renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 03:33:59 +08:00
Code
ce92d29ddf
linux-next/fs/xfs/xfs_log.c
Darrick J. Wong c96900435f xfs: use %px for data pointers when debugging 
Starting with commit 57e734423a ("vsprintf: refactor %pK code out of
pointer"), the behavior of the raw '%p' printk format specifier was
changed to print a 32-bit hash of the pointer value to avoid leaking
kernel pointers into dmesg.  For most situations that's good.

This is /undesirable/ behavior when we're trying to debug XFS, however,
so define a PTR_FMT that prints the actual pointer when we're in debug
mode.

Note that %p for tracepoints still prints the raw pointer, so in the
long run we could consider rewriting some of these messages as
tracepoints.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2018-01-12 14:09:08 -08:00

4152 lines
115 KiB
C
Raw Blame History

/*
* Copyright (c) 2000-2005 Silicon Graphics, Inc.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_mount.h"
#include "xfs_errortag.h"
#include "xfs_error.h"
#include "xfs_trans.h"
#include "xfs_trans_priv.h"
#include "xfs_log.h"
#include "xfs_log_priv.h"
#include "xfs_log_recover.h"
#include "xfs_inode.h"
#include "xfs_trace.h"
#include "xfs_fsops.h"
#include "xfs_cksum.h"
#include "xfs_sysfs.h"
#include "xfs_sb.h"
kmem_zone_t *xfs_log_ticket_zone;
/* Local miscellaneous function prototypes */
STATIC int
xlog_commit_record(
struct xlog *log,
struct xlog_ticket *ticket,
struct xlog_in_core **iclog,
xfs_lsn_t *commitlsnp);
STATIC struct xlog *
xlog_alloc_log(
struct xfs_mount *mp,
struct xfs_buftarg *log_target,
xfs_daddr_t blk_offset,
int num_bblks);
STATIC int
xlog_space_left(
struct xlog *log,
atomic64_t *head);
STATIC int
xlog_sync(
struct xlog *log,
struct xlog_in_core *iclog);
STATIC void
xlog_dealloc_log(
struct xlog *log);
/* local state machine functions */
STATIC void xlog_state_done_syncing(xlog_in_core_t *iclog, int);
STATIC void
xlog_state_do_callback(
struct xlog *log,
int aborted,
struct xlog_in_core *iclog);
STATIC int
xlog_state_get_iclog_space(
struct xlog *log,
int len,
struct xlog_in_core **iclog,
struct xlog_ticket *ticket,
int *continued_write,
int *logoffsetp);
STATIC int
xlog_state_release_iclog(
struct xlog *log,
struct xlog_in_core *iclog);
STATIC void
xlog_state_switch_iclogs(
struct xlog *log,
struct xlog_in_core *iclog,
int eventual_size);
STATIC void
xlog_state_want_sync(
struct xlog *log,
struct xlog_in_core *iclog);
STATIC void
xlog_grant_push_ail(
struct xlog *log,
int need_bytes);
STATIC void
xlog_regrant_reserve_log_space(
struct xlog *log,
struct xlog_ticket *ticket);
STATIC void
xlog_ungrant_log_space(
struct xlog *log,
struct xlog_ticket *ticket);
#if defined(DEBUG)
STATIC void
xlog_verify_dest_ptr(
struct xlog *log,
void *ptr);
STATIC void
xlog_verify_grant_tail(
struct xlog *log);
STATIC void
xlog_verify_iclog(
struct xlog *log,
struct xlog_in_core *iclog,
int count,
bool syncing);
STATIC void
xlog_verify_tail_lsn(
struct xlog *log,
struct xlog_in_core *iclog,
xfs_lsn_t tail_lsn);
#else
#define xlog_verify_dest_ptr(a,b)
#define xlog_verify_grant_tail(a)
#define xlog_verify_iclog(a,b,c,d)
#define xlog_verify_tail_lsn(a,b,c)
#endif
STATIC int
xlog_iclogs_empty(
struct xlog *log);
static void
xlog_grant_sub_space(
struct xlog *log,
atomic64_t *head,
int bytes)
{
int64_t head_val = atomic64_read(head);
int64_t new, old;
do {
int cycle, space;
xlog_crack_grant_head_val(head_val, &cycle, &space);
space -= bytes;
if (space < 0) {
space += log->l_logsize;
cycle--;
}
old = head_val;
new = xlog_assign_grant_head_val(cycle, space);
head_val = atomic64_cmpxchg(head, old, new);
} while (head_val != old);
}
static void
xlog_grant_add_space(
struct xlog *log,
atomic64_t *head,
int bytes)
{
int64_t head_val = atomic64_read(head);
int64_t new, old;
do {
int tmp;
int cycle, space;
xlog_crack_grant_head_val(head_val, &cycle, &space);
tmp = log->l_logsize - space;
if (tmp > bytes)
space += bytes;
else {
space = bytes - tmp;
cycle++;
}
old = head_val;
new = xlog_assign_grant_head_val(cycle, space);
head_val = atomic64_cmpxchg(head, old, new);
} while (head_val != old);
}
STATIC void
xlog_grant_head_init(
struct xlog_grant_head *head)
{
xlog_assign_grant_head(&head->grant, 1, 0);
INIT_LIST_HEAD(&head->waiters);
spin_lock_init(&head->lock);
}
STATIC void
xlog_grant_head_wake_all(
struct xlog_grant_head *head)
{
struct xlog_ticket *tic;
spin_lock(&head->lock);
list_for_each_entry(tic, &head->waiters, t_queue)
wake_up_process(tic->t_task);
spin_unlock(&head->lock);
}
static inline int
xlog_ticket_reservation(
struct xlog *log,
struct xlog_grant_head *head,
struct xlog_ticket *tic)
{
if (head == &log->l_write_head) {
ASSERT(tic->t_flags & XLOG_TIC_PERM_RESERV);
return tic->t_unit_res;
} else {
if (tic->t_flags & XLOG_TIC_PERM_RESERV)
return tic->t_unit_res * tic->t_cnt;
else
return tic->t_unit_res;
}
}
STATIC bool
xlog_grant_head_wake(
struct xlog *log,
struct xlog_grant_head *head,
int *free_bytes)
{
struct xlog_ticket *tic;
int need_bytes;
list_for_each_entry(tic, &head->waiters, t_queue) {
need_bytes = xlog_ticket_reservation(log, head, tic);
if (*free_bytes < need_bytes)
return false;
*free_bytes -= need_bytes;
trace_xfs_log_grant_wake_up(log, tic);
wake_up_process(tic->t_task);
}
return true;
}
STATIC int
xlog_grant_head_wait(
struct xlog *log,
struct xlog_grant_head *head,
struct xlog_ticket *tic,
int need_bytes) __releases(&head->lock)
__acquires(&head->lock)
{
list_add_tail(&tic->t_queue, &head->waiters);
do {
if (XLOG_FORCED_SHUTDOWN(log))
goto shutdown;
xlog_grant_push_ail(log, need_bytes);
__set_current_state(TASK_UNINTERRUPTIBLE);
spin_unlock(&head->lock);
XFS_STATS_INC(log->l_mp, xs_sleep_logspace);
trace_xfs_log_grant_sleep(log, tic);
schedule();
trace_xfs_log_grant_wake(log, tic);
spin_lock(&head->lock);
if (XLOG_FORCED_SHUTDOWN(log))
goto shutdown;
} while (xlog_space_left(log, &head->grant) < need_bytes);
list_del_init(&tic->t_queue);
return 0;
shutdown:
list_del_init(&tic->t_queue);
return -EIO;
}
/*
* Atomically get the log space required for a log ticket.
*
* Once a ticket gets put onto head->waiters, it will only return after the
* needed reservation is satisfied.
*
* This function is structured so that it has a lock free fast path. This is
* necessary because every new transaction reservation will come through this
* path. Hence any lock will be globally hot if we take it unconditionally on
* every pass.
*
* As tickets are only ever moved on and off head->waiters under head->lock, we
* only need to take that lock if we are going to add the ticket to the queue
* and sleep. We can avoid taking the lock if the ticket was never added to
* head->waiters because the t_queue list head will be empty and we hold the
* only reference to it so it can safely be checked unlocked.
*/
STATIC int
xlog_grant_head_check(
struct xlog *log,
struct xlog_grant_head *head,
struct xlog_ticket *tic,
int *need_bytes)
{
int free_bytes;
int error = 0;
ASSERT(!(log->l_flags & XLOG_ACTIVE_RECOVERY));
/*
* If there are other waiters on the queue then give them a chance at
* logspace before us. Wake up the first waiters, if we do not wake
* up all the waiters then go to sleep waiting for more free space,
* otherwise try to get some space for this transaction.
*/
*need_bytes = xlog_ticket_reservation(log, head, tic);
free_bytes = xlog_space_left(log, &head->grant);
if (!list_empty_careful(&head->waiters)) {
spin_lock(&head->lock);
if (!xlog_grant_head_wake(log, head, &free_bytes) ||
free_bytes < *need_bytes) {
error = xlog_grant_head_wait(log, head, tic,
*need_bytes);
}
spin_unlock(&head->lock);
} else if (free_bytes < *need_bytes) {
spin_lock(&head->lock);
error = xlog_grant_head_wait(log, head, tic, *need_bytes);
spin_unlock(&head->lock);
}
return error;
}
static void
xlog_tic_reset_res(xlog_ticket_t *tic)
{
tic->t_res_num = 0;
tic->t_res_arr_sum = 0;
tic->t_res_num_ophdrs = 0;
}
static void
xlog_tic_add_region(xlog_ticket_t *tic, uint len, uint type)
{
if (tic->t_res_num == XLOG_TIC_LEN_MAX) {
/* add to overflow and start again */
tic->t_res_o_flow += tic->t_res_arr_sum;
tic->t_res_num = 0;
tic->t_res_arr_sum = 0;
}
tic->t_res_arr[tic->t_res_num].r_len = len;
tic->t_res_arr[tic->t_res_num].r_type = type;
tic->t_res_arr_sum += len;
tic->t_res_num++;
}
/*
* Replenish the byte reservation required by moving the grant write head.
*/
int
xfs_log_regrant(
struct xfs_mount *mp,
struct xlog_ticket *tic)
{
struct xlog *log = mp->m_log;
int need_bytes;
int error = 0;
if (XLOG_FORCED_SHUTDOWN(log))
return -EIO;
XFS_STATS_INC(mp, xs_try_logspace);
/*
* This is a new transaction on the ticket, so we need to change the
* transaction ID so that the next transaction has a different TID in
* the log. Just add one to the existing tid so that we can see chains
* of rolling transactions in the log easily.
*/
tic->t_tid++;
xlog_grant_push_ail(log, tic->t_unit_res);
tic->t_curr_res = tic->t_unit_res;
xlog_tic_reset_res(tic);
if (tic->t_cnt > 0)
return 0;
trace_xfs_log_regrant(log, tic);
error = xlog_grant_head_check(log, &log->l_write_head, tic,
&need_bytes);
if (error)
goto out_error;
xlog_grant_add_space(log, &log->l_write_head.grant, need_bytes);
trace_xfs_log_regrant_exit(log, tic);
xlog_verify_grant_tail(log);
return 0;
out_error:
/*
* If we are failing, make sure the ticket doesn't have any current
* reservations. We don't want to add this back when the ticket/
* transaction gets cancelled.
*/
tic->t_curr_res = 0;
tic->t_cnt = 0; /* ungrant will give back unit_res * t_cnt. */
return error;
}
/*
* Reserve log space and return a ticket corresponding the reservation.
*
* Each reservation is going to reserve extra space for a log record header.
* When writes happen to the on-disk log, we don't subtract the length of the
* log record header from any reservation. By wasting space in each
* reservation, we prevent over allocation problems.
*/
int
xfs_log_reserve(
struct xfs_mount *mp,
int unit_bytes,
int cnt,
struct xlog_ticket **ticp,
uint8_t client,
bool permanent)
{
struct xlog *log = mp->m_log;
struct xlog_ticket *tic;
int need_bytes;
int error = 0;
ASSERT(client == XFS_TRANSACTION || client == XFS_LOG);
if (XLOG_FORCED_SHUTDOWN(log))
return -EIO;
XFS_STATS_INC(mp, xs_try_logspace);
ASSERT(*ticp == NULL);
tic = xlog_ticket_alloc(log, unit_bytes, cnt, client, permanent,
KM_SLEEP | KM_MAYFAIL);
if (!tic)
return -ENOMEM;
*ticp = tic;
xlog_grant_push_ail(log, tic->t_cnt ? tic->t_unit_res * tic->t_cnt
: tic->t_unit_res);
trace_xfs_log_reserve(log, tic);
error = xlog_grant_head_check(log, &log->l_reserve_head, tic,
&need_bytes);
if (error)
goto out_error;
xlog_grant_add_space(log, &log->l_reserve_head.grant, need_bytes);
xlog_grant_add_space(log, &log->l_write_head.grant, need_bytes);
trace_xfs_log_reserve_exit(log, tic);
xlog_verify_grant_tail(log);
return 0;
out_error:
/*
* If we are failing, make sure the ticket doesn't have any current
* reservations. We don't want to add this back when the ticket/
* transaction gets cancelled.
*/
tic->t_curr_res = 0;
tic->t_cnt = 0; /* ungrant will give back unit_res * t_cnt. */
return error;
}
/*
* NOTES:
*
* 1. currblock field gets updated at startup and after in-core logs
* marked as with WANT_SYNC.
*/
/*
* This routine is called when a user of a log manager ticket is done with
* the reservation. If the ticket was ever used, then a commit record for
* the associated transaction is written out as a log operation header with
* no data. The flag XLOG_TIC_INITED is set when the first write occurs with
* a given ticket. If the ticket was one with a permanent reservation, then
* a few operations are done differently. Permanent reservation tickets by
* default don't release the reservation. They just commit the current
* transaction with the belief that the reservation is still needed. A flag
* must be passed in before permanent reservations are actually released.
* When these type of tickets are not released, they need to be set into
* the inited state again. By doing this, a start record will be written
* out when the next write occurs.
*/
xfs_lsn_t
xfs_log_done(
struct xfs_mount *mp,
struct xlog_ticket *ticket,
struct xlog_in_core **iclog,
bool regrant)
{
struct xlog *log = mp->m_log;
xfs_lsn_t lsn = 0;
if (XLOG_FORCED_SHUTDOWN(log) ||
/*
* If nothing was ever written, don't write out commit record.
* If we get an error, just continue and give back the log ticket.
*/
(((ticket->t_flags & XLOG_TIC_INITED) == 0) &&
(xlog_commit_record(log, ticket, iclog, &lsn)))) {
lsn = (xfs_lsn_t) -1;
regrant = false;
}
if (!regrant) {
trace_xfs_log_done_nonperm(log, ticket);
/*
* Release ticket if not permanent reservation or a specific
* request has been made to release a permanent reservation.
*/
xlog_ungrant_log_space(log, ticket);
} else {
trace_xfs_log_done_perm(log, ticket);
xlog_regrant_reserve_log_space(log, ticket);
/* If this ticket was a permanent reservation and we aren't
* trying to release it, reset the inited flags; so next time
* we write, a start record will be written out.
*/
ticket->t_flags |= XLOG_TIC_INITED;
}
xfs_log_ticket_put(ticket);
return lsn;
}
/*
* Attaches a new iclog I/O completion callback routine during
* transaction commit. If the log is in error state, a non-zero
* return code is handed back and the caller is responsible for
* executing the callback at an appropriate time.
*/
int
xfs_log_notify(
struct xfs_mount *mp,
struct xlog_in_core *iclog,
xfs_log_callback_t *cb)
{
int abortflg;
spin_lock(&iclog->ic_callback_lock);
abortflg = (iclog->ic_state & XLOG_STATE_IOERROR);
if (!abortflg) {
ASSERT_ALWAYS((iclog->ic_state == XLOG_STATE_ACTIVE) ||
(iclog->ic_state == XLOG_STATE_WANT_SYNC));
cb->cb_next = NULL;
*(iclog->ic_callback_tail) = cb;
iclog->ic_callback_tail = &(cb->cb_next);
}
spin_unlock(&iclog->ic_callback_lock);
return abortflg;
}
int
xfs_log_release_iclog(
struct xfs_mount *mp,
struct xlog_in_core *iclog)
{
if (xlog_state_release_iclog(mp->m_log, iclog)) {
xfs_force_shutdown(mp, SHUTDOWN_LOG_IO_ERROR);
return -EIO;
}
return 0;
}
/*
* Mount a log filesystem
*
* mp - ubiquitous xfs mount point structure
* log_target - buftarg of on-disk log device
* blk_offset - Start block # where block size is 512 bytes (BBSIZE)
* num_bblocks - Number of BBSIZE blocks in on-disk log
*
* Return error or zero.
