2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-19 18:53:52 +08:00
linux-next/arch/arm/mach-shmobile/board-kzm9g.c
Kuninori Morimoto cc2512bc67 ARM: mach-shmobile: kzm9g: add MMCIF support
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-05-12 22:34:17 +02:00

339 lines
7.9 KiB
C

/*
* KZM-A9-GT board support
*
* Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/i2c.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mmcif.h>
#include <linux/platform_device.h>
#include <linux/smsc911x.h>
#include <linux/usb/r8a66597.h>
#include <linux/videodev2.h>
#include <mach/irqs.h>
#include <mach/sh73a0.h>
#include <mach/common.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <video/sh_mobile_lcdc.h>
/* SMSC 9221 */
static struct resource smsc9221_resources[] = {
[0] = {
.start = 0x10000000, /* CS4 */
.end = 0x100000ff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = intcs_evt2irq(0x260), /* IRQ3 */
.flags = IORESOURCE_IRQ,
},
};
static struct smsc911x_platform_config smsc9221_platdata = {
.flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
.phy_interface = PHY_INTERFACE_MODE_MII,
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
};
static struct platform_device smsc_device = {
.name = "smsc911x",
.dev = {
.platform_data = &smsc9221_platdata,
},
.resource = smsc9221_resources,
.num_resources = ARRAY_SIZE(smsc9221_resources),
};
/* USB external chip */
static struct r8a66597_platdata usb_host_data = {
.on_chip = 0,
.xtal = R8A66597_PLATDATA_XTAL_48MHZ,
};
static struct resource usb_resources[] = {
[0] = {
.start = 0x10010000,
.end = 0x1001ffff - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = intcs_evt2irq(0x220), /* IRQ1 */
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device usb_host_device = {
.name = "r8a66597_hcd",
.dev = {
.platform_data = &usb_host_data,
.dma_mask = NULL,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(usb_resources),
.resource = usb_resources,
};
/* LCDC */
static struct fb_videomode kzm_lcdc_mode = {
.name = "WVGA Panel",
.xres = 800,
.yres = 480,
.left_margin = 220,
.right_margin = 110,
.hsync_len = 70,
.upper_margin = 20,
.lower_margin = 5,
.vsync_len = 5,
.sync = 0,
};
static struct sh_mobile_lcdc_info lcdc_info = {
.clock_source = LCDC_CLK_BUS,
.ch[0] = {
.chan = LCDC_CHAN_MAINLCD,
.fourcc = V4L2_PIX_FMT_RGB565,
.interface_type = RGB24,
.lcd_modes = &kzm_lcdc_mode,
.num_modes = 1,
.clock_divider = 5,
.flags = 0,
.panel_cfg = {
.width = 152,
.height = 91,
},
}
};
static struct resource lcdc_resources[] = {
[0] = {
.name = "LCDC",
.start = 0xfe940000,
.end = 0xfe943fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = intcs_evt2irq(0x580),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device lcdc_device = {
.name = "sh_mobile_lcdc_fb",
.num_resources = ARRAY_SIZE(lcdc_resources),
.resource = lcdc_resources,
.dev = {
.platform_data = &lcdc_info,
.coherent_dma_mask = ~0,
},
};
/* MMCIF */
static struct resource sh_mmcif_resources[] = {
[0] = {
.name = "MMCIF",
.start = 0xe6bd0000,
.end = 0xe6bd00ff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = gic_spi(141),
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = gic_spi(140),
.flags = IORESOURCE_IRQ,
},
};
static struct sh_mmcif_plat_data sh_mmcif_platdata = {
.ocr = MMC_VDD_165_195,
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
};
static struct platform_device mmc_device = {
.name = "sh_mmcif",
.dev = {
.dma_mask = NULL,
.coherent_dma_mask = 0xffffffff,
.platform_data = &sh_mmcif_platdata,
