| .. |
|
include/mach
|
ARM: drop <mach/timex.h> for !ARCH_MULTIPLATFORM, too
|
2013-12-20 17:17:16 +01:00 |
|
am33xx-restart.c
|
ARM: OMAP2+: am33xx-restart: trigger warm reset on omap2+ boards
|
2013-08-21 01:01:30 -07:00 |
|
am33xx.h
|
ARM: OMAP2+: AM43x: early init
|
2013-06-12 08:00:35 -07:00 |
|
am35xx-emac.c
|
ARM: 7989/1: Delete asm/system.h
|
2014-02-25 11:33:37 +00:00 |
|
am35xx-emac.h
|
|
|
|
am35xx.h
|
ARM: OMAP2+: Make am35xx.h local
|
2012-09-20 15:02:23 -07:00 |
|
board-3430sdp.c
|
ARM: OMAP: 3430SDP: use new display drivers
|
2013-08-28 10:23:21 +03:00 |
|
board-am3517crane.c
|
ARM: OMAP2: remove useless variable 'ret'
|
2013-08-22 00:15:17 -07:00 |
|
board-am3517evm.c
|
ARM: SoC cleanups for 3.12
|
2013-09-06 13:21:16 -07:00 |
|
board-cm-t35.c
|
[media] ARM: omap2: cm-t35: Add regulators and clock for camera sensor
|
2014-02-24 13:10:14 -03:00 |
|
board-cm-t3517.c
|
Clean-up for omap2+ timers from Jon Hunter <jon-hunter@ti.com>:
|
2013-04-08 19:30:48 +02:00 |
|
board-devkit8000.c
|
ARM: OMAP: devkit8000: use new display drivers
|
2013-08-28 10:23:20 +03:00 |
|
board-flash.c
|
mtd: nand: omap: combine different flavours of 1-bit hamming ecc schemes
|
2013-11-06 23:33:07 -08:00 |
|
board-flash.h
|
ARM: OMAP2+: gpmc: localize gpmc header
|
2012-10-15 14:42:15 +05:30 |
|
board-generic.c
|
fbdev changes for 3.15 (OMAP)
|
2014-04-07 10:47:51 -07:00 |
|
board-ldp.c
|
ARM: OMAP2+: Fix LCD panel backlight regression for LDP legacy booting
|
2013-12-27 09:33:27 -08:00 |
|
board-n8x0.c
|
ARM: OMAP2+: dts: add n8x0 onenand
|
2013-11-25 15:38:09 -08:00 |
|
board-omap3beagle.c
|
ARM: SoC fixes for 3.13 merge window
|
2013-11-16 12:45:55 -08:00 |
|
board-omap3logic.c
|
arm-soc: cleanups
|
2013-02-21 14:58:40 -08:00 |
|
board-omap3pandora.c
|
wl1251: move power GPIO handling into the driver
|
2014-02-28 14:08:26 -05:00 |
|
board-omap3stalker.c
|
misc: (at24) move header to linux/platform_data/
|
2013-09-30 06:02:34 +02:00 |
|
board-omap3touchbook.c
|
ARM: OMAP3: omap3touchbook: Adapt to ehci-omap changes
|
2013-04-02 10:00:01 -07:00 |
|
board-overo.c
|
ARM: OMAP: overo: use new display drivers
|
2013-08-28 10:23:19 +03:00 |
|
board-rx51-peripherals.c
|
wl1251: move power GPIO handling into the driver
|
2014-02-28 14:08:26 -05:00 |
|
board-rx51-video.c
|
ARM: OMAP2+: N900: remove omapdss init for DT boot
|
2014-04-18 16:37:43 -07:00 |
|
board-rx51.c
|
ARM: OMAP3: RX-51: ARM errata 430973 workaround
|
2013-10-08 11:57:04 -07:00 |
|
board-rx51.h
|
ARM: OMAP2+: Make board-rx51.h local
|
2012-09-20 15:02:27 -07:00 |
|
board-ti8168evm.c
|
ARM: delete struct sys_timer
|
2012-12-24 09:36:38 -07:00 |
|
cclock3xxx_data.c
|
== Changes to existing drivers ==
|
2014-04-07 10:24:18 -07:00 |
|
cclock2420_data.c
|
ARM: OMAP2+: clock data: Remove CK_* flags
|
2013-03-18 09:57:39 -06:00 |
|
cclock2430_data.c
|
ARM: OMAP2xxx: hwmod: Convert AES crypto devcie data to hwmod
|
2013-03-30 15:51:33 -06:00 |
|
clkt2xxx_apll.c
|
ARM: OMAP2: CM/PM: remove direct register accesses outside CM code
|
2013-10-19 10:11:51 -06:00 |
|
clkt2xxx_dpll.c
|
ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts
|
2012-11-12 19:18:51 -07:00 |
|
clkt2xxx_dpllcore.c
|
ARM: OMAP2: CM/PM: remove direct register accesses outside CM code
|
2013-10-19 10:11:51 -06:00 |
|
clkt2xxx_osc.c
|
ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts
|
2012-11-12 19:18:51 -07:00 |
|
clkt2xxx_sys.c
|
ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts
|
2012-11-12 19:18:51 -07:00 |
|
clkt2xxx_virt_prcm_set.c
|
ARM: OMAP2: CM/PM: remove direct register accesses outside CM code
|
2013-10-19 10:11:51 -06:00 |
|
clkt34xx_dpll3m2.c
|
