2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 21:24:00 +08:00
linux-next/drivers/net/wireless/i82586.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

414 lines
14 KiB
C

/*
* Intel 82586 IEEE 802.3 Ethernet LAN Coprocessor.
*
* See:
* Intel Microcommunications 1991
* p1-1 to p1-37
* Intel order No. 231658
* ISBN 1-55512-119-5
*
* Unfortunately, the above chapter mentions neither
* the System Configuration Pointer (SCP) nor the
* Intermediate System Configuration Pointer (ISCP),
* so we probably need to look elsewhere for the
* whole story -- some recommend the "Intel LAN
* Components manual" but I have neither a copy
* nor a full reference. But "elsewhere" may be
* in the same publication...
* The description of a later device, the
* "82596CA High-Performance 32-Bit Local Area Network
* Coprocessor", (ibid. p1-38 to p1-109) does mention
* the SCP and ISCP and also has an i82586 compatibility
* mode. Even more useful is "AP-235 An 82586 Data Link
* Driver" (ibid. p1-337 to p1-417).
*/
#define I82586_MEMZ (64 * 1024)
#define I82586_SCP_ADDR (I82586_MEMZ - sizeof(scp_t))
#define ADDR_LEN 6
#define I82586NULL 0xFFFF
#define toff(t,p,f) (unsigned short)((void *)(&((t *)((void *)0 + (p)))->f) - (void *)0)
/*
* System Configuration Pointer (SCP).
*/
typedef struct scp_t scp_t;
struct scp_t
{
unsigned short scp_sysbus; /* 82586 bus width: */
#define SCP_SY_16BBUS (0x0 << 0) /* 16 bits */
#define SCP_SY_8BBUS (0x1 << 0) /* 8 bits. */
unsigned short scp_junk[2]; /* Unused */
unsigned short scp_iscpl; /* lower 16 bits of ISCP_ADDR */
unsigned short scp_iscph; /* upper 16 bits of ISCP_ADDR */
};
/*
* Intermediate System Configuration Pointer (ISCP).
*/
typedef struct iscp_t iscp_t;
struct iscp_t
{
unsigned short iscp_busy; /* set by CPU before first CA, */
/* cleared by 82586 after read. */
unsigned short iscp_offset; /* offset of SCB */
unsigned short iscp_basel; /* base of SCB */
unsigned short iscp_baseh; /* " */
};
/*
* System Control Block (SCB).
* The 82586 writes its status to scb_status and then
* raises an interrupt to alert the CPU.
* The CPU writes a command to scb_command and
* then issues a Channel Attention (CA) to alert the 82586.
*/
typedef struct scb_t scb_t;
struct scb_t
{
unsigned short scb_status; /* Status of 82586 */
#define SCB_ST_INT (0xF << 12) /* Some of: */
#define SCB_ST_CX (0x1 << 15) /* Cmd completed */
#define SCB_ST_FR (0x1 << 14) /* Frame received */
#define SCB_ST_CNA (0x1 << 13) /* Cmd unit not active */
#define SCB_ST_RNR (0x1 << 12) /* Rcv unit not ready */
#define SCB_ST_JUNK0 (0x1 << 11) /* 0 */
#define SCB_ST_CUS (0x7 << 8) /* Cmd unit status */
#define SCB_ST_CUS_IDLE (0 << 8) /* Idle */
#define SCB_ST_CUS_SUSP (1 << 8) /* Suspended */
#define SCB_ST_CUS_ACTV (2 << 8) /* Active */
#define SCB_ST_JUNK1 (0x1 << 7) /* 0 */
#define SCB_ST_RUS (0x7 << 4) /* Rcv unit status */
#define SCB_ST_RUS_IDLE (0 << 4) /* Idle */
#define SCB_ST_RUS_SUSP (1 << 4) /* Suspended */
#define SCB_ST_RUS_NRES (2 << 4) /* No resources */
#define SCB_ST_RUS_RDY (4 << 4) /* Ready */
unsigned short scb_command; /* Next command */
#define SCB_CMD_ACK_CX (0x1 << 15) /* Ack cmd completion */
#define SCB_CMD_ACK_FR (0x1 << 14) /* Ack frame received */
