer_type;
if (!_ctl_diag_capability(ioc, buffer_type)) {
ioc_err(ioc, "%s: doesn't have capability for buffer_type(0x%02x)\n",
__func__, buffer_type);
return -EPERM;
}
if (ioc->diag_buffer_status[buffer_type] &
MPT3_DIAG_BUFFER_IS_REGISTERED) {
ioc_err(ioc, "%s: already has a registered buffer for buffer_type(0x%02x)\n",
__func__, buffer_type);
return -EINVAL;
}
if (diag_register->requested_buffer_size % 4) {
ioc_err(ioc, "%s: the requested_buffer_size is not 4 byte aligned\n",
__func__);
return -EINVAL;
}
smid = mpt3sas_base_get_smid(ioc, ioc->ctl_cb_idx);
if (!smid) {
ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
rc = -EAGAIN;
goto out;
}
rc = 0;
ioc->ctl_cmds.status = MPT3_CMD_PENDING;
memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
ioc->ctl_cmds.smid = smid;
request_data = ioc->diag_buffer[buffer_type];
request_data_sz = diag_register->requested_buffer_size;
ioc->unique_id[buffer_type] = diag_register->unique_id;
ioc->diag_buffer_status[buffer_type] = 0;
memcpy(ioc->product_specific[buffer_type],
diag_register->product_specific, MPT3_PRODUCT_SPECIFIC_DWORDS);
ioc->diagnostic_flags[buffer_type] = diag_register->diagnostic_flags;
if (request_data) {
request_data_dma = ioc->diag_buffer_dma[buffer_type];
if (request_data_sz != ioc->diag_buffer_sz[buffer_type]) {
dma_free_coherent(&ioc->pdev->dev,
ioc->diag_buffer_sz[buffer_type],
request_data, request_data_dma);
request_data = NULL;
}
}
if (request_data == NULL) {
ioc->diag_buffer_sz[buffer_type] = 0;
ioc->diag_buffer_dma[buffer_type] = 0;
request_data = dma_alloc_coherent(&ioc->pdev->dev,
request_data_sz, &request_data_dma, GFP_KERNEL);
if (request_data == NULL) {
ioc_err(ioc, "%s: failed allocating memory for diag buffers, requested size(%d)\n",
__func__, request_data_sz);
mpt3sas_base_free_smid(ioc, smid);
return -ENOMEM;
}
ioc->diag_buffer[buffer_type] = request_data;
ioc->diag_buffer_sz[buffer_type] = request_data_sz;
ioc->diag_buffer_dma[buffer_type] = request_data_dma;
}
mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
mpi_request->BufferType = diag_register->buffer_type;
mpi_request->Flags = cpu_to_le32(diag_register->diagnostic_flags);
mpi_request->BufferAddress = cpu_to_le64(request_data_dma);
mpi_request->BufferLength = cpu_to_le32(request_data_sz);
mpi_request->VF_ID = 0; /* TODO */
mpi_request->VP_ID = 0;
dctlprintk(ioc,
ioc_info(ioc, "%s: diag_buffer(0x%p), dma(0x%llx), sz(%d)\n",
__func__, request_data,
(unsigned long long)request_data_dma,
le32_to_cpu(mpi_request->BufferLength)));
for (i = 0; i < MPT3_PRODUCT_SPECIFIC_DWORDS; i++)
mpi_request->ProductSpecific[i] =
cpu_to_le32(ioc->product_specific[buffer_type][i]);
init_completion(&ioc->ctl_cmds.done);
ioc->put_smid_default(ioc, smid);
wait_for_completion_timeout(&ioc->ctl_cmds.done,
MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
issue_reset =
mpt3sas_base_check_cmd_timeout(ioc,
ioc->ctl_cmds.status, mpi_request,
sizeof(Mpi2DiagBufferPostRequest_t)/4);
goto issue_host_reset;
}
/* process the completed Reply Message Frame */
if ((ioc->ctl_cmds.status & MPT3_CMD_REPLY_VALID) == 0) {
ioc_err(ioc, "%s: no reply message\n", __func__);
rc = -EFAULT;
goto out;
}
mpi_reply = ioc->ctl_cmds.reply;
ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
ioc->diag_buffer_status[buffer_type] |=
MPT3_DIAG_BUFFER_IS_REGISTERED;
dctlprintk(ioc, ioc_info(ioc, "%s: success\n", __func__));
} else {
ioc_info(ioc, "%s: ioc_status(0x%04x) log_info(0x%08x)\n",
__func__,
ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
rc = -EFAULT;
}
issue_host_reset:
if (issue_reset)
mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
out:
if (rc && request_data)
dma_free_coherent(&ioc->pdev->dev, request_data_sz,
request_data, request_data_dma);
ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
return rc;
}
/**
* mpt3sas_enable_diag_buffer - enabling diag_buffers support driver load time
* @ioc: per adapter object
* @bits_to_register: bitwise field where trace is bit 0, and snapshot is bit 1
*
* This is called when command line option diag_buffer_enable is enabled
* at driver load time.
*/
void
mpt3sas_enable_diag_buffer(struct MPT3SAS_ADAPTER *ioc, u8 bits_to_register)
{
struct mpt3_diag_register diag_register;
u32 ret_val;
u32 trace_buff_size = ioc->manu_pg11.HostTraceBufferMaxSizeKB<<10;
u32 min_trace_buff_size = 0;
u32 decr_trace_buff_size = 0;
memset(&diag_register, 0, sizeof(struct mpt3_diag_register));
if (bits_to_register & 1) {
ioc_info(ioc, "registering trace buffer support\n");
ioc->diag_trigger_master.MasterData =
(MASTER_TRIGGER_FW_FAULT + MASTER_TRIGGER_ADAPTER_RESET);
diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_TRACE;
diag_register.unique_id = 0x7075900;
if (trace_buff_size != 0) {
diag_register.requested_buffer_size = trace_buff_size;
min_trace_buff_size =
ioc->manu_pg11.HostTraceBufferMinSizeKB<<10;
decr_trace_buff_size =
ioc->manu_pg11.HostTraceBufferDecrementSizeKB<<10;
if (min_trace_buff_size > trace_buff_size) {
/* The buff size is not set correctly */
ioc_err(ioc,
"Min Trace Buff size (%d KB) greater than Max Trace Buff size (%d KB)\n",
min_trace_buff_size>>10,
trace_buff_size>>10);
ioc_err(ioc,
"Using zero Min Trace Buff Size\n");
min_trace_buff_size = 0;
}
if (decr_trace_buff_size == 0) {
/*
* retry the min size if decrement
* is not available.
*/
decr_trace_buff_size =
trace_buff_size - min_trace_buff_size;
}
} else {
/* register for 2MB buffers */
diag_register.requested_buffer_size = 2 * (1024 * 1024);
}
do {
ret_val = _ctl_diag_register_2(ioc, &diag_register);
if (ret_val == -ENOMEM && min_trace_buff_size &&
(trace_buff_size - decr_trace_buff_size) >=
min_trace_buff_size) {
/* adjust the buffer size */
trace_buff_size -= decr_trace_buff_size;
diag_register.requested_buffer_size =
trace_buff_size;
} else
break;
} while (true);
if (ret_val == -ENOMEM)
ioc_err(ioc,
"Cannot allocate trace buffer memory. Last memory tried = %d KB\n",
diag_register.requested_buffer_size>>10);
else if (ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE]
& MPT3_DIAG_BUFFER_IS_REGISTERED)
ioc_err(ioc, "Trace buffer memory %d KB allocated\n",
diag_register.requested_buffer_size>>10);
}
if (bits_to_register & 2) {
ioc_info(ioc, "registering snapshot buffer support\n");
diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_SNAPSHOT;
/* register for 2MB buffers */
diag_register.requested_buffer_size = 2 * (1024 * 1024);
diag_register.unique_id = 0x7075901;
_ctl_diag_register_2(ioc, &diag_register);
}
if (bits_to_register & 4) {
ioc_info(ioc, "registering extended buffer support\n");
diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_EXTENDED;
/* register for 2MB buffers */
diag_register.requested_buffer_size = 2 * (1024 * 1024);
diag_register.unique_id = 0x7075901;
_ctl_diag_register_2(ioc, &diag_register);
}
}
/**
* _ctl_diag_register - application register with driver
* @ioc: per adapter object
* @arg: user space buffer containing ioctl content
*
* This will allow the driver to setup any required buffers that will be
* needed by firmware to communicate with the driver.
