mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-29 15:43:59 +08:00
3126c7bc41
Add a dummy clk definition for the APB pclk signal on all platforms using the AMBA bus infrastructure. This ensures that these platforms continue to work when the core amba bus code controls the APB pclk. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
374 lines
11 KiB
C
374 lines
11 KiB
C
/*
|
|
* derived from linux/arch/arm/mach-versatile/core.c
|
|
* linux/arch/arm/mach-bcmring/core.c
|
|
*
|
|
* Copyright (C) 1999 - 2003 ARM Limited
|
|
* Copyright (C) 2000 Deep Blue Solutions Ltd
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
/* Portions copyright Broadcom 2008 */
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/sysdev.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/amba/bus.h>
|
|
#include <linux/clocksource.h>
|
|
#include <linux/clockchips.h>
|
|
|
|
#include <mach/csp/mm_addr.h>
|
|
#include <mach/hardware.h>
|
|
#include <asm/clkdev.h>
|
|
#include <linux/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/hardware/arm_timer.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/flash.h>
|
|
#include <asm/mach/irq.h>
|
|
#include <asm/mach/time.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <cfg_global.h>
|
|
|
|
#include "clock.h"
|
|
|
|
#include <csp/secHw.h>
|
|
#include <mach/csp/secHw_def.h>
|
|
#include <mach/csp/chipcHw_inline.h>
|
|
#include <mach/csp/tmrHw_reg.h>
|
|
|
|
#define AMBA_DEVICE(name, initname, base, plat, size) \
|
|
static struct amba_device name##_device = { \
|
|
.dev = { \
|
|
.coherent_dma_mask = ~0, \
|
|
.init_name = initname, \
|
|
.platform_data = plat \
|
|
}, \
|
|
.res = { \
|
|
.start = MM_ADDR_IO_##base, \
|
|
.end = MM_ADDR_IO_##base + (size) - 1, \
|
|
.flags = IORESOURCE_MEM \
|
|
}, \
|
|
.dma_mask = ~0, \
|
|
.irq = { \
|
|
IRQ_##base \
|
|
} \
|
|
}
|
|
|
|
|
|
AMBA_DEVICE(uartA, "uarta", UARTA, NULL, SZ_4K);
|
|
AMBA_DEVICE(uartB, "uartb", UARTB, NULL, SZ_4K);
|
|
|
|
static struct clk pll1_clk = {
|
|
.name = "PLL1",
|
|
.type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL1,
|
|
.rate_hz = 2000000000,
|
|
.use_cnt = 7,
|
|
};
|
|
|
|
static struct clk uart_clk = {
|
|
.name = "UART",
|
|
.type = CLK_TYPE_PROGRAMMABLE,
|
|
.csp_id = chipcHw_CLOCK_UART,
|
|
.rate_hz = HW_CFG_UART_CLK_HZ,
|
|
.parent = &pll1_clk,
|
|
};
|
|
|
|
static struct clk dummy_apb_pclk = {
|
|
.name = "BUSCLK",
|
|
.type = CLK_TYPE_PRIMARY,
|
|
.mode = CLK_MODE_XTAL,
|
|
};
|
|
|
|
static struct clk_lookup lookups[] = {
|
|
{ /* Bus clock */
|
|
.con_id = "apb_pclk",
|
|
.clk = &dummy_apb_pclk,
|
|
}, { /* UART0 */
|
|
.dev_id = "uarta",
|
|
.clk = &uart_clk,
|
|
}, { /* UART1 */
|
|
.dev_id = "uartb",
|
|
.clk = &uart_clk,
|
|
}
|
|
};
|
|
|
|
static struct amba_device *amba_devs[] __initdata = {
|
|
&uartA_device,
|
|
&uartB_device,
|
|
};
|
|
|
|
void __init bcmring_amba_init(void)
|
|
{
|
|
int i;
|
|
u32 bus_clock;
|
|
|
|
/* Linux is run initially in non-secure mode. Secure peripherals */
|
|
/* generate FIQ, and must be handled in secure mode. Until we have */
|
|
/* a linux security monitor implementation, keep everything in */
|
|
/* non-secure mode. */
|
|
chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_SPU);
|
|
secHw_setUnsecure(secHw_BLK_MASK_CHIP_CONTROL |
|
|
secHw_BLK_MASK_KEY_SCAN |
|
|
secHw_BLK_MASK_TOUCH_SCREEN |
|
|
secHw_BLK_MASK_UART0 |
|
|
secHw_BLK_MASK_UART1 |
|
|
secHw_BLK_MASK_WATCHDOG |
|
|
secHw_BLK_MASK_SPUM |
|
|
secHw_BLK_MASK_DDR2 |
|
|
secHw_BLK_MASK_SPU |
|
|
secHw_BLK_MASK_PKA |
|
|
secHw_BLK_MASK_RNG |
|
|
secHw_BLK_MASK_RTC |
|
|
secHw_BLK_MASK_OTP |
|
|
secHw_BLK_MASK_BOOT |
|
|
secHw_BLK_MASK_MPU |
|
|
secHw_BLK_MASK_TZCTRL | secHw_BLK_MASK_INTR);
|
|
|
|
/* Only the devices attached to the AMBA bus are enabled just before the bus is */
|
|
/* scanned and the drivers are loaded. The clocks need to be on for the AMBA bus */
|
|
/* driver to access these blocks. The bus is probed, and the drivers are loaded. */
|
|
/* FIXME Need to remove enable of PIF once CLCD clock enable used properly in FPGA. */
|
|
bus_clock = chipcHw_REG_BUS_CLOCK_GE
|
|
| chipcHw_REG_BUS_CLOCK_SDIO0 | chipcHw_REG_BUS_CLOCK_SDIO1;
|
|
|
|
chipcHw_busInterfaceClockEnable(bus_clock);
|
|
|
|
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
|
|
|
|
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
|
|
struct amba_device *d = amba_devs[i];
|
|
amba_device_register(d, &iomem_resource);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Where is the timer (VA)?
