renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 20:23:57 +08:00
Code
cf9b475d5f
linux-next/drivers/media/IR/ir-rc6-decoder.c
David Härdeman c216369e61 V4L/DVB: ir-core: move decoding state to ir_raw_event_ctrl 
This patch moves the state from each raw decoder into the
ir_raw_event_ctrl struct.

This allows the removal of code like this:

        spin_lock(&decoder_lock);
        list_for_each_entry(data, &decoder_list, list) {
                if (data->ir_dev == ir_dev)
                        break;
        }
        spin_unlock(&decoder_lock);
        return data;

which is currently run for each decoder on each event in order
to get the client-specific decoding state data.

In addition, ir decoding modules and ir driver module load
order is now independent. Centralizing the data also allows
for a nice code reduction of about 30% per raw decoder as
client lists and client registration callbacks are no longer
necessary (but still kept around for the benefit of the lirc
decoder).

Out-of-tree modules can still use a similar trick to what
the raw decoders did before this patch until they are merged.

Signed-off-by: David Härdeman <david@hardeman.nu>
Acked-by: Jarod Wilson <jarod@redhat.com>
Tested-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-02 14:55:15 -03:00

281 lines
6.7 KiB
C
Raw Blame History

/* ir-rc6-decoder.c - A decoder for the RC6 IR protocol
*
* Copyright (C) 2010 by David Härdeman <david@hardeman.nu>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "ir-core-priv.h"
/*
* This decoder currently supports:
* RC6-0-16 (standard toggle bit in header)
* RC6-6A-24 (no toggle bit)
* RC6-6A-32 (MCE version with toggle bit in body)
*/
#define RC6_UNIT 444444 /* us */
#define RC6_HEADER_NBITS 4 /* not including toggle bit */
#define RC6_0_NBITS 16
#define RC6_6A_SMALL_NBITS 24
#define RC6_6A_LARGE_NBITS 32
#define RC6_PREFIX_PULSE (6 * RC6_UNIT)
#define RC6_PREFIX_SPACE (2 * RC6_UNIT)
#define RC6_BIT_START (1 * RC6_UNIT)
#define RC6_BIT_END (1 * RC6_UNIT)
#define RC6_TOGGLE_START (2 * RC6_UNIT)
#define RC6_TOGGLE_END (2 * RC6_UNIT)
#define RC6_MODE_MASK 0x07 /* for the header bits */
#define RC6_STARTBIT_MASK 0x08 /* for the header bits */
#define RC6_6A_MCE_TOGGLE_MASK 0x8000 /* for the body bits */
enum rc6_mode {
RC6_MODE_0,
RC6_MODE_6A,
RC6_MODE_UNKNOWN,
};
enum rc6_state {
STATE_INACTIVE,
STATE_PREFIX_SPACE,
STATE_HEADER_BIT_START,
STATE_HEADER_BIT_END,
STATE_TOGGLE_START,
STATE_TOGGLE_END,
STATE_BODY_BIT_START,
STATE_BODY_BIT_END,
STATE_FINISHED,
};
static enum rc6_mode rc6_mode(struct rc6_dec *data)
{
switch (data->header & RC6_MODE_MASK) {
case 0:
return RC6_MODE_0;
case 6:
if (!data->toggle)
return RC6_MODE_6A;
/* fall through */
default:
return RC6_MODE_UNKNOWN;
}
}
/**
* ir_rc6_decode() - Decode one RC6 pulse or space
* @input_dev: the struct input_dev descriptor of the device
* @ev: the struct ir_raw_event descriptor of the pulse/space
*
* This function returns -EINVAL if the pulse violates the state machine
*/
static int ir_rc6_decode(struct input_dev *input_dev, struct ir_raw_event ev)
{
struct ir_input_dev *ir_dev = input_get_drvdata(input_dev);
struct rc6_dec *data = &ir_dev->raw->rc6;
u32 scancode;
u8 toggle;
if (!(ir_dev->raw->enabled_protocols & IR_TYPE_RC6))
return 0;
if (IS_RESET(ev)) {
data->state = STATE_INACTIVE;
return 0;
}
if (!geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
goto out;
again:
IR_dprintk(2, "RC6 decode started at state %i (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
if (!geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
return 0;
switch (data->state) {
case STATE_INACTIVE:
if (!ev.pulse)
break;
/* Note: larger margin on first pulse since each RC6_UNIT