*/
static long
_ctl_diag_register(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
{
struct mpt3_diag_register karg;
long rc;
if (copy_from_user(&karg, arg, sizeof(karg))) {
pr_err("failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
rc = _ctl_diag_register_2(ioc, &karg);
return rc;
}
/**
* _ctl_diag_unregister - application unregister with driver
* @ioc: per adapter object
* @arg: user space buffer containing ioctl content
*
* This will allow the driver to cleanup any memory allocated for diag
* messages and to free up any resources.
*/
static long
_ctl_diag_unregister(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
{
struct mpt3_diag_unregister karg;
void *request_data;
dma_addr_t request_data_dma;
u32 request_data_sz;
u8 buffer_type;
if (copy_from_user(&karg, arg, sizeof(karg))) {
pr_err("failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
dctlprintk(ioc, ioc_info(ioc, "%s\n",
__func__));
buffer_type = karg.unique_id & 0x000000ff;
if (!_ctl_diag_capability(ioc, buffer_type)) {
ioc_err(ioc, "%s: doesn't have capability for buffer_type(0x%02x)\n",
__func__, buffer_type);
return -EPERM;
}
if ((ioc->diag_buffer_status[buffer_type] &
MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
ioc_err(ioc, "%s: buffer_type(0x%02x) is not registered\n",
__func__, buffer_type);
return -EINVAL;
}
if ((ioc->diag_buffer_status[buffer_type] &
MPT3_DIAG_BUFFER_IS_RELEASED) == 0) {
ioc_err(ioc, "%s: buffer_type(0x%02x) has not been released\n",
__func__, buffer_type);
return -EINVAL;
}
if (karg.unique_id != ioc->unique_id[buffer_type]) {
ioc_err(ioc, "%s: unique_id(0x%08x) is not registered\n",
__func__, karg.unique_id);
return -EINVAL;
}
request_data = ioc->diag_buffer[buffer_type];
if (!request_data) {
ioc_err(ioc, "%s: doesn't have memory allocated for buffer_type(0x%02x)\n",
__func__, buffer_type);
return -ENOMEM;
}
request_data_sz = ioc->diag_buffer_sz[buffer_type];
request_data_dma = ioc->diag_buffer_dma[buffer_type];
dma_free_coherent(&ioc->pdev->dev, request_data_sz,
request_data, request_data_dma);
ioc->diag_buffer[buffer_type] = NULL;
ioc->diag_buffer_status[buffer_type] = 0;
return 0;
}
/**
* _ctl_diag_query - query relevant info associated with diag buffers
* @ioc: per adapter object
* @arg: user space buffer containing ioctl content
*
* The application will send only buffer_type and unique_id. Driver will
* inspect unique_id first, if valid, fill in all the info. If unique_id is
* 0x00, the driver will return info specified by Buffer Type.
*/
static long
_ctl_diag_query(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
{
struct mpt3_diag_query karg;
void *request_data;
int i;
u8 buffer_type;
if (copy_from_user(&karg, arg, sizeof(karg))) {
pr_err("failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
dctlprintk(ioc, ioc_info(ioc, "%s\n",
__func__));
karg.application_flags = 0;
buffer_type = karg.buffer_type;
if (!_ctl_diag_capability(ioc, buffer_type)) {
ioc_err(ioc, "%s: doesn't have capability for buffer_type(0x%02x)\n",
__func__, buffer_type);
return -EPERM;
}
if ((ioc->diag_buffer_status[buffer_type] &
MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
ioc_err(ioc, "%s: buffer_type(0x%02x) is not registered\n",
__func__, buffer_type);
return -EINVAL;
}
if (karg.unique_id & 0xffffff00) {
if (karg.unique_id != ioc->unique_id[buffer_type]) {
ioc_err(ioc, "%s: unique_id(0x%08x) is not registered\n",
__func__, karg.unique_id);
return -EINVAL;
}
}
request_data = ioc->diag_buffer[buffer_type];
if (!request_data) {
ioc_err(ioc, "%s: doesn't have buffer for buffer_type(0x%02x)\n",
__func__, buffer_type);
return -ENOMEM;
}
if (ioc->diag_buffer_status[buffer_type] & MPT3_DIAG_BUFFER_IS_RELEASED)
karg.application_flags = (MPT3_APP_FLAGS_APP_OWNED |
MPT3_APP_FLAGS_BUFFER_VALID);
else
karg.application_flags = (MPT3_APP_FLAGS_APP_OWNED |
MPT3_APP_FLAGS_BUFFER_VALID |
MPT3_APP_FLAGS_FW_BUFFER_ACCESS);
for (i = 0; i < MPT3_PRODUCT_SPECIFIC_DWORDS; i++)
karg.product_specific[i] =
ioc->product_specific[buffer_type][i];
karg.total_buffer_size = ioc->diag_buffer_sz[buffer_type];
karg.driver_added_buffer_size = 0;
karg.unique_id = ioc->unique_id[buffer_type];
karg.diagnostic_flags = ioc->diagnostic_flags[buffer_type];
if (copy_to_user(arg, &karg, sizeof(struct mpt3_diag_query))) {
ioc_err(ioc, "%s: unable to write mpt3_diag_query data @ %p\n",
__func__, arg);
return -EFAULT;
}
return 0;
}
/**
* mpt3sas_send_diag_release - Diag Release Message
* @ioc: per adapter object
* @buffer_type: specifies either TRACE, SNAPSHOT, or EXTENDED
* @issue_reset: specifies whether host reset is required.
*
*/
int
mpt3sas_send_diag_release(struct MPT3SAS_ADAPTER *ioc, u8 buffer_type,
u8 *issue_reset)
{
Mpi2DiagReleaseRequest_t *mpi_request;
Mpi2DiagReleaseReply_t *mpi_reply;
u16 smid;
u16 ioc_status;
u32 ioc_state;
int rc;
dctlprintk(ioc, ioc_info(ioc, "%s\n",
__func__));
rc = 0;
*issue_reset = 0;
ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
if (ioc->diag_buffer_status[buffer_type] &
MPT3_DIAG_BUFFER_IS_REGISTERED)
ioc->diag_buffer_status[buffer_type] |=
MPT3_DIAG_BUFFER_IS_RELEASED;
dctlprintk(ioc,
ioc_info(ioc, "%s: skipping due to FAULT state\n",
__func__));
rc = -EAGAIN;
goto out;
}
if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) {
ioc_err(ioc, "%s: ctl_cmd in use\n", __func__);
rc = -EAGAIN;
goto out;
}
smid = mpt3sas_base_get_smid(ioc, ioc->ctl_cb_idx);
if (!smid) {
ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
rc = -EAGAIN;
goto out;
}
ioc->ctl_cmds.status = MPT3_CMD_PENDING;
memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
ioc->ctl_cmds.smid = smid;
mpi_request->Function = MPI2_FUNCTION_DIAG_RELEASE;
mpi_request->BufferType = buffer_type;
mpi_request->VF_ID = 0; /* TODO */
mpi_request->VP_ID = 0;
init_completion(&ioc->ctl_cmds.done);
ioc->put_smid_default(ioc, smid);
wait_for_completion_timeout(&ioc->ctl_cmds.done,
MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
*issue_reset = mpt3sas_base_check_cmd_timeout(ioc,
ioc->ctl_cmds.status, mpi_request,
sizeof(Mpi2DiagReleaseRequest_t)/4);
rc = -EFAULT;
goto out;
}
/* process the completed Reply Message Frame */
if ((ioc->ctl_cmds.status & MPT3_CMD_REPLY_VALID) == 0) {
ioc_err(ioc, "%s: no reply message\n", __func__);
rc = -EFAULT;
goto out;
}
mpi_reply = ioc->ctl_cmds.reply;
ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
ioc->diag_buffer_status[buffer_type] |=
MPT3_DIAG_BUFFER_IS_RELEASED;
dctlprintk(ioc, ioc_info(ioc, "%s: success\n", __func__));
} else {
ioc_info(ioc, "%s: ioc_status(0x%04x) log_info(0x%08x)\n",
__func__,
ioc_status, le32_to_cpu(mpi_reply->IOCLogInfo));
rc = -EFAULT;
}
out:
ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
return rc;
}
/**
* _ctl_diag_release - request to send Diag Release Message to firmware
* @ioc: ?