},
.num_resources = ARRAY_SIZE(sh_mmcif_resources),
.resource = sh_mmcif_resources,
};
static struct i2c_board_info i2c1_devices[] = {
{
I2C_BOARD_INFO("st1232-ts", 0x55),
.irq = intcs_evt2irq(0x300), /* IRQ8 */
},
};
static struct platform_device *kzm_devices[] __initdata = {
&smsc_device,
&usb_host_device,
&lcdc_device,
&mmc_device,
};
/*
* FIXME
*
* This is quick hack for enabling LCDC backlight
*/
static int __init as3711_enable_lcdc_backlight(void)
{
struct i2c_adapter *a = i2c_get_adapter(0);
struct i2c_msg msg;
int i, ret;
__u8 magic[] = {
0x40, 0x2a,
0x43, 0x3c,
0x44, 0x3c,
0x45, 0x3c,
0x54, 0x03,
0x51, 0x00,
0x51, 0x01,
0xff, 0x00, /* wait */
0x43, 0xf0,
0x44, 0xf0,
0x45, 0xf0,
};
if (!machine_is_kzm9g())
return 0;
if (!a)
return 0;
msg.addr = 0x40;
msg.len = 2;
msg.flags = 0;
for (i = 0; i < ARRAY_SIZE(magic); i += 2) {
msg.buf = magic + i;
if (0xff == msg.buf[0]) {
udelay(500);
continue;
}
ret = i2c_transfer(a, &msg, 1);
if (ret < 0) {
pr_err("i2c transfer fail\n");
break;
}
}
return 0;
}
device_initcall(as3711_enable_lcdc_backlight);
static void __init kzm_init(void)
{
sh73a0_pinmux_init();
/* enable SCIFA4 */
gpio_request(GPIO_FN_SCIFA4_TXD, NULL);
gpio_request(GPIO_FN_SCIFA4_RXD, NULL);
gpio_request(GPIO_FN_SCIFA4_RTS_, NULL);
gpio_request(GPIO_FN_SCIFA4_CTS_, NULL);
/* CS4 for SMSC/USB */
gpio_request(GPIO_FN_CS4_, NULL); /* CS4 */
/* SMSC */
gpio_request(GPIO_PORT224, NULL); /* IRQ3 */
gpio_direction_input(GPIO_PORT224);
/* LCDC */
gpio_request(GPIO_FN_LCDD23, NULL);
gpio_request(GPIO_FN_LCDD22, NULL);
gpio_request(GPIO_FN_LCDD21, NULL);
gpio_request(GPIO_FN_LCDD20, NULL);
gpio_request(GPIO_FN_LCDD19, NULL);
gpio_request(GPIO_FN_LCDD18, NULL);
gpio_request(GPIO_FN_LCDD17, NULL);
gpio_request(GPIO_FN_LCDD16, NULL);
gpio_request(GPIO_FN_LCDD15, NULL);
gpio_request(GPIO_FN_LCDD14, NULL);
gpio_request(GPIO_FN_LCDD13, NULL);
gpio_request(GPIO_FN_LCDD12, NULL);
gpio_request(GPIO_FN_LCDD11, NULL);
gpio_request(GPIO_FN_LCDD10, NULL);
gpio_request(GPIO_FN_LCDD9, NULL);
gpio_request(GPIO_FN_LCDD8, NULL);
gpio_request(GPIO_FN_LCDD7, NULL);
gpio_request(GPIO_FN_LCDD6, NULL);
gpio_request(GPIO_FN_LCDD5, NULL);
gpio_request(GPIO_FN_LCDD4, NULL);
gpio_request(GPIO_FN_LCDD3, NULL);
gpio_request(GPIO_FN_LCDD2, NULL);
gpio_request(GPIO_FN_LCDD1, NULL);
gpio_request(GPIO_FN_LCDD0, NULL);
gpio_request(GPIO_FN_LCDDISP, NULL);
gpio_request(GPIO_FN_LCDDCK, NULL);
gpio_request(GPIO_PORT222, NULL); /* LCDCDON */
gpio_request(GPIO_PORT226, NULL); /* SC */
gpio_direction_output(GPIO_PORT222, 1);
gpio_direction_output(GPIO_PORT226, 1);
/* Touchscreen */
gpio_request(GPIO_PORT223, NULL); /* IRQ8 */
gpio_direction_input(GPIO_PORT223);
/* enable MMCIF */
gpio_request(GPIO_FN_MMCCLK0, NULL);
gpio_request(GPIO_FN_MMCCMD0_PU, NULL);
gpio_request(GPIO_FN_MMCD0_0_PU, NULL);
gpio_request(GPIO_FN_MMCD0_1_PU, NULL);
gpio_request(GPIO_FN_MMCD0_2_PU, NULL);
gpio_request(GPIO_FN_MMCD0_3_PU, NULL);
gpio_request(GPIO_FN_MMCD0_4_PU, NULL);
gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 64K*8way */
l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
#endif
i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices));
sh73a0_add_standard_devices();
platform_add_devices(kzm_devices, ARRAY_SIZE(kzm_devices));
}
MACHINE_START(KZM9G, "kzm9g")
.map_io = sh73a0_map_io,
.init_early = sh73a0_add_early_devices,
.nr_irqs = NR_IRQS_LEGACY,
.init_irq = sh73a0_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = kzm_init,
.timer = &shmobile_timer,
MACHINE_END