*/
int
xfs_log_mount(
xfs_mount_t *mp,
xfs_buftarg_t *log_target,
xfs_daddr_t blk_offset,
int num_bblks)
{
bool fatal = xfs_sb_version_hascrc(&mp->m_sb);
int error = 0;
int min_logfsbs;
if (!(mp->m_flags & XFS_MOUNT_NORECOVERY)) {
xfs_notice(mp, "Mounting V%d Filesystem",
XFS_SB_VERSION_NUM(&mp->m_sb));
} else {
xfs_notice(mp,
"Mounting V%d filesystem in no-recovery mode. Filesystem will be inconsistent.",
XFS_SB_VERSION_NUM(&mp->m_sb));
ASSERT(mp->m_flags & XFS_MOUNT_RDONLY);
}
mp->m_log = xlog_alloc_log(mp, log_target, blk_offset, num_bblks);
if (IS_ERR(mp->m_log)) {
error = PTR_ERR(mp->m_log);
goto out;
}
/*
* Validate the given log space and drop a critical message via syslog
* if the log size is too small that would lead to some unexpected
* situations in transaction log space reservation stage.
*
* Note: we can't just reject the mount if the validation fails. This
* would mean that people would have to downgrade their kernel just to
* remedy the situation as there is no way to grow the log (short of
* black magic surgery with xfs_db).
*
* We can, however, reject mounts for CRC format filesystems, as the
* mkfs binary being used to make the filesystem should never create a
* filesystem with a log that is too small.
*/
min_logfsbs = xfs_log_calc_minimum_size(mp);
if (mp->m_sb.sb_logblocks < min_logfsbs) {
xfs_warn(mp,
"Log size %d blocks too small, minimum size is %d blocks",
mp->m_sb.sb_logblocks, min_logfsbs);
error = -EINVAL;
} else if (mp->m_sb.sb_logblocks > XFS_MAX_LOG_BLOCKS) {
xfs_warn(mp,
"Log size %d blocks too large, maximum size is %lld blocks",
mp->m_sb.sb_logblocks, XFS_MAX_LOG_BLOCKS);
error = -EINVAL;
} else if (XFS_FSB_TO_B(mp, mp->m_sb.sb_logblocks) > XFS_MAX_LOG_BYTES) {
xfs_warn(mp,
"log size %lld bytes too large, maximum size is %lld bytes",
XFS_FSB_TO_B(mp, mp->m_sb.sb_logblocks),
XFS_MAX_LOG_BYTES);
error = -EINVAL;
} else if (mp->m_sb.sb_logsunit > 1 &&
mp->m_sb.sb_logsunit % mp->m_sb.sb_blocksize) {
xfs_warn(mp,
"log stripe unit %u bytes must be a multiple of block size",
mp->m_sb.sb_logsunit);
error = -EINVAL;
fatal = true;
}
if (error) {
/*
* Log check errors are always fatal on v5; or whenever bad
* metadata leads to a crash.
*/
if (fatal) {
xfs_crit(mp, "AAIEEE! Log failed size checks. Abort!");
ASSERT(0);
goto out_free_log;
}
xfs_crit(mp, "Log size out of supported range.");
xfs_crit(mp,
"Continuing onwards, but if log hangs are experienced then please report this message in the bug report.");
}
/*
* Initialize the AIL now we have a log.
*/
error = xfs_trans_ail_init(mp);
if (error) {
xfs_warn(mp, "AIL initialisation failed: error %d", error);
goto out_free_log;
}
mp->m_log->l_ailp = mp->m_ail;
/*
* skip log recovery on a norecovery mount. pretend it all
* just worked.
*/
if (!(mp->m_flags & XFS_MOUNT_NORECOVERY)) {
int readonly = (mp->m_flags & XFS_MOUNT_RDONLY);
if (readonly)
mp->m_flags &= ~XFS_MOUNT_RDONLY;
error = xlog_recover(mp->m_log);
if (readonly)
mp->m_flags |= XFS_MOUNT_RDONLY;
if (error) {
xfs_warn(mp, "log mount/recovery failed: error %d",
error);
xlog_recover_cancel(mp->m_log);
goto out_destroy_ail;
}
}
error = xfs_sysfs_init(&mp->m_log->l_kobj, &xfs_log_ktype, &mp->m_kobj,
"log");
if (error)
goto out_destroy_ail;
/* Normal transactions can now occur */
mp->m_log->l_flags &= ~XLOG_ACTIVE_RECOVERY;
/*
* Now the log has been fully initialised and we know were our
* space grant counters are, we can initialise the permanent ticket
* needed for delayed logging to work.
*/
xlog_cil_init_post_recovery(mp->m_log);
return 0;
out_destroy_ail:
xfs_trans_ail_destroy(mp);
out_free_log:
xlog_dealloc_log(mp->m_log);
out:
return error;
}
/*
* Finish the recovery of the file system. This is separate from the
* xfs_log_mount() call, because it depends on the code in xfs_mountfs() to read
* in the root and real-time bitmap inodes between calling xfs_log_mount() and
* here.
*
* If we finish recovery successfully, start the background log work. If we are
* not doing recovery, then we have a RO filesystem and we don't need to start
* it.
*/
int
xfs_log_mount_finish(
struct xfs_mount *mp)
{
int error = 0;
bool readonly = (mp->m_flags & XFS_MOUNT_RDONLY);
bool recovered = mp->m_log->l_flags & XLOG_RECOVERY_NEEDED;
if (mp->m_flags & XFS_MOUNT_NORECOVERY) {
ASSERT(mp->m_flags & XFS_MOUNT_RDONLY);
return 0;
} else if (readonly) {
/* Allow unlinked processing to proceed */
mp->m_flags &= ~XFS_MOUNT_RDONLY;
}
/*
* During the second phase of log recovery, we need iget and
* iput to behave like they do for an active filesystem.
* xfs_fs_drop_inode needs to be able to prevent the deletion
* of inodes before we're done replaying log items on those
* inodes. Turn it off immediately after recovery finishes
* so that we don't leak the quota inodes if subsequent mount
* activities fail.
*
* We let all inodes involved in redo item processing end up on
* the LRU instead of being evicted immediately so that if we do
* something to an unlinked inode, the irele won't cause
* premature truncation and freeing of the inode, which results
* in log recovery failure. We have to evict the unreferenced
* lru inodes after clearing SB_ACTIVE because we don't
* otherwise clean up the lru if there's a subsequent failure in
* xfs_mountfs, which leads to us leaking the inodes if nothing
* else (e.g. quotacheck) references the inodes before the
* mount failure occurs.
*/
mp->m_super->s_flags |= SB_ACTIVE;
error = xlog_recover_finish(mp->m_log);
if (!error)
xfs_log_work_queue(mp);
mp->m_super->s_flags &= ~SB_ACTIVE;
evict_inodes(mp->m_super);
/*
* Drain the buffer LRU after log recovery. This is required for v4
* filesystems to avoid leaving around buffers with NULL verifier ops,
* but we do it unconditionally to make sure we're always in a clean
* cache state after mount.
*
* Don't push in the error case because the AIL may have pending intents
* that aren't removed until recovery is cancelled.
*/
if (!error && recovered) {
xfs_log_force(mp, XFS_LOG_SYNC);
xfs_ail_push_all_sync(mp->m_ail);
}
xfs_wait_buftarg(mp->m_ddev_targp);
if (readonly)
mp->m_flags |= XFS_MOUNT_RDONLY;
return error;
}
/*
* The mount has failed. Cancel the recovery if it hasn't completed and destroy
* the log.
*/
int
xfs_log_mount_cancel(
struct xfs_mount *mp)
{
int error;
error = xlog_recover_cancel(mp->m_log);
xfs_log_unmount(mp);
return error;
}
/*
* Final log writes as part of unmount.
*
* Mark the filesystem clean as unmount happens. Note that during relocation
* this routine needs to be executed as part of source-bag while the
* deallocation must not be done until source-end.
*/
/*
* Unmount record used to have a string "Unmount filesystem--" in the
* data section where the "Un" was really a magic number (XLOG_UNMOUNT_TYPE).
* We just write the magic number now since that particular field isn't
* currently architecture converted and "Unmount" is a bit foo.
* As far as I know, there weren't any dependencies on the old behaviour.
*/
static int
xfs_log_unmount_write(xfs_mount_t *mp)
{
struct xlog *log = mp->m_log;
xlog_in_core_t *iclog;
#ifdef DEBUG
xlog_in_core_t *first_iclog;
#endif
xlog_ticket_t *tic = NULL;
xfs_lsn_t lsn;
int error;
/*
* Don't write out unmount record on norecovery mounts or ro devices.
* Or, if we are doing a forced umount (typically because of IO errors).
*/
if (mp->m_flags & XFS_MOUNT_NORECOVERY ||
xfs_readonly_buftarg(log->l_mp->m_logdev_targp)) {
ASSERT(mp->m_flags & XFS_MOUNT_RDONLY);
return 0;
}
error = _xfs_log_force(mp, XFS_LOG_SYNC, NULL);
ASSERT(error || !(XLOG_FORCED_SHUTDOWN(log)));
#ifdef DEBUG
first_iclog = iclog = log->l_iclog;
do {
if (!(iclog->ic_state & XLOG_STATE_IOERROR)) {
ASSERT(iclog->ic_state & XLOG_STATE_ACTIVE);
ASSERT(iclog->ic_offset == 0);
}
iclog = iclog->ic_next;
} while (iclog != first_iclog);
#endif
if (! (XLOG_FORCED_SHUTDOWN(log))) {
error = xfs_log_reserve(mp, 600, 1, &tic, XFS_LOG, 0);
if (!error) {
/* the data section must be 32 bit size aligned */
struct {
uint16_t magic;
uint16_t pad1;
uint32_t pad2; /* may as well make it 64 bits */
} magic = {
.magic = XLOG_UNMOUNT_TYPE,
};
struct xfs_log_iovec reg = {
.i_addr = &magic,
.i_len = sizeof(magic),
.i_type = XLOG_REG_TYPE_UNMOUNT,
};
struct xfs_log_vec vec = {
.lv_niovecs = 1,
.lv_iovecp = &reg,
};
/* remove inited flag, and account for space used */
tic->t_flags = 0;
tic->t_curr_res -= sizeof(magic);
error = xlog_write(log, &vec, tic, &lsn,
NULL, XLOG_UNMOUNT_TRANS);
/*
* At this point, we're umounting anyway,
* so there's no point in transitioning log state
* to IOERROR. Just continue...
*/
}
if (error)
xfs_alert(mp, "%s: unmount record failed", __func__);
spin_lock(&log->l_icloglock);
iclog = log->l_iclog;
atomic_inc(&iclog->ic_refcnt);
xlog_state_want_sync(log, iclog);
spin_unlock(&log->l_icloglock);
error = xlog_state_release_iclog(log, iclog);
spin_lock(&log->l_icloglock);
if (!(iclog->ic_state == XLOG_STATE_ACTIVE ||
iclog->ic_state == XLOG_STATE_DIRTY)) {
if (!XLOG_FORCED_SHUTDOWN(log)) {
xlog_wait(&iclog->ic_force_wait,
&log->l_icloglock);
} else {
spin_unlock(&log->l_icloglock);
}
} else {
spin_unlock(&log->l_icloglock);
}
if (tic) {
trace_xfs_log_umount_write(log, tic);
xlog_ungrant_log_space(log, tic);
xfs_log_ticket_put(tic);
}
} else {
/*
* We're already in forced_shutdown mode, couldn't
* even attempt to write out the unmount transaction.
*
* Go through the motions of sync'ing and releasing
* the iclog, even though no I/O will actually happen,
* we need to wait for other log I/Os that may already
* be in progress. Do this as a separate section of
* code so we'll know if we ever get stuck here that
* we're in this odd situation of trying to unmount
* a file system that went into forced_shutdown as
* the result of an unmount..
*/
spin_lock(&log->l_icloglock);
iclog = log->l_iclog;
atomic_inc(&iclog->ic_refcnt);
xlog_state_want_sync(log, iclog);
spin_unlock(&log->l_icloglock);
error = xlog_state_release_iclog(log, iclog);
spin_lock(&log->l_icloglock);
if ( ! ( iclog->ic_state == XLOG_STATE_ACTIVE
|| iclog->ic_state == XLOG_STATE_DIRTY
|| iclog->ic_state == XLOG_STATE_IOERROR) ) {
xlog_wait(&iclog->ic_force_wait,
&log->l_icloglock);
} else {
spin_unlock(&log->l_icloglock);
}
}
return error;
} /* xfs_log_unmount_write */
/*
* Empty the log for unmount/freeze.
*
* To do this, we first need to shut down the background log work so it is not
* trying to cover the log as we clean up. We then need to unpin all objects in
* the log so we can then flush them out. Once they have completed their IO and
* run the callbacks removing themselves from the AIL, we can write the unmount
* record.
*/
void
xfs_log_quiesce(
struct xfs_mount *mp)
{
cancel_delayed_work_sync(&mp->m_log->l_work);
xfs_log_force(mp, XFS_LOG_SYNC);
/*
* The superblock buffer is uncached and while xfs_ail_push_all_sync()
* will push it, xfs_wait_buftarg() will not wait for it. Further,
* xfs_buf_iowait() cannot be used because it was pushed with the
* XBF_ASYNC flag set, so we need to use a lock/unlock pair to wait for
* the IO to complete.
*/
xfs_ail_push_all_sync(mp->m_ail);
xfs_wait_buftarg(mp->m_ddev_targp);
xfs_buf_lock(mp->m_sb_bp);
xfs_buf_unlock(mp->m_sb_bp);
xfs_log_unmount_write(mp);
}
/*
* Shut down and release the AIL and Log.
*
* During unmount, we need to ensure we flush all the dirty metadata objects
* from the AIL so that the log is empty before we write the unmount record to
* the log. Once this is done, we can tear down the AIL and the log.
*/
void
xfs_log_unmount(
struct xfs_mount *mp)
{
xfs_log_quiesce(mp);
xfs_trans_ail_destroy(mp);
xfs_sysfs_del(&mp->m_log->l_kobj);
xlog_dealloc_log(mp->m_log);
}
void
xfs_log_item_init(
struct xfs_mount *mp,
struct xfs_log_item *item,
int type,
const struct xfs_item_ops *ops)
{
item->li_mountp = mp;
item->li_ailp = mp->m_ail;
item->li_type = type;
item->li_ops = ops;
item->li_lv = NULL;
INIT_LIST_HEAD(&item->li_ail);
INIT_LIST_HEAD(&item->li_cil);
}
/*
* Wake up processes waiting for log space after we have moved the log tail.
*/
void
xfs_log_space_wake(
struct xfs_mount *mp)
{
struct xlog *log = mp->m_log;
int free_bytes;
if (XLOG_FORCED_SHUTDOWN(log))
return;
if (!list_empty_careful(&log->l_write_head.waiters)) {
ASSERT(!(log->l_flags & XLOG_ACTIVE_RECOVERY));
spin_lock(&log->l_write_head.lock);
free_bytes = xlog_space_left(log, &log->l_write_head.grant);
xlog_grant_head_wake(log, &log->l_write_head, &free_bytes);
spin_unlock(&log->l_write_head.lock);
}
if (!list_empty_careful(&log->l_reserve_head.waiters)) {
ASSERT(!(log->l_flags & XLOG_ACTIVE_RECOVERY));
spin_lock(&log->l_reserve_head.lock);
free_bytes = xlog_space_left(log, &log->l_reserve_head.grant);
xlog_grant_head_wake(log, &log->l_reserve_head, &free_bytes);
spin_unlock(&log->l_reserve_head.lock);
}
}
/*
* Determine if we have a transaction that has gone to disk that needs to be
* covered. To begin the transition to the idle state firstly the log needs to
* be idle. That means the CIL, the AIL and the iclogs needs to be empty before
* we start attempting to cover the log.
*
* Only if we are then in a state where covering is needed, the caller is
* informed that dummy transactions are required to move the log into the idle
* state.
*
* If there are any items in the AIl or CIL, then we do not want to attempt to
* cover the log as we may be in a situation where there isn't log space
* available to run a dummy transaction and this can lead to deadlocks when the
* tail of the log is pinned by an item that is modified in the CIL. Hence
* there's no point in running a dummy transaction at this point because we
* can't start trying to idle the log until both the CIL and AIL are empty.