* @arg: user space buffer containing ioctl content
*
* This allows ownership of the specified buffer to returned to the driver,
* allowing an application to read the buffer without fear that firmware is
* overwriting information in the buffer.
*/
static long
_ctl_diag_release(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
{
struct mpt3_diag_release karg;
void *request_data;
int rc;
u8 buffer_type;
u8 issue_reset = 0;
if (copy_from_user(&karg, arg, sizeof(karg))) {
pr_err("failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
dctlprintk(ioc, ioc_info(ioc, "%s\n",
__func__));
buffer_type = karg.unique_id & 0x000000ff;
if (!_ctl_diag_capability(ioc, buffer_type)) {
ioc_err(ioc, "%s: doesn't have capability for buffer_type(0x%02x)\n",
__func__, buffer_type);
return -EPERM;
}
if ((ioc->diag_buffer_status[buffer_type] &
MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
ioc_err(ioc, "%s: buffer_type(0x%02x) is not registered\n",
__func__, buffer_type);
return -EINVAL;
}
if (karg.unique_id != ioc->unique_id[buffer_type]) {
ioc_err(ioc, "%s: unique_id(0x%08x) is not registered\n",
__func__, karg.unique_id);
return -EINVAL;
}
if (ioc->diag_buffer_status[buffer_type] &
MPT3_DIAG_BUFFER_IS_RELEASED) {
ioc_err(ioc, "%s: buffer_type(0x%02x) is already released\n",
__func__, buffer_type);
return 0;
}
request_data = ioc->diag_buffer[buffer_type];
if (!request_data) {
ioc_err(ioc, "%s: doesn't have memory allocated for buffer_type(0x%02x)\n",
__func__, buffer_type);
return -ENOMEM;
}
/* buffers were released by due to host reset */
if ((ioc->diag_buffer_status[buffer_type] &
MPT3_DIAG_BUFFER_IS_DIAG_RESET)) {
ioc->diag_buffer_status[buffer_type] |=
MPT3_DIAG_BUFFER_IS_RELEASED;
ioc->diag_buffer_status[buffer_type] &=
~MPT3_DIAG_BUFFER_IS_DIAG_RESET;
ioc_err(ioc, "%s: buffer_type(0x%02x) was released due to host reset\n",
__func__, buffer_type);
return 0;
}
rc = mpt3sas_send_diag_release(ioc, buffer_type, &issue_reset);
if (issue_reset)
mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
return rc;
}
/**
* _ctl_diag_read_buffer - request for copy of the diag buffer
* @ioc: per adapter object
* @arg: user space buffer containing ioctl content
*/
static long
_ctl_diag_read_buffer(struct MPT3SAS_ADAPTER *ioc, void __user *arg)
{
struct mpt3_diag_read_buffer karg;
struct mpt3_diag_read_buffer __user *uarg = arg;
void *request_data, *diag_data;
Mpi2DiagBufferPostRequest_t *mpi_request;
Mpi2DiagBufferPostReply_t *mpi_reply;
int rc, i;
u8 buffer_type;
unsigned long request_size, copy_size;
u16 smid;
u16 ioc_status;
u8 issue_reset = 0;
if (copy_from_user(&karg, arg, sizeof(karg))) {
pr_err("failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
dctlprintk(ioc, ioc_info(ioc, "%s\n",
__func__));
buffer_type = karg.unique_id & 0x000000ff;
if (!_ctl_diag_capability(ioc, buffer_type)) {
ioc_err(ioc, "%s: doesn't have capability for buffer_type(0x%02x)\n",
__func__, buffer_type);
return -EPERM;
}
if (karg.unique_id != ioc->unique_id[buffer_type]) {
ioc_err(ioc, "%s: unique_id(0x%08x) is not registered\n",
__func__, karg.unique_id);
return -EINVAL;
}
request_data = ioc->diag_buffer[buffer_type];
if (!request_data) {
ioc_err(ioc, "%s: doesn't have buffer for buffer_type(0x%02x)\n",
__func__, buffer_type);
return -ENOMEM;
}
request_size = ioc->diag_buffer_sz[buffer_type];
if ((karg.starting_offset % 4) || (karg.bytes_to_read % 4)) {
ioc_err(ioc, "%s: either the starting_offset or bytes_to_read are not 4 byte aligned\n",
__func__);
return -EINVAL;
}
if (karg.starting_offset > request_size)
return -EINVAL;
diag_data = (void *)(request_data + karg.starting_offset);
dctlprintk(ioc,
ioc_info(ioc, "%s: diag_buffer(%p), offset(%d), sz(%d)\n",
__func__, diag_data, karg.starting_offset,
karg.bytes_to_read));
/* Truncate data on requests that are too large */
if ((diag_data + karg.bytes_to_read < diag_data) ||
(diag_data + karg.bytes_to_read > request_data + request_size))
copy_size = request_size - karg.starting_offset;
else
copy_size = karg.bytes_to_read;
if (copy_to_user((void __user *)uarg->diagnostic_data,
diag_data, copy_size)) {
ioc_err(ioc, "%s: Unable to write mpt_diag_read_buffer_t data @ %p\n",
__func__, diag_data);
return -EFAULT;
}
if ((karg.flags & MPT3_FLAGS_REREGISTER) == 0)
return 0;
dctlprintk(ioc,
ioc_info(ioc, "%s: Reregister buffer_type(0x%02x)\n",
__func__, buffer_type));
if ((ioc->diag_buffer_status[buffer_type] &
MPT3_DIAG_BUFFER_IS_RELEASED) == 0) {
dctlprintk(ioc,
ioc_info(ioc, "%s: buffer_type(0x%02x) is still registered\n",
__func__, buffer_type));
return 0;
}
/* Get a free request frame and save the message context.
