2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 22:53:55 +08:00
linux-next/drivers/gpio/gpio-xlp.c
Julia Lawall a0c81ce087 gpio: xlp: fix error return code
Return a negative error code on failure.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-08-26 14:49:23 +02:00

428 lines
12 KiB
C

/*
* Copyright (C) 2003-2015 Broadcom Corporation
* All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/of_device.h>
#include <linux/module.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
/*
* XLP GPIO has multiple 32 bit registers for each feature where each register
* controls 32 pins. So, pins up to 64 require 2 32-bit registers and up to 96
* require 3 32-bit registers for each feature.
* Here we only define offset of the first register for each feature. Offset of
* the registers for pins greater than 32 can be calculated as following(Use
* GPIO_INT_STAT as example):
*
* offset = (gpio / XLP_GPIO_REGSZ) * 4;
* reg_addr = addr + offset;
*
* where addr is base address of the that feature register and gpio is the pin.
*/
#define GPIO_OUTPUT_EN 0x00
#define GPIO_PADDRV 0x08
#define GPIO_INT_EN00 0x18
#define GPIO_INT_EN10 0x20
#define GPIO_INT_EN20 0x28
#define GPIO_INT_EN30 0x30
#define GPIO_INT_POL 0x38
#define GPIO_INT_TYPE 0x40
#define GPIO_INT_STAT 0x48
#define GPIO_9XX_BYTESWAP 0X00
#define GPIO_9XX_CTRL 0X04
#define GPIO_9XX_OUTPUT_EN 0x14
#define GPIO_9XX_PADDRV 0x24
/*
* Only for 4 interrupt enable reg are defined for now,
* total reg available are 12.
*/
#define GPIO_9XX_INT_EN00 0x44
#define GPIO_9XX_INT_EN10 0x54
#define GPIO_9XX_INT_EN20 0x64
#define GPIO_9XX_INT_EN30 0x74
#define GPIO_9XX_INT_POL 0x104
#define GPIO_9XX_INT_TYPE 0x114
#define GPIO_9XX_INT_STAT 0x124
#define GPIO_3XX_INT_EN00 0x18
#define GPIO_3XX_INT_EN10 0x20
#define GPIO_3XX_INT_EN20 0x28
#define GPIO_3XX_INT_EN30 0x30
#define GPIO_3XX_INT_POL 0x78
#define GPIO_3XX_INT_TYPE 0x80
#define GPIO_3XX_INT_STAT 0x88
/* Interrupt type register mask */
#define XLP_GPIO_IRQ_TYPE_LVL 0x0
#define XLP_GPIO_IRQ_TYPE_EDGE 0x1
/* Interrupt polarity register mask */
#define XLP_GPIO_IRQ_POL_HIGH 0x0
#define XLP_GPIO_IRQ_POL_LOW 0x1
#define XLP_GPIO_REGSZ 32
#define XLP_GPIO_IRQ_BASE 768
#define XLP_MAX_NR_GPIO 96
/* XLP variants supported by this driver */
enum {
XLP_GPIO_VARIANT_XLP832 = 1,
XLP_GPIO_VARIANT_XLP316,
XLP_GPIO_VARIANT_XLP208,
XLP_GPIO_VARIANT_XLP980,
XLP_GPIO_VARIANT_XLP532
};
struct xlp_gpio_priv {
struct gpio_chip chip;
DECLARE_BITMAP(gpio_enabled_mask, XLP_MAX_NR_GPIO);
void __iomem *gpio_intr_en; /* pointer to first intr enable reg */
void __iomem *gpio_intr_stat; /* pointer to first intr status reg */
void __iomem *gpio_intr_type; /* pointer to first intr type reg */
void __iomem *gpio_intr_pol; /* pointer to first intr polarity reg */
void __iomem *gpio_out_en; /* pointer to first output enable reg */
void __iomem *gpio_paddrv; /* pointer to first pad drive reg */
spinlock_t lock;
};
static struct xlp_gpio_priv *gpio_chip_to_xlp_priv(struct gpio_chip *gc)
{
return container_of(gc, struct xlp_gpio_priv, chip);
}
static int xlp_gpio_get_reg(void __iomem *addr, unsigned gpio)
{
u32 pos, regset;
pos = gpio % XLP_GPIO_REGSZ;
regset = (gpio / XLP_GPIO_REGSZ) * 4;
return !!(readl(addr + regset) & BIT(pos));
}
static void xlp_gpio_set_reg(void __iomem *addr, unsigned gpio, int state)
{
u32 value, pos, regset;
pos = gpio % XLP_GPIO_REGSZ;
regset = (gpio / XLP_GPIO_REGSZ) * 4;
value = readl(addr + regset);
if (state)
value |= BIT(pos);
else
value &= ~BIT(pos);
writel(value, addr + regset);
}
static void xlp_gpio_irq_disable(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
