renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 20:23:57 +08:00
Code
cd7798cbd2
linux-next/drivers/iio/adc/spear_adc.c
Alexandru Ardelean d3be83244c iio: remove explicit IIO device parent assignment 
This patch applies the semantic patch:
@@
expression I, P, SP;
@@
   I = devm_iio_device_alloc(P, SP);
   ...
-  I->dev.parent = P;

It updates 302 files and does 307 deletions.
This semantic patch also removes some comments like
'/* Establish that the iio_dev is a child of the i2c device */'

But this is is only done in case where the block is left empty.

The patch does not seem to cover all cases. It looks like in some cases a
different variable is used in some cases to assign the parent, but it
points to the same reference.
In other cases, the block covered by ... may be just too big to be covered
by the semantic patch.

However, this looks pretty good as well, as it does cover a big bulk of the
drivers that should remove the parent assignment.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-06-14 11:49:59 +01:00

390 lines
9.1 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* ST SPEAr ADC driver
*
* Copyright 2012 Stefan Roese <sr@denx.de>
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/completion.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
/* SPEAR registers definitions */
#define SPEAR600_ADC_SCAN_RATE_LO(x) ((x) & 0xFFFF)
#define SPEAR600_ADC_SCAN_RATE_HI(x) (((x) >> 0x10) & 0xFFFF)
#define SPEAR_ADC_CLK_LOW(x) (((x) & 0xf) << 0)
#define SPEAR_ADC_CLK_HIGH(x) (((x) & 0xf) << 4)
/* Bit definitions for SPEAR_ADC_STATUS */
#define SPEAR_ADC_STATUS_START_CONVERSION BIT(0)
#define SPEAR_ADC_STATUS_CHANNEL_NUM(x) ((x) << 1)
#define SPEAR_ADC_STATUS_ADC_ENABLE BIT(4)
#define SPEAR_ADC_STATUS_AVG_SAMPLE(x) ((x) << 5)
#define SPEAR_ADC_STATUS_VREF_INTERNAL BIT(9)
#define SPEAR_ADC_DATA_MASK 0x03ff
#define SPEAR_ADC_DATA_BITS 10
#define SPEAR_ADC_MOD_NAME "spear-adc"
#define SPEAR_ADC_CHANNEL_NUM 8
#define SPEAR_ADC_CLK_MIN 2500000
#define SPEAR_ADC_CLK_MAX 20000000
struct adc_regs_spear3xx {
u32 status;
u32 average;
u32 scan_rate;
u32 clk; /* Not avail for 1340 & 1310 */
u32 ch_ctrl[SPEAR_ADC_CHANNEL_NUM];
u32 ch_data[SPEAR_ADC_CHANNEL_NUM];
};
struct chan_data {
u32 lsb;
u32 msb;
};
struct adc_regs_spear6xx {
u32 status;
u32 pad[2];
u32 clk;
u32 ch_ctrl[SPEAR_ADC_CHANNEL_NUM];
struct chan_data ch_data[SPEAR_ADC_CHANNEL_NUM];
u32 scan_rate_lo;
u32 scan_rate_hi;
struct chan_data average;
};
struct spear_adc_state {
struct device_node *np;
struct adc_regs_spear3xx __iomem *adc_base_spear3xx;
struct adc_regs_spear6xx __iomem *adc_base_spear6xx;
struct clk *clk;
struct completion completion;
u32 current_clk;
u32 sampling_freq;
u32 avg_samples;
u32 vref_external;
u32 value;
};
/*
* Functions to access some SPEAr ADC register. Abstracted into
* static inline functions, because of different register offsets
* on different SoC variants (SPEAr300 vs SPEAr600 etc).
*/
static void spear_adc_set_status(struct spear_adc_state *st, u32 val)
{
__raw_writel(val, &st->adc_base_spear6xx->status);
}
static void spear_adc_set_clk(struct spear_adc_state *st, u32 val)
{
u32 clk_high, clk_low, count;