*/
if (ioc->ctl_cmds.status != MPT3_CMD_NOT_USED) {
ioc_err(ioc, "%s: ctl_cmd in use\n", __func__);
rc = -EAGAIN;
goto out;
}
smid = mpt3sas_base_get_smid(ioc, ioc->ctl_cb_idx);
if (!smid) {
ioc_err(ioc, "%s: failed obtaining a smid\n", __func__);
rc = -EAGAIN;
goto out;
}
rc = 0;
ioc->ctl_cmds.status = MPT3_CMD_PENDING;
memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
ioc->ctl_cmds.smid = smid;
mpi_request->Function = MPI2_FUNCTION_DIAG_BUFFER_POST;
mpi_request->BufferType = buffer_type;
mpi_request->BufferLength =
cpu_to_le32(ioc->diag_buffer_sz[buffer_type]);
mpi_request->BufferAddress =
cpu_to_le64(ioc->diag_buffer_dma[buffer_type]);
for (i = 0; i < MPT3_PRODUCT_SPECIFIC_DWORDS; i++)
mpi_request->ProductSpecific[i] =
cpu_to_le32(ioc->product_specific[buffer_type][i]);
mpi_request->VF_ID = 0; /* TODO */
mpi_request->VP_ID = 0;
init_completion(&ioc->ctl_cmds.done);
ioc->put_smid_default(ioc, smid);
wait_for_completion_timeout(&ioc->ctl_cmds.done,
MPT3_IOCTL_DEFAULT_TIMEOUT*HZ);
if (!(ioc->ctl_cmds.status & MPT3_CMD_COMPLETE)) {
issue_reset =
mpt3sas_base_check_cmd_timeout(ioc,
ioc->ctl_cmds.status, mpi_request,
sizeof(Mpi2DiagBufferPostRequest_t)/4);
goto issue_host_reset;
}
/* process the completed Reply Message Frame */
if ((ioc->ctl_cmds.status & MPT3_CMD_REPLY_VALID) == 0) {
ioc_err(ioc, "%s: no reply message\n", __func__);
rc = -EFAULT;
goto out;
}
mpi_reply = ioc->ctl_cmds.reply;
ioc_status = le16_to_cpu(mpi_reply->IOCStatus) & MPI2_IOCSTATUS_MASK;
if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
ioc->diag_buffer_status[buffer_type] |=
MPT3_DIAG_BUFFER_IS_REGISTERED;
dctlprintk(ioc, ioc_info(ioc, "%s: success\n", __func__));
} else {
ioc_info(ioc, "%s: ioc_status(0x%04x) log_info(0x%08x)\n",
__func__, ioc_status,
le32_to_cpu(mpi_reply->IOCLogInfo));
rc = -EFAULT;
}
issue_host_reset:
if (issue_reset)
mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
out:
ioc->ctl_cmds.status = MPT3_CMD_NOT_USED;
return rc;
}
#ifdef CONFIG_COMPAT
/**
* _ctl_compat_mpt_command - convert 32bit pointers to 64bit.
* @ioc: per adapter object
* @cmd: ioctl opcode
* @arg: (struct mpt3_ioctl_command32)
*
* MPT3COMMAND32 - Handle 32bit applications running on 64bit os.
*/
static long
_ctl_compat_mpt_command(struct MPT3SAS_ADAPTER *ioc, unsigned cmd,
void __user *arg)
{
struct mpt3_ioctl_command32 karg32;
struct mpt3_ioctl_command32 __user *uarg;
struct mpt3_ioctl_command karg;
if (_IOC_SIZE(cmd) != sizeof(struct mpt3_ioctl_command32))
return -EINVAL;
uarg = (struct mpt3_ioctl_command32 __user *) arg;
if (copy_from_user(&karg32, (char __user *)arg, sizeof(karg32))) {
pr_err("failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
memset(&karg, 0, sizeof(struct mpt3_ioctl_command));
karg.hdr.ioc_number = karg32.hdr.ioc_number;
karg.hdr.port_number = karg32.hdr.port_number;
karg.hdr.max_data_size = karg32.hdr.max_data_size;
karg.timeout = karg32.timeout;
karg.max_reply_bytes = karg32.max_reply_bytes;
karg.data_in_size = karg32.data_in_size;
karg.data_out_size = karg32.data_out_size;
karg.max_sense_bytes = karg32.max_sense_bytes;
karg.data_sge_offset = karg32.data_sge_offset;
karg.reply_frame_buf_ptr = compat_ptr(karg32.reply_frame_buf_ptr);
karg.data_in_buf_ptr = compat_ptr(karg32.data_in_buf_ptr);
karg.data_out_buf_ptr = compat_ptr(karg32.data_out_buf_ptr);
karg.sense_data_ptr = compat_ptr(karg32.sense_data_ptr);
return _ctl_do_mpt_command(ioc, karg, &uarg->mf);
}
#endif
/**
* _ctl_ioctl_main - main ioctl entry point
* @file: (struct file)
* @cmd: ioctl opcode
* @arg: user space data buffer
* @compat: handles 32 bit applications in 64bit os
* @mpi_version: will be MPI2_VERSION for mpt2ctl ioctl device &
* MPI25_VERSION | MPI26_VERSION for mpt3ctl ioctl device.
*/
static long
_ctl_ioctl_main(struct file *file, unsigned int cmd, void __user *arg,
u8 compat, u16 mpi_version)
{
struct MPT3SAS_ADAPTER *ioc;
struct mpt3_ioctl_header ioctl_header;
enum block_state state;
long ret = -EINVAL;
/* get IOCTL header */
if (copy_from_user(&ioctl_header, (char __user *)arg,
sizeof(struct mpt3_ioctl_header))) {
pr_err("failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
return -EFAULT;
}
if (_ctl_verify_adapter(ioctl_header.ioc_number,
&ioc, mpi_version) == -1 || !ioc)
return -ENODEV;
/* pci_access_mutex lock acquired by ioctl path */
mutex_lock(&ioc->pci_access_mutex);
if (ioc->shost_recovery || ioc->pci_error_recovery ||
ioc->is_driver_loading || ioc->remove_host) {
ret = -EAGAIN;
goto out_unlock_pciaccess;
}
state = (file->f_flags & O_NONBLOCK) ? NON_BLOCKING : BLOCKING;
if (state == NON_BLOCKING) {
if (!mutex_trylock(&ioc->ctl_cmds.mutex)) {
ret = -EAGAIN;
goto out_unlock_pciaccess;
}
} else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex)) {
ret = -ERESTARTSYS;
goto out_unlock_pciaccess;
}
switch (cmd) {
case MPT3IOCINFO:
if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_iocinfo))
ret = _ctl_getiocinfo(ioc, arg);
break;
#ifdef CONFIG_COMPAT
case MPT3COMMAND32:
#endif
case MPT3COMMAND:
{
struct mpt3_ioctl_command __user *uarg;
struct mpt3_ioctl_command karg;
#ifdef CONFIG_COMPAT
if (compat) {
ret = _ctl_compat_mpt_command(ioc, cmd, arg);
break;
}
#endif
if (copy_from_user(&karg, arg, sizeof(karg))) {
pr_err("failure at %s:%d/%s()!\n",
__FILE__, __LINE__, __func__);
ret = -EFAULT;
break;
}
if (karg.hdr.ioc_number != ioctl_header.ioc_number) {
ret = -EINVAL;
break;
}
if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_command)) {
uarg = arg;
ret = _ctl_do_mpt_command(ioc, karg, &uarg->mf);
}
break;
}
case MPT3EVENTQUERY:
if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_eventquery))
ret = _ctl_eventquery(ioc, arg);
break;
case MPT3EVENTENABLE:
if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_eventenable))
ret = _ctl_eventenable(ioc, arg);
break;
case MPT3EVENTREPORT:
ret = _ctl_eventreport(ioc, arg);
break;
case MPT3HARDRESET:
if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_diag_reset))
ret = _ctl_do_reset(ioc, arg);
break;
case MPT3BTDHMAPPING:
if (_IOC_SIZE(cmd) == sizeof(struct mpt3_ioctl_btdh_mapping))
ret = _ctl_btdh_mapping(ioc, arg);
break;
case MPT3DIAGREGISTER:
if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_register))
ret = _ctl_diag_register(ioc, arg);
break;
case MPT3DIAGUNREGISTER:
if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_unregister))
ret = _ctl_diag_unregister(ioc, arg);
break;
case MPT3DIAGQUERY:
if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_query))
ret = _ctl_diag_query(ioc, arg);
break;
case MPT3DIAGRELEASE:
if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_release))
ret = _ctl_diag_release(ioc, arg);
break;
case MPT3DIAGREADBUFFER:
if (_IOC_SIZE(cmd) == sizeof(struct mpt3_diag_read_buffer))
ret = _ctl_diag_read_buffer(ioc, arg);
break;
default:
dctlprintk(ioc,
ioc_info(ioc, "unsupported ioctl opcode(0x%08x)\n",
cmd));
break;
}
mutex_unlock(&ioc->ctl_cmds.mutex);
out_unlock_pciaccess:
mutex_unlock(&ioc->pci_access_mutex);
return ret;
}
/**
* _ctl_ioctl - mpt3ctl main ioctl entry point (unlocked)
* @file: (struct file)
* @cmd: ioctl opcode
* @arg: ?