omap prcm changes via Paul Walmsley <paul@pwsan.com>:
|
2012-11-30 08:40:31 -08:00 |
|
clkt_clksel.c
|
ARM: OMAP2+: clock: use driver API instead of direct memory read/write
|
2014-01-17 12:37:00 -08:00 |
|
clkt_dpll.c
|
ARM: OMAP2+: clock: fix rate prints
|
2014-02-28 12:43:46 -07:00 |
|
clkt_iclk.c
|
ARM: OMAP2+: clock: use driver API instead of direct memory read/write
|
2014-01-17 12:37:00 -08:00 |
|
clock2xxx.c
|
ARM: OMAP2+: Use omap initcalls
|
2013-01-11 11:24:18 -08:00 |
|
clock2xxx.h
|
ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts
|
2012-11-12 19:18:51 -07:00 |
|
clock3xxx.c
|
ARM: OMAP2+: Use omap initcalls
|
2013-01-11 11:24:18 -08:00 |
|
clock3xxx.h
|
CLK: TI: add omap3 clock init file
|
2014-01-17 12:35:48 -08:00 |
|
clock34xx.c
|
ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts
|
2012-11-12 19:18:50 -07:00 |
|
clock34xx.h
|
|
|
|
clock36xx.c
|
ARM: OMAP2+: clock: use driver API instead of direct memory read/write
|
2014-01-17 12:37:00 -08:00 |
|
clock36xx.h
|
ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts
|
2012-11-12 19:18:50 -07:00 |
|
clock44xx.h
|
|
|
|
clock2430.c
|
ARM: OMAP2: clock: Cleanup !CONFIG_COMMON_CLK parts
|
2012-11-12 19:18:51 -07:00 |
|
clock3517.c
|
ARM: OMAP3: clock: Cleanup !CONFIG_COMMON_CLK parts
|
2012-11-12 19:18:50 -07:00 |
|
clock3517.h
|
|
|
|
clock_common_data.c
|
ARM: OMAP2+: clock: Cleanup !CONFIG_COMMON_CLK parts
|
2012-11-12 19:18:51 -07:00 |
|
clock.c
|
ARM: OMAP2+: clock: use driver API instead of direct memory read/write
|
2014-01-17 12:37:00 -08:00 |
|
clock.h
|
ARM: OMAP2+: clock: add support for indexed memmaps
|
2014-01-17 12:36:57 -08:00 |
|
clockdomain.c
|
ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints
|
2013-01-29 14:59:58 -07:00 |
|
clockdomain.h
|
ARM: OMAP2+: CM: AM43x clockdomain data
|
2013-10-13 22:48:36 -06:00 |
|
clockdomains2xxx_3xxx_data.c
|
ARM: OMAP2+: hwmod code/clockdomain data: fix 32K sync timer
|
2012-07-05 17:25:38 -07:00 |
|
clockdomains3xxx_data.c
|
ARM: OMAP3: fix iva mmu programming issues
|
2014-03-12 09:48:26 -07:00 |
|
clockdomains7xx_data.c
|
ARM: OMAP: DRA7: clockdomain: Add DRA7XX data and update header
|
2013-08-23 04:28:36 -06:00 |
|
clockdomains33xx_data.c
|
ARM: OMAP AM33xx: clockdomains: Add clockdomain data and respective operations
|
2012-06-18 12:08:06 -06:00 |
|
clockdomains43xx_data.c
|
ARM: OMAP2+: CM: AM43x clockdomain data
|
2013-10-13 22:48:36 -06:00 |
|
clockdomains44xx_data.c
|
ARM: OMAP2+: clockdomain: Fix OMAP4 ISS clk domain to support only SWSUP
|
2012-10-29 22:02:13 -06:00 |
|
clockdomains54xx_data.c
|
ARM: OMAP5: clockdomain data: Add OMAP54XX data and update the header
|
2013-06-08 11:56:15 -06:00 |
|
clockdomains2420_data.c
|
ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2
|
2012-10-18 16:23:46 -07:00 |
|
clockdomains2430_data.c
|
ARM: OMAP: Split plat/cpu.h into local soc.h for mach-omap1 and mach-omap2
|
2012-10-18 16:23:46 -07:00 |
|
cm1_7xx.h
|
ARM: OMAP: DRA7: CM: Add DRA7XX register defines
|
2013-08-23 04:24:15 -06:00 |
|
cm1_44xx.h
|
ARM: OMAP4+: CM: Move function prototypes to common header for re-use
|
2013-06-08 11:41:39 -06:00 |
|
cm1_54xx.h
|
ARM: OMAP5: CM: Add OMAP54XX register and bitfield files
|
2013-06-08 11:46:09 -06:00 |
|
cm2_7xx.h
|
ARM: OMAP: DRA7: CM: Add DRA7XX register defines
|
2013-08-23 04:24:15 -06:00 |
|
cm2_44xx.h
|
ARM: OMAP4+: CM: Move function prototypes to common header for re-use
|
2013-06-08 11:41:39 -06:00 |
|
cm2_54xx.h
|
ARM: OMAP5: CM: Add OMAP54XX register and bitfield files
|
2013-06-08 11:46:09 -06:00 |
|
cm2xxx_3xxx.h
|
ARM: OMAP3: clock: Add 3xxx data using common struct clk
|
2012-11-12 19:18:49 -07:00 |
|
cm2xxx.c
|