*/
static int
xfs_log_need_covered(xfs_mount_t *mp)
{
struct xlog *log = mp->m_log;
int needed = 0;
if (!xfs_fs_writable(mp, SB_FREEZE_WRITE))
return 0;
if (!xlog_cil_empty(log))
return 0;
spin_lock(&log->l_icloglock);
switch (log->l_covered_state) {
case XLOG_STATE_COVER_DONE:
case XLOG_STATE_COVER_DONE2:
case XLOG_STATE_COVER_IDLE:
break;
case XLOG_STATE_COVER_NEED:
case XLOG_STATE_COVER_NEED2:
if (xfs_ail_min_lsn(log->l_ailp))
break;
if (!xlog_iclogs_empty(log))
break;
needed = 1;
if (log->l_covered_state == XLOG_STATE_COVER_NEED)
log->l_covered_state = XLOG_STATE_COVER_DONE;
else
log->l_covered_state = XLOG_STATE_COVER_DONE2;
break;
default:
needed = 1;
break;
}
spin_unlock(&log->l_icloglock);
return needed;
}
/*
* We may be holding the log iclog lock upon entering this routine.
*/
xfs_lsn_t
xlog_assign_tail_lsn_locked(
struct xfs_mount *mp)
{
struct xlog *log = mp->m_log;
struct xfs_log_item *lip;
xfs_lsn_t tail_lsn;
assert_spin_locked(&mp->m_ail->xa_lock);
/*
* To make sure we always have a valid LSN for the log tail we keep
* track of the last LSN which was committed in log->l_last_sync_lsn,
* and use that when the AIL was empty.
*/
lip = xfs_ail_min(mp->m_ail);
if (lip)
tail_lsn = lip->li_lsn;
else
tail_lsn = atomic64_read(&log->l_last_sync_lsn);
trace_xfs_log_assign_tail_lsn(log, tail_lsn);
atomic64_set(&log->l_tail_lsn, tail_lsn);
return tail_lsn;
}
xfs_lsn_t
xlog_assign_tail_lsn(
struct xfs_mount *mp)
{
xfs_lsn_t tail_lsn;
spin_lock(&mp->m_ail->xa_lock);
tail_lsn = xlog_assign_tail_lsn_locked(mp);
spin_unlock(&mp->m_ail->xa_lock);
return tail_lsn;
}
/*
* Return the space in the log between the tail and the head. The head
* is passed in the cycle/bytes formal parms. In the special case where
* the reserve head has wrapped passed the tail, this calculation is no
* longer valid. In this case, just return 0 which means there is no space
* in the log. This works for all places where this function is called
* with the reserve head. Of course, if the write head were to ever
* wrap the tail, we should blow up. Rather than catch this case here,
* we depend on other ASSERTions in other parts of the code. XXXmiken
*
* This code also handles the case where the reservation head is behind
* the tail. The details of this case are described below, but the end
* result is that we return the size of the log as the amount of space left.
*/
STATIC int
xlog_space_left(
struct xlog *log,
atomic64_t *head)
{
int free_bytes;
int tail_bytes;
int tail_cycle;
int head_cycle;
int head_bytes;
xlog_crack_grant_head(head, &head_cycle, &head_bytes);
xlog_crack_atomic_lsn(&log->l_tail_lsn, &tail_cycle, &tail_bytes);
tail_bytes = BBTOB(tail_bytes);
if (tail_cycle == head_cycle && head_bytes >= tail_bytes)
free_bytes = log->l_logsize - (head_bytes - tail_bytes);
else if (tail_cycle + 1 < head_cycle)
return 0;
else if (tail_cycle < head_cycle) {
ASSERT(tail_cycle == (head_cycle - 1));
free_bytes = tail_bytes - head_bytes;
} else {
/*
* The reservation head is behind the tail.
* In this case we just want to return the size of the
* log as the amount of space left.
*/
xfs_alert(log->l_mp, "xlog_space_left: head behind tail");
xfs_alert(log->l_mp,
" tail_cycle = %d, tail_bytes = %d",
tail_cycle, tail_bytes);
xfs_alert(log->l_mp,
" GH cycle = %d, GH bytes = %d",
head_cycle, head_bytes);
ASSERT(0);
free_bytes = log->l_logsize;
}
return free_bytes;
}
/*
* Log function which is called when an io completes.
*
* The log manager needs its own routine, in order to control what
* happens with the buffer after the write completes.
*/
static void
xlog_iodone(xfs_buf_t *bp)
{
struct xlog_in_core *iclog = bp->b_fspriv;
struct xlog *l = iclog->ic_log;
int aborted = 0;
/*
* Race to shutdown the filesystem if we see an error or the iclog is in
* IOABORT state. The IOABORT state is only set in DEBUG mode to inject
* CRC errors into log recovery.
*/
if (XFS_TEST_ERROR(bp->b_error, l->l_mp, XFS_ERRTAG_IODONE_IOERR) ||
iclog->ic_state & XLOG_STATE_IOABORT) {
if (iclog->ic_state & XLOG_STATE_IOABORT)
iclog->ic_state &= ~XLOG_STATE_IOABORT;
xfs_buf_ioerror_alert(bp, __func__);
xfs_buf_stale(bp);
xfs_force_shutdown(l->l_mp, SHUTDOWN_LOG_IO_ERROR);
/*
* This flag will be propagated to the trans-committed
* callback routines to let them know that the log-commit
* didn't succeed.
*/
aborted = XFS_LI_ABORTED;
} else if (iclog->ic_state & XLOG_STATE_IOERROR) {
aborted = XFS_LI_ABORTED;
}
/* log I/O is always issued ASYNC */
ASSERT(bp->b_flags & XBF_ASYNC);
xlog_state_done_syncing(iclog, aborted);
/*
* drop the buffer lock now that we are done. Nothing references
* the buffer after this, so an unmount waiting on this lock can now
* tear it down safely. As such, it is unsafe to reference the buffer
* (bp) after the unlock as we could race with it being freed.
*/
xfs_buf_unlock(bp);
}
/*
* Return size of each in-core log record buffer.
*
* All machines get 8 x 32kB buffers by default, unless tuned otherwise.
*
* If the filesystem blocksize is too large, we may need to choose a
* larger size since the directory code currently logs entire blocks.
*/
STATIC void
xlog_get_iclog_buffer_size(
struct xfs_mount *mp,
struct xlog *log)
{
int size;
int xhdrs;
if (mp->m_logbufs <= 0)
log->l_iclog_bufs = XLOG_MAX_ICLOGS;
else
log->l_iclog_bufs = mp->m_logbufs;
/*
* Buffer size passed in from mount system call.
*/
if (mp->m_logbsize > 0) {
size = log->l_iclog_size = mp->m_logbsize;
log->l_iclog_size_log = 0;
while (size != 1) {
log->l_iclog_size_log++;
size >>= 1;
}
if (xfs_sb_version_haslogv2(&mp->m_sb)) {
/* # headers = size / 32k
* one header holds cycles from 32k of data
*/
xhdrs = mp->m_logbsize / XLOG_HEADER_CYCLE_SIZE;
if (mp->m_logbsize % XLOG_HEADER_CYCLE_SIZE)
xhdrs++;
log->l_iclog_hsize = xhdrs << BBSHIFT;
log->l_iclog_heads = xhdrs;
} else {
ASSERT(mp->m_logbsize <= XLOG_BIG_RECORD_BSIZE);
log->l_iclog_hsize = BBSIZE;
log->l_iclog_heads = 1;
}
goto done;
}
/* All machines use 32kB buffers by default. */
log->l_iclog_size = XLOG_BIG_RECORD_BSIZE;
log->l_iclog_size_log = XLOG_BIG_RECORD_BSHIFT;
/* the default log size is 16k or 32k which is one header sector */
log->l_iclog_hsize = BBSIZE;
log->l_iclog_heads = 1;
done:
/* are we being asked to make the sizes selected above visible? */
if (mp->m_logbufs == 0)
mp->m_logbufs = log->l_iclog_bufs;
if (mp->m_logbsize == 0)
mp->m_logbsize = log->l_iclog_size;
} /* xlog_get_iclog_buffer_size */
void
xfs_log_work_queue(
struct xfs_mount *mp)
{
queue_delayed_work(mp->m_sync_workqueue, &mp->m_log->l_work,
msecs_to_jiffies(xfs_syncd_centisecs * 10));
}
/*
* Every sync period we need to unpin all items in the AIL and push them to
* disk. If there is nothing dirty, then we might need to cover the log to
* indicate that the filesystem is idle.
*/
static void
xfs_log_worker(
struct work_struct *work)
{
struct xlog *log = container_of(to_delayed_work(work),
struct xlog, l_work);
struct xfs_mount *mp = log->l_mp;
/* dgc: errors ignored - not fatal and nowhere to report them */
if (xfs_log_need_covered(mp)) {
/*
* Dump a transaction into the log that contains no real change.
* This is needed to stamp the current tail LSN into the log
* during the covering operation.
*
* We cannot use an inode here for this - that will push dirty
* state back up into the VFS and then periodic inode flushing
* will prevent log covering from making progress. Hence we
* synchronously log the superblock instead to ensure the
* superblock is immediately unpinned and can be written back.
*/
xfs_sync_sb(mp, true);
} else
xfs_log_force(mp, 0);
/* start pushing all the metadata that is currently dirty */
xfs_ail_push_all(mp->m_ail);
/* queue us up again */
xfs_log_work_queue(mp);
}
/*
* This routine initializes some of the log structure for a given mount point.
* Its primary purpose is to fill in enough, so recovery can occur. However,
* some other stuff may be filled in too.
*/
STATIC struct xlog *
xlog_alloc_log(
struct xfs_mount *mp,
struct xfs_buftarg *log_target,
xfs_daddr_t blk_offset,
int num_bblks)
{
struct xlog *log;
xlog_rec_header_t *head;
xlog_in_core_t **iclogp;
xlog_in_core_t *iclog, *prev_iclog=NULL;
xfs_buf_t *bp;
int i;
int error = -ENOMEM;
uint log2_size = 0;
log = kmem_zalloc(sizeof(struct xlog), KM_MAYFAIL);
if (!log) {
xfs_warn(mp, "Log allocation failed: No memory!");
goto out;
}
log->l_mp = mp;
log->l_targ = log_target;
log->l_logsize = BBTOB(num_bblks);
log->l_logBBstart = blk_offset;
log->l_logBBsize = num_bblks;
log->l_covered_state = XLOG_STATE_COVER_IDLE;
log->l_flags |= XLOG_ACTIVE_RECOVERY;
INIT_DELAYED_WORK(&log->l_work, xfs_log_worker);
log->l_prev_block = -1;
/* log->l_tail_lsn = 0x100000000LL; cycle = 1; current block = 0 */
xlog_assign_atomic_lsn(&log->l_tail_lsn, 1, 0);
xlog_assign_atomic_lsn(&log->l_last_sync_lsn, 1, 0);
log->l_curr_cycle = 1; /* 0 is bad since this is initial value */
xlog_grant_head_init(&log->l_reserve_head);
xlog_grant_head_init(&log->l_write_head);
error = -EFSCORRUPTED;
if (xfs_sb_version_hassector(&mp->m_sb)) {
log2_size = mp->m_sb.sb_logsectlog;
if (log2_size < BBSHIFT) {
xfs_warn(mp, "Log sector size too small (0x%x < 0x%x)",
log2_size, BBSHIFT);
goto out_free_log;
}
log2_size -= BBSHIFT;
if (log2_size > mp->m_sectbb_log) {
xfs_warn(mp, "Log sector size too large (0x%x > 0x%x)",
log2_size, mp->m_sectbb_log);
goto out_free_log;
}
/* for larger sector sizes, must have v2 or external log */
if (log2_size && log->l_logBBstart > 0 &&
!xfs_sb_version_haslogv2(&mp->m_sb)) {
xfs_warn(mp,
"log sector size (0x%x) invalid for configuration.",
log2_size);
goto out_free_log;
}
}
log->l_sectBBsize = 1 << log2_size;
xlog_get_iclog_buffer_size(mp, log);
/*
* Use a NULL block for the extra log buffer used during splits so that
* it will trigger errors if we ever try to do IO on it without first
* having set it up properly.
*/
error = -ENOMEM;
bp = xfs_buf_alloc(mp->m_logdev_targp, XFS_BUF_DADDR_NULL,
BTOBB(log->l_iclog_size), XBF_NO_IOACCT);
if (!bp)
goto out_free_log;
/*
* The iclogbuf buffer locks are held over IO but we are not going to do
* IO yet. Hence unlock the buffer so that the log IO path can grab it
* when appropriately.
*/
ASSERT(xfs_buf_islocked(bp));
xfs_buf_unlock(bp);
/* use high priority wq for log I/O completion */
bp->b_ioend_wq = mp->m_log_workqueue;
bp->b_iodone = xlog_iodone;
log->l_xbuf = bp;
spin_lock_init(&log->l_icloglock);
init_waitqueue_head(&log->l_flush_wait);
iclogp = &log->l_iclog;
/*
* The amount of memory to allocate for the iclog structure is
* rather funky due to the way the structure is defined. It is
* done this way so that we can use different sizes for machines
* with different amounts of memory. See the definition of
* xlog_in_core_t in xfs_log_priv.h for details.
*/
ASSERT(log->l_iclog_size >= 4096);
for (i=0; i < log->l_iclog_bufs; i++) {
*iclogp = kmem_zalloc(sizeof(xlog_in_core_t), KM_MAYFAIL);
if (!*iclogp)
goto out_free_iclog;
iclog = *iclogp;
iclog->ic_prev = prev_iclog;
prev_iclog = iclog;
bp = xfs_buf_get_uncached(mp->m_logdev_targp,
BTOBB(log->l_iclog_size),
XBF_NO_IOACCT);
if (!bp)
goto out_free_iclog;
ASSERT(xfs_buf_islocked(bp));
xfs_buf_unlock(bp);
/* use high priority wq for log I/O completion */
bp->b_ioend_wq = mp->m_log_workqueue;
bp->b_iodone = xlog_iodone;
iclog->ic_bp = bp;
iclog->ic_data = bp->b_addr;
#ifdef DEBUG
log->l_iclog_bak[i] = &iclog->ic_header;
#endif
head = &iclog->ic_header;
memset(head, 0, sizeof(xlog_rec_header_t));
head->h_magicno = cpu_to_be32(XLOG_HEADER_MAGIC_NUM);
head->h_version = cpu_to_be32(
xfs_sb_version_haslogv2(&log->l_mp->m_sb) ? 2 : 1);
head->h_size = cpu_to_be32(log->l_iclog_size);
/* new fields */
head->h_fmt = cpu_to_be32(XLOG_FMT);
memcpy(&head->h_fs_uuid, &mp->m_sb.sb_uuid, sizeof(uuid_t));
iclog->ic_size = BBTOB(bp->b_length) - log->l_iclog_hsize;
iclog->ic_state = XLOG_STATE_ACTIVE;
iclog->ic_log = log;
atomic_set(&iclog->ic_refcnt, 0);
spin_lock_init(&iclog->ic_callback_lock);
iclog->ic_callback_tail = &(iclog->ic_callback);
iclog->ic_datap = (char *)iclog->ic_data + log->l_iclog_hsize;
init_waitqueue_head(&iclog->ic_force_wait);
init_waitqueue_head(&iclog->ic_write_wait);
iclogp = &iclog->ic_next;
}
*iclogp = log->l_iclog; /* complete ring */
log->l_iclog->ic_prev = prev_iclog; /* re-write 1st prev ptr */
error = xlog_cil_init(log);
if (error)
goto out_free_iclog;
return log;
out_free_iclog:
for (iclog = log->l_iclog; iclog; iclog = prev_iclog) {
prev_iclog = iclog->ic_next;
if (iclog->ic_bp)
xfs_buf_free(iclog->ic_bp);
kmem_free(iclog);
}
spinlock_destroy(&log->l_icloglock);
xfs_buf_free(log->l_xbuf);
out_free_log:
kmem_free(log);
out:
return ERR_PTR(error);
} /* xlog_alloc_log */
/*
* Write out the commit record of a transaction associated with the given
* ticket. Return the lsn of the commit record.