|
|
*/
|
|
#define TIMER0_VA_BASE MM_IO_BASE_TMR
|
|
#define TIMER1_VA_BASE (MM_IO_BASE_TMR + 0x20)
|
|
#define TIMER2_VA_BASE (MM_IO_BASE_TMR + 0x40)
|
|
#define TIMER3_VA_BASE (MM_IO_BASE_TMR + 0x60)
|
|
|
|
/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically 150-166 MHz */
|
|
#if defined(CONFIG_ARCH_FPGA11107)
|
|
/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */
|
|
/* slow down Linux's sense of time */
|
|
#define TIMER0_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30)
|
|
#define TIMER1_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30)
|
|
#define TIMER3_FREQUENCY_MHZ (tmrHw_HIGH_FREQUENCY_MHZ * 30)
|
|
#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30)
|
|
#else
|
|
#define TIMER0_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ
|
|
#define TIMER1_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ
|
|
#define TIMER3_FREQUENCY_MHZ tmrHw_HIGH_FREQUENCY_MHZ
|
|
#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000)
|
|
#endif
|
|
|
|
#define TICKS_PER_uSEC TIMER0_FREQUENCY_MHZ
|
|
|
|
/*
|
|
* These are useconds NOT ticks.
|
|
*
|
|
*/
|
|
#define mSEC_1 1000
|
|
#define mSEC_5 (mSEC_1 * 5)
|
|
#define mSEC_10 (mSEC_1 * 10)
|
|
#define mSEC_25 (mSEC_1 * 25)
|
|
#define SEC_1 (mSEC_1 * 1000)
|
|
|
|
/*
|
|
* How long is the timer interval?
|
|
*/
|
|
#define TIMER_INTERVAL (TICKS_PER_uSEC * mSEC_10)
|
|
#if TIMER_INTERVAL >= 0x100000
|
|
#define TIMER_RELOAD (TIMER_INTERVAL >> 8)
|
|
#define TIMER_DIVISOR (TIMER_CTRL_DIV256)
|
|
#define TICKS2USECS(x) (256 * (x) / TICKS_PER_uSEC)
|
|
#elif TIMER_INTERVAL >= 0x10000
|
|
#define TIMER_RELOAD (TIMER_INTERVAL >> 4) /* Divide by 16 */
|
|
#define TIMER_DIVISOR (TIMER_CTRL_DIV16)
|
|
#define TICKS2USECS(x) (16 * (x) / TICKS_PER_uSEC)
|
|
#else
|
|
#define TIMER_RELOAD (TIMER_INTERVAL)
|
|
#define TIMER_DIVISOR (TIMER_CTRL_DIV1)
|
|
#define TICKS2USECS(x) ((x) / TICKS_PER_uSEC)
|
|
#endif
|
|
|
|
static void timer_set_mode(enum clock_event_mode mode,
|
|
struct clock_event_device *clk)
|
|
{
|
|
unsigned long ctrl;
|
|
|
|
switch (mode) {
|
|
case CLOCK_EVT_MODE_PERIODIC:
|
|
writel(TIMER_RELOAD, TIMER0_VA_BASE + TIMER_LOAD);
|
|
|
|
ctrl = TIMER_CTRL_PERIODIC;
|
|
ctrl |=
|
|
TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE |
|
|
TIMER_CTRL_ENABLE;
|
|
break;
|
|
case CLOCK_EVT_MODE_ONESHOT:
|
|
/* period set, and timer enabled in 'next_event' hook */
|
|
ctrl = TIMER_CTRL_ONESHOT;
|
|
ctrl |= TIMER_DIVISOR | TIMER_CTRL_32BIT | TIMER_CTRL_IE;
|
|
break;
|
|
case CLOCK_EVT_MODE_UNUSED:
|
|
case CLOCK_EVT_MODE_SHUTDOWN:
|
|
default:
|
|
ctrl = 0;
|
|
}
|
|
|
|
writel(ctrl, TIMER0_VA_BASE + TIMER_CTRL);
|
|
}
|
|
|
|
static int timer_set_next_event(unsigned long evt,
|
|
struct clock_event_device *unused)
|
|
{
|
|
unsigned long ctrl = readl(TIMER0_VA_BASE + TIMER_CTRL);
|
|
|
|
writel(evt, TIMER0_VA_BASE + TIMER_LOAD);
|
|
writel(ctrl | TIMER_CTRL_ENABLE, TIMER0_VA_BASE + TIMER_CTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct clock_event_device timer0_clockevent = {
|
|
.name = "timer0",
|
|
.shift = 32,
|
|
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
|
|
.set_mode = timer_set_mode,
|
|
.set_next_event = timer_set_next_event,
|
|
};
|
|
|
|
/*
|
|
* IRQ handler for the timer
|
|
*/
|
|