*/
static long
_ctl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
long ret;
/* pass MPI25_VERSION | MPI26_VERSION value,
* to indicate that this ioctl cmd
* came from mpt3ctl ioctl device.
*/
ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 0,
MPI25_VERSION | MPI26_VERSION);
return ret;
}
/**
* _ctl_mpt2_ioctl - mpt2ctl main ioctl entry point (unlocked)
* @file: (struct file)
* @cmd: ioctl opcode
* @arg: ?
*/
static long
_ctl_mpt2_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
long ret;
/* pass MPI2_VERSION value, to indicate that this ioctl cmd
* came from mpt2ctl ioctl device.
*/
ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 0, MPI2_VERSION);
return ret;
}
#ifdef CONFIG_COMPAT
/**
*_ ctl_ioctl_compat - main ioctl entry point (compat)
* @file: ?
* @cmd: ?
* @arg: ?
*
* This routine handles 32 bit applications in 64bit os.
*/
static long
_ctl_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
{
long ret;
ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 1,
MPI25_VERSION | MPI26_VERSION);
return ret;
}
/**
*_ ctl_mpt2_ioctl_compat - main ioctl entry point (compat)
* @file: ?
* @cmd: ?
* @arg: ?
*
* This routine handles 32 bit applications in 64bit os.
*/
static long
_ctl_mpt2_ioctl_compat(struct file *file, unsigned cmd, unsigned long arg)
{
long ret;
ret = _ctl_ioctl_main(file, cmd, (void __user *)arg, 1, MPI2_VERSION);
return ret;
}
#endif
/* scsi host attributes */
/**
* version_fw_show - firmware version
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
version_fw_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
(ioc->facts.FWVersion.Word & 0xFF000000) >> 24,
(ioc->facts.FWVersion.Word & 0x00FF0000) >> 16,
(ioc->facts.FWVersion.Word & 0x0000FF00) >> 8,
ioc->facts.FWVersion.Word & 0x000000FF);
}
static DEVICE_ATTR_RO(version_fw);
/**
* version_bios_show - bios version
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
version_bios_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
u32 version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
return snprintf(buf, PAGE_SIZE, "%02d.%02d.%02d.%02d\n",
(version & 0xFF000000) >> 24,
(version & 0x00FF0000) >> 16,
(version & 0x0000FF00) >> 8,
version & 0x000000FF);
}
static DEVICE_ATTR_RO(version_bios);
/**
* version_mpi_show - MPI (message passing interface) version
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
version_mpi_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "%03x.%02x\n",
ioc->facts.MsgVersion, ioc->facts.HeaderVersion >> 8);
}
static DEVICE_ATTR_RO(version_mpi);
/**
* version_product_show - product name
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
version_product_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, 16, "%s\n", ioc->manu_pg0.ChipName);
}
static DEVICE_ATTR_RO(version_product);
/**
* version_nvdata_persistent_show - ndvata persistent version
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
version_nvdata_persistent_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "%08xh\n",
le32_to_cpu(ioc->iounit_pg0.NvdataVersionPersistent.Word));
}
static DEVICE_ATTR_RO(version_nvdata_persistent);
/**
* version_nvdata_default_show - nvdata default version
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
version_nvdata_default_show(struct device *cdev, struct device_attribute
*attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "%08xh\n",
le32_to_cpu(ioc->iounit_pg0.NvdataVersionDefault.Word));
}
static DEVICE_ATTR_RO(version_nvdata_default);
/**
* board_name_show - board name
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
board_name_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardName);
}
static DEVICE_ATTR_RO(board_name);
/**
* board_assembly_show - board assembly name
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
board_assembly_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardAssembly);
}
static DEVICE_ATTR_RO(board_assembly);
/**
* board_tracer_show - board tracer number
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
board_tracer_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, 16, "%s\n", ioc->manu_pg0.BoardTracerNumber);
}
static DEVICE_ATTR_RO(board_tracer);
/**
* io_delay_show - io missing delay
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* This is for firmware implemention for deboucing device
* removal events.
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
io_delay_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->io_missing_delay);
}
static DEVICE_ATTR_RO(io_delay);
/**
* device_delay_show - device missing delay
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* This is for firmware implemention for deboucing device
* removal events.
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
device_delay_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->device_missing_delay);
}
static DEVICE_ATTR_RO(device_delay);
/**
* fw_queue_depth_show - global credits
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* This is firmware queue depth limit
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
fw_queue_depth_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "%02d\n", ioc->facts.RequestCredit);
}
static DEVICE_ATTR_RO(fw_queue_depth);
/**
* sas_address_show - sas address
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* This is the controller sas address
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
host_sas_address_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
(unsigned long long)ioc->sas_hba.sas_address);
}
static DEVICE_ATTR_RO(host_sas_address);
/**
* logging_level_show - logging level
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* A sysfs 'read/write' shost attribute.
*/
static ssize_t
logging_level_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "%08xh\n", ioc->logging_level);
}
static ssize_t
logging_level_store(struct device *cdev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
int val = 0;
if (sscanf(buf, "%x", &val) != 1)
return -EINVAL;
ioc->logging_level = val;
ioc_info(ioc, "logging_level=%08xh\n",
ioc->logging_level);
return strlen(buf);
}
static DEVICE_ATTR_RW(logging_level);
/**
* fwfault_debug_show - show/store fwfault_debug
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* mpt3sas_fwfault_debug is command line option
* A sysfs 'read/write' shost attribute.