*/
STATIC int
xlog_commit_record(
struct xlog *log,
struct xlog_ticket *ticket,
struct xlog_in_core **iclog,
xfs_lsn_t *commitlsnp)
{
struct xfs_mount *mp = log->l_mp;
int error;
struct xfs_log_iovec reg = {
.i_addr = NULL,
.i_len = 0,
.i_type = XLOG_REG_TYPE_COMMIT,
};
struct xfs_log_vec vec = {
.lv_niovecs = 1,
.lv_iovecp = &reg,
};
ASSERT_ALWAYS(iclog);
error = xlog_write(log, &vec, ticket, commitlsnp, iclog,
XLOG_COMMIT_TRANS);
if (error)
xfs_force_shutdown(mp, SHUTDOWN_LOG_IO_ERROR);
return error;
}
/*
* Push on the buffer cache code if we ever use more than 75% of the on-disk
* log space. This code pushes on the lsn which would supposedly free up
* the 25% which we want to leave free. We may need to adopt a policy which
* pushes on an lsn which is further along in the log once we reach the high
* water mark. In this manner, we would be creating a low water mark.
*/
STATIC void
xlog_grant_push_ail(
struct xlog *log,
int need_bytes)
{
xfs_lsn_t threshold_lsn = 0;
xfs_lsn_t last_sync_lsn;
int free_blocks;
int free_bytes;
int threshold_block;
int threshold_cycle;
int free_threshold;
ASSERT(BTOBB(need_bytes) < log->l_logBBsize);
free_bytes = xlog_space_left(log, &log->l_reserve_head.grant);
free_blocks = BTOBBT(free_bytes);
/*
* Set the threshold for the minimum number of free blocks in the
* log to the maximum of what the caller needs, one quarter of the
* log, and 256 blocks.
*/
free_threshold = BTOBB(need_bytes);
free_threshold = MAX(free_threshold, (log->l_logBBsize >> 2));
free_threshold = MAX(free_threshold, 256);
if (free_blocks >= free_threshold)
return;
xlog_crack_atomic_lsn(&log->l_tail_lsn, &threshold_cycle,
&threshold_block);
threshold_block += free_threshold;
if (threshold_block >= log->l_logBBsize) {
threshold_block -= log->l_logBBsize;
threshold_cycle += 1;
}
threshold_lsn = xlog_assign_lsn(threshold_cycle,
threshold_block);
/*
* Don't pass in an lsn greater than the lsn of the last
* log record known to be on disk. Use a snapshot of the last sync lsn
* so that it doesn't change between the compare and the set.
*/
last_sync_lsn = atomic64_read(&log->l_last_sync_lsn);
if (XFS_LSN_CMP(threshold_lsn, last_sync_lsn) > 0)
threshold_lsn = last_sync_lsn;
/*
* Get the transaction layer to kick the dirty buffers out to
* disk asynchronously. No point in trying to do this if
* the filesystem is shutting down.
*/
if (!XLOG_FORCED_SHUTDOWN(log))
xfs_ail_push(log->l_ailp, threshold_lsn);
}
/*
* Stamp cycle number in every block
*/
STATIC void
xlog_pack_data(
struct xlog *log,
struct xlog_in_core *iclog,
int roundoff)
{
int i, j, k;
int size = iclog->ic_offset + roundoff;
__be32 cycle_lsn;
char *dp;
cycle_lsn = CYCLE_LSN_DISK(iclog->ic_header.h_lsn);
dp = iclog->ic_datap;
for (i = 0; i < BTOBB(size); i++) {
if (i >= (XLOG_HEADER_CYCLE_SIZE / BBSIZE))
break;
iclog->ic_header.h_cycle_data[i] = *(__be32 *)dp;
*(__be32 *)dp = cycle_lsn;
dp += BBSIZE;
}
if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
xlog_in_core_2_t *xhdr = iclog->ic_data;
for ( ; i < BTOBB(size); i++) {
j = i / (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
k = i % (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
xhdr[j].hic_xheader.xh_cycle_data[k] = *(__be32 *)dp;
*(__be32 *)dp = cycle_lsn;
dp += BBSIZE;
}
for (i = 1; i < log->l_iclog_heads; i++)
xhdr[i].hic_xheader.xh_cycle = cycle_lsn;
}
}
/*
* Calculate the checksum for a log buffer.
*
* This is a little more complicated than it should be because the various
* headers and the actual data are non-contiguous.
*/
__le32
xlog_cksum(
struct xlog *log,
struct xlog_rec_header *rhead,
char *dp,
int size)
{
uint32_t crc;
/* first generate the crc for the record header ... */
crc = xfs_start_cksum_update((char *)rhead,
sizeof(struct xlog_rec_header),
offsetof(struct xlog_rec_header, h_crc));
/* ... then for additional cycle data for v2 logs ... */
if (xfs_sb_version_haslogv2(&log->l_mp->m_sb)) {
union xlog_in_core2 *xhdr = (union xlog_in_core2 *)rhead;
int i;
int xheads;
xheads = size / XLOG_HEADER_CYCLE_SIZE;
if (size % XLOG_HEADER_CYCLE_SIZE)
xheads++;
for (i = 1; i < xheads; i++) {
crc = crc32c(crc, &xhdr[i].hic_xheader,
sizeof(struct xlog_rec_ext_header));
}
}
/* ... and finally for the payload */
crc = crc32c(crc, dp, size);
return xfs_end_cksum(crc);
}
/*
* The bdstrat callback function for log bufs. This gives us a central
* place to trap bufs in case we get hit by a log I/O error and need to
* shutdown. Actually, in practice, even when we didn't get a log error,
* we transition the iclogs to IOERROR state *after* flushing all existing
* iclogs to disk. This is because we don't want anymore new transactions to be
* started or completed afterwards.
*
* We lock the iclogbufs here so that we can serialise against IO completion
* during unmount. We might be processing a shutdown triggered during unmount,
* and that can occur asynchronously to the unmount thread, and hence we need to
* ensure that completes before tearing down the iclogbufs. Hence we need to
* hold the buffer lock across the log IO to acheive that.
*/
STATIC int
xlog_bdstrat(
struct xfs_buf *bp)
{
struct xlog_in_core *iclog = bp->b_fspriv;
xfs_buf_lock(bp);
if (iclog->ic_state & XLOG_STATE_IOERROR) {
xfs_buf_ioerror(bp, -EIO);
xfs_buf_stale(bp);
xfs_buf_ioend(bp);
/*
* It would seem logical to return EIO here, but we rely on
* the log state machine to propagate I/O errors instead of
* doing it here. Similarly, IO completion will unlock the
* buffer, so we don't do it here.
*/
return 0;
}
xfs_buf_submit(bp);
return 0;
}
/*
* Flush out the in-core log (iclog) to the on-disk log in an asynchronous
* fashion. Previously, we should have moved the current iclog
* ptr in the log to point to the next available iclog. This allows further
* write to continue while this code syncs out an iclog ready to go.
* Before an in-core log can be written out, the data section must be scanned
* to save away the 1st word of each BBSIZE block into the header. We replace
* it with the current cycle count. Each BBSIZE block is tagged with the
* cycle count because there in an implicit assumption that drives will
* guarantee that entire 512 byte blocks get written at once. In other words,
* we can't have part of a 512 byte block written and part not written. By
* tagging each block, we will know which blocks are valid when recovering
* after an unclean shutdown.
*
* This routine is single threaded on the iclog. No other thread can be in
* this routine with the same iclog. Changing contents of iclog can there-
* fore be done without grabbing the state machine lock. Updating the global
* log will require grabbing the lock though.
*
* The entire log manager uses a logical block numbering scheme. Only
* log_sync (and then only bwrite()) know about the fact that the log may
* not start with block zero on a given device. The log block start offset
* is added immediately before calling bwrite().
*/
STATIC int
xlog_sync(
struct xlog *log,
struct xlog_in_core *iclog)
{
xfs_buf_t *bp;
int i;
uint count; /* byte count of bwrite */
uint count_init; /* initial count before roundup */
int roundoff; /* roundoff to BB or stripe */
int split = 0; /* split write into two regions */
int error;
int v2 = xfs_sb_version_haslogv2(&log->l_mp->m_sb);
int size;
XFS_STATS_INC(log->l_mp, xs_log_writes);
ASSERT(atomic_read(&iclog->ic_refcnt) == 0);
/* Add for LR header */
count_init = log->l_iclog_hsize + iclog->ic_offset;
/* Round out the log write size */
if (v2 && log->l_mp->m_sb.sb_logsunit > 1) {
/* we have a v2 stripe unit to use */
count = XLOG_LSUNITTOB(log, XLOG_BTOLSUNIT(log, count_init));
} else {
count = BBTOB(BTOBB(count_init));
}
roundoff = count - count_init;
ASSERT(roundoff >= 0);
ASSERT((v2 && log->l_mp->m_sb.sb_logsunit > 1 &&
roundoff < log->l_mp->m_sb.sb_logsunit)
||
(log->l_mp->m_sb.sb_logsunit <= 1 &&
roundoff < BBTOB(1)));
/* move grant heads by roundoff in sync */
xlog_grant_add_space(log, &log->l_reserve_head.grant, roundoff);
xlog_grant_add_space(log, &log->l_write_head.grant, roundoff);
/* put cycle number in every block */
xlog_pack_data(log, iclog, roundoff);
/* real byte length */
size = iclog->ic_offset;
if (v2)
size += roundoff;
iclog->ic_header.h_len = cpu_to_be32(size);
bp = iclog->ic_bp;
XFS_BUF_SET_ADDR(bp, BLOCK_LSN(be64_to_cpu(iclog->ic_header.h_lsn)));
XFS_STATS_ADD(log->l_mp, xs_log_blocks, BTOBB(count));
/* Do we need to split this write into 2 parts? */
if (XFS_BUF_ADDR(bp) + BTOBB(count) > log->l_logBBsize) {
char *dptr;
split = count - (BBTOB(log->l_logBBsize - XFS_BUF_ADDR(bp)));
count = BBTOB(log->l_logBBsize - XFS_BUF_ADDR(bp));
iclog->ic_bwritecnt = 2;
/*
* Bump the cycle numbers at the start of each block in the
* part of the iclog that ends up in the buffer that gets
* written to the start of the log.
*
* Watch out for the header magic number case, though.
*/
dptr = (char *)&iclog->ic_header + count;
for (i = 0; i < split; i += BBSIZE) {
uint32_t cycle = be32_to_cpu(*(__be32 *)dptr);
if (++cycle == XLOG_HEADER_MAGIC_NUM)
cycle++;
*(__be32 *)dptr = cpu_to_be32(cycle);
dptr += BBSIZE;
}
} else {
iclog->ic_bwritecnt = 1;
}
/* calculcate the checksum */
iclog->ic_header.h_crc = xlog_cksum(log, &iclog->ic_header,
iclog->ic_datap, size);
/*
* Intentionally corrupt the log record CRC based on the error injection
* frequency, if defined. This facilitates testing log recovery in the
* event of torn writes. Hence, set the IOABORT state to abort the log
* write on I/O completion and shutdown the fs. The subsequent mount
* detects the bad CRC and attempts to recover.
*/
if (XFS_TEST_ERROR(false, log->l_mp, XFS_ERRTAG_LOG_BAD_CRC)) {
iclog->ic_header.h_crc &= cpu_to_le32(0xAAAAAAAA);
iclog->ic_state |= XLOG_STATE_IOABORT;
xfs_warn(log->l_mp,
"Intentionally corrupted log record at LSN 0x%llx. Shutdown imminent.",
be64_to_cpu(iclog->ic_header.h_lsn));
}
bp->b_io_length = BTOBB(count);
bp->b_fspriv = iclog;
bp->b_flags &= ~XBF_FLUSH;
bp->b_flags |= (XBF_ASYNC | XBF_SYNCIO | XBF_WRITE | XBF_FUA);
/*
* Flush the data device before flushing the log to make sure all meta
* data written back from the AIL actually made it to disk before
* stamping the new log tail LSN into the log buffer. For an external
* log we need to issue the flush explicitly, and unfortunately
* synchronously here; for an internal log we can simply use the block
* layer state machine for preflushes.
*/
if (log->l_mp->m_logdev_targp != log->l_mp->m_ddev_targp)
xfs_blkdev_issue_flush(log->l_mp->m_ddev_targp);
else
bp->b_flags |= XBF_FLUSH;
ASSERT(XFS_BUF_ADDR(bp) <= log->l_logBBsize-1);
ASSERT(XFS_BUF_ADDR(bp) + BTOBB(count) <= log->l_logBBsize);
xlog_verify_iclog(log, iclog, count, true);
/* account for log which doesn't start at block #0 */
XFS_BUF_SET_ADDR(bp, XFS_BUF_ADDR(bp) + log->l_logBBstart);
/*
* Don't call xfs_bwrite here. We do log-syncs even when the filesystem
* is shutting down.
*/
error = xlog_bdstrat(bp);
if (error) {
xfs_buf_ioerror_alert(bp, "xlog_sync");
return error;
}
if (split) {
bp = iclog->ic_log->l_xbuf;
XFS_BUF_SET_ADDR(bp, 0); /* logical 0 */
xfs_buf_associate_memory(bp,
(char *)&iclog->ic_header + count, split);
bp->b_fspriv = iclog;
bp->b_flags &= ~XBF_FLUSH;
bp->b_flags |= (XBF_ASYNC | XBF_SYNCIO | XBF_WRITE | XBF_FUA);
ASSERT(XFS_BUF_ADDR(bp) <= log->l_logBBsize-1);
ASSERT(XFS_BUF_ADDR(bp) + BTOBB(count) <= log->l_logBBsize);
/* account for internal log which doesn't start at block #0 */
XFS_BUF_SET_ADDR(bp, XFS_BUF_ADDR(bp) + log->l_logBBstart);
error = xlog_bdstrat(bp);
if (error) {
xfs_buf_ioerror_alert(bp, "xlog_sync (split)");
return error;
}
}
return 0;
} /* xlog_sync */
/*
* Deallocate a log structure
*/
STATIC void
xlog_dealloc_log(
struct xlog *log)
{
xlog_in_core_t *iclog, *next_iclog;
int i;
xlog_cil_destroy(log);
/*
* Cycle all the iclogbuf locks to make sure all log IO completion
* is done before we tear down these buffers.
*/
iclog = log->l_iclog;
for (i = 0; i < log->l_iclog_bufs; i++) {
xfs_buf_lock(iclog->ic_bp);
xfs_buf_unlock(iclog->ic_bp);
iclog = iclog->ic_next;
}
/*
* Always need to ensure that the extra buffer does not point to memory
* owned by another log buffer before we free it. Also, cycle the lock
* first to ensure we've completed IO on it.
*/
xfs_buf_lock(log->l_xbuf);
xfs_buf_unlock(log->l_xbuf);
xfs_buf_set_empty(log->l_xbuf, BTOBB(log->l_iclog_size));
xfs_buf_free(log->l_xbuf);
iclog = log->l_iclog;
for (i = 0; i < log->l_iclog_bufs; i++) {
xfs_buf_free(iclog->ic_bp);
next_iclog = iclog->ic_next;
kmem_free(iclog);
iclog = next_iclog;
}
spinlock_destroy(&log->l_icloglock);
log->l_mp->m_log = NULL;
kmem_free(log);
} /* xlog_dealloc_log */
/*
* Update counters atomically now that memcpy is done.
*/
/* ARGSUSED */
static inline void
xlog_state_finish_copy(
struct xlog *log,
struct xlog_in_core *iclog,
int record_cnt,
int copy_bytes)
{
spin_lock(&log->l_icloglock);
be32_add_cpu(&iclog->ic_header.h_num_logops, record_cnt);
iclog->ic_offset += copy_bytes;
spin_unlock(&log->l_icloglock);
} /* xlog_state_finish_copy */
/*
* print out info relating to regions written which consume
* the reservation
*/
void
xlog_print_tic_res(
struct xfs_mount *mp,
struct xlog_ticket *ticket)
{
uint i;
uint ophdr_spc = ticket->t_res_num_ophdrs * (uint)sizeof(xlog_op_header_t);
/* match with XLOG_REG_TYPE_* in xfs_log.h */
#define REG_TYPE_STR(type, str) [XLOG_REG_TYPE_##type] = str
static char *res_type_str[XLOG_REG_TYPE_MAX + 1] = {
REG_TYPE_STR(BFORMAT, "bformat"),
REG_TYPE_STR(BCHUNK, "bchunk"),
REG_TYPE_STR(EFI_FORMAT, "efi_format"),
REG_TYPE_STR(EFD_FORMAT, "efd_format"),
REG_TYPE_STR(IFORMAT, "iformat"),
REG_TYPE_STR(ICORE, "icore"),
REG_TYPE_STR(IEXT, "iext"),
REG_TYPE_STR(IBROOT, "ibroot"),
REG_TYPE_STR(ILOCAL, "ilocal"),
REG_TYPE_STR(IATTR_EXT, "iattr_ext"),
REG_TYPE_STR(IATTR_BROOT, "iattr_broot"),
REG_TYPE_STR(IATTR_LOCAL, "iattr_local"),
REG_TYPE_STR(QFORMAT, "qformat"),
REG_TYPE_STR(DQUOT, "dquot"),
REG_TYPE_STR(QUOTAOFF, "quotaoff"),
REG_TYPE_STR(LRHEADER, "LR header"),
REG_TYPE_STR(UNMOUNT, "unmount"),
REG_TYPE_STR(COMMIT, "commit"),
REG_TYPE_STR(TRANSHDR, "trans header"),
REG_TYPE_STR(ICREATE, "inode create")
};
#undef REG_TYPE_STR
xfs_warn(mp, "ticket reservation summary:");
xfs_warn(mp, " unit res = %d bytes",
ticket->t_unit_res);
xfs_warn(mp, " current res = %d bytes",
ticket->t_curr_res);
xfs_warn(mp, " total reg = %u bytes (o/flow = %u bytes)",
ticket->t_res_arr_sum, ticket->t_res_o_flow);
xfs_warn(mp, " ophdrs = %u (ophdr space = %u bytes)",
ticket->t_res_num_ophdrs, ophdr_spc);
xfs_warn(mp, " ophdr + reg = %u bytes",
ticket->t_res_arr_sum + ticket->t_res_o_flow + ophdr_spc);
xfs_warn(mp, " num regions = %u",
ticket->t_res_num);
for (i = 0; i < ticket->t_res_num; i++) {
uint r_type = ticket->t_res_arr[i].r_type;
xfs_warn(mp, "region[%u]: %s - %u bytes", i,
((r_type <= 0 || r_type > XLOG_REG_TYPE_MAX) ?