unsigned long flags;
spin_lock_irqsave(&priv->lock, flags);
xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0);
__clear_bit(d->hwirq, priv->gpio_enabled_mask);
spin_unlock_irqrestore(&priv->lock, flags);
}
static void xlp_gpio_irq_mask_ack(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
unsigned long flags;
spin_lock_irqsave(&priv->lock, flags);
xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0);
xlp_gpio_set_reg(priv->gpio_intr_stat, d->hwirq, 0x1);
__clear_bit(d->hwirq, priv->gpio_enabled_mask);
spin_unlock_irqrestore(&priv->lock, flags);
}
static void xlp_gpio_irq_unmask(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
unsigned long flags;
spin_lock_irqsave(&priv->lock, flags);
xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x1);
__set_bit(d->hwirq, priv->gpio_enabled_mask);
spin_unlock_irqrestore(&priv->lock, flags);
}
static int xlp_gpio_set_irq_type(struct irq_data *d, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
int pol, irq_type;
switch (type) {
case IRQ_TYPE_EDGE_RISING:
irq_type = XLP_GPIO_IRQ_TYPE_EDGE;
pol = XLP_GPIO_IRQ_POL_HIGH;
break;
case IRQ_TYPE_EDGE_FALLING:
irq_type = XLP_GPIO_IRQ_TYPE_EDGE;
pol = XLP_GPIO_IRQ_POL_LOW;
break;
case IRQ_TYPE_LEVEL_HIGH:
irq_type = XLP_GPIO_IRQ_TYPE_LVL;
pol = XLP_GPIO_IRQ_POL_HIGH;
break;
case IRQ_TYPE_LEVEL_LOW:
irq_type = XLP_GPIO_IRQ_TYPE_LVL;
pol = XLP_GPIO_IRQ_POL_LOW;
break;
default:
return -EINVAL;
}
xlp_gpio_set_reg(priv->gpio_intr_type, d->hwirq, irq_type);
xlp_gpio_set_reg(priv->gpio_intr_pol, d->hwirq, pol);
return 0;
}
static struct irq_chip xlp_gpio_irq_chip = {
.name = "XLP-GPIO",
.irq_mask_ack = xlp_gpio_irq_mask_ack,
.irq_disable = xlp_gpio_irq_disable,
.irq_set_type = xlp_gpio_set_irq_type,
.irq_unmask = xlp_gpio_irq_unmask,
.flags = IRQCHIP_ONESHOT_SAFE,
};
static irqreturn_t xlp_gpio_generic_handler(int irq, void *data)
{
struct xlp_gpio_priv *priv = data;
int gpio, regoff;
u32 gpio_stat;
regoff = -1;
gpio_stat = 0;
for_each_set_bit(gpio, priv->gpio_enabled_mask, XLP_MAX_NR_GPIO) {
if (regoff != gpio / XLP_GPIO_REGSZ) {
regoff = gpio / XLP_GPIO_REGSZ;
gpio_stat = readl(priv->gpio_intr_stat + regoff * 4);
}
if (gpio_stat & BIT(gpio % XLP_GPIO_REGSZ))
generic_handle_irq(irq_find_mapping(
priv->chip.irqdomain, gpio));
}
return IRQ_HANDLED;
}
static int xlp_gpio_dir_output(struct gpio_chip *gc, unsigned gpio, int state)
{
struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
BUG_ON(gpio >= gc->ngpio);
xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x1);
return 0;
}
static int xlp_gpio_dir_input(struct gpio_chip *gc, unsigned gpio)
{
struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
BUG_ON(gpio >= gc->ngpio);
xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x0);
return 0;
}
static int xlp_gpio_get(struct gpio_chip *gc, unsigned gpio)
{
struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
BUG_ON(gpio >= gc->ngpio);
return xlp_gpio_get_reg(priv->gpio_paddrv, gpio);
}
static void xlp_gpio_set(struct gpio_chip *gc, unsigned gpio, int state)
{
struct xlp_gpio_priv *priv = gpio_chip_to_xlp_priv(gc);
BUG_ON(gpio >= gc->ngpio);
xlp_gpio_set_reg(priv->gpio_paddrv, gpio, state);
}
static const struct of_device_id xlp_gpio_of_ids[] = {
{
.compatible = "netlogic,xlp832-gpio",
.data = (void *)XLP_GPIO_VARIANT_XLP832,
},
{
.compatible = "netlogic,xlp316-gpio",
.data = (void *)XLP_GPIO_VARIANT_XLP316,
},
{
.compatible = "netlogic,xlp208-gpio",
.data = (void *)XLP_GPIO_VARIANT_XLP208,
},
{
.compatible = "netlogic,xlp980-gpio",
.data = (void *)XLP_GPIO_VARIANT_XLP980,
},
{
.compatible = "netlogic,xlp532-gpio",