ARM: OMAP2: CM/PM: remove direct register accesses outside CM code
|
2013-10-19 10:11:51 -06:00 |
|
cm2xxx.h
|
ARM: OMAP2: CM/PM: remove direct register accesses outside CM code
|
2013-10-19 10:11:51 -06:00 |
|
cm3xxx.c
|
ARM: OMAP3: CM/control: move CM scratchpad save to CM driver
|
2013-10-19 10:11:52 -06:00 |
|
cm3xxx.h
|
ARM: OMAP3: CM/control: move CM scratchpad save to CM driver
|
2013-10-19 10:11:52 -06:00 |
|
cm33xx.c
|
ARM: OMAP2+: CM: cm_inst offset s16->u16
|
2013-10-13 22:46:38 -06:00 |
|
cm33xx.h
|
ARM: OMAP2+: AM43x: PRCM kbuild
|
2013-10-13 22:49:06 -06:00 |
|
cm44xx.c
|
|
|
|
cm44xx.h
|
|
|
|
cm_44xx_54xx.h
|
ARM: OMAP4+: CM: Move function prototypes to common header for re-use
|
2013-06-08 11:41:39 -06:00 |
|
cm_common.c
|
ARM: OMAP2: Fix compillation error in cm_common
|
2012-11-12 13:42:46 -08:00 |
|
cm-regbits-7xx.h
|
ARM: OMAP: DRA7: CM: Add minimal regbit shifts
|
2013-08-23 04:28:36 -06:00 |
|
cm-regbits-24xx.h
|
ARM: OMAP2: PRM/CM: Cleanup unused header
|
2013-07-21 21:13:59 -06:00 |
|
cm-regbits-33xx.h
|
ARM: OMAP3: PRM/CM: Cleanup unused header
|
2013-07-21 22:10:03 -06:00 |
|
cm-regbits-34xx.h
|
ARM: OMAP3: PRM/CM: Cleanup unused header
|
2013-07-21 22:10:03 -06:00 |
|
cm-regbits-44xx.h
|
ARM: OMAP4: PRM/CM: Cleanup unused header
|
2013-07-21 22:10:14 -06:00 |
|
cm-regbits-54xx.h
|
ARM: OMAP5: PRM/CM: Cleanup unused header
|
2013-07-21 22:10:25 -06:00 |
|
cm.h
|
ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup
|
2012-11-08 15:09:26 -07:00 |
|
cminst44xx.c
|
ARM: OMAP2+: clockdomain: Reintroduce SW_SLEEP Support
|
2014-02-28 12:43:46 -07:00 |
|
cminst44xx.h
|
ARM: OMAP2+: CM: cm_inst offset s16->u16
|
2013-10-13 22:46:38 -06:00 |
|
common-board-devices.c
|
ARM: arm-soc: Header cleanups
|
2012-12-12 11:45:16 -08:00 |
|
common-board-devices.h
|
ARM: OMAP2+: Add quirks support for n8x0
|
2013-11-25 15:31:17 -08:00 |
|
common.c
|
ARM: OMAP2+: common: remove use of vram
|
2012-12-16 11:19:48 -08:00 |
|
common.h
|
ARM: OMAP2+: DT 'compatible' tweak for displays
|
2014-03-19 11:02:46 +02:00 |
|
control.c
|
ARM: OMAP3: control: add API for setting IVA bootmode
|
2013-10-19 10:11:52 -06:00 |
|
control.h
|
ARM: OMAP3: control: add API for setting IVA bootmode
|
2013-10-19 10:11:52 -06:00 |
|
cpuidle34xx.c
|
ARM: arm-soc cleanup for 3.10
|
2013-05-02 09:03:55 -07:00 |
|
cpuidle44xx.c
|
ARM: OMAP: Kill warning in CPUIDLE code with !CONFIG_SMP
|
2014-02-21 15:16:56 -08:00 |
|
ctrl_module_core_44xx.h
|
ARM: OMAP2+: Make ctrl_module_core_44xx.h local
|
2012-09-20 15:02:29 -07:00 |
|
ctrl_module_pad_core_44xx.h
|
ARM: OMAP2+: Make ctrl_module_pad_core_44xx.h local
|
2012-09-20 15:02:30 -07:00 |
|
ctrl_module_pad_wkup_44xx.h
|
ARM: OMAP2+: Make ctrl_module_pad_wkup_44xx.h local
|
2012-09-20 15:02:32 -07:00 |
|
ctrl_module_wkup_44xx.h
|
ARM: OMAP2+: Make ctrl_module_wkup_44xx.h local
|
2012-09-20 15:02:33 -07:00 |
|
devices.c
|
ARM: OMAP2+: change the ISP device archdata MMU name for DT
|
2014-03-12 09:49:03 -07:00 |
|
devices.h
|
|
|
|
display.c
|
Merge branch '3.15/dss-dt' into 3.15/fbdev
|
2014-03-20 08:13:50 +02:00 |
|
display.h
|
ARM: OMAP2+: add omapdss_init_of()
|
2014-03-19 10:52:23 +02:00 |
|
dma.c
|
dmaengine: omap-dma: move register read/writes into omap-dma.c
|
2014-04-04 00:31:49 +01:00 |
|
dpll3xxx.c
|
ARM: SoC specific changes
|
2014-04-05 14:19:54 -07:00 |
|
dpll44xx.c
|
ARM: OMAP2+: clock: use driver API instead of direct memory read/write
|
2014-01-17 12:37:00 -08:00 |
|
drm.c
|
ARM: OMAP2+: display: Create omapdrm device inside omap_display_init
|
2013-10-08 14:02:35 -07:00 |
|
dsp.c
|
ARM: OMAP2+: fix typo "CONFIG_BRIDGE_DVFS"
|
2013-04-01 08:52:50 -07:00 |
|
dss-common.c
|