is quite short and some hardware takes some time to
adjust to the signal */
if (!eq_margin(ev.duration, RC6_PREFIX_PULSE, RC6_UNIT))
break;
data->state = STATE_PREFIX_SPACE;
data->count = 0;
return 0;
case STATE_PREFIX_SPACE:
if (ev.pulse)
break;
if (!eq_margin(ev.duration, RC6_PREFIX_SPACE, RC6_UNIT / 2))
break;
data->state = STATE_HEADER_BIT_START;
return 0;
case STATE_HEADER_BIT_START:
if (!eq_margin(ev.duration, RC6_BIT_START, RC6_UNIT / 2))
break;
data->header <<= 1;
if (ev.pulse)
data->header |= 1;
data->count++;
data->state = STATE_HEADER_BIT_END;
return 0;
case STATE_HEADER_BIT_END:
if (!is_transition(&ev, &ir_dev->raw->prev_ev))
break;
if (data->count == RC6_HEADER_NBITS)
data->state = STATE_TOGGLE_START;
else
data->state = STATE_HEADER_BIT_START;
decrease_duration(&ev, RC6_BIT_END);
goto again;
case STATE_TOGGLE_START:
if (!eq_margin(ev.duration, RC6_TOGGLE_START, RC6_UNIT / 2))
break;
data->toggle = ev.pulse;
data->state = STATE_TOGGLE_END;
return 0;
case STATE_TOGGLE_END:
if (!is_transition(&ev, &ir_dev->raw->prev_ev) ||
!geq_margin(ev.duration, RC6_TOGGLE_END, RC6_UNIT / 2))
break;
if (!(data->header & RC6_STARTBIT_MASK)) {
IR_dprintk(1, "RC6 invalid start bit\n");
break;
}
data->state = STATE_BODY_BIT_START;
decrease_duration(&ev, RC6_TOGGLE_END);
data->count = 0;
switch (rc6_mode(data)) {
case RC6_MODE_0:
data->wanted_bits = RC6_0_NBITS;
break;
case RC6_MODE_6A:
/* This might look weird, but we basically
check the value of the first body bit to
determine the number of bits in mode 6A */
if ((!ev.pulse && !geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2)) ||
geq_margin(ev.duration, RC6_UNIT, RC6_UNIT / 2))
data->wanted_bits = RC6_6A_LARGE_NBITS;
else
data->wanted_bits = RC6_6A_SMALL_NBITS;
break;
default:
IR_dprintk(1, "RC6 unknown mode\n");
goto out;
}
goto again;
case STATE_BODY_BIT_START:
if (!eq_margin(ev.duration, RC6_BIT_START, RC6_UNIT / 2))
break;
data->body <<= 1;
if (ev.pulse)
data->body |= 1;
data->count++;
data->state = STATE_BODY_BIT_END;
return 0;
case STATE_BODY_BIT_END:
if (!is_transition(&ev, &ir_dev->raw->prev_ev))
break;
if (data->count == data->wanted_bits)
data->state = STATE_FINISHED;
else
data->state = STATE_BODY_BIT_START;
decrease_duration(&ev, RC6_BIT_END);
goto again;
case STATE_FINISHED:
if (ev.pulse)
break;
switch (rc6_mode(data)) {
case RC6_MODE_0:
scancode = data->body & 0xffff;
toggle = data->toggle;
IR_dprintk(1, "RC6(0) scancode 0x%04x (toggle: %u)\n",
scancode, toggle);
break;
case RC6_MODE_6A:
if (data->wanted_bits == RC6_6A_LARGE_NBITS) {
toggle = data->body & RC6_6A_MCE_TOGGLE_MASK ? 1 : 0;
scancode = data->body & ~RC6_6A_MCE_TOGGLE_MASK;
} else {
toggle = 0;
scancode = data->body & 0xffffff;
}
IR_dprintk(1, "RC6(6A) scancode 0x%08x (toggle: %u)\n",
scancode, toggle);
break;
default:
IR_dprintk(1, "RC6 unknown mode\n");
goto out;
}
ir_keydown(input_dev, scancode, toggle);
data->state = STATE_INACTIVE;
return 0;
}
out:
IR_dprintk(1, "RC6 decode failed at state %i (%uus %s)\n",
data->state, TO_US(ev.duration), TO_STR(ev.pulse));
data->state = STATE_INACTIVE;
return -EINVAL;
}
static struct ir_raw_handler rc6_handler = {
.protocols = IR_TYPE_RC6,
.decode = ir_rc6_decode,
};
static int __init ir_rc6_decode_init(void)
{
ir_raw_handler_register(&rc6_handler);
printk(KERN_INFO "IR RC6 protocol handler initialized\n");
return 0;
}
static void __exit ir_rc6_decode_exit(void)
{
ir_raw_handler_unregister(&rc6_handler);
}
module_init(ir_rc6_decode_init);
module_exit(ir_rc6_decode_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("David Härdeman <david@hardeman.nu>");
MODULE_DESCRIPTION("RC6 IR protocol decoder");
View Git Blame Copy Permalink