static irqreturn_t bcmring_timer_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct clock_event_device *evt = &timer0_clockevent;
|
|
|
|
writel(1, TIMER0_VA_BASE + TIMER_INTCLR);
|
|
|
|
evt->event_handler(evt);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct irqaction bcmring_timer_irq = {
|
|
.name = "bcmring Timer Tick",
|
|
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
|
|
.handler = bcmring_timer_interrupt,
|
|
};
|
|
|
|
static cycle_t bcmring_get_cycles_timer1(struct clocksource *cs)
|
|
{
|
|
return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
|
|
}
|
|
|
|
static cycle_t bcmring_get_cycles_timer3(struct clocksource *cs)
|
|
{
|
|
return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
|
|
}
|
|
|
|
static struct clocksource clocksource_bcmring_timer1 = {
|
|
.name = "timer1",
|
|
.rating = 200,
|
|
.read = bcmring_get_cycles_timer1,
|
|
.mask = CLOCKSOURCE_MASK(32),
|
|
.shift = 20,
|
|
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
|
};
|
|
|
|
static struct clocksource clocksource_bcmring_timer3 = {
|
|
.name = "timer3",
|
|
.rating = 100,
|
|
.read = bcmring_get_cycles_timer3,
|
|
.mask = CLOCKSOURCE_MASK(32),
|
|
.shift = 20,
|
|
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
|
};
|
|
|
|
static int __init bcmring_clocksource_init(void)
|
|
{
|
|
/* setup timer1 as free-running clocksource */
|
|
writel(0, TIMER1_VA_BASE + TIMER_CTRL);
|
|
writel(0xffffffff, TIMER1_VA_BASE + TIMER_LOAD);
|
|
writel(0xffffffff, TIMER1_VA_BASE + TIMER_VALUE);
|
|
writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
|
|
TIMER1_VA_BASE + TIMER_CTRL);
|
|
|
|
clocksource_bcmring_timer1.mult =
|
|
clocksource_khz2mult(TIMER1_FREQUENCY_MHZ * 1000,
|
|
clocksource_bcmring_timer1.shift);
|
|
clocksource_register(&clocksource_bcmring_timer1);
|
|
|
|
/* setup timer3 as free-running clocksource */
|
|
writel(0, TIMER3_VA_BASE + TIMER_CTRL);
|
|
writel(0xffffffff, TIMER3_VA_BASE + TIMER_LOAD);
|
|
writel(0xffffffff, TIMER3_VA_BASE + TIMER_VALUE);
|
|
writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
|
|
TIMER3_VA_BASE + TIMER_CTRL);
|
|
|
|
clocksource_bcmring_timer3.mult =
|
|
clocksource_khz2mult(TIMER3_FREQUENCY_KHZ,
|
|
clocksource_bcmring_timer3.shift);
|
|
clocksource_register(&clocksource_bcmring_timer3);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set up timer interrupt, and return the current time in seconds.
|
|
*/
|
|
void __init bcmring_init_timer(void)
|
|
{
|
|
printk(KERN_INFO "bcmring_init_timer\n");
|
|
/*
|
|
* Initialise to a known state (all timers off)
|
|
*/
|
|
writel(0, TIMER0_VA_BASE + TIMER_CTRL);
|
|
writel(0, TIMER1_VA_BASE + TIMER_CTRL);
|
|
writel(0, TIMER2_VA_BASE + TIMER_CTRL);
|
|
writel(0, TIMER3_VA_BASE + TIMER_CTRL);
|
|
|
|
/*
|
|
* Make irqs happen for the system timer
|
|
*/
|
|
setup_irq(IRQ_TIMER0, &bcmring_timer_irq);
|
|
|
|
bcmring_clocksource_init();
|
|
|
|
timer0_clockevent.mult =
|
|
div_sc(1000000, NSEC_PER_SEC, timer0_clockevent.shift);
|
|
timer0_clockevent.max_delta_ns =
|
|
clockevent_delta2ns(0xffffffff, &timer0_clockevent);
|
|
timer0_clockevent.min_delta_ns =
|
|
clockevent_delta2ns(0xf, &timer0_clockevent);
|
|
|
|
timer0_clockevent.cpumask = cpumask_of(0);
|
|
clockevents_register_device(&timer0_clockevent);
|
|
}
|
|
|
|
struct sys_timer bcmring_timer = {
|
|
.init = bcmring_init_timer,
|
|
};
|