*/
static ssize_t
fwfault_debug_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "%d\n", ioc->fwfault_debug);
}
static ssize_t
fwfault_debug_store(struct device *cdev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
int val = 0;
if (sscanf(buf, "%d", &val) != 1)
return -EINVAL;
ioc->fwfault_debug = val;
ioc_info(ioc, "fwfault_debug=%d\n",
ioc->fwfault_debug);
return strlen(buf);
}
static DEVICE_ATTR_RW(fwfault_debug);
/**
* ioc_reset_count_show - ioc reset count
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* This is firmware queue depth limit
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
ioc_reset_count_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "%d\n", ioc->ioc_reset_count);
}
static DEVICE_ATTR_RO(ioc_reset_count);
/**
* reply_queue_count_show - number of reply queues
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* This is number of reply queues
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
reply_queue_count_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
u8 reply_queue_count;
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
if ((ioc->facts.IOCCapabilities &
MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX) && ioc->msix_enable)
reply_queue_count = ioc->reply_queue_count;
else
reply_queue_count = 1;
return snprintf(buf, PAGE_SIZE, "%d\n", reply_queue_count);
}
static DEVICE_ATTR_RO(reply_queue_count);
/**
* BRM_status_show - Backup Rail Monitor Status
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* This is number of reply queues
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
BRM_status_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
Mpi2IOUnitPage3_t *io_unit_pg3 = NULL;
Mpi2ConfigReply_t mpi_reply;
u16 backup_rail_monitor_status = 0;
u16 ioc_status;
int sz;
ssize_t rc = 0;
if (!ioc->is_warpdrive) {
ioc_err(ioc, "%s: BRM attribute is only for warpdrive\n",
__func__);
goto out;
}
/* pci_access_mutex lock acquired by sysfs show path */
mutex_lock(&ioc->pci_access_mutex);
if (ioc->pci_error_recovery || ioc->remove_host) {
mutex_unlock(&ioc->pci_access_mutex);
return 0;
}
/* allocate upto GPIOVal 36 entries */
sz = offsetof(Mpi2IOUnitPage3_t, GPIOVal) + (sizeof(u16) * 36);
io_unit_pg3 = kzalloc(sz, GFP_KERNEL);
if (!io_unit_pg3) {
ioc_err(ioc, "%s: failed allocating memory for iounit_pg3: (%d) bytes\n",
__func__, sz);
goto out;
}
if (mpt3sas_config_get_iounit_pg3(ioc, &mpi_reply, io_unit_pg3, sz) !=
0) {
ioc_err(ioc, "%s: failed reading iounit_pg3\n",
__func__);
goto out;
}
ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
ioc_err(ioc, "%s: iounit_pg3 failed with ioc_status(0x%04x)\n",
__func__, ioc_status);
goto out;
}
if (io_unit_pg3->GPIOCount < 25) {
ioc_err(ioc, "%s: iounit_pg3->GPIOCount less than 25 entries, detected (%d) entries\n",
__func__, io_unit_pg3->GPIOCount);
goto out;
}
/* BRM status is in bit zero of GPIOVal[24] */
backup_rail_monitor_status = le16_to_cpu(io_unit_pg3->GPIOVal[24]);
rc = snprintf(buf, PAGE_SIZE, "%d\n", (backup_rail_monitor_status & 1));
out:
kfree(io_unit_pg3);
mutex_unlock(&ioc->pci_access_mutex);
return rc;
}
static DEVICE_ATTR_RO(BRM_status);
struct DIAG_BUFFER_START {
__le32 Size;
__le32 DiagVersion;
u8 BufferType;
u8 Reserved[3];
__le32 Reserved1;
__le32 Reserved2;
__le32 Reserved3;
};
/**
* host_trace_buffer_size_show - host buffer size (trace only)
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
host_trace_buffer_size_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
u32 size = 0;
struct DIAG_BUFFER_START *request_data;
if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) {
ioc_err(ioc, "%s: host_trace_buffer is not registered\n",
__func__);
return 0;
}
if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
ioc_err(ioc, "%s: host_trace_buffer is not registered\n",
__func__);
return 0;
}
request_data = (struct DIAG_BUFFER_START *)
ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE];
if ((le32_to_cpu(request_data->DiagVersion) == 0x00000000 ||
le32_to_cpu(request_data->DiagVersion) == 0x01000000 ||
le32_to_cpu(request_data->DiagVersion) == 0x01010000) &&
le32_to_cpu(request_data->Reserved3) == 0x4742444c)
size = le32_to_cpu(request_data->Size);
ioc->ring_buffer_sz = size;
return snprintf(buf, PAGE_SIZE, "%d\n", size);
}
static DEVICE_ATTR_RO(host_trace_buffer_size);
/**
* host_trace_buffer_show - firmware ring buffer (trace only)
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* A sysfs 'read/write' shost attribute.
*
* You will only be able to read 4k bytes of ring buffer at a time.
* In order to read beyond 4k bytes, you will have to write out the
* offset to the same attribute, it will move the pointer.
*/
static ssize_t
host_trace_buffer_show(struct device *cdev, struct device_attribute *attr,
char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
void *request_data;
u32 size;
if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) {
ioc_err(ioc, "%s: host_trace_buffer is not registered\n",
__func__);
return 0;
}
if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
MPT3_DIAG_BUFFER_IS_REGISTERED) == 0) {
ioc_err(ioc, "%s: host_trace_buffer is not registered\n",
__func__);
return 0;
}
if (ioc->ring_buffer_offset > ioc->ring_buffer_sz)
return 0;
size = ioc->ring_buffer_sz - ioc->ring_buffer_offset;
size = (size >= PAGE_SIZE) ? (PAGE_SIZE - 1) : size;
request_data = ioc->diag_buffer[0] + ioc->ring_buffer_offset;
memcpy(buf, request_data, size);
return size;
}
static ssize_t
host_trace_buffer_store(struct device *cdev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
int val = 0;
if (sscanf(buf, "%d", &val) != 1)
return -EINVAL;
ioc->ring_buffer_offset = val;
return strlen(buf);
}
static DEVICE_ATTR_RW(host_trace_buffer);
/*****************************************/
/**
* host_trace_buffer_enable_show - firmware ring buffer (trace only)
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* A sysfs 'read/write' shost attribute.
*
* This is a mechnism to post/release host_trace_buffers
*/
static ssize_t
host_trace_buffer_enable_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
if ((!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) ||
((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
MPT3_DIAG_BUFFER_IS_REGISTERED) == 0))
return snprintf(buf, PAGE_SIZE, "off\n");
else if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
MPT3_DIAG_BUFFER_IS_RELEASED))
return snprintf(buf, PAGE_SIZE, "release\n");
else
return snprintf(buf, PAGE_SIZE, "post\n");
}
static ssize_t
host_trace_buffer_enable_store(struct device *cdev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
char str[10] = "";
struct mpt3_diag_register diag_register;
u8 issue_reset = 0;
/* don't allow post/release occurr while recovery is active */
if (ioc->shost_recovery || ioc->remove_host ||
ioc->pci_error_recovery || ioc->is_driver_loading)
return -EBUSY;
if (sscanf(buf, "%9s", str) != 1)
return -EINVAL;
if (!strcmp(str, "post")) {
/* exit out if host buffers are already posted */
if ((ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE]) &&
(ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
MPT3_DIAG_BUFFER_IS_REGISTERED) &&
((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
MPT3_DIAG_BUFFER_IS_RELEASED) == 0))
goto out;
memset(&diag_register, 0, sizeof(struct mpt3_diag_register));
ioc_info(ioc, "posting host trace buffers\n");
diag_register.buffer_type = MPI2_DIAG_BUF_TYPE_TRACE;
if (ioc->manu_pg11.HostTraceBufferMaxSizeKB != 0 &&
ioc->diag_buffer_sz[MPI2_DIAG_BUF_TYPE_TRACE] != 0) {
/* post the same buffer allocated previously */
diag_register.requested_buffer_size =
ioc->diag_buffer_sz[MPI2_DIAG_BUF_TYPE_TRACE];
} else
diag_register.requested_buffer_size = (1024 * 1024);
diag_register.unique_id = 0x7075900;
ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] = 0;
_ctl_diag_register_2(ioc, &diag_register);
} else if (!strcmp(str, "release")) {
/* exit out if host buffers are already released */
if (!ioc->diag_buffer[MPI2_DIAG_BUF_TYPE_TRACE])
goto out;
if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
MPT3_DIAG_BUFFER_IS_REGISTERED) == 0)
goto out;
if ((ioc->diag_buffer_status[MPI2_DIAG_BUF_TYPE_TRACE] &
MPT3_DIAG_BUFFER_IS_RELEASED))
goto out;
ioc_info(ioc, "releasing host trace buffer\n");
mpt3sas_send_diag_release(ioc, MPI2_DIAG_BUF_TYPE_TRACE,
&issue_reset);
}
out:
return strlen(buf);
}
static DEVICE_ATTR_RW(host_trace_buffer_enable);
/*********** diagnostic trigger suppport *********************************/
/**
* diag_trigger_master_show - show the diag_trigger_master attribute
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* A sysfs 'read/write' shost attribute.