#define SCB_CMD_ACK_CNA (0x1 << 13) /* Ack CU not active */
#define SCB_CMD_ACK_RNR (0x1 << 12) /* Ack RU not ready */
#define SCB_CMD_JUNKX (0x1 << 11) /* Unused */
#define SCB_CMD_CUC (0x7 << 8) /* Command Unit command */
#define SCB_CMD_CUC_NOP (0 << 8) /* Nop */
#define SCB_CMD_CUC_GO (1 << 8) /* Start cbl_offset */
#define SCB_CMD_CUC_RES (2 << 8) /* Resume execution */
#define SCB_CMD_CUC_SUS (3 << 8) /* Suspend " */
#define SCB_CMD_CUC_ABT (4 << 8) /* Abort " */
#define SCB_CMD_RESET (0x1 << 7) /* Reset chip (hardware) */
#define SCB_CMD_RUC (0x7 << 4) /* Receive Unit command */
#define SCB_CMD_RUC_NOP (0 << 4) /* Nop */
#define SCB_CMD_RUC_GO (1 << 4) /* Start rfa_offset */
#define SCB_CMD_RUC_RES (2 << 4) /* Resume reception */
#define SCB_CMD_RUC_SUS (3 << 4) /* Suspend " */
#define SCB_CMD_RUC_ABT (4 << 4) /* Abort " */
unsigned short scb_cbl_offset; /* Offset of first command unit */
/* Action Command */
unsigned short scb_rfa_offset; /* Offset of first Receive */
/* Frame Descriptor in the */
/* Receive Frame Area */
unsigned short scb_crcerrs; /* Properly aligned frames */
/* received with a CRC error */
unsigned short scb_alnerrs; /* Misaligned frames received */
/* with a CRC error */
unsigned short scb_rscerrs; /* Frames lost due to no space */
unsigned short scb_ovrnerrs; /* Frames lost due to slow bus */
};
#define scboff(p,f) toff(scb_t, p, f)
/*
* The eight Action Commands.
*/
typedef enum acmd_e acmd_e;
enum acmd_e
{
acmd_nop = 0, /* Do nothing */
acmd_ia_setup = 1, /* Load an (ethernet) address into the */
/* 82586 */
acmd_configure = 2, /* Update the 82586 operating parameters */
acmd_mc_setup = 3, /* Load a list of (ethernet) multicast */
/* addresses into the 82586 */
acmd_transmit = 4, /* Transmit a frame */
acmd_tdr = 5, /* Perform a Time Domain Reflectometer */
/* test on the serial link */
acmd_dump = 6, /* Copy 82586 registers to memory */
acmd_diagnose = 7, /* Run an internal self test */
};
/*
* Generic Action Command header.
*/
typedef struct ach_t ach_t;
struct ach_t
{
unsigned short ac_status; /* Command status: */
#define AC_SFLD_C (0x1 << 15) /* Command completed */
#define AC_SFLD_B (0x1 << 14) /* Busy executing */
#define AC_SFLD_OK (0x1 << 13) /* Completed error free */
#define AC_SFLD_A (0x1 << 12) /* Command aborted */
#define AC_SFLD_FAIL (0x1 << 11) /* Selftest failed */
#define AC_SFLD_S10 (0x1 << 10) /* No carrier sense */
/* during transmission */
#define AC_SFLD_S9 (0x1 << 9) /* Tx unsuccessful: */
/* (stopped) lost CTS */
#define AC_SFLD_S8 (0x1 << 8) /* Tx unsuccessful: */
/* (stopped) slow DMA */
#define AC_SFLD_S7 (0x1 << 7) /* Tx deferred: */
/* other link traffic */
#define AC_SFLD_S6 (0x1 << 6) /* Heart Beat: collision */
/* detect after last tx */
#define AC_SFLD_S5 (0x1 << 5) /* Tx stopped: */
/* excessive collisions */
#define AC_SFLD_MAXCOL (0xF << 0) /* Collision count */
unsigned short ac_command; /* Command specifier: */
#define AC_CFLD_EL (0x1 << 15) /* End of command list */
#define AC_CFLD_S (0x1 << 14) /* Suspend on completion */
#define AC_CFLD_I (0x1 << 13) /* Interrupt on completion */
#define AC_CFLD_CMD (0x7 << 0) /* acmd_e */
unsigned short ac_link; /* Next Action Command */
};
#define acoff(p,f) toff(ach_t, p, f)
/*
* The Nop Action Command.