"bad-rtype" : res_type_str[r_type]),
ticket->t_res_arr[i].r_len);
}
}
/*
* Print a summary of the transaction.
*/
void
xlog_print_trans(
struct xfs_trans *tp)
{
struct xfs_mount *mp = tp->t_mountp;
struct xfs_log_item_desc *lidp;
/* dump core transaction and ticket info */
xfs_warn(mp, "transaction summary:");
xfs_warn(mp, " log res = %d", tp->t_log_res);
xfs_warn(mp, " log count = %d", tp->t_log_count);
xfs_warn(mp, " flags = 0x%x", tp->t_flags);
xlog_print_tic_res(mp, tp->t_ticket);
/* dump each log item */
list_for_each_entry(lidp, &tp->t_items, lid_trans) {
struct xfs_log_item *lip = lidp->lid_item;
struct xfs_log_vec *lv = lip->li_lv;
struct xfs_log_iovec *vec;
int i;
xfs_warn(mp, "log item: ");
xfs_warn(mp, " type = 0x%x", lip->li_type);
xfs_warn(mp, " flags = 0x%x", lip->li_flags);
if (!lv)
continue;
xfs_warn(mp, " niovecs = %d", lv->lv_niovecs);
xfs_warn(mp, " size = %d", lv->lv_size);
xfs_warn(mp, " bytes = %d", lv->lv_bytes);
xfs_warn(mp, " buf len = %d", lv->lv_buf_len);
/* dump each iovec for the log item */
vec = lv->lv_iovecp;
for (i = 0; i < lv->lv_niovecs; i++) {
int dumplen = min(vec->i_len, 32);
xfs_warn(mp, " iovec[%d]", i);
xfs_warn(mp, " type = 0x%x", vec->i_type);
xfs_warn(mp, " len = %d", vec->i_len);
xfs_warn(mp, " first %d bytes of iovec[%d]:", dumplen, i);
xfs_hex_dump(vec->i_addr, dumplen);
vec++;
}
}
}
/*
* Calculate the potential space needed by the log vector. Each region gets
* its own xlog_op_header_t and may need to be double word aligned.
*/
static int
xlog_write_calc_vec_length(
struct xlog_ticket *ticket,
struct xfs_log_vec *log_vector)
{
struct xfs_log_vec *lv;
int headers = 0;
int len = 0;
int i;
/* acct for start rec of xact */
if (ticket->t_flags & XLOG_TIC_INITED)
headers++;
for (lv = log_vector; lv; lv = lv->lv_next) {
/* we don't write ordered log vectors */
if (lv->lv_buf_len == XFS_LOG_VEC_ORDERED)
continue;
headers += lv->lv_niovecs;
for (i = 0; i < lv->lv_niovecs; i++) {
struct xfs_log_iovec *vecp = &lv->lv_iovecp[i];
len += vecp->i_len;
xlog_tic_add_region(ticket, vecp->i_len, vecp->i_type);
}
}
ticket->t_res_num_ophdrs += headers;
len += headers * sizeof(struct xlog_op_header);
return len;
}
/*
* If first write for transaction, insert start record We can't be trying to
* commit if we are inited. We can't have any "partial_copy" if we are inited.
*/
static int
xlog_write_start_rec(
struct xlog_op_header *ophdr,
struct xlog_ticket *ticket)
{
if (!(ticket->t_flags & XLOG_TIC_INITED))
return 0;
ophdr->oh_tid = cpu_to_be32(ticket->t_tid);
ophdr->oh_clientid = ticket->t_clientid;
ophdr->oh_len = 0;
ophdr->oh_flags = XLOG_START_TRANS;
ophdr->oh_res2 = 0;
ticket->t_flags &= ~XLOG_TIC_INITED;
return sizeof(struct xlog_op_header);
}
static xlog_op_header_t *
xlog_write_setup_ophdr(
struct xlog *log,
struct xlog_op_header *ophdr,
struct xlog_ticket *ticket,
uint flags)
{
ophdr->oh_tid = cpu_to_be32(ticket->t_tid);
ophdr->oh_clientid = ticket->t_clientid;
ophdr->oh_res2 = 0;
/* are we copying a commit or unmount record? */
ophdr->oh_flags = flags;
/*
* We've seen logs corrupted with bad transaction client ids. This
* makes sure that XFS doesn't generate them on. Turn this into an EIO
* and shut down the filesystem.
*/
switch (ophdr->oh_clientid) {
case XFS_TRANSACTION:
case XFS_VOLUME:
case XFS_LOG:
break;
default:
xfs_warn(log->l_mp,
"Bad XFS transaction clientid 0x%x in ticket "PTR_FMT,
ophdr->oh_clientid, ticket);
return NULL;
}
return ophdr;
}
/*
* Set up the parameters of the region copy into the log. This has
* to handle region write split across multiple log buffers - this
* state is kept external to this function so that this code can
* be written in an obvious, self documenting manner.
*/
static int
xlog_write_setup_copy(
struct xlog_ticket *ticket,
struct xlog_op_header *ophdr,
int space_available,
int space_required,
int *copy_off,
int *copy_len,
int *last_was_partial_copy,
int *bytes_consumed)
{
int still_to_copy;
still_to_copy = space_required - *bytes_consumed;
*copy_off = *bytes_consumed;
if (still_to_copy <= space_available) {
/* write of region completes here */
*copy_len = still_to_copy;
ophdr->oh_len = cpu_to_be32(*copy_len);
if (*last_was_partial_copy)
ophdr->oh_flags |= (XLOG_END_TRANS|XLOG_WAS_CONT_TRANS);
*last_was_partial_copy = 0;
*bytes_consumed = 0;
return 0;
}
/* partial write of region, needs extra log op header reservation */
*copy_len = space_available;
ophdr->oh_len = cpu_to_be32(*copy_len);
ophdr->oh_flags |= XLOG_CONTINUE_TRANS;
if (*last_was_partial_copy)
ophdr->oh_flags |= XLOG_WAS_CONT_TRANS;
*bytes_consumed += *copy_len;
(*last_was_partial_copy)++;
/* account for new log op header */
ticket->t_curr_res -= sizeof(struct xlog_op_header);
ticket->t_res_num_ophdrs++;
return sizeof(struct xlog_op_header);
}
static int
xlog_write_copy_finish(
struct xlog *log,
struct xlog_in_core *iclog,
uint flags,
int *record_cnt,
int *data_cnt,
int *partial_copy,
int *partial_copy_len,
int log_offset,
struct xlog_in_core **commit_iclog)
{
if (*partial_copy) {
/*
* This iclog has already been marked WANT_SYNC by
* xlog_state_get_iclog_space.
*/
xlog_state_finish_copy(log, iclog, *record_cnt, *data_cnt);
*record_cnt = 0;
*data_cnt = 0;
return xlog_state_release_iclog(log, iclog);
}
*partial_copy = 0;
*partial_copy_len = 0;
if (iclog->ic_size - log_offset <= sizeof(xlog_op_header_t)) {
/* no more space in this iclog - push it. */
xlog_state_finish_copy(log, iclog, *record_cnt, *data_cnt);
*record_cnt = 0;
*data_cnt = 0;
spin_lock(&log->l_icloglock);
xlog_state_want_sync(log, iclog);
spin_unlock(&log->l_icloglock);
if (!commit_iclog)
return xlog_state_release_iclog(log, iclog);
ASSERT(flags & XLOG_COMMIT_TRANS);
*commit_iclog = iclog;
}
return 0;
}
/*
* Write some region out to in-core log
*
* This will be called when writing externally provided regions or when
* writing out a commit record for a given transaction.
*
* General algorithm:
* 1. Find total length of this write. This may include adding to the
* lengths passed in.
* 2. Check whether we violate the tickets reservation.
* 3. While writing to this iclog
* A. Reserve as much space in this iclog as can get
* B. If this is first write, save away start lsn
* C. While writing this region:
* 1. If first write of transaction, write start record
* 2. Write log operation header (header per region)
* 3. Find out if we can fit entire region into this iclog
* 4. Potentially, verify destination memcpy ptr
* 5. Memcpy (partial) region
* 6. If partial copy, release iclog; otherwise, continue
* copying more regions into current iclog
* 4. Mark want sync bit (in simulation mode)
* 5. Release iclog for potential flush to on-disk log.
*
* ERRORS:
* 1. Panic if reservation is overrun. This should never happen since
* reservation amounts are generated internal to the filesystem.
* NOTES:
* 1. Tickets are single threaded data structures.
* 2. The XLOG_END_TRANS & XLOG_CONTINUE_TRANS flags are passed down to the
* syncing routine. When a single log_write region needs to span
* multiple in-core logs, the XLOG_CONTINUE_TRANS bit should be set
* on all log operation writes which don't contain the end of the
* region. The XLOG_END_TRANS bit is used for the in-core log
* operation which contains the end of the continued log_write region.
* 3. When xlog_state_get_iclog_space() grabs the rest of the current iclog,
* we don't really know exactly how much space will be used. As a result,
* we don't update ic_offset until the end when we know exactly how many
* bytes have been written out.
*/
int
xlog_write(
struct xlog *log,
struct xfs_log_vec *log_vector,
struct xlog_ticket *ticket,
xfs_lsn_t *start_lsn,
struct xlog_in_core **commit_iclog,
uint flags)
{
struct xlog_in_core *iclog = NULL;
struct xfs_log_iovec *vecp;
struct xfs_log_vec *lv;
int len;
int index;
int partial_copy = 0;
int partial_copy_len = 0;
int contwr = 0;
int record_cnt = 0;
int data_cnt = 0;
int error;
*start_lsn = 0;
len = xlog_write_calc_vec_length(ticket, log_vector);
/*
* Region headers and bytes are already accounted for.
* We only need to take into account start records and
* split regions in this function.
*/
if (ticket->t_flags & XLOG_TIC_INITED)
ticket->t_curr_res -= sizeof(xlog_op_header_t);
/*
* Commit record headers need to be accounted for. These
* come in as separate writes so are easy to detect.
*/
if (flags & (XLOG_COMMIT_TRANS | XLOG_UNMOUNT_TRANS))
ticket->t_curr_res -= sizeof(xlog_op_header_t);
if (ticket->t_curr_res < 0) {
xfs_alert_tag(log->l_mp, XFS_PTAG_LOGRES,
"ctx ticket reservation ran out. Need to up reservation");
xlog_print_tic_res(log->l_mp, ticket);
xfs_force_shutdown(log->l_mp, SHUTDOWN_LOG_IO_ERROR);
}
index = 0;
lv = log_vector;
vecp = lv->lv_iovecp;
while (lv && (!lv->lv_niovecs || index < lv->lv_niovecs)) {
void *ptr;
int log_offset;
error = xlog_state_get_iclog_space(log, len, &iclog, ticket,
&contwr, &log_offset);
if (error)
return error;
ASSERT(log_offset <= iclog->ic_size - 1);
ptr = iclog->ic_datap + log_offset;
/* start_lsn is the first lsn written to. That's all we need. */
if (!*start_lsn)
*start_lsn = be64_to_cpu(iclog->ic_header.h_lsn);
/*
* This loop writes out as many regions as can fit in the amount
* of space which was allocated by xlog_state_get_iclog_space().
*/
while (lv && (!lv->lv_niovecs || index < lv->lv_niovecs)) {
struct xfs_log_iovec *reg;
struct xlog_op_header *ophdr;
int start_rec_copy;
int copy_len;
int copy_off;
bool ordered = false;
/* ordered log vectors have no regions to write */
if (lv->lv_buf_len == XFS_LOG_VEC_ORDERED) {
ASSERT(lv->lv_niovecs == 0);
ordered = true;
goto next_lv;
}
reg = &vecp[index];
ASSERT(reg->i_len % sizeof(int32_t) == 0);
ASSERT((unsigned long)ptr % sizeof(int32_t) == 0);
start_rec_copy = xlog_write_start_rec(ptr, ticket);
if (start_rec_copy) {
record_cnt++;
xlog_write_adv_cnt(&ptr, &len, &log_offset,
start_rec_copy);
}
ophdr = xlog_write_setup_ophdr(log, ptr, ticket, flags);
if (!ophdr)
return -EIO;
xlog_write_adv_cnt(&ptr, &len, &log_offset,
sizeof(struct xlog_op_header));
len += xlog_write_setup_copy(ticket, ophdr,
iclog->ic_size-log_offset,
reg->i_len,
&copy_off, &copy_len,
&partial_copy,
&partial_copy_len);
xlog_verify_dest_ptr(log, ptr);
/*
* Copy region.
*
* Unmount records just log an opheader, so can have
* empty payloads with no data region to copy. Hence we
* only copy the payload if the vector says it has data
* to copy.
*/
ASSERT(copy_len >= 0);
if (copy_len > 0) {
memcpy(ptr, reg->i_addr + copy_off, copy_len);
xlog_write_adv_cnt(&ptr, &len, &log_offset,
copy_len);
}
copy_len += start_rec_copy + sizeof(xlog_op_header_t);
record_cnt++;
data_cnt += contwr ? copy_len : 0;
error = xlog_write_copy_finish(log, iclog, flags,
&record_cnt, &data_cnt,
&partial_copy,
&partial_copy_len,
log_offset,
commit_iclog);
if (error)
return error;
/*
* if we had a partial copy, we need to get more iclog
* space but we don't want to increment the region
* index because there is still more is this region to
* write.
*
* If we completed writing this region, and we flushed
* the iclog (indicated by resetting of the record
* count), then we also need to get more log space. If
* this was the last record, though, we are done and
* can just return.
*/
if (partial_copy)
break;
if (++index == lv->lv_niovecs) {
next_lv:
lv = lv->lv_next;
index = 0;
if (lv)
vecp = lv->lv_iovecp;
}
if (record_cnt == 0 && !ordered) {
if (!lv)
return 0;
break;
}
}
}
ASSERT(len == 0);
xlog_state_finish_copy(log, iclog, record_cnt, data_cnt);
if (!commit_iclog)
return xlog_state_release_iclog(log, iclog);
ASSERT(flags & XLOG_COMMIT_TRANS);
*commit_iclog = iclog;
return 0;
}
/*****************************************************************************
*
* State Machine functions
*
*****************************************************************************
*/
/* Clean iclogs starting from the head. This ordering must be
* maintained, so an iclog doesn't become ACTIVE beyond one that
* is SYNCING. This is also required to maintain the notion that we use
* a ordered wait queue to hold off would be writers to the log when every
* iclog is trying to sync to disk.
*
* State Change: DIRTY -> ACTIVE
*/
STATIC void
xlog_state_clean_log(
struct xlog *log)
{
xlog_in_core_t *iclog;
int changed = 0;
iclog = log->l_iclog;
do {
if (iclog->ic_state == XLOG_STATE_DIRTY) {
iclog->ic_state = XLOG_STATE_ACTIVE;
iclog->ic_offset = 0;
ASSERT(iclog->ic_callback == NULL);
/*
* If the number of ops in this iclog indicate it just
* contains the dummy transaction, we can
* change state into IDLE (the second time around).
* Otherwise we should change the state into
* NEED a dummy.