.data = (void *)XLP_GPIO_VARIANT_XLP532,
},
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, xlp_gpio_of_ids);
static int xlp_gpio_probe(struct platform_device *pdev)
{
struct gpio_chip *gc;
struct resource *iores;
struct xlp_gpio_priv *priv;
const struct of_device_id *of_id;
void __iomem *gpio_base;
int irq_base, irq, err;
int ngpio;
u32 soc_type;
iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!iores)
return -ENODEV;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
gpio_base = devm_ioremap_resource(&pdev->dev, iores);
if (IS_ERR(gpio_base))
return PTR_ERR(gpio_base);
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
of_id = of_match_device(xlp_gpio_of_ids, &pdev->dev);
if (!of_id) {
dev_err(&pdev->dev, "Failed to get soc type!\n");
return -ENODEV;
}
soc_type = (uintptr_t) of_id->data;
switch (soc_type) {
case XLP_GPIO_VARIANT_XLP832:
priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN;
priv->gpio_paddrv = gpio_base + GPIO_PADDRV;
priv->gpio_intr_stat = gpio_base + GPIO_INT_STAT;
priv->gpio_intr_type = gpio_base + GPIO_INT_TYPE;
priv->gpio_intr_pol = gpio_base + GPIO_INT_POL;
priv->gpio_intr_en = gpio_base + GPIO_INT_EN00;
ngpio = 41;
break;
case XLP_GPIO_VARIANT_XLP208:
case XLP_GPIO_VARIANT_XLP316:
priv->gpio_out_en = gpio_base + GPIO_OUTPUT_EN;
priv->gpio_paddrv = gpio_base + GPIO_PADDRV;
priv->gpio_intr_stat = gpio_base + GPIO_3XX_INT_STAT;
priv->gpio_intr_type = gpio_base + GPIO_3XX_INT_TYPE;
priv->gpio_intr_pol = gpio_base + GPIO_3XX_INT_POL;
priv->gpio_intr_en = gpio_base + GPIO_3XX_INT_EN00;
ngpio = (soc_type == XLP_GPIO_VARIANT_XLP208) ? 42 : 57;
break;
case XLP_GPIO_VARIANT_XLP980:
case XLP_GPIO_VARIANT_XLP532:
priv->gpio_out_en = gpio_base + GPIO_9XX_OUTPUT_EN;
priv->gpio_paddrv = gpio_base + GPIO_9XX_PADDRV;
priv->gpio_intr_stat = gpio_base + GPIO_9XX_INT_STAT;
priv->gpio_intr_type = gpio_base + GPIO_9XX_INT_TYPE;
priv->gpio_intr_pol = gpio_base + GPIO_9XX_INT_POL;
priv->gpio_intr_en = gpio_base + GPIO_9XX_INT_EN00;
ngpio = (soc_type == XLP_GPIO_VARIANT_XLP980) ? 66 : 67;
break;
default:
dev_err(&pdev->dev, "Unknown Processor type!\n");
return -ENODEV;
}
bitmap_zero(priv->gpio_enabled_mask, XLP_MAX_NR_GPIO);
gc = &priv->chip;
gc->owner = THIS_MODULE;
gc->label = dev_name(&pdev->dev);
gc->base = 0;
gc->dev = &pdev->dev;
gc->ngpio = ngpio;
gc->of_node = pdev->dev.of_node;
gc->direction_output = xlp_gpio_dir_output;
gc->direction_input = xlp_gpio_dir_input;
gc->set = xlp_gpio_set;
gc->get = xlp_gpio_get;
spin_lock_init(&priv->lock);
err = devm_request_irq(&pdev->dev, irq, xlp_gpio_generic_handler,
IRQ_TYPE_NONE, pdev->name, priv);
if (err)
return err;
irq_base = irq_alloc_descs(-1, XLP_GPIO_IRQ_BASE, gc->ngpio, 0);
if (irq_base < 0) {
dev_err(&pdev->dev, "Failed to allocate IRQ numbers\n");
return -ENODEV;
}
err = gpiochip_add(gc);
if (err < 0)
goto out_free_desc;
err = gpiochip_irqchip_add(gc, &xlp_gpio_irq_chip, irq_base,
handle_level_irq, IRQ_TYPE_NONE);
if (err) {
dev_err(&pdev->dev, "Could not connect irqchip to gpiochip!\n");
goto out_gpio_remove;
}
dev_info(&pdev->dev, "registered %d GPIOs\n", gc->ngpio);
return 0;
out_gpio_remove:
gpiochip_remove(gc);
out_free_desc:
irq_free_descs(irq_base, gc->ngpio);
return err;
}
static struct platform_driver xlp_gpio_driver = {
.driver = {
.name = "xlp-gpio",
.of_match_table = xlp_gpio_of_ids,
},
.probe = xlp_gpio_probe,
};
module_platform_driver(xlp_gpio_driver);
MODULE_AUTHOR("Kamlakant Patel <kamlakant.patel@broadcom.com>");
MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@broadcom.com>");
MODULE_DESCRIPTION("Netlogic XLP GPIO Driver");
MODULE_LICENSE("GPL v2");