ARM: OMAP2+: remove pdata quirks for displays
|
2014-04-04 09:55:18 +03:00 |
|
dss-common.h
|
ARM: OMAP2+: pdata-quirks: add legacy display init for IGEPv2 board
|
2013-10-09 07:54:34 -07:00 |
|
emu.c
|
ARM: OMAP2+: Use omap initcalls
|
2013-01-11 11:24:18 -08:00 |
|
fb.c
|
ARM: OMAP2+: display: Create omapvrfb and omapfb devices inside omap_display_init
|
2013-10-08 14:02:51 -07:00 |
|
gpio.c
|
arm-soc: soc-specific updates
|
2013-02-21 15:27:22 -08:00 |
|
gpmc-nand.c
|
ARM: OMAP2+: gpmc: update gpmc_hwecc_bch_capable() for new platforms and ECC schemes
|
2014-03-02 10:15:52 -08:00 |
|
gpmc-nand.h
|
ARM: OMAP2+: gpmc: localize gpmc header
|
2012-10-15 14:42:15 +05:30 |
|
gpmc-onenand.c
|
ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT
|
2013-10-03 10:59:50 -07:00 |
|
gpmc-onenand.h
|
ARM: OMAP2+: onenand: header cleanup
|
2012-10-15 14:42:03 +05:30 |
|
gpmc-smc91x.c
|
ARM: OMAP2+: Convert SMC91x to use gpmc_cs_program_settings()
|
2013-04-01 14:53:43 -05:00 |
|
gpmc-smc91x.h
|
ARM: OMAP2+: Make gpmc-smc91x.h local
|
2012-09-20 15:02:49 -07:00 |
|
gpmc-smsc911x.c
|
ARM: OMAP2+: smsc911x: fix return value check in gpmc_smsc911x_init()
|
2013-11-14 10:40:36 -08:00 |
|
gpmc-smsc911x.h
|
ARM: OMAP2+: Make gpmc-smsc911x.h local
|
2012-09-20 15:03:55 -07:00 |
|
gpmc.c
|
ARM: OMAP2+: gpmc: fix: DT ONENAND child nodes not probed when MTD_ONENAND is built as module
|
2014-02-13 15:10:54 -08:00 |
|
gpmc.h
|
ARM: OMAP2+: Add function to read GPMC settings from device-tree
|
2013-04-01 14:53:45 -05:00 |
|
hdq1w.c
|
arm-soc: soc-specific updates
|
2013-02-21 15:27:22 -08:00 |
|
hdq1w.h
|
ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2
|
2012-10-18 16:05:55 -07:00 |
|
hsmmc.c
|
ARM: OMAP2+: Remove omap4 pdata from hsmmc.c
|
2013-05-30 13:09:31 -07:00 |
|
hsmmc.h
|
|
|
|
hwspinlock.c
|
arm-soc: soc-specific updates
|
2013-02-21 15:27:22 -08:00 |
|
i2c.c
|
PTR_RET is now PTR_ERR_OR_ZERO(): Replace most.
|
2013-07-15 11:25:01 +09:30 |
|
i2c.h
|
ARM: OMAP: Fix relative includes for shared i2c.h file
|
2012-10-31 15:37:13 -07:00 |
|
id.c
|
ARM: OMAP2+: AM43x: determine features
|
2014-02-28 15:33:27 -08:00 |
|
id.h
|
ARM: OMAP2+: Make id.h local
|
2012-09-20 15:02:22 -07:00 |
|
io.c
|
i.MX SoC changes for 3.15:
|
2014-03-09 12:03:18 -07:00 |
|
iomap.h
|
ARM: OMAP5: Add minimal support for OMAP5430 SOC
|
2012-07-09 19:14:39 +05:30 |
|
irq.c
|
ARM: OMAP2+: INTC: Acknowledge stuck active interrupts
|
2014-03-13 13:34:48 -07:00 |
|
Kconfig
|
ARM: SoC: driver changes
|
2014-04-05 15:37:40 -07:00 |
|
l3_2xxx.h
|
ARM: OMAP2+: Make l3_2xxx.h local
|
2012-09-20 15:03:59 -07:00 |
|
l3_3xxx.h
|
ARM: OMAP2+: Make l3_3xxx.h local
|
2012-09-20 15:04:00 -07:00 |
|
l4_2xxx.h
|
ARM: OMAP2+: Make l4_2xxx.h local
|
2012-09-20 15:04:01 -07:00 |
|
l4_3xxx.h
|
ARM: OMAP2+: Make l4_3xxx.h local
|
2012-09-20 15:04:03 -07:00 |
|
Makefile
|
ARM: OMAP2+: AM43xx: implement support for machine restart
|
2014-02-28 12:43:45 -07:00 |
|
Makefile.boot
|
ARM: dtb: move all dtb targets to common Makefile
|
2012-09-20 22:58:17 -07:00 |
|
mcbsp.c
|
ARM: OMAP3: McBSP: do not access CM register directly
|
2013-10-19 10:11:51 -06:00 |
|
mmc.h
|
ARM: OMAP: Split plat/mmc.h into local headers and platform_data
|
2012-10-15 12:09:43 -07:00 |
|
msdi.c
|
ARM: OMAP2+: Remove legacy booting support for n8x0
|
2013-11-25 15:31:17 -08:00 |
|
mux34xx.c
|
ARM: OMAP2+: mux: fix trivial typo in name
|
2013-09-18 12:02:01 -07:00 |
|
mux34xx.h
|
omap: mux: add AM/DM37x gpios
|
2013-05-08 17:07:40 -07:00 |
|
mux.c
|
ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap
|
2013-10-10 15:46:30 -07:00 |
|
mux.h
|
ARM: OMAP2+: remove OMAP_PACKAGE_ZAC and OMAP_PACKAGE_ZAF
|