* We don't need to cover the dummy.
*/
if (!changed &&
(be32_to_cpu(iclog->ic_header.h_num_logops) ==
XLOG_COVER_OPS)) {
changed = 1;
} else {
/*
* We have two dirty iclogs so start over
* This could also be num of ops indicates
* this is not the dummy going out.
*/
changed = 2;
}
iclog->ic_header.h_num_logops = 0;
memset(iclog->ic_header.h_cycle_data, 0,
sizeof(iclog->ic_header.h_cycle_data));
iclog->ic_header.h_lsn = 0;
} else if (iclog->ic_state == XLOG_STATE_ACTIVE)
/* do nothing */;
else
break; /* stop cleaning */
iclog = iclog->ic_next;
} while (iclog != log->l_iclog);
/* log is locked when we are called */
/*
* Change state for the dummy log recording.
* We usually go to NEED. But we go to NEED2 if the changed indicates
* we are done writing the dummy record.
* If we are done with the second dummy recored (DONE2), then
* we go to IDLE.
*/
if (changed) {
switch (log->l_covered_state) {
case XLOG_STATE_COVER_IDLE:
case XLOG_STATE_COVER_NEED:
case XLOG_STATE_COVER_NEED2:
log->l_covered_state = XLOG_STATE_COVER_NEED;
break;
case XLOG_STATE_COVER_DONE:
if (changed == 1)
log->l_covered_state = XLOG_STATE_COVER_NEED2;
else
log->l_covered_state = XLOG_STATE_COVER_NEED;
break;
case XLOG_STATE_COVER_DONE2:
if (changed == 1)
log->l_covered_state = XLOG_STATE_COVER_IDLE;
else
log->l_covered_state = XLOG_STATE_COVER_NEED;
break;
default:
ASSERT(0);
}
}
} /* xlog_state_clean_log */
STATIC xfs_lsn_t
xlog_get_lowest_lsn(
struct xlog *log)
{
xlog_in_core_t *lsn_log;
xfs_lsn_t lowest_lsn, lsn;
lsn_log = log->l_iclog;
lowest_lsn = 0;
do {
if (!(lsn_log->ic_state & (XLOG_STATE_ACTIVE|XLOG_STATE_DIRTY))) {
lsn = be64_to_cpu(lsn_log->ic_header.h_lsn);
if ((lsn && !lowest_lsn) ||
(XFS_LSN_CMP(lsn, lowest_lsn) < 0)) {
lowest_lsn = lsn;
}
}
lsn_log = lsn_log->ic_next;
} while (lsn_log != log->l_iclog);
return lowest_lsn;
}
STATIC void
xlog_state_do_callback(
struct xlog *log,
int aborted,
struct xlog_in_core *ciclog)
{
xlog_in_core_t *iclog;
xlog_in_core_t *first_iclog; /* used to know when we've
* processed all iclogs once */
xfs_log_callback_t *cb, *cb_next;
int flushcnt = 0;
xfs_lsn_t lowest_lsn;
int ioerrors; /* counter: iclogs with errors */
int loopdidcallbacks; /* flag: inner loop did callbacks*/
int funcdidcallbacks; /* flag: function did callbacks */
int repeats; /* for issuing console warnings if
* looping too many times */
int wake = 0;
spin_lock(&log->l_icloglock);
first_iclog = iclog = log->l_iclog;
ioerrors = 0;
funcdidcallbacks = 0;
repeats = 0;
do {
/*
* Scan all iclogs starting with the one pointed to by the
* log. Reset this starting point each time the log is
* unlocked (during callbacks).
*
* Keep looping through iclogs until one full pass is made
* without running any callbacks.
*/
first_iclog = log->l_iclog;
iclog = log->l_iclog;
loopdidcallbacks = 0;
repeats++;
do {
/* skip all iclogs in the ACTIVE & DIRTY states */
if (iclog->ic_state &
(XLOG_STATE_ACTIVE|XLOG_STATE_DIRTY)) {
iclog = iclog->ic_next;
continue;
}
/*
* Between marking a filesystem SHUTDOWN and stopping
* the log, we do flush all iclogs to disk (if there
* wasn't a log I/O error). So, we do want things to
* go smoothly in case of just a SHUTDOWN w/o a
* LOG_IO_ERROR.
*/
if (!(iclog->ic_state & XLOG_STATE_IOERROR)) {
/*
* Can only perform callbacks in order. Since
* this iclog is not in the DONE_SYNC/
* DO_CALLBACK state, we skip the rest and
* just try to clean up. If we set our iclog
* to DO_CALLBACK, we will not process it when
* we retry since a previous iclog is in the
* CALLBACK and the state cannot change since
* we are holding the l_icloglock.
*/
if (!(iclog->ic_state &
(XLOG_STATE_DONE_SYNC |
XLOG_STATE_DO_CALLBACK))) {
if (ciclog && (ciclog->ic_state ==
XLOG_STATE_DONE_SYNC)) {
ciclog->ic_state = XLOG_STATE_DO_CALLBACK;
}
break;
}
/*
* We now have an iclog that is in either the
* DO_CALLBACK or DONE_SYNC states. The other
* states (WANT_SYNC, SYNCING, or CALLBACK were
* caught by the above if and are going to
* clean (i.e. we aren't doing their callbacks)
* see the above if.
*/
/*
* We will do one more check here to see if we
* have chased our tail around.
*/
lowest_lsn = xlog_get_lowest_lsn(log);
if (lowest_lsn &&
XFS_LSN_CMP(lowest_lsn,
be64_to_cpu(iclog->ic_header.h_lsn)) < 0) {
iclog = iclog->ic_next;
continue; /* Leave this iclog for
* another thread */
}
iclog->ic_state = XLOG_STATE_CALLBACK;
/*
* Completion of a iclog IO does not imply that
* a transaction has completed, as transactions
* can be large enough to span many iclogs. We
* cannot change the tail of the log half way
* through a transaction as this may be the only
* transaction in the log and moving th etail to
* point to the middle of it will prevent
* recovery from finding the start of the
* transaction. Hence we should only update the
* last_sync_lsn if this iclog contains
* transaction completion callbacks on it.
*
* We have to do this before we drop the
* icloglock to ensure we are the only one that
* can update it.
*/
ASSERT(XFS_LSN_CMP(atomic64_read(&log->l_last_sync_lsn),
be64_to_cpu(iclog->ic_header.h_lsn)) <= 0);
if (iclog->ic_callback)
atomic64_set(&log->l_last_sync_lsn,
be64_to_cpu(iclog->ic_header.h_lsn));
} else
ioerrors++;
spin_unlock(&log->l_icloglock);
/*
* Keep processing entries in the callback list until
* we come around and it is empty. We need to
* atomically see that the list is empty and change the
* state to DIRTY so that we don't miss any more
* callbacks being added.
*/
spin_lock(&iclog->ic_callback_lock);
cb = iclog->ic_callback;
while (cb) {
iclog->ic_callback_tail = &(iclog->ic_callback);
iclog->ic_callback = NULL;
spin_unlock(&iclog->ic_callback_lock);
/* perform callbacks in the order given */
for (; cb; cb = cb_next) {
cb_next = cb->cb_next;
cb->cb_func(cb->cb_arg, aborted);
}
spin_lock(&iclog->ic_callback_lock);
cb = iclog->ic_callback;
}
loopdidcallbacks++;
funcdidcallbacks++;
spin_lock(&log->l_icloglock);
ASSERT(iclog->ic_callback == NULL);
spin_unlock(&iclog->ic_callback_lock);
if (!(iclog->ic_state & XLOG_STATE_IOERROR))
iclog->ic_state = XLOG_STATE_DIRTY;
/*
* Transition from DIRTY to ACTIVE if applicable.
* NOP if STATE_IOERROR.
*/
xlog_state_clean_log(log);
/* wake up threads waiting in xfs_log_force() */
wake_up_all(&iclog->ic_force_wait);
iclog = iclog->ic_next;
} while (first_iclog != iclog);
if (repeats > 5000) {
flushcnt += repeats;
repeats = 0;
xfs_warn(log->l_mp,
"%s: possible infinite loop (%d iterations)",
__func__, flushcnt);
}
} while (!ioerrors && loopdidcallbacks);
#ifdef DEBUG
/*
* Make one last gasp attempt to see if iclogs are being left in limbo.
* If the above loop finds an iclog earlier than the current iclog and
* in one of the syncing states, the current iclog is put into
* DO_CALLBACK and the callbacks are deferred to the completion of the
* earlier iclog. Walk the iclogs in order and make sure that no iclog
* is in DO_CALLBACK unless an earlier iclog is in one of the syncing
* states.
*
* Note that SYNCING|IOABORT is a valid state so we cannot just check
* for ic_state == SYNCING.
*/
if (funcdidcallbacks) {
first_iclog = iclog = log->l_iclog;
do {
ASSERT(iclog->ic_state != XLOG_STATE_DO_CALLBACK);
/*
* Terminate the loop if iclogs are found in states
* which will cause other threads to clean up iclogs.
*
* SYNCING - i/o completion will go through logs
* DONE_SYNC - interrupt thread should be waiting for
* l_icloglock
* IOERROR - give up hope all ye who enter here
*/
if (iclog->ic_state == XLOG_STATE_WANT_SYNC ||
iclog->ic_state & XLOG_STATE_SYNCING ||
iclog->ic_state == XLOG_STATE_DONE_SYNC ||
iclog->ic_state == XLOG_STATE_IOERROR )
break;
iclog = iclog->ic_next;
} while (first_iclog != iclog);
}
#endif
if (log->l_iclog->ic_state & (XLOG_STATE_ACTIVE|XLOG_STATE_IOERROR))
wake = 1;
spin_unlock(&log->l_icloglock);
if (wake)
wake_up_all(&log->l_flush_wait);
}
/*
* Finish transitioning this iclog to the dirty state.
*
* Make sure that we completely execute this routine only when this is
* the last call to the iclog. There is a good chance that iclog flushes,
* when we reach the end of the physical log, get turned into 2 separate
* calls to bwrite. Hence, one iclog flush could generate two calls to this
* routine. By using the reference count bwritecnt, we guarantee that only
* the second completion goes through.
*
* Callbacks could take time, so they are done outside the scope of the
* global state machine log lock.
*/
STATIC void
xlog_state_done_syncing(
xlog_in_core_t *iclog,
int aborted)
{
struct xlog *log = iclog->ic_log;
spin_lock(&log->l_icloglock);
ASSERT(iclog->ic_state == XLOG_STATE_SYNCING ||
iclog->ic_state == XLOG_STATE_IOERROR);
ASSERT(atomic_read(&iclog->ic_refcnt) == 0);
ASSERT(iclog->ic_bwritecnt == 1 || iclog->ic_bwritecnt == 2);
/*
* If we got an error, either on the first buffer, or in the case of
* split log writes, on the second, we mark ALL iclogs STATE_IOERROR,
* and none should ever be attempted to be written to disk
* again.
*/
if (iclog->ic_state != XLOG_STATE_IOERROR) {
if (--iclog->ic_bwritecnt == 1) {
spin_unlock(&log->l_icloglock);
return;
}
iclog->ic_state = XLOG_STATE_DONE_SYNC;
}
/*
* Someone could be sleeping prior to writing out the next
* iclog buffer, we wake them all, one will get to do the
* I/O, the others get to wait for the result.
*/
wake_up_all(&iclog->ic_write_wait);
spin_unlock(&log->l_icloglock);
xlog_state_do_callback(log, aborted, iclog); /* also cleans log */
} /* xlog_state_done_syncing */
/*
* If the head of the in-core log ring is not (ACTIVE or DIRTY), then we must
* sleep. We wait on the flush queue on the head iclog as that should be
* the first iclog to complete flushing. Hence if all iclogs are syncing,
* we will wait here and all new writes will sleep until a sync completes.
*
* The in-core logs are used in a circular fashion. They are not used
* out-of-order even when an iclog past the head is free.
*
* return:
* * log_offset where xlog_write() can start writing into the in-core
* log's data space.
* * in-core log pointer to which xlog_write() should write.
* * boolean indicating this is a continued write to an in-core log.
* If this is the last write, then the in-core log's offset field
* needs to be incremented, depending on the amount of data which
* is copied.
*/
STATIC int
xlog_state_get_iclog_space(
struct xlog *log,
int len,
struct xlog_in_core **iclogp,
struct xlog_ticket *ticket,
int *continued_write,
int *logoffsetp)
{
int log_offset;
xlog_rec_header_t *head;
xlog_in_core_t *iclog;
int error;
restart:
spin_lock(&log->l_icloglock);
if (XLOG_FORCED_SHUTDOWN(log)) {
spin_unlock(&log->l_icloglock);
return -EIO;
}
iclog = log->l_iclog;
if (iclog->ic_state != XLOG_STATE_ACTIVE) {
XFS_STATS_INC(log->l_mp, xs_log_noiclogs);
/* Wait for log writes to have flushed */
xlog_wait(&log->l_flush_wait, &log->l_icloglock);
goto restart;
}
head = &iclog->ic_header;
atomic_inc(&iclog->ic_refcnt); /* prevents sync */
log_offset = iclog->ic_offset;
/* On the 1st write to an iclog, figure out lsn. This works
* if iclogs marked XLOG_STATE_WANT_SYNC always write out what they are
* committing to. If the offset is set, that's how many blocks
* must be written.
*/
if (log_offset == 0) {
ticket->t_curr_res -= log->l_iclog_hsize;
xlog_tic_add_region(ticket,
log->l_iclog_hsize,
XLOG_REG_TYPE_LRHEADER);
head->h_cycle = cpu_to_be32(log->l_curr_cycle);
head->h_lsn = cpu_to_be64(
xlog_assign_lsn(log->l_curr_cycle, log->l_curr_block));
ASSERT(log->l_curr_block >= 0);
}
/* If there is enough room to write everything, then do it. Otherwise,
* claim the rest of the region and make sure the XLOG_STATE_WANT_SYNC
* bit is on, so this will get flushed out. Don't update ic_offset
* until you know exactly how many bytes get copied. Therefore, wait
* until later to update ic_offset.
*
* xlog_write() algorithm assumes that at least 2 xlog_op_header_t's
* can fit into remaining data section.
*/
if (iclog->ic_size - iclog->ic_offset < 2*sizeof(xlog_op_header_t)) {
xlog_state_switch_iclogs(log, iclog, iclog->ic_size);
/*
* If I'm the only one writing to this iclog, sync it to disk.
* We need to do an atomic compare and decrement here to avoid
* racing with concurrent atomic_dec_and_lock() calls in
* xlog_state_release_iclog() when there is more than one
* reference to the iclog.
*/
if (!atomic_add_unless(&iclog->ic_refcnt, -1, 1)) {
/* we are the only one */
spin_unlock(&log->l_icloglock);
error = xlog_state_release_iclog(log, iclog);
if (error)
return error;
} else {
spin_unlock(&log->l_icloglock);
}
goto restart;
}
/* Do we have enough room to write the full amount in the remainder
* of this iclog? Or must we continue a write on the next iclog and
* mark this iclog as completely taken? In the case where we switch
* iclogs (to mark it taken), this particular iclog will release/sync
* to disk in xlog_write().
*/
if (len <= iclog->ic_size - iclog->ic_offset) {
*continued_write = 0;
iclog->ic_offset += len;
} else {
*continued_write = 1;
xlog_state_switch_iclogs(log, iclog, iclog->ic_size);
}
*iclogp = iclog;
ASSERT(iclog->ic_offset <= iclog->ic_size);
spin_unlock(&log->l_icloglock);
*logoffsetp = log_offset;
return 0;
} /* xlog_state_get_iclog_space */
/* The first cnt-1 times through here we don't need to
* move the grant write head because the permanent
* reservation has reserved cnt times the unit amount.
* Release part of current permanent unit reservation and
* reset current reservation to be one units worth. Also
* move grant reservation head forward.
*/
STATIC void
xlog_regrant_reserve_log_space(
struct xlog *log,
struct xlog_ticket *ticket)
{
trace_xfs_log_regrant_reserve_enter(log, ticket);
if (ticket->t_cnt > 0)
ticket->t_cnt--;
xlog_grant_sub_space(log, &log->l_reserve_head.grant,
ticket->t_curr_res);
xlog_grant_sub_space(log, &log->l_write_head.grant,
ticket->t_curr_res);
ticket->t_curr_res = ticket->t_unit_res;
xlog_tic_reset_res(ticket);
trace_xfs_log_regrant_reserve_sub(log, ticket);
/* just return if we still have some of the pre-reserved space */
if (ticket->t_cnt > 0)
return;
xlog_grant_add_space(log, &log->l_reserve_head.grant,
ticket->t_unit_res);
trace_xfs_log_regrant_reserve_exit(log, ticket);
ticket->t_curr_res = ticket->t_unit_res;
xlog_tic_reset_res(ticket);
} /* xlog_regrant_reserve_log_space */
/*
* Give back the space left from a reservation.