u32 apb_clk = clk_get_rate(st->clk);
count = DIV_ROUND_UP(apb_clk, val);
clk_low = count / 2;
clk_high = count - clk_low;
st->current_clk = apb_clk / count;
__raw_writel(SPEAR_ADC_CLK_LOW(clk_low) | SPEAR_ADC_CLK_HIGH(clk_high),
&st->adc_base_spear6xx->clk);
}
static void spear_adc_set_ctrl(struct spear_adc_state *st, int n,
u32 val)
{
__raw_writel(val, &st->adc_base_spear6xx->ch_ctrl[n]);
}
static u32 spear_adc_get_average(struct spear_adc_state *st)
{
if (of_device_is_compatible(st->np, "st,spear600-adc")) {
return __raw_readl(&st->adc_base_spear6xx->average.msb) &
SPEAR_ADC_DATA_MASK;
} else {
return __raw_readl(&st->adc_base_spear3xx->average) &
SPEAR_ADC_DATA_MASK;
}
}
static void spear_adc_set_scanrate(struct spear_adc_state *st, u32 rate)
{
if (of_device_is_compatible(st->np, "st,spear600-adc")) {
__raw_writel(SPEAR600_ADC_SCAN_RATE_LO(rate),
&st->adc_base_spear6xx->scan_rate_lo);
__raw_writel(SPEAR600_ADC_SCAN_RATE_HI(rate),
&st->adc_base_spear6xx->scan_rate_hi);
} else {
__raw_writel(rate, &st->adc_base_spear3xx->scan_rate);
}
}
static int spear_adc_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val,
int *val2,
long mask)
{
struct spear_adc_state *st = iio_priv(indio_dev);
u32 status;
switch (mask) {
case IIO_CHAN_INFO_RAW:
mutex_lock(&indio_dev->mlock);
status = SPEAR_ADC_STATUS_CHANNEL_NUM(chan->channel) |
SPEAR_ADC_STATUS_AVG_SAMPLE(st->avg_samples) |
SPEAR_ADC_STATUS_START_CONVERSION |
SPEAR_ADC_STATUS_ADC_ENABLE;
if (st->vref_external == 0)
status |= SPEAR_ADC_STATUS_VREF_INTERNAL;
spear_adc_set_status(st, status);
wait_for_completion(&st->completion); /* set by ISR */
*val = st->value;
mutex_unlock(&indio_dev->mlock);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = st->vref_external;
*val2 = SPEAR_ADC_DATA_BITS;
return IIO_VAL_FRACTIONAL_LOG2;
case IIO_CHAN_INFO_SAMP_FREQ:
*val = st->current_clk;
return IIO_VAL_INT;
}
return -EINVAL;
}
static int spear_adc_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val,
int val2,
long mask)
{
struct spear_adc_state *st = iio_priv(indio_dev);
int ret = 0;
if (mask != IIO_CHAN_INFO_SAMP_FREQ)
return -EINVAL;
mutex_lock(&indio_dev->mlock);
if ((val < SPEAR_ADC_CLK_MIN) ||
(val > SPEAR_ADC_CLK_MAX) ||
(val2 != 0)) {
ret = -EINVAL;
goto out;
}
spear_adc_set_clk(st, val);
out:
mutex_unlock(&indio_dev->mlock);
return ret;
}
#define SPEAR_ADC_CHAN(idx) { \
.type = IIO_VOLTAGE, \
.indexed = 1, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
.channel = idx, \
}
static const struct iio_chan_spec spear_adc_iio_channels[] = {
SPEAR_ADC_CHAN(0),
SPEAR_ADC_CHAN(1),
SPEAR_ADC_CHAN(2),
SPEAR_ADC_CHAN(3),
SPEAR_ADC_CHAN(4),
SPEAR_ADC_CHAN(5),
SPEAR_ADC_CHAN(6),
SPEAR_ADC_CHAN(7),
};
static irqreturn_t spear_adc_isr(int irq, void *dev_id)
{
struct spear_adc_state *st = dev_id;
/* Read value to clear IRQ */
st->value = spear_adc_get_average(st);
complete(&st->completion);
return IRQ_HANDLED;
}
static int spear_adc_configure(struct spear_adc_state *st)
{
int i;
/* Reset ADC core */
spear_adc_set_status(st, 0);
__raw_writel(0, &st->adc_base_spear6xx->clk);
for (i = 0; i < 8; i++)
spear_adc_set_ctrl(st, i, 0);
spear_adc_set_scanrate(st, 0);