2014-02-28 15:36:34 -08:00 |
|
omap2-restart.c
|
reboot: arm: change reboot_mode to use enum reboot_mode
|
2013-07-09 10:33:29 -07:00 |
|
omap3-restart.c
|
reboot: arm: change reboot_mode to use enum reboot_mode
|
2013-07-09 10:33:29 -07:00 |
|
omap4-common.c
|
ARM: DRA: Enable Crossbar IP support for DRA7XX
|
2014-02-05 20:09:11 +05:30 |
|
omap4-keypad.h
|
ARM: OMAP2+: Make omap4-keypad.h local
|
2012-09-20 15:04:04 -07:00 |
|
omap4-restart.c
|
reboot: arm: change reboot_mode to use enum reboot_mode
|
2013-07-09 10:33:29 -07:00 |
|
omap4-sar-layout.h
|
ARM: arm-soc cleanup for 3.10
|
2013-05-02 09:03:55 -07:00 |
|
omap24xx.h
|
ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2
|
2012-09-12 18:06:31 -07:00 |
|
omap34xx.h
|
ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2
|
2012-09-12 18:06:31 -07:00 |
|
omap44xx.h
|
ARM: OMAP: Make use of available scu_a9_get_base() interface
|
2013-01-28 10:41:39 -07:00 |
|
omap54xx.h
|
ARM: DRA7: Reuse io tables and add a new .init_early
|
2013-08-13 11:00:35 +05:30 |
|
omap_device.c
|
Linux 3.13-rc5
|
2013-12-28 21:38:16 -08:00 |
|
omap_device.h
|
ARM: OMAP2+: omap_device: add fail hook for runtime_pm when bad data is detected
|
2013-12-10 09:39:52 -08:00 |
|
omap_hwmod_2xxx_3xxx_interconnect_data.c
|
ARM: OMAP: Split plat/serial.h for omap1 and omap2+
|
2012-10-24 13:34:31 -07:00 |
|
omap_hwmod_2xxx_3xxx_ipblock_data.c
|
ARM: OMAP2+: Remove dma.h
|
2013-06-18 00:12:34 -07:00 |
|
omap_hwmod_2xxx_interconnect_data.c
|
ARM: OMAP2+: Remove legacy hwmod entries for omap2
|
2013-11-25 15:31:18 -08:00 |
|
omap_hwmod_2xxx_ipblock_data.c
|
ARM: OMAP2+: hwmod_data: fix missing OMAP_INTC_START in irq data
|
2013-12-25 21:41:27 -07:00 |
|
omap_hwmod_3xxx_data.c
|
== Changes to existing drivers ==
|
2014-04-07 10:24:18 -07:00 |
|
omap_hwmod_7xx_data.c
|
ARM: DRA7: hwmod data: correct the sysc data for spinlock
|
2014-02-19 11:34:47 -07:00 |
|
omap_hwmod_33xx_43xx_common_data.h
|
ARM: OMAP2+: hwmod: AM43x support
|
2013-10-13 22:48:46 -06:00 |
|
omap_hwmod_33xx_43xx_interconnect_data.c
|
ARM: OMAP2+: hwmod: AM335x/AM43x: move common data
|
2013-10-13 22:47:39 -06:00 |
|
omap_hwmod_33xx_43xx_ipblock_data.c
|
ARM: OMAP2+: hwmod: AM43x support
|
2013-10-13 22:48:46 -06:00 |
|
omap_hwmod_33xx_data.c
|
ARM: OMAP2+: hwmod: AM335x: runtime register update
|
2013-10-13 22:47:56 -06:00 |
|
omap_hwmod_43xx_data.c
|
ARM: AM43x: hwmod data: register spinlock OCP interface
|
2014-02-28 12:43:46 -07:00 |
|
omap_hwmod_44xx_data.c
|
ARM: OMAP4: hwmod data: correct the idlemodes for spinlock
|
2014-03-13 14:09:57 -07:00 |
|
omap_hwmod_54xx_data.c
|
ARM: OMAP5: hwmod data: add mmu data for ipu & dsp
|
2014-03-12 09:49:47 -07:00 |
|
omap_hwmod_2420_data.c
|
ARM: OMAP2+: Remove legacy hwmod entries for omap2
|
2013-11-25 15:31:18 -08:00 |
|
omap_hwmod_2430_data.c
|
ARM: OMAP2+: Remove legacy hwmod entries for omap2
|
2013-11-25 15:31:18 -08:00 |
|
omap_hwmod_common_data.c
|
ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2
|
2012-10-18 16:05:55 -07:00 |
|
omap_hwmod_common_data.h
|
ARM: OMAP2+: Remove legacy hwmod entries for omap2
|
2013-11-25 15:31:18 -08:00 |
|
omap_hwmod_reset.c
|
ARM: omap2: include linux/errno.h in hwmod_reset
|
2013-02-15 13:36:47 +01:00 |
|
omap_hwmod.c
|
ARM: OMAP4: hwmod: Fix SOFTRESET logic for OMAP4
|
2014-02-19 12:07:00 -07:00 |
|
omap_hwmod.h
|
ARM: OMAP2+: hwmod: AM43x support
|
2013-10-13 22:48:46 -06:00 |
|
omap_opp_data.h
|
Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock
|
2012-11-13 13:25:38 -08:00 |
|
omap_phy_internal.c
|
ARM: OMAP2+: Use omap initcalls
|
2013-01-11 11:24:18 -08:00 |
|
omap_twl.c
|
ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER
|
2012-12-17 10:50:41 -08:00 |
|
omap-headsmp.S
|
arm: delete __cpuinit/__CPUINIT usage from all ARM users
|
2013-07-14 19:36:52 -04:00 |
|
omap-hotplug.c
|
ARM: cpu hotplug: remove majority of cache flushing from platforms
|
2013-04-18 20:08:04 +01:00 |
|
omap-iommu.c
|
iommu/omap: Add devicetree support
|
2014-03-04 17:01:57 +01:00 |
|
omap-mpuss-lowpower.c
|
ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidle
|
2014-01-31 14:57:32 -08:00 |
|
omap-pm-noop.c
|
ARM: OMAP: Move omap-pm-noop.c local to mach-omap2
|
2012-10-31 15:37:13 -07:00 |
|
omap-pm.h
|
PM / OPP: rename header to linux/pm_opp.h
|
2013-10-25 22:33:23 +02:00 |
|
omap-secure.c
|
RX-51: Add support for OMAP3 ROM Random Number Generator
|
2013-10-08 12:02:12 -07:00 |
|
omap-secure.h
|
ARM: OMAP2+: Fix undefined reference to set_cntfreq
|
2013-11-18 15:33:16 -08:00 |
|
omap-smc.S
|
ARM: OMAP3: Add secure function omap_smc3() which calling instruction smc #1
|
2013-10-08 11:55:32 -07:00 |
|
omap-smp.c
|
ARM: OMAP4+: move errata initialization to omap4_pm_init_early
|
2014-01-31 14:57:37 -08:00 |
|
omap-wakeupgen.c
|
ARM: OMAP4+: Correct Wakeup-gen code to use physical irq number
|
2014-02-05 20:08:34 +05:30 |
|
omap-wakeupgen.h
|
ARM: OMAP2+: Make omap-wakeupgen.h local
|
2012-09-20 15:02:37 -07:00 |
|
opp2xxx.h
|
|
|
|
opp3xxx_data.c
|
ARM: OMAP2+: Use omap initcalls
|
2013-01-11 11:24:18 -08:00 |
|
opp4xxx_data.c
|
ARM: OMAP2+: Use omap initcalls
|
2013-01-11 11:24:18 -08:00 |
|
opp2420_data.c
|
ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+
|
2012-09-12 18:06:31 -07:00 |
|
opp2430_data.c
|
ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+
|
2012-09-12 18:06:31 -07:00 |
|
opp.c
|
ACPI and power management updates for 3.13-rc1
|
2013-11-14 13:41:48 +09:00 |
|
pdata-quirks.c
|
fbdev changes for 3.15 (OMAP)
|
2014-04-07 10:47:51 -07:00 |
|
pm24xx.c
|
ARM: OMAP2: CM/PM: remove direct register accesses outside CM code
|
2013-10-19 10:11:51 -06:00 |
|
pm34xx.c
|
ARM: OMAP3: PM: remove access to PRM_VOLTCTRL register
|
2014-04-10 11:01:09 -07:00 |
|
pm44xx.c
|
ARM: OMAP4+: move errata initialization to omap4_pm_init_early
|
2014-01-31 14:57:37 -08:00 |
|
pm-debug.c
|
Merge branch 'cleanup' into for-linus
|
2013-05-02 21:31:29 +01:00 |
|
pm.c
|
ACPI and power management updates for 3.13-rc1
|
2013-11-14 13:41:48 +09:00 |
|
pm.h
|
ARM: OMAP4: Fix definition of IS_PM44XX_ERRATUM
|
2014-03-13 13:41:50 -07:00 |
|
pmu.c
|
ARM: OMAP2+: Cocci spatch "ptr_ret.spatch"
|
2013-07-04 05:10:51 -07:00 |
|
powerdomain-common.c
|
|
|
|
powerdomain.c
|
ARM: OMAP2+: Powerdomain: Fix unchecked dereference of arch_pwrdm
|
2013-12-02 11:38:14 -08:00 |
|
powerdomain.h
|
ARM: OMAP2+: PM: AM43x powerdomain data
|
2013-10-13 22:48:25 -06:00 |
|
powerdomains2xxx_3xxx_data.c
|
ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments
|
2013-01-29 14:59:58 -07:00 |
|
powerdomains2xxx_3xxx_data.h
|
|
|
|
powerdomains2xxx_data.c
|
ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments
|
2013-01-29 14:59:58 -07:00 |
|
powerdomains3xxx_data.c
|
ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX
|
2013-08-23 04:48:42 -06:00 |
|
powerdomains7xx_data.c
|
ARM: OMAP: DRA7: powerdomain: Add DRA7XX data and update header
|
2013-08-23 04:28:36 -06:00 |
|
powerdomains33xx_data.c
|
ARM: OMAP AM33xx: powerdomains: add AM335x support
|
2012-06-18 12:08:06 -06:00 |
|
powerdomains43xx_data.c
|
ARM: OMAP2+: PM: AM43x powerdomain data
|
2013-10-13 22:48:25 -06:00 |
|
powerdomains44xx_data.c
|
|
|
|
powerdomains54xx_data.c
|
ARM: OMAP5: PRM/CM: Cleanup unused header
|
2013-07-21 22:10:25 -06:00 |
|
prcm43xx.h
|
ARM: OMAP2: hwmod: Add qspi data for am437x.