*
* All the information we need to make a correct determination of space left
* is present. For non-permanent reservations, things are quite easy. The
* count should have been decremented to zero. We only need to deal with the
* space remaining in the current reservation part of the ticket. If the
* ticket contains a permanent reservation, there may be left over space which
* needs to be released. A count of N means that N-1 refills of the current
* reservation can be done before we need to ask for more space. The first
* one goes to fill up the first current reservation. Once we run out of
* space, the count will stay at zero and the only space remaining will be
* in the current reservation field.
*/
STATIC void
xlog_ungrant_log_space(
struct xlog *log,
struct xlog_ticket *ticket)
{
int bytes;
if (ticket->t_cnt > 0)
ticket->t_cnt--;
trace_xfs_log_ungrant_enter(log, ticket);
trace_xfs_log_ungrant_sub(log, ticket);
/*
* If this is a permanent reservation ticket, we may be able to free
* up more space based on the remaining count.
*/
bytes = ticket->t_curr_res;
if (ticket->t_cnt > 0) {
ASSERT(ticket->t_flags & XLOG_TIC_PERM_RESERV);
bytes += ticket->t_unit_res*ticket->t_cnt;
}
xlog_grant_sub_space(log, &log->l_reserve_head.grant, bytes);
xlog_grant_sub_space(log, &log->l_write_head.grant, bytes);
trace_xfs_log_ungrant_exit(log, ticket);
xfs_log_space_wake(log->l_mp);
}
/*
* Flush iclog to disk if this is the last reference to the given iclog and
* the WANT_SYNC bit is set.
*
* When this function is entered, the iclog is not necessarily in the
* WANT_SYNC state. It may be sitting around waiting to get filled.
*
*
*/
STATIC int
xlog_state_release_iclog(
struct xlog *log,
struct xlog_in_core *iclog)
{
int sync = 0; /* do we sync? */
if (iclog->ic_state & XLOG_STATE_IOERROR)
return -EIO;
ASSERT(atomic_read(&iclog->ic_refcnt) > 0);
if (!atomic_dec_and_lock(&iclog->ic_refcnt, &log->l_icloglock))
return 0;
if (iclog->ic_state & XLOG_STATE_IOERROR) {
spin_unlock(&log->l_icloglock);
return -EIO;
}
ASSERT(iclog->ic_state == XLOG_STATE_ACTIVE ||
iclog->ic_state == XLOG_STATE_WANT_SYNC);
if (iclog->ic_state == XLOG_STATE_WANT_SYNC) {
/* update tail before writing to iclog */
xfs_lsn_t tail_lsn = xlog_assign_tail_lsn(log->l_mp);
sync++;
iclog->ic_state = XLOG_STATE_SYNCING;
iclog->ic_header.h_tail_lsn = cpu_to_be64(tail_lsn);
xlog_verify_tail_lsn(log, iclog, tail_lsn);
/* cycle incremented when incrementing curr_block */
}
spin_unlock(&log->l_icloglock);
/*
* We let the log lock go, so it's possible that we hit a log I/O
* error or some other SHUTDOWN condition that marks the iclog
* as XLOG_STATE_IOERROR before the bwrite. However, we know that
* this iclog has consistent data, so we ignore IOERROR
* flags after this point.
*/
if (sync)
return xlog_sync(log, iclog);
return 0;
} /* xlog_state_release_iclog */
/*
* This routine will mark the current iclog in the ring as WANT_SYNC
* and move the current iclog pointer to the next iclog in the ring.
* When this routine is called from xlog_state_get_iclog_space(), the
* exact size of the iclog has not yet been determined. All we know is
* that every data block. We have run out of space in this log record.
*/
STATIC void
xlog_state_switch_iclogs(
struct xlog *log,
struct xlog_in_core *iclog,
int eventual_size)
{
ASSERT(iclog->ic_state == XLOG_STATE_ACTIVE);
if (!eventual_size)
eventual_size = iclog->ic_offset;
iclog->ic_state = XLOG_STATE_WANT_SYNC;
iclog->ic_header.h_prev_block = cpu_to_be32(log->l_prev_block);
log->l_prev_block = log->l_curr_block;
log->l_prev_cycle = log->l_curr_cycle;
/* roll log?: ic_offset changed later */
log->l_curr_block += BTOBB(eventual_size)+BTOBB(log->l_iclog_hsize);
/* Round up to next log-sunit */
if (xfs_sb_version_haslogv2(&log->l_mp->m_sb) &&
log->l_mp->m_sb.sb_logsunit > 1) {
uint32_t sunit_bb = BTOBB(log->l_mp->m_sb.sb_logsunit);
log->l_curr_block = roundup(log->l_curr_block, sunit_bb);
}
if (log->l_curr_block >= log->l_logBBsize) {
/*
* Rewind the current block before the cycle is bumped to make
* sure that the combined LSN never transiently moves forward
* when the log wraps to the next cycle. This is to support the
* unlocked sample of these fields from xlog_valid_lsn(). Most
* other cases should acquire l_icloglock.
*/
log->l_curr_block -= log->l_logBBsize;
ASSERT(log->l_curr_block >= 0);
smp_wmb();
log->l_curr_cycle++;
if (log->l_curr_cycle == XLOG_HEADER_MAGIC_NUM)
log->l_curr_cycle++;
}
ASSERT(iclog == log->l_iclog);
log->l_iclog = iclog->ic_next;
} /* xlog_state_switch_iclogs */
/*
* Write out all data in the in-core log as of this exact moment in time.
*
* Data may be written to the in-core log during this call. However,
* we don't guarantee this data will be written out. A change from past
* implementation means this routine will *not* write out zero length LRs.
*
* Basically, we try and perform an intelligent scan of the in-core logs.
* If we determine there is no flushable data, we just return. There is no
* flushable data if:
*
* 1. the current iclog is active and has no data; the previous iclog
* is in the active or dirty state.
* 2. the current iclog is drity, and the previous iclog is in the
* active or dirty state.
*
* We may sleep if:
*
* 1. the current iclog is not in the active nor dirty state.
* 2. the current iclog dirty, and the previous iclog is not in the
* active nor dirty state.
* 3. the current iclog is active, and there is another thread writing
* to this particular iclog.
* 4. a) the current iclog is active and has no other writers
* b) when we return from flushing out this iclog, it is still
* not in the active nor dirty state.
*/
int
_xfs_log_force(
struct xfs_mount *mp,
uint flags,
int *log_flushed)
{
struct xlog *log = mp->m_log;
struct xlog_in_core *iclog;
xfs_lsn_t lsn;
XFS_STATS_INC(mp, xs_log_force);
xlog_cil_force(log);
spin_lock(&log->l_icloglock);
iclog = log->l_iclog;
if (iclog->ic_state & XLOG_STATE_IOERROR) {
spin_unlock(&log->l_icloglock);
return -EIO;
}
/* If the head iclog is not active nor dirty, we just attach
* ourselves to the head and go to sleep.
*/
if (iclog->ic_state == XLOG_STATE_ACTIVE ||
iclog->ic_state == XLOG_STATE_DIRTY) {
/*
* If the head is dirty or (active and empty), then
* we need to look at the previous iclog. If the previous
* iclog is active or dirty we are done. There is nothing
* to sync out. Otherwise, we attach ourselves to the
* previous iclog and go to sleep.
*/
if (iclog->ic_state == XLOG_STATE_DIRTY ||
(atomic_read(&iclog->ic_refcnt) == 0
&& iclog->ic_offset == 0)) {
iclog = iclog->ic_prev;
if (iclog->ic_state == XLOG_STATE_ACTIVE ||
iclog->ic_state == XLOG_STATE_DIRTY)
goto no_sleep;
else
goto maybe_sleep;
} else {
if (atomic_read(&iclog->ic_refcnt) == 0) {
/* We are the only one with access to this
* iclog. Flush it out now. There should
* be a roundoff of zero to show that someone
* has already taken care of the roundoff from
* the previous sync.
*/
atomic_inc(&iclog->ic_refcnt);
lsn = be64_to_cpu(iclog->ic_header.h_lsn);
xlog_state_switch_iclogs(log, iclog, 0);
spin_unlock(&log->l_icloglock);
if (xlog_state_release_iclog(log, iclog))
return -EIO;
if (log_flushed)
*log_flushed = 1;
spin_lock(&log->l_icloglock);
if (be64_to_cpu(iclog->ic_header.h_lsn) == lsn &&
iclog->ic_state != XLOG_STATE_DIRTY)
goto maybe_sleep;
else
goto no_sleep;
} else {
/* Someone else is writing to this iclog.
* Use its call to flush out the data. However,
* the other thread may not force out this LR,
* so we mark it WANT_SYNC.
*/
xlog_state_switch_iclogs(log, iclog, 0);
goto maybe_sleep;
}
}
}
/* By the time we come around again, the iclog could've been filled
* which would give it another lsn. If we have a new lsn, just
* return because the relevant data has been flushed.
*/
maybe_sleep:
if (flags & XFS_LOG_SYNC) {
/*
* We must check if we're shutting down here, before
* we wait, while we're holding the l_icloglock.
* Then we check again after waking up, in case our
* sleep was disturbed by a bad news.
*/
if (iclog->ic_state & XLOG_STATE_IOERROR) {
spin_unlock(&log->l_icloglock);
return -EIO;
}
XFS_STATS_INC(mp, xs_log_force_sleep);
xlog_wait(&iclog->ic_force_wait, &log->l_icloglock);
/*
* No need to grab the log lock here since we're
* only deciding whether or not to return EIO
* and the memory read should be atomic.
*/
if (iclog->ic_state & XLOG_STATE_IOERROR)
return -EIO;
} else {
no_sleep:
spin_unlock(&log->l_icloglock);
}
return 0;
}
/*
* Wrapper for _xfs_log_force(), to be used when caller doesn't care
* about errors or whether the log was flushed or not. This is the normal
* interface to use when trying to unpin items or move the log forward.
*/
void
xfs_log_force(
xfs_mount_t *mp,
uint flags)
{
trace_xfs_log_force(mp, 0, _RET_IP_);
_xfs_log_force(mp, flags, NULL);
}
/*
* Force the in-core log to disk for a specific LSN.
*
* Find in-core log with lsn.
* If it is in the DIRTY state, just return.
* If it is in the ACTIVE state, move the in-core log into the WANT_SYNC
* state and go to sleep or return.
* If it is in any other state, go to sleep or return.
*
* Synchronous forces are implemented with a signal variable. All callers
* to force a given lsn to disk will wait on a the sv attached to the
* specific in-core log. When given in-core log finally completes its
* write to disk, that thread will wake up all threads waiting on the
* sv.
*/
int
_xfs_log_force_lsn(
struct xfs_mount *mp,
xfs_lsn_t lsn,
uint flags,
int *log_flushed)
{
struct xlog *log = mp->m_log;
struct xlog_in_core *iclog;
int already_slept = 0;
ASSERT(lsn != 0);
XFS_STATS_INC(mp, xs_log_force);
lsn = xlog_cil_force_lsn(log, lsn);
if (lsn == NULLCOMMITLSN)
return 0;
try_again:
spin_lock(&log->l_icloglock);
iclog = log->l_iclog;
if (iclog->ic_state & XLOG_STATE_IOERROR) {
spin_unlock(&log->l_icloglock);
return -EIO;
}
do {
if (be64_to_cpu(iclog->ic_header.h_lsn) != lsn) {
iclog = iclog->ic_next;
continue;
}
if (iclog->ic_state == XLOG_STATE_DIRTY) {
spin_unlock(&log->l_icloglock);
return 0;
}
if (iclog->ic_state == XLOG_STATE_ACTIVE) {
/*
* We sleep here if we haven't already slept (e.g.
* this is the first time we've looked at the correct
* iclog buf) and the buffer before us is going to
* be sync'ed. The reason for this is that if we
* are doing sync transactions here, by waiting for
* the previous I/O to complete, we can allow a few
* more transactions into this iclog before we close
* it down.
*
* Otherwise, we mark the buffer WANT_SYNC, and bump
* up the refcnt so we can release the log (which
* drops the ref count). The state switch keeps new
* transaction commits from using this buffer. When
* the current commits finish writing into the buffer,
* the refcount will drop to zero and the buffer will
* go out then.
*/
if (!already_slept &&
(iclog->ic_prev->ic_state &
(XLOG_STATE_WANT_SYNC | XLOG_STATE_SYNCING))) {
ASSERT(!(iclog->ic_state & XLOG_STATE_IOERROR));
XFS_STATS_INC(mp, xs_log_force_sleep);
xlog_wait(&iclog->ic_prev->ic_write_wait,
&log->l_icloglock);
already_slept = 1;
goto try_again;
}
atomic_inc(&iclog->ic_refcnt);
xlog_state_switch_iclogs(log, iclog, 0);
spin_unlock(&log->l_icloglock);
if (xlog_state_release_iclog(log, iclog))
return -EIO;
if (log_flushed)
*log_flushed = 1;
spin_lock(&log->l_icloglock);
}
if ((flags & XFS_LOG_SYNC) && /* sleep */
!(iclog->ic_state &
(XLOG_STATE_ACTIVE | XLOG_STATE_DIRTY))) {
/*
* Don't wait on completion if we know that we've
* gotten a log write error.
*/
if (iclog->ic_state & XLOG_STATE_IOERROR) {
spin_unlock(&log->l_icloglock);
return -EIO;
}
XFS_STATS_INC(mp, xs_log_force_sleep);
xlog_wait(&iclog->ic_force_wait, &log->l_icloglock);
/*
* No need to grab the log lock here since we're
* only deciding whether or not to return EIO
* and the memory read should be atomic.
*/
if (iclog->ic_state & XLOG_STATE_IOERROR)
return -EIO;
} else { /* just return */
spin_unlock(&log->l_icloglock);
}
return 0;
} while (iclog != log->l_iclog);
spin_unlock(&log->l_icloglock);
return 0;
}
/*
* Wrapper for _xfs_log_force_lsn(), to be used when caller doesn't care
* about errors or whether the log was flushed or not. This is the normal
* interface to use when trying to unpin items or move the log forward.
*/
void
xfs_log_force_lsn(
xfs_mount_t *mp,
xfs_lsn_t lsn,
uint flags)
{
trace_xfs_log_force(mp, lsn, _RET_IP_);
_xfs_log_force_lsn(mp, lsn, flags, NULL);
}
/*
* Called when we want to mark the current iclog as being ready to sync to
* disk.
*/
STATIC void
xlog_state_want_sync(
struct xlog *log,
struct xlog_in_core *iclog)
{
assert_spin_locked(&log->l_icloglock);
if (iclog->ic_state == XLOG_STATE_ACTIVE) {
xlog_state_switch_iclogs(log, iclog, 0);
} else {
ASSERT(iclog->ic_state &
(XLOG_STATE_WANT_SYNC|XLOG_STATE_IOERROR));
}
}
/*****************************************************************************
*
* TICKET functions
*
*****************************************************************************
*/
/*
* Free a used ticket when its refcount falls to zero.
*/
void
xfs_log_ticket_put(
xlog_ticket_t *ticket)
{
ASSERT(atomic_read(&ticket->t_ref) > 0);
if (atomic_dec_and_test(&ticket->t_ref))
kmem_zone_free(xfs_log_ticket_zone, ticket);
}
xlog_ticket_t *
xfs_log_ticket_get(
xlog_ticket_t *ticket)
{
ASSERT(atomic_read(&ticket->t_ref) > 0);
atomic_inc(&ticket->t_ref);
return ticket;
}
/*
* Figure out the total log space unit (in bytes) that would be
* required for a log ticket.
*/
int
xfs_log_calc_unit_res(
struct xfs_mount *mp,
int unit_bytes)
{
struct xlog *log = mp->m_log;
int iclog_space;
uint num_headers;
/*
* Permanent reservations have up to 'cnt'-1 active log operations
* in the log. A unit in this case is the amount of space for one
* of these log operations. Normal reservations have a cnt of 1
* and their unit amount is the total amount of space required.
*
* The following lines of code account for non-transaction data
* which occupy space in the on-disk log.
*
* Normal form of a transaction is:
* <oph><trans-hdr><start-oph><reg1-oph><reg1><reg2-oph>...<commit-oph>
* and then there are LR hdrs, split-recs and roundoff at end of syncs.