*/
static ssize_t
diag_trigger_master_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
unsigned long flags;
ssize_t rc;
spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
rc = sizeof(struct SL_WH_MASTER_TRIGGER_T);
memcpy(buf, &ioc->diag_trigger_master, rc);
spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
return rc;
}
/**
* diag_trigger_master_store - store the diag_trigger_master attribute
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
* @count: ?
*
* A sysfs 'read/write' shost attribute.
*/
static ssize_t
diag_trigger_master_store(struct device *cdev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
unsigned long flags;
ssize_t rc;
spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
rc = min(sizeof(struct SL_WH_MASTER_TRIGGER_T), count);
memset(&ioc->diag_trigger_master, 0,
sizeof(struct SL_WH_MASTER_TRIGGER_T));
memcpy(&ioc->diag_trigger_master, buf, rc);
ioc->diag_trigger_master.MasterData |=
(MASTER_TRIGGER_FW_FAULT + MASTER_TRIGGER_ADAPTER_RESET);
spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
return rc;
}
static DEVICE_ATTR_RW(diag_trigger_master);
/**
* diag_trigger_event_show - show the diag_trigger_event attribute
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* A sysfs 'read/write' shost attribute.
*/
static ssize_t
diag_trigger_event_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
unsigned long flags;
ssize_t rc;
spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
rc = sizeof(struct SL_WH_EVENT_TRIGGERS_T);
memcpy(buf, &ioc->diag_trigger_event, rc);
spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
return rc;
}
/**
* diag_trigger_event_store - store the diag_trigger_event attribute
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
* @count: ?
*
* A sysfs 'read/write' shost attribute.
*/
static ssize_t
diag_trigger_event_store(struct device *cdev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
unsigned long flags;
ssize_t sz;
spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
sz = min(sizeof(struct SL_WH_EVENT_TRIGGERS_T), count);
memset(&ioc->diag_trigger_event, 0,
sizeof(struct SL_WH_EVENT_TRIGGERS_T));
memcpy(&ioc->diag_trigger_event, buf, sz);
if (ioc->diag_trigger_event.ValidEntries > NUM_VALID_ENTRIES)
ioc->diag_trigger_event.ValidEntries = NUM_VALID_ENTRIES;
spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
return sz;
}
static DEVICE_ATTR_RW(diag_trigger_event);
/**
* diag_trigger_scsi_show - show the diag_trigger_scsi attribute
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* A sysfs 'read/write' shost attribute.
*/
static ssize_t
diag_trigger_scsi_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
unsigned long flags;
ssize_t rc;
spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
rc = sizeof(struct SL_WH_SCSI_TRIGGERS_T);
memcpy(buf, &ioc->diag_trigger_scsi, rc);
spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
return rc;
}
/**
* diag_trigger_scsi_store - store the diag_trigger_scsi attribute
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
* @count: ?
*
* A sysfs 'read/write' shost attribute.
*/
static ssize_t
diag_trigger_scsi_store(struct device *cdev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
unsigned long flags;
ssize_t sz;
spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
sz = min(sizeof(ioc->diag_trigger_scsi), count);
memset(&ioc->diag_trigger_scsi, 0, sizeof(ioc->diag_trigger_scsi));
memcpy(&ioc->diag_trigger_scsi, buf, sz);
if (ioc->diag_trigger_scsi.ValidEntries > NUM_VALID_ENTRIES)
ioc->diag_trigger_scsi.ValidEntries = NUM_VALID_ENTRIES;
spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
return sz;
}
static DEVICE_ATTR_RW(diag_trigger_scsi);
/**
* diag_trigger_scsi_show - show the diag_trigger_mpi attribute
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* A sysfs 'read/write' shost attribute.
*/
static ssize_t
diag_trigger_mpi_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
unsigned long flags;
ssize_t rc;
spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
rc = sizeof(struct SL_WH_MPI_TRIGGERS_T);
memcpy(buf, &ioc->diag_trigger_mpi, rc);
spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
return rc;
}
/**
* diag_trigger_mpi_store - store the diag_trigger_mpi attribute
* @cdev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
* @count: ?
*
* A sysfs 'read/write' shost attribute.
*/
static ssize_t
diag_trigger_mpi_store(struct device *cdev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
unsigned long flags;
ssize_t sz;
spin_lock_irqsave(&ioc->diag_trigger_lock, flags);
sz = min(sizeof(struct SL_WH_MPI_TRIGGERS_T), count);
memset(&ioc->diag_trigger_mpi, 0,
sizeof(ioc->diag_trigger_mpi));
memcpy(&ioc->diag_trigger_mpi, buf, sz);
if (ioc->diag_trigger_mpi.ValidEntries > NUM_VALID_ENTRIES)
ioc->diag_trigger_mpi.ValidEntries = NUM_VALID_ENTRIES;
spin_unlock_irqrestore(&ioc->diag_trigger_lock, flags);
return sz;
}
static DEVICE_ATTR_RW(diag_trigger_mpi);
/*********** diagnostic trigger suppport *** END ****************************/
/*****************************************/
/**
* drv_support_bitmap_show - driver supported feature bitmap
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
drv_support_bitmap_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "0x%08x\n", ioc->drv_support_bitmap);
}
static DEVICE_ATTR_RO(drv_support_bitmap);
/**
* enable_sdev_max_qd_show - display whether sdev max qd is enabled/disabled
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* A sysfs read/write shost attribute. This attribute is used to set the
* targets queue depth to HBA IO queue depth if this attribute is enabled.
*/
static ssize_t
enable_sdev_max_qd_show(struct device *cdev,
struct device_attribute *attr, char *buf)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
return snprintf(buf, PAGE_SIZE, "%d\n", ioc->enable_sdev_max_qd);
}
/**
* enable_sdev_max_qd_store - Enable/disable sdev max qd
* @cdev - pointer to embedded class device
* @buf - the buffer returned
*
* A sysfs read/write shost attribute. This attribute is used to set the
* targets queue depth to HBA IO queue depth if this attribute is enabled.
* If this attribute is disabled then targets will have corresponding default
* queue depth.