|
2013-10-15 23:49:43 -06:00 |
|
prcm44xx.h
|
ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters
|
2013-08-23 04:28:36 -06:00 |
|
prcm_mpu7xx.h
|
ARM: OMAP: DRA7: PRCM: Add DRA7XX local MPU PRCM regsiters
|
2013-08-23 04:28:36 -06:00 |
|
prcm_mpu44xx.c
|
ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup
|
2012-11-08 15:09:26 -07:00 |
|
prcm_mpu44xx.h
|
ARM: OMAP4+: PRCM MPU: Move function prototypes to common header for re-use
|
2013-06-08 11:54:40 -06:00 |
|
prcm_mpu54xx.h
|
ARM: OMAP5: PRCM: Add OMAP54XX local MPU PRCM registers
|
2013-06-08 11:55:18 -06:00 |
|
prcm_mpu_44xx_54xx.h
|
ARM: OMAP4+: PRCM MPU: Move function prototypes to common header for re-use
|
2013-06-08 11:54:40 -06:00 |
|
prcm-common.h
|
ARM: OMAP: TI81XX: add always-on powerdomain for TI81XX
|
2013-08-23 04:48:42 -06:00 |
|
prm2xxx_3xxx.c
|
ARM: OMAP2+: clockdomain: convert existing atomic usecounts into spinlock-protected shorts/ints
|
2013-01-29 14:59:58 -07:00 |
|
prm2xxx_3xxx.h
|
ARM: OMAP3: clock: Add 3xxx data using common struct clk
|
2012-11-12 19:18:49 -07:00 |
|
prm2xxx.c
|
Some OMAP PRCM and sparse fixes against v3.8-rc1. A basic set of test
|
2013-01-03 11:04:21 -08:00 |
|
prm2xxx.h
|
ARM: OMAP2+: PRM: initialize some PRM functions early
|
2012-11-21 16:15:16 -07:00 |
|
prm3xxx.c
|
ARM: OMAP2+: Use omap initcalls
|
2013-01-11 11:24:18 -08:00 |
|
prm3xxx.h
|
ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap
|
2013-10-10 15:46:30 -07:00 |
|
prm7xx.h
|
ARM: OMAP: DRA7: PRM: Add DRA7XX register definitions
|
2013-08-23 04:04:23 -06:00 |
|
prm33xx.c
|
ARM: AM33xx: Remove the unused voltagedomain data
|
2013-06-17 07:26:44 -07:00 |
|
prm33xx.h
|
ARM: OMAP2+: AM33XX: Update the hardreset API
|
2013-02-08 07:25:28 -07:00 |
|
prm44xx_54xx.h
|
ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain
|
2013-11-18 11:03:37 -08:00 |
|
prm44xx.c
|
ARM: OMAP: DRA7: Enable PM framework initializations
|
2013-08-23 04:29:37 -06:00 |
|
prm44xx.h
|
ARM: OMAP4+: PRM: Move function prototypes to common header for re-use
|
2013-06-08 11:02:20 -06:00 |
|
prm54xx.h
|
ARM: OMAP5: PRM: Add OMAP54XX register and bitfield files
|
2013-06-08 11:41:01 -06:00 |
|
prm_common.c
|
ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT
|
2014-01-17 12:37:11 -08:00 |
|
prm-regbits-24xx.h
|
ARM: OMAP2: PRM/CM: Cleanup unused header
|
2013-07-21 21:13:59 -06:00 |
|
prm-regbits-33xx.h
|
ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK
|
2013-08-29 19:10:59 -07:00 |
|
prm-regbits-34xx.h
|
ARM: OMAP3: PRM/CM: Cleanup unused header
|
2013-07-21 22:10:03 -06:00 |
|
prm-regbits-44xx.h
|
ARM: OMAP4: PRM/CM: Cleanup unused header
|
2013-07-21 22:10:14 -06:00 |
|
prm.h
|
ARM: OMAP2+: PRM: add support for initializing PRCM clock modules from DT
|
2014-01-17 12:37:11 -08:00 |
|
prminst44xx.c
|
ARM: SoC specific changes
|
2014-04-05 14:19:54 -07:00 |
|
prminst44xx.h
|
ARM: OMAP2+: PRCM: split and relocate the PRM/CM globals setup
|
2012-11-08 15:09:26 -07:00 |
|
scrm44xx.h
|
ARM: OMAP4: clock: Add 44xx data using common struct clk
|
2012-11-12 19:10:20 -07:00 |
|
scrm54xx.h
|
ARM: OMAP5: SCRM: Add OMAP54XX header file.