spear_adc_set_clk(st, st->sampling_freq);
return 0;
}
static const struct iio_info spear_adc_info = {
.read_raw = &spear_adc_read_raw,
.write_raw = &spear_adc_write_raw,
};
static int spear_adc_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct device *dev = &pdev->dev;
struct spear_adc_state *st;
struct iio_dev *indio_dev = NULL;
int ret = -ENODEV;
int irq;
indio_dev = devm_iio_device_alloc(dev, sizeof(struct spear_adc_state));
if (!indio_dev) {
dev_err(dev, "failed allocating iio device\n");
return -ENOMEM;
}
st = iio_priv(indio_dev);
st->np = np;
/*
* SPEAr600 has a different register layout than other SPEAr SoC's
* (e.g. SPEAr3xx). Let's provide two register base addresses
* to support multi-arch kernels.
*/
st->adc_base_spear6xx = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(st->adc_base_spear6xx))
return PTR_ERR(st->adc_base_spear6xx);
st->adc_base_spear3xx =
(struct adc_regs_spear3xx __iomem *)st->adc_base_spear6xx;
st->clk = devm_clk_get(dev, NULL);
if (IS_ERR(st->clk)) {
dev_err(dev, "failed getting clock\n");
return PTR_ERR(st->clk);
}
ret = clk_prepare_enable(st->clk);
if (ret) {
dev_err(dev, "failed enabling clock\n");
return ret;
}
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
ret = -EINVAL;
goto errout2;
}
ret = devm_request_irq(dev, irq, spear_adc_isr, 0, SPEAR_ADC_MOD_NAME,
st);
if (ret < 0) {
dev_err(dev, "failed requesting interrupt\n");
goto errout2;
}
if (of_property_read_u32(np, "sampling-frequency",
&st->sampling_freq)) {
dev_err(dev, "sampling-frequency missing in DT\n");
ret = -EINVAL;
goto errout2;
}
/*
* Optional avg_samples defaults to 0, resulting in single data
* conversion
*/
of_property_read_u32(np, "average-samples", &st->avg_samples);
/*
* Optional vref_external defaults to 0, resulting in internal vref
* selection
*/
of_property_read_u32(np, "vref-external", &st->vref_external);
spear_adc_configure(st);
platform_set_drvdata(pdev, indio_dev);
init_completion(&st->completion);
indio_dev->name = SPEAR_ADC_MOD_NAME;
indio_dev->info = &spear_adc_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = spear_adc_iio_channels;
indio_dev->num_channels = ARRAY_SIZE(spear_adc_iio_channels);
ret = iio_device_register(indio_dev);
if (ret)
goto errout2;
dev_info(dev, "SPEAR ADC driver loaded, IRQ %d\n", irq);
return 0;
errout2:
clk_disable_unprepare(st->clk);
return ret;
}
static int spear_adc_remove(struct platform_device *pdev)
{
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct spear_adc_state *st = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
clk_disable_unprepare(st->clk);
return 0;
}
#ifdef CONFIG_OF
static const struct of_device_id spear_adc_dt_ids[] = {
{ .compatible = "st,spear600-adc", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, spear_adc_dt_ids);
#endif
static struct platform_driver spear_adc_driver = {
.probe = spear_adc_probe,
.remove = spear_adc_remove,
.driver = {
.name = SPEAR_ADC_MOD_NAME,
.of_match_table = of_match_ptr(spear_adc_dt_ids),
},
};
module_platform_driver(spear_adc_driver);
MODULE_AUTHOR("Stefan Roese <sr@denx.de>");
MODULE_DESCRIPTION("SPEAr ADC driver");
MODULE_LICENSE("GPL");
View Git Blame Copy Permalink