*/
typedef struct ac_nop_t ac_nop_t;
struct ac_nop_t
{
ach_t nop_h;
};
/*
* The IA-Setup Action Command.
*/
typedef struct ac_ias_t ac_ias_t;
struct ac_ias_t
{
ach_t ias_h;
unsigned char ias_addr[ADDR_LEN]; /* The (ethernet) address */
};
/*
* The Configure Action Command.
*/
typedef struct ac_cfg_t ac_cfg_t;
struct ac_cfg_t
{
ach_t cfg_h;
unsigned char cfg_byte_cnt; /* Size foll data: 4-12 */
#define AC_CFG_BYTE_CNT(v) (((v) & 0xF) << 0)
unsigned char cfg_fifolim; /* FIFO threshold */
#define AC_CFG_FIFOLIM(v) (((v) & 0xF) << 0)
unsigned char cfg_byte8;
#define AC_CFG_SAV_BF(v) (((v) & 0x1) << 7) /* Save rxd bad frames */
#define AC_CFG_SRDY(v) (((v) & 0x1) << 6) /* SRDY/ARDY pin means */
/* external sync. */
unsigned char cfg_byte9;
#define AC_CFG_ELPBCK(v) (((v) & 0x1) << 7) /* External loopback */
#define AC_CFG_ILPBCK(v) (((v) & 0x1) << 6) /* Internal loopback */
#define AC_CFG_PRELEN(v) (((v) & 0x3) << 4) /* Preamble length */
#define AC_CFG_PLEN_2 0 /* 2 bytes */
#define AC_CFG_PLEN_4 1 /* 4 bytes */
#define AC_CFG_PLEN_8 2 /* 8 bytes */
#define AC_CFG_PLEN_16 3 /* 16 bytes */
#define AC_CFG_ALOC(v) (((v) & 0x1) << 3) /* Addr/len data is */
/* explicit in buffers */
#define AC_CFG_ADDRLEN(v) (((v) & 0x7) << 0) /* Bytes per address */
unsigned char cfg_byte10;
#define AC_CFG_BOFMET(v) (((v) & 0x1) << 7) /* Use alternate expo. */
/* backoff method */
#define AC_CFG_ACR(v) (((v) & 0x7) << 4) /* Accelerated cont. res. */
#define AC_CFG_LINPRIO(v) (((v) & 0x7) << 0) /* Linear priority */
unsigned char cfg_ifs; /* Interframe spacing */
unsigned char cfg_slotl; /* Slot time (low byte) */
unsigned char cfg_byte13;
#define AC_CFG_RETRYNUM(v) (((v) & 0xF) << 4) /* Max. collision retry */
#define AC_CFG_SLTTMHI(v) (((v) & 0x7) << 0) /* Slot time (high bits) */
unsigned char cfg_byte14;
#define AC_CFG_FLGPAD(v) (((v) & 0x1) << 7) /* Pad with HDLC flags */
#define AC_CFG_BTSTF(v) (((v) & 0x1) << 6) /* Do HDLC bitstuffing */
#define AC_CFG_CRC16(v) (((v) & 0x1) << 5) /* 16 bit CCITT CRC */
#define AC_CFG_NCRC(v) (((v) & 0x1) << 4) /* Insert no CRC */
#define AC_CFG_TNCRS(v) (((v) & 0x1) << 3) /* Tx even if no carrier */
#define AC_CFG_MANCH(v) (((v) & 0x1) << 2) /* Manchester coding */
#define AC_CFG_BCDIS(v) (((v) & 0x1) << 1) /* Disable broadcast */
#define AC_CFG_PRM(v) (((v) & 0x1) << 0) /* Promiscuous mode */
unsigned char cfg_byte15;
#define AC_CFG_ICDS(v) (((v) & 0x1) << 7) /* Internal collision */
/* detect source */
#define AC_CFG_CDTF(v) (((v) & 0x7) << 4) /* Collision detect */
/* filter in bit times */
#define AC_CFG_ICSS(v) (((v) & 0x1) << 3) /* Internal carrier */
/* sense source */
#define AC_CFG_CSTF(v) (((