|
2013-06-08 11:55:44 -06:00 |
|
sdram-hynix-h8mbx00u0mer-0em.h
|
ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h
|
2012-10-17 10:18:37 -07:00 |
|
sdram-micron-mt46h32m32lf-6.h
|
ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h
|
2012-10-17 10:18:37 -07:00 |
|
sdram-nokia.c
|
ARM: OMAP: remove plat/clock.h
|
2012-10-18 16:23:20 -07:00 |
|
sdram-nokia.h
|
|
|
|
sdram-numonyx-m65kxxxxam.h
|
ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h
|
2012-10-17 10:18:37 -07:00 |
|
sdram-qimonda-hyb18m512160af-6.h
|
ARM: OMAP: move plat-omap/include/plat/sdrc.h into mach-omap2/sdrc.h
|
2012-10-17 10:18:37 -07:00 |
|
sdrc2xxx.c
|
omap prcm changes via Paul Walmsley <paul@pwsan.com>:
|
2012-11-30 08:40:31 -08:00 |
|
sdrc.c
|
omap prcm changes via Paul Walmsley <paul@pwsan.com>:
|
2012-11-30 08:40:31 -08:00 |
|
sdrc.h
|
ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code
|
2012-11-08 12:33:07 -07:00 |
|
serial.c
|
ARM: OMAP2+: hwmod: Fix a crash in _setup_reset() with DEBUG_LL
|
2013-07-30 05:13:35 -06:00 |
|
serial.h
|
ARM: OMAP2+: Fix relative includes for serial.h
|
2012-10-31 15:37:14 -07:00 |
|
sleep24xx.S
|
ARM: OMAP2xxx: PM: enter WFI via inline asm if CORE stays active
|
2013-02-06 13:48:14 -07:00 |
|
sleep34xx.S
|
omap prcm changes via Paul Walmsley <paul@pwsan.com>:
|
2012-11-30 08:40:31 -08:00 |
|
sleep44xx.S
|
ARM: OMAP4: sleep: build OMAP4 specific functions only for OMAP4
|
2013-07-04 05:10:51 -07:00 |
|
smartreflex-class3.c
|
PM / AVS: SmartReflex: use omap_sr * for enable/disable interface
|
2013-06-10 10:46:18 -07:00 |
|
soc.h
|
ARM: OMAP2+: AM43x: Add ID for ES1.1
|
2014-02-28 15:33:26 -08:00 |
|
sr_device.c
|
ARM: OMAP2+: fix some omap_device_build() calls that aren't compiled by default
|
2013-02-12 09:00:33 -08:00 |
|
sram34xx.S
|
ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files
|
2012-10-21 01:01:11 -06:00 |
|
sram242x.S
|
ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files
|
2012-10-21 01:01:11 -06:00 |
|
sram243x.S
|
ARM: OMAP2+: CM/hwmod: split CM functions into OMAP2, OMAP3-specific files
|
2012-10-21 01:01:11 -06:00 |
|
sram.c
|
ARM: OMAP2+: AM43x: SRAM base and size
|
2013-06-12 08:07:23 -07:00 |
|
sram.h
|
ARM: OMAP: Split sram.h to local headers and minimal shared header
|
2012-10-31 10:14:13 -07:00 |
|
ti81xx.h
|
ARM: OMAP2+: common: remove mach-omap2/common.c globals and map_common_io code
|
2012-11-08 12:33:07 -07:00 |
|
timer.c
|
ARM: OMAP2+: AM43x: Use gptimer as clocksource
|
2014-02-28 15:33:27 -08:00 |
|
twl-common.c
|
arm: omap3: twl: add phy consumer data in twl4030_usb_data
|
2013-09-27 17:36:58 -07:00 |
|
twl-common.h
|
ARM: OMAP2+: twl-common: Allow boards to customize the twl4030 audio setup
|
2013-01-22 10:34:50 +01:00 |
|
usb-host.c
|
ARM: OMAP2+: usb-host: Adapt to USB phy-nop RESET line changes
|
2013-10-04 09:29:11 -05:00 |
|
usb-musb.c
|
ARM: OMAP2: fix musb usage for n8x0
|
2013-08-16 09:39:56 -07:00 |
|
usb-tusb6010.c
|
ARM: OMAP2+: Convert TUSB to use gpmc_cs_program_settings()
|
2013-04-01 14:53:43 -05:00 |
|
usb.h
|
ARM: OMAP2+: omap-usb-host: Get rid of platform_data from struct usbhs_phy_data
|
2013-10-04 09:29:10 -05:00 |
|
vc3xxx_data.c
|
ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains
|
2012-11-05 15:08:22 -08:00 |
|
vc44xx_data.c
|
ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains
|
2012-11-05 15:08:22 -08:00 |
|
vc.c
|
Merge branch 'next/pm-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/pm
|
2012-11-30 09:12:33 -08:00 |
|
vc.h
|
ARM: OMAP3: VC: calculate ramp times
|
2012-11-05 15:08:23 -08:00 |
|
voltage.c
|
ARM: OMAP: unwrap strings
|
2012-09-12 02:57:10 -06:00 |
|
voltage.h
|
Merge branch 'omap/pm-voltdomain-cleanup' into next/soc
|
2013-06-20 17:35:16 +02:00 |
|
voltagedomains2xxx_data.c
|
|
|
|
voltagedomains3xxx_data.c
|
ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains
|
2012-11-05 15:08:22 -08:00 |
|
voltagedomains44xx_data.c
|
Merge branch 'omap-for-v3.8/pm' into omap-for-v3.8/clock
|
2012-11-13 13:25:38 -08:00 |
|
voltagedomains54xx_data.c
|
ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
|
2013-06-25 17:11:06 -07:00 |
|
vp3xxx_data.c
|
ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains
|
2012-11-05 15:08:22 -08:00 |
|
vp44xx_data.c
|
ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains
|
2012-11-05 15:08:22 -08:00 |
|
vp.c
|
OMAP voltage layer updates towards supporting auto-retention/auto-off
|
2012-11-06 17:06:37 -08:00 |
|
vp.h
|
ARM: OMAP3+: voltage: introduce omap vc / vp params for voltagedomains
|
2012-11-05 15:08:22 -08:00 |
|
wd_timer.c
|
arm-soc: soc-specific updates
|
2013-02-21 15:27:22 -08:00 |
|
wd_timer.h
|
ARM: OMAP: Make plat/omap_hwmod.h local to mach-omap2
|
2012-10-18 16:05:55 -07:00 |