*/
static ssize_t
enable_sdev_max_qd_store(struct device *cdev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct Scsi_Host *shost = class_to_shost(cdev);
struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
struct MPT3SAS_DEVICE *sas_device_priv_data;
struct MPT3SAS_TARGET *sas_target_priv_data;
int val = 0;
struct scsi_device *sdev;
struct _raid_device *raid_device;
int qdepth;
if (kstrtoint(buf, 0, &val) != 0)
return -EINVAL;
switch (val) {
case 0:
ioc->enable_sdev_max_qd = 0;
shost_for_each_device(sdev, ioc->shost) {
sas_device_priv_data = sdev->hostdata;
if (!sas_device_priv_data)
continue;
sas_target_priv_data = sas_device_priv_data->sas_target;
if (!sas_target_priv_data)
continue;
if (sas_target_priv_data->flags &
MPT_TARGET_FLAGS_VOLUME) {
raid_device =
mpt3sas_raid_device_find_by_handle(ioc,
sas_target_priv_data->handle);
switch (raid_device->volume_type) {
case MPI2_RAID_VOL_TYPE_RAID0:
if (raid_device->device_info &
MPI2_SAS_DEVICE_INFO_SSP_TARGET)
qdepth =
MPT3SAS_SAS_QUEUE_DEPTH;
else
qdepth =
MPT3SAS_SATA_QUEUE_DEPTH;
break;
case MPI2_RAID_VOL_TYPE_RAID1E:
case MPI2_RAID_VOL_TYPE_RAID1:
case MPI2_RAID_VOL_TYPE_RAID10:
case MPI2_RAID_VOL_TYPE_UNKNOWN:
default:
qdepth = MPT3SAS_RAID_QUEUE_DEPTH;
}
} else if (sas_target_priv_data->flags &
MPT_TARGET_FLAGS_PCIE_DEVICE)
qdepth = MPT3SAS_NVME_QUEUE_DEPTH;
else
qdepth = MPT3SAS_SAS_QUEUE_DEPTH;
mpt3sas_scsih_change_queue_depth(sdev, qdepth);
}
break;
case 1:
ioc->enable_sdev_max_qd = 1;
shost_for_each_device(sdev, ioc->shost)
mpt3sas_scsih_change_queue_depth(sdev,
shost->can_queue);
break;
default:
return -EINVAL;
}
return strlen(buf);
}
static DEVICE_ATTR_RW(enable_sdev_max_qd);
struct device_attribute *mpt3sas_host_attrs[] = {
&dev_attr_version_fw,
&dev_attr_version_bios,
&dev_attr_version_mpi,
&dev_attr_version_product,
&dev_attr_version_nvdata_persistent,
&dev_attr_version_nvdata_default,
&dev_attr_board_name,
&dev_attr_board_assembly,
&dev_attr_board_tracer,
&dev_attr_io_delay,
&dev_attr_device_delay,
&dev_attr_logging_level,
&dev_attr_fwfault_debug,
&dev_attr_fw_queue_depth,
&dev_attr_host_sas_address,
&dev_attr_ioc_reset_count,
&dev_attr_host_trace_buffer_size,
&dev_attr_host_trace_buffer,
&dev_attr_host_trace_buffer_enable,
&dev_attr_reply_queue_count,
&dev_attr_diag_trigger_master,
&dev_attr_diag_trigger_event,
&dev_attr_diag_trigger_scsi,
&dev_attr_diag_trigger_mpi,
&dev_attr_drv_support_bitmap,
&dev_attr_BRM_status,
&dev_attr_enable_sdev_max_qd,
NULL,
};
/* device attributes */
/**
* sas_address_show - sas address
* @dev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* This is the sas address for the target
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
sas_address_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct scsi_device *sdev = to_scsi_device(dev);
struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
(unsigned long long)sas_device_priv_data->sas_target->sas_address);
}
static DEVICE_ATTR_RO(sas_address);
/**
* sas_device_handle_show - device handle
* @dev: pointer to embedded class device
* @attr: ?
* @buf: the buffer returned
*
* This is the firmware assigned device handle
*
* A sysfs 'read-only' shost attribute.
*/
static ssize_t
sas_device_handle_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct scsi_device *sdev = to_scsi_device(dev);
struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
return snprintf(buf, PAGE_SIZE, "0x%04x\n",
sas_device_priv_data->sas_target->handle);
}
static DEVICE_ATTR_RO(sas_device_handle);
/**
* sas_ncq_io_prio_show - send prioritized io commands to device
* @dev: pointer to embedded device
* @attr: ?
* @buf: the buffer returned
*
* A sysfs 'read/write' sdev attribute, only works with SATA
*/
static ssize_t
sas_ncq_prio_enable_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct scsi_device *sdev = to_scsi_device(dev);
struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
return snprintf(buf, PAGE_SIZE, "%d\n",
sas_device_priv_data->ncq_prio_enable);
}
static ssize_t
sas_ncq_prio_enable_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct scsi_device *sdev = to_scsi_device(dev);
struct MPT3SAS_DEVICE *sas_device_priv_data = sdev->hostdata;
bool ncq_prio_enable = 0;
if (kstrtobool(buf, &ncq_prio_enable))
return -EINVAL;
if (!scsih_ncq_prio_supp(sdev))
return -EINVAL;
sas_device_priv_data->ncq_prio_enable = ncq_prio_enable;
return strlen(buf);
}
static DEVICE_ATTR_RW(sas_ncq_prio_enable);
struct device_attribute *mpt3sas_dev_attrs[] = {
&dev_attr_sas_address,
&dev_attr_sas_device_handle,
&dev_attr_sas_ncq_prio_enable,
NULL,
};
/* file operations table for mpt3ctl device */
static const struct file_operations ctl_fops = {
.owner = THIS_MODULE,
.unlocked_ioctl = _ctl_ioctl,
.poll = _ctl_poll,
.fasync = _ctl_fasync,
#ifdef CONFIG_COMPAT
.compat_ioctl = _ctl_ioctl_compat,
#endif
};
/* file operations table for mpt2ctl device */
static const struct file_operations ctl_gen2_fops = {
.owner = THIS_MODULE,
.unlocked_ioctl = _ctl_mpt2_ioctl,
.poll = _ctl_poll,
.fasync = _ctl_fasync,
#ifdef CONFIG_COMPAT
.compat_ioctl = _ctl_mpt2_ioctl_compat,
#endif
};
static struct miscdevice ctl_dev = {
.minor = MPT3SAS_MINOR,
.name = MPT3SAS_DEV_NAME,
.fops = &ctl_fops,
};
static struct miscdevice gen2_ctl_dev = {
.minor = MPT2SAS_MINOR,
.name = MPT2SAS_DEV_NAME,
.fops = &ctl_gen2_fops,
};
/**
* mpt3sas_ctl_init - main entry point for ctl.
* @hbas_to_enumerate: ?
*/
void
mpt3sas_ctl_init(ushort hbas_to_enumerate)
{
async_queue = NULL;
/* Don't register mpt3ctl ioctl device if
* hbas_to_enumarate is one.
*/
if (hbas_to_enumerate != 1)
if (misc_register(&ctl_dev) < 0)
pr_err("%s can't register misc device [minor=%d]\n",
MPT3SAS_DRIVER_NAME, MPT3SAS_MINOR);
/* Don't register mpt3ctl ioctl device if
* hbas_to_enumarate is two.
*/
if (hbas_to_enumerate != 2)
if (misc_register(&gen2_ctl_dev) < 0)
pr_err("%s can't register misc device [minor=%d]\n",
MPT2SAS_DRIVER_NAME, MPT2SAS_MINOR);
init_waitqueue_head(&ctl_poll_wait);
}
/**
* mpt3sas_ctl_exit - exit point for ctl
* @hbas_to_enumerate: ?
*/
void
mpt3sas_ctl_exit(ushort hbas_to_enumerate)
{
struct MPT3SAS_ADAPTER *ioc;
int i;
list_for_each_entry(ioc, &mpt3sas_ioc_list, list) {
/* free memory associated to diag buffers */
for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
if (!ioc->diag_buffer[i])
continue;
if (!(ioc->diag_buffer_status[i] &
MPT3_DIAG_BUFFER_IS_REGISTERED))
continue;
if ((ioc->diag_buffer_status[i] &
MPT3_DIAG_BUFFER_IS_RELEASED))
continue;
dma_free_coherent(&ioc->pdev->dev,
ioc->diag_buffer_sz[i],
ioc->diag_buffer[i],
ioc->diag_buffer_dma[i]);
ioc->diag_buffer[i] = NULL;
ioc->diag_buffer_status[i] = 0;
}
kfree(ioc->event_log);
}
if (hbas_to_enumerate != 1)
misc_deregister(&ctl_dev);
if (hbas_to_enumerate != 2)
misc_deregister(&gen2_ctl_dev);
}
View Git Blame Copy Permalink