*
* We need to account for all the leadup data and trailer data
* around the transaction data.
* And then we need to account for the worst case in terms of using
* more space.
* The worst case will happen if:
* - the placement of the transaction happens to be such that the
* roundoff is at its maximum
* - the transaction data is synced before the commit record is synced
* i.e. <transaction-data><roundoff> | <commit-rec><roundoff>
* Therefore the commit record is in its own Log Record.
* This can happen as the commit record is called with its
* own region to xlog_write().
* This then means that in the worst case, roundoff can happen for
* the commit-rec as well.
* The commit-rec is smaller than padding in this scenario and so it is
* not added separately.
*/
/* for trans header */
unit_bytes += sizeof(xlog_op_header_t);
unit_bytes += sizeof(xfs_trans_header_t);
/* for start-rec */
unit_bytes += sizeof(xlog_op_header_t);
/*
* for LR headers - the space for data in an iclog is the size minus
* the space used for the headers. If we use the iclog size, then we
* undercalculate the number of headers required.
*
* Furthermore - the addition of op headers for split-recs might
* increase the space required enough to require more log and op
* headers, so take that into account too.
*
* IMPORTANT: This reservation makes the assumption that if this
* transaction is the first in an iclog and hence has the LR headers
* accounted to it, then the remaining space in the iclog is
* exclusively for this transaction. i.e. if the transaction is larger
* than the iclog, it will be the only thing in that iclog.
* Fundamentally, this means we must pass the entire log vector to
* xlog_write to guarantee this.
*/
iclog_space = log->l_iclog_size - log->l_iclog_hsize;
num_headers = howmany(unit_bytes, iclog_space);
/* for split-recs - ophdrs added when data split over LRs */
unit_bytes += sizeof(xlog_op_header_t) * num_headers;
/* add extra header reservations if we overrun */
while (!num_headers ||
howmany(unit_bytes, iclog_space) > num_headers) {
unit_bytes += sizeof(xlog_op_header_t);
num_headers++;
}
unit_bytes += log->l_iclog_hsize * num_headers;
/* for commit-rec LR header - note: padding will subsume the ophdr */
unit_bytes += log->l_iclog_hsize;
/* for roundoff padding for transaction data and one for commit record */
if (xfs_sb_version_haslogv2(&mp->m_sb) && mp->m_sb.sb_logsunit > 1) {
/* log su roundoff */
unit_bytes += 2 * mp->m_sb.sb_logsunit;
} else {
/* BB roundoff */
unit_bytes += 2 * BBSIZE;
}
return unit_bytes;
}
/*
* Allocate and initialise a new log ticket.
*/
struct xlog_ticket *
xlog_ticket_alloc(
struct xlog *log,
int unit_bytes,
int cnt,
char client,
bool permanent,
xfs_km_flags_t alloc_flags)
{
struct xlog_ticket *tic;
int unit_res;
tic = kmem_zone_zalloc(xfs_log_ticket_zone, alloc_flags);
if (!tic)
return NULL;
unit_res = xfs_log_calc_unit_res(log->l_mp, unit_bytes);
atomic_set(&tic->t_ref, 1);
tic->t_task = current;
INIT_LIST_HEAD(&tic->t_queue);
tic->t_unit_res = unit_res;
tic->t_curr_res = unit_res;
tic->t_cnt = cnt;
tic->t_ocnt = cnt;
tic->t_tid = prandom_u32();
tic->t_clientid = client;
tic->t_flags = XLOG_TIC_INITED;
if (permanent)
tic->t_flags |= XLOG_TIC_PERM_RESERV;
xlog_tic_reset_res(tic);
return tic;
}
/******************************************************************************
*
* Log debug routines
*
******************************************************************************
*/
#if defined(DEBUG)
/*
* Make sure that the destination ptr is within the valid data region of
* one of the iclogs. This uses backup pointers stored in a different
* part of the log in case we trash the log structure.
*/
STATIC void
xlog_verify_dest_ptr(
struct xlog *log,
void *ptr)
{
int i;
int good_ptr = 0;
for (i = 0; i < log->l_iclog_bufs; i++) {
if (ptr >= log->l_iclog_bak[i] &&
ptr <= log->l_iclog_bak[i] + log->l_iclog_size)
good_ptr++;
}
if (!good_ptr)
xfs_emerg(log->l_mp, "%s: invalid ptr", __func__);
}
/*
* Check to make sure the grant write head didn't just over lap the tail. If
* the cycles are the same, we can't be overlapping. Otherwise, make sure that
* the cycles differ by exactly one and check the byte count.
*
* This check is run unlocked, so can give false positives. Rather than assert
* on failures, use a warn-once flag and a panic tag to allow the admin to
* determine if they want to panic the machine when such an error occurs. For
* debug kernels this will have the same effect as using an assert but, unlinke
* an assert, it can be turned off at runtime.
*/
STATIC void
xlog_verify_grant_tail(
struct xlog *log)
{
int tail_cycle, tail_blocks;
int cycle, space;
xlog_crack_grant_head(&log->l_write_head.grant, &cycle, &space);
xlog_crack_atomic_lsn(&log->l_tail_lsn, &tail_cycle, &tail_blocks);
if (tail_cycle != cycle) {
if (cycle - 1 != tail_cycle &&
!(log->l_flags & XLOG_TAIL_WARN)) {
xfs_alert_tag(log->l_mp, XFS_PTAG_LOGRES,
"%s: cycle - 1 != tail_cycle", __func__);
log->l_flags |= XLOG_TAIL_WARN;
}
if (space > BBTOB(tail_blocks) &&
!(log->l_flags & XLOG_TAIL_WARN)) {
xfs_alert_tag(log->l_mp, XFS_PTAG_LOGRES,
"%s: space > BBTOB(tail_blocks)", __func__);
log->l_flags |= XLOG_TAIL_WARN;
}
}
}
/* check if it will fit */
STATIC void
xlog_verify_tail_lsn(
struct xlog *log,
struct xlog_in_core *iclog,
xfs_lsn_t tail_lsn)
{
int blocks;
if (CYCLE_LSN(tail_lsn) == log->l_prev_cycle) {
blocks =
log->l_logBBsize - (log->l_prev_block - BLOCK_LSN(tail_lsn));
if (blocks < BTOBB(iclog->ic_offset)+BTOBB(log->l_iclog_hsize))
xfs_emerg(log->l_mp, "%s: ran out of log space", __func__);
} else {
ASSERT(CYCLE_LSN(tail_lsn)+1 == log->l_prev_cycle);
if (BLOCK_LSN(tail_lsn) == log->l_prev_block)
xfs_emerg(log->l_mp, "%s: tail wrapped", __func__);
blocks = BLOCK_LSN(tail_lsn) - log->l_prev_block;
if (blocks < BTOBB(iclog->ic_offset) + 1)
xfs_emerg(log->l_mp, "%s: ran out of log space", __func__);
}
} /* xlog_verify_tail_lsn */
/*
* Perform a number of checks on the iclog before writing to disk.
*
* 1. Make sure the iclogs are still circular
* 2. Make sure we have a good magic number
* 3. Make sure we don't have magic numbers in the data
* 4. Check fields of each log operation header for:
* A. Valid client identifier
* B. tid ptr value falls in valid ptr space (user space code)
* C. Length in log record header is correct according to the
* individual operation headers within record.
* 5. When a bwrite will occur within 5 blocks of the front of the physical
* log, check the preceding blocks of the physical log to make sure all
* the cycle numbers agree with the current cycle number.
*/
STATIC void
xlog_verify_iclog(
struct xlog *log,
struct xlog_in_core *iclog,
int count,
bool syncing)
{
xlog_op_header_t *ophead;
xlog_in_core_t *icptr;
xlog_in_core_2_t *xhdr;
void *base_ptr, *ptr, *p;
ptrdiff_t field_offset;
uint8_t clientid;
int len, i, j, k, op_len;
int idx;
/* check validity of iclog pointers */
spin_lock(&log->l_icloglock);
icptr = log->l_iclog;
for (i = 0; i < log->l_iclog_bufs; i++, icptr = icptr->ic_next)
ASSERT(icptr);
if (icptr != log->l_iclog)
xfs_emerg(log->l_mp, "%s: corrupt iclog ring", __func__);
spin_unlock(&log->l_icloglock);
/* check log magic numbers */
if (iclog->ic_header.h_magicno != cpu_to_be32(XLOG_HEADER_MAGIC_NUM))
xfs_emerg(log->l_mp, "%s: invalid magic num", __func__);
base_ptr = ptr = &iclog->ic_header;
p = &iclog->ic_header;
for (ptr += BBSIZE; ptr < base_ptr + count; ptr += BBSIZE) {
if (*(__be32 *)ptr == cpu_to_be32(XLOG_HEADER_MAGIC_NUM))
xfs_emerg(log->l_mp, "%s: unexpected magic num",
__func__);
}
/* check fields */
len = be32_to_cpu(iclog->ic_header.h_num_logops);
base_ptr = ptr = iclog->ic_datap;
ophead = ptr;
xhdr = iclog->ic_data;
for (i = 0; i < len; i++) {
ophead = ptr;
/* clientid is only 1 byte */
p = &ophead->oh_clientid;
field_offset = p - base_ptr;
if (!syncing || (field_offset & 0x1ff)) {
clientid = ophead->oh_clientid;
} else {
idx = BTOBBT((char *)&ophead->oh_clientid - iclog->ic_datap);
if (idx >= (XLOG_HEADER_CYCLE_SIZE / BBSIZE)) {
j = idx / (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
k = idx % (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
clientid = xlog_get_client_id(
xhdr[j].hic_xheader.xh_cycle_data[k]);
} else {
clientid = xlog_get_client_id(
iclog->ic_header.h_cycle_data[idx]);
}
}
if (clientid != XFS_TRANSACTION && clientid != XFS_LOG)
xfs_warn(log->l_mp,
"%s: invalid clientid %d op "PTR_FMT" offset 0x%lx",
__func__, clientid, ophead,
(unsigned long)field_offset);
/* check length */
p = &ophead->oh_len;
field_offset = p - base_ptr;
if (!syncing || (field_offset & 0x1ff)) {
op_len = be32_to_cpu(ophead->oh_len);
} else {
idx = BTOBBT((uintptr_t)&ophead->oh_len -
(uintptr_t)iclog->ic_datap);
if (idx >= (XLOG_HEADER_CYCLE_SIZE / BBSIZE)) {
j = idx / (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
k = idx % (XLOG_HEADER_CYCLE_SIZE / BBSIZE);
op_len = be32_to_cpu(xhdr[j].hic_xheader.xh_cycle_data[k]);
} else {
op_len = be32_to_cpu(iclog->ic_header.h_cycle_data[idx]);
}
}
ptr += sizeof(xlog_op_header_t) + op_len;
}
} /* xlog_verify_iclog */
#endif
/*
* Mark all iclogs IOERROR. l_icloglock is held by the caller.
*/
STATIC int
xlog_state_ioerror(
struct xlog *log)
{
xlog_in_core_t *iclog, *ic;
iclog = log->l_iclog;
if (! (iclog->ic_state & XLOG_STATE_IOERROR)) {
/*
* Mark all the incore logs IOERROR.
* From now on, no log flushes will result.
*/
ic = iclog;
do {
ic->ic_state = XLOG_STATE_IOERROR;
ic = ic->ic_next;
} while (ic != iclog);
return 0;
}
/*
* Return non-zero, if state transition has already happened.
*/
return 1;
}
/*
* This is called from xfs_force_shutdown, when we're forcibly
* shutting down the filesystem, typically because of an IO error.
* Our main objectives here are to make sure that:
* a. if !logerror, flush the logs to disk. Anything modified
* after this is ignored.
* b. the filesystem gets marked 'SHUTDOWN' for all interested
* parties to find out, 'atomically'.
* c. those who're sleeping on log reservations, pinned objects and
* other resources get woken up, and be told the bad news.
* d. nothing new gets queued up after (b) and (c) are done.
*
* Note: for the !logerror case we need to flush the regions held in memory out
* to disk first. This needs to be done before the log is marked as shutdown,
* otherwise the iclog writes will fail.
*/
int
xfs_log_force_umount(
struct xfs_mount *mp,
int logerror)
{
struct xlog *log;
int retval;
log = mp->m_log;
/*
* If this happens during log recovery, don't worry about
* locking; the log isn't open for business yet.
*/
if (!log ||
log->l_flags & XLOG_ACTIVE_RECOVERY) {
mp->m_flags |= XFS_MOUNT_FS_SHUTDOWN;
if (mp->m_sb_bp)
mp->m_sb_bp->b_flags |= XBF_DONE;
return 0;
}
/*
* Somebody could've already done the hard work for us.
* No need to get locks for this.
*/
if (logerror && log->l_iclog->ic_state & XLOG_STATE_IOERROR) {
ASSERT(XLOG_FORCED_SHUTDOWN(log));
return 1;
}
/*
* Flush all the completed transactions to disk before marking the log
* being shut down. We need to do it in this order to ensure that
* completed operations are safely on disk before we shut down, and that
* we don't have to issue any buffer IO after the shutdown flags are set
* to guarantee this.
*/
if (!logerror)
_xfs_log_force(mp, XFS_LOG_SYNC, NULL);
/*
* mark the filesystem and the as in a shutdown state and wake
* everybody up to tell them the bad news.
*/
spin_lock(&log->l_icloglock);
mp->m_flags |= XFS_MOUNT_FS_SHUTDOWN;
if (mp->m_sb_bp)
mp->m_sb_bp->b_flags |= XBF_DONE;
/*
* Mark the log and the iclogs with IO error flags to prevent any
* further log IO from being issued or completed.
*/
log->l_flags |= XLOG_IO_ERROR;
retval = xlog_state_ioerror(log);
spin_unlock(&log->l_icloglock);
/*
* We don't want anybody waiting for log reservations after this. That
* means we have to wake up everybody queued up on reserveq as well as
* writeq. In addition, we make sure in xlog_{re}grant_log_space that
* we don't enqueue anything once the SHUTDOWN flag is set, and this
* action is protected by the grant locks.
*/
xlog_grant_head_wake_all(&log->l_reserve_head);
xlog_grant_head_wake_all(&log->l_write_head);
/*
* Wake up everybody waiting on xfs_log_force. Wake the CIL push first
* as if the log writes were completed. The abort handling in the log
* item committed callback functions will do this again under lock to
* avoid races.
*/
wake_up_all(&log->l_cilp->xc_commit_wait);
xlog_state_do_callback(log, XFS_LI_ABORTED, NULL);
#ifdef XFSERRORDEBUG
{
xlog_in_core_t *iclog;
spin_lock(&log->l_icloglock);
iclog = log->l_iclog;
do {
ASSERT(iclog->ic_callback == 0);
iclog = iclog->ic_next;
} while (iclog != log->l_iclog);
spin_unlock(&log->l_icloglock);
}
#endif
/* return non-zero if log IOERROR transition had already happened */
return retval;
}
STATIC int
xlog_iclogs_empty(
struct xlog *log)
{
xlog_in_core_t *iclog;
iclog = log->l_iclog;
do {
/* endianness does not matter here, zero is zero in
* any language.
*/
if (iclog->ic_header.h_num_logops)
return 0;
iclog = iclog->ic_next;
} while (iclog != log->l_iclog);
return 1;
}
/*
* Verify that an LSN stamped into a piece of metadata is valid. This is
* intended for use in read verifiers on v5 superblocks.
*/
bool
xfs_log_check_lsn(
struct xfs_mount *mp,
xfs_lsn_t lsn)
{
struct xlog *log = mp->m_log;
bool valid;
/*
* norecovery mode skips mount-time log processing and unconditionally
* resets the in-core LSN. We can't validate in this mode, but
* modifications are not allowed anyways so just return true.
*/
if (mp->m_flags & XFS_MOUNT_NORECOVERY)
return true;
/*
* Some metadata LSNs are initialized to NULL (e.g., the agfl). This is
* handled by recovery and thus safe to ignore here.
*/
if (lsn == NULLCOMMITLSN)
return true;
valid = xlog_valid_lsn(mp->m_log, lsn);
/* warn the user about what's gone wrong before verifier failure */
if (!valid) {
spin_lock(&log->l_icloglock);
xfs_warn(mp,
"Corruption warning: Metadata has LSN (%d:%d) ahead of current LSN (%d:%d). "
"Please unmount and run xfs_repair (>= v4.3) to resolve.",
CYCLE_LSN(lsn), BLOCK_LSN(lsn),
log->l_curr_cycle, log->l_curr_block);
spin_unlock(&log->l_icloglock);
}
return valid;
}
View Git Blame Copy Permalink