renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 15:43:59 +08:00
Code
d0464bcf12
linux-next/drivers/usb/dwc2/platform.c
John Youn d0464bcf12 usb: dwc2: Make PHY optional 
Fixes commit 09a75e8577
("usb: dwc2: refactor common low-level hw code to platform.c")

The above commit consolidated the low-level phy access into a common
location. This change introduced a check from the gadget requiring
that a PHY is specified. This requirement never existed on the host
side and broke some platforms when it was moved into platform.c.

The gadget doesn't require the PHY either so remove the check.

Acked-by: Eric Anholt <eric@anholt.net>
Reported-by: Stefan Wahren <info@lategoodbye.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: John Youn <johnyoun@synopsys.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 09a75e8577 ("usb: dwc2: refactor common low-level hw code to platform.c")
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-19 14:48:49 -06:00

482 lines
13 KiB
C
Raw Blame History

/*
* platform.c - DesignWare HS OTG Controller platform driver
*
* Copyright (C) Matthijs Kooijman <matthijs@stdin.nl>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The names of the above-listed copyright holders may not be used
* to endorse or promote products derived from this software without
* specific prior written permission.
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation; either version 2 of the License, or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
* IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/of_device.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <linux/usb/of.h>
#include "core.h"
#include "hcd.h"
#include "debug.h"
static const char dwc2_driver_name[] = "dwc2";
static const struct dwc2_core_params params_bcm2835 = {
.otg_cap = 0, /* HNP/SRP capable */
.otg_ver = 0, /* 1.3 */
.dma_enable = 1,
.dma_desc_enable = 0,
.speed = 0, /* High Speed */
.enable_dynamic_fifo = 1,
.en_multiple_tx_fifo = 1,
.host_rx_fifo_size = 774, /* 774 DWORDs */
.host_nperio_tx_fifo_size = 256, /* 256 DWORDs */
.host_perio_tx_fifo_size = 512, /* 512 DWORDs */
.max_transfer_size = 65535,
.max_packet_count = 511,
.host_channels = 8,
.phy_type = 1, /* UTMI */
.phy_utmi_width = 8, /* 8 bits */
.phy_ulpi_ddr = 0, /* Single */
.phy_ulpi_ext_vbus = 0,
.i2c_enable = 0,
.ulpi_fs_ls = 0,
.host_support_fs_ls_low_power = 0,
.host_ls_low_power_phy_clk = 0, /* 48 MHz */
.ts_dline = 0,
.reload_ctl = 0,
.ahbcfg = 0x10,
.uframe_sched = 0,
.external_id_pin_ctl = -1,
.hibernation = -1,
};
static const struct dwc2_core_params params_rk3066 = {
.otg_cap = 2, /* non-HNP/non-SRP */
.otg_ver = -1,
.dma_enable = -1,
.dma_desc_enable = 0,
.speed = -1,
.enable_dynamic_fifo = 1,
.en_multiple_tx_fifo = -1,
.host_rx_fifo_size = 520, /* 520 DWORDs */
.host_nperio_tx_fifo_size = 128, /* 128 DWORDs */
.host_perio_tx_fifo_size = 256, /* 256 DWORDs */
.max_transfer_size = 65535,
.max_packet_count = -1,
.host_channels = -1,
.phy_type = -1,
.phy_utmi_width = -1,
.phy_ulpi_ddr = -1,
.phy_ulpi_ext_vbus = -1,
.i2c_enable = -1,
.ulpi_fs_ls = -1,
.host_support_fs_ls_low_power = -1,
.host_ls_low_power_phy_clk = -1,
.ts_dline = -1,
.reload_ctl = -1,
.ahbcfg = GAHBCFG_HBSTLEN_INCR16 <<
GAHBCFG_HBSTLEN_SHIFT,
.uframe_sched = -1,
.external_id_pin_ctl = -1,
.hibernation = -1,
};
static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
{
struct platform_device *pdev = to_platform_device(hsotg->dev);
int ret;
ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
hsotg->supplies);
if (ret)
return ret;
ret = clk_prepare_enable(hsotg->clk);
if (ret)
return ret;
if (hsotg->uphy)
ret = usb_phy_init(hsotg->uphy);
else if (hsotg->plat && hsotg->plat->phy_init)
ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
else {
ret = phy_power_on(hsotg->phy);
if (ret == 0)
ret = phy_init(hsotg->phy);
}
return ret;
}
/**
* dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
* @hsotg: The driver state
*
* A wrapper for platform code responsible for controlling
* low-level USB platform resources (phy, clock, regulators)
*/
int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
{
int ret = __dwc2_lowlevel_hw_enable(hsotg);
if (ret == 0)
hsotg->ll_hw_enabled = true;
return ret;
}
static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
{
struct platform_device *pdev = to_platform_device(hsotg->dev);
int ret = 0;
if (hsotg->uphy)
usb_phy_shutdown(hsotg->uphy);
else if (hsotg->plat && hsotg->plat->phy_exit)
ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
else {
ret = phy_exit(hsotg->phy);
if (ret == 0)
ret = phy_power_off(hsotg->phy);
}
if (ret)
return ret;
clk_disable_unprepare(hsotg->clk);
ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
hsotg->supplies);
return ret;
}
/**
* dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources
* @hsotg: The driver state
*
* A wrapper for platform code responsible for controlling
* low-level USB platform resources (phy, clock, regulators)
*/
int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
{
int ret = __dwc2_lowlevel_hw_disable(hsotg);
if (ret == 0)
hsotg->ll_hw_enabled = false;
return ret;
}
static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
{
int i, ret;
/* Set default UTMI width */
hsotg->phyif = GUSBCFG_PHYIF16;
/*
* Attempt to find a generic PHY, then look for an old style
* USB PHY and then fall back to pdata
*/
hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy");
if (IS_ERR(hsotg->phy)) {
hsotg->phy = NULL;
hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2);
if (IS_ERR(hsotg->uphy))
hsotg->uphy = NULL;
else
hsotg->plat = dev_get_platdata(hsotg->dev);
}
if (hsotg->phy) {
/*
* If using the generic PHY framework, check if the PHY bus
* width is 8-bit and set the phyif appropriately.
*/
if (phy_get_bus_width(hsotg->phy) == 8)
hsotg->phyif = GUSBCFG_PHYIF8;
}
/* Clock */
hsotg->clk = devm_clk_get(hsotg->dev, "otg");
if (IS_ERR(hsotg->clk)) {
hsotg->clk = NULL;
dev_dbg(hsotg->dev, "cannot get otg clock\n");
}
/* Regulators */
for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i];
ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies),
hsotg->supplies);
if (ret) {
dev_err(hsotg->dev, "failed to request supplies: %d\n", ret);
return ret;
}
return 0;
}
/**
* dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
* DWC_otg driver
*
* @dev: Platform device
*
* This routine is called, for example, when the rmmod command is executed. The
* device may or may not be electrically present. If it is present, the driver
* stops device processing. Any resources used on behalf of this device are
* freed.
*/
static int dwc2_driver_remove(struct platform_device *dev)
{
struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
dwc2_debugfs_exit(hsotg);
if (hsotg->hcd_enabled)
dwc2_hcd_remove(hsotg);
if (hsotg->gadget_enabled)
dwc2_hsotg_remove(hsotg);
if (hsotg->ll_hw_enabled)
dwc2_lowlevel_hw_disable(hsotg);
return 0;
}
static const struct of_device_id dwc2_of_match_table[] = {
{ .compatible = "brcm,bcm2835-usb", .data = &params_bcm2835 },
{ .compatible = "rockchip,rk3066-usb", .data = &params_rk3066 },
{ .compatible = "snps,dwc2", .data = NULL },
{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
{},
};
MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
/**
* dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
* driver
*
* @dev: Platform device
*
* This routine creates the driver components required to control the device
* (core, HCD, and PCD) and initializes the device. The driver components are
* stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
* in the device private data. This allows the driver to access the dwc2_hsotg
* structure on subsequent calls to driver methods for this device.
*/
static int dwc2_driver_probe(struct platform_device *dev)
{
const struct of_device_id *match;
const struct dwc2_core_params *params;
struct dwc2_core_params defparams;
struct dwc2_hsotg *hsotg;
struct resource *res;
int retval;
int irq;
match = of_match_device(dwc2_of_match_table, &dev->dev);
if (match && match->data) {
params = match->data;
} else {
/* Default all params to autodetect */
dwc2_set_all_params(&defparams, -1);
params = &defparams;
/*
* Disable descriptor dma mode by default as the HW can support
* it, but does not support it for SPLIT transactions.
*/
defparams.dma_desc_enable = 0;
}
hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
if (!hsotg)
return -ENOMEM;
hsotg->dev = &dev->dev;
/*
* Use reasonable defaults so platforms don't have to provide these.
*/
if (!dev->dev.dma_mask)
dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
if (retval)
return retval;
irq = platform_get_irq(dev, 0);
if (irq < 0) {
dev_err(&dev->dev, "missing IRQ resource\n");
return irq;
}
dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
irq);
retval = devm_request_irq(hsotg->dev, irq,
dwc2_handle_common_intr, IRQF_SHARED,
dev_name(hsotg->dev), hsotg);
if (retval)
return retval;
res = platform_get_resource(dev, IORESOURCE_MEM, 0);
hsotg->regs = devm_ioremap_resource(&dev->dev, res);
if (IS_ERR(hsotg->regs))
return PTR_ERR(hsotg->regs);
dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
(unsigned long)res->start, hsotg->regs);
hsotg->dr_mode = usb_get_dr_mode(&dev->dev);
if (IS_ENABLED(CONFIG_USB_DWC2_HOST) &&
hsotg->dr_mode != USB_DR_MODE_HOST) {
hsotg->dr_mode = USB_DR_MODE_HOST;
dev_warn(hsotg->dev,
"Configuration mismatch. Forcing host mode\n");
} else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) &&
hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
hsotg->dr_mode = USB_DR_MODE_PERIPHERAL;
dev_warn(hsotg->dev,
"Configuration mismatch. Forcing peripheral mode\n");
}
retval = dwc2_lowlevel_hw_init(hsotg);
if (retval)
return retval;
spin_lock_init(&hsotg->lock);
hsotg->core_params = devm_kzalloc(&dev->dev,
sizeof(*hsotg->core_params), GFP_KERNEL);
if (!hsotg->core_params)
return -ENOMEM;
dwc2_set_all_params(hsotg->core_params, -1);
retval = dwc2_lowlevel_hw_enable(hsotg);
if (retval)
return retval;
/* Detect config values from hardware */
retval = dwc2_get_hwparams(hsotg);
if (retval)
goto error;
/* Validate parameter values */
dwc2_set_parameters(hsotg, params);
if (hsotg->dr_mode != USB_DR_MODE_HOST) {
retval = dwc2_gadget_init(hsotg, irq);
if (retval)
goto error;
hsotg->gadget_enabled = 1;
}
if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
retval = dwc2_hcd_init(hsotg, irq);
if (retval) {
if (hsotg->gadget_enabled)
dwc2_hsotg_remove(hsotg);
goto error;
}
hsotg->hcd_enabled = 1;
}
platform_set_drvdata(dev, hsotg);
dwc2_debugfs_init(hsotg);
/* Gadget code manages lowlevel hw on its own */
if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL)
dwc2_lowlevel_hw_disable(hsotg);
return 0;
error:
dwc2_lowlevel_hw_disable(hsotg);
return retval;
}
static int __maybe_unused dwc2_suspend(struct device *dev)
{
struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
int ret = 0;
if (dwc2_is_device_mode(dwc2))
dwc2_hsotg_suspend(dwc2);
if (dwc2->ll_hw_enabled)
ret = __dwc2_lowlevel_hw_disable(dwc2);
return ret;
}
static int __maybe_unused dwc2_resume(struct device *dev)
{
struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
int ret = 0;
if (dwc2->ll_hw_enabled) {
ret = __dwc2_lowlevel_hw_enable(dwc2);
if (ret)
return ret;
}
if (dwc2_is_device_mode(dwc2))
ret = dwc2_hsotg_resume(dwc2);
return ret;
}
static const struct dev_pm_ops dwc2_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume)
};
static struct platform_driver dwc2_platform_driver = {
.driver = {
.name = dwc2_driver_name,
.of_match_table = dwc2_of_match_table,
.pm = &dwc2_dev_pm_ops,
},
.probe = dwc2_driver_probe,
.remove = dwc2_driver_remove,
};
module_platform_driver(dwc2_platform_driver);
MODULE_DESCRIPTION("DESIGNWARE HS OTG Platform Glue");
MODULE_AUTHOR("Matthijs Kooijman <matthijs@stdin.nl>");
MODULE_LICENSE("Dual BSD/GPL");
View Git Blame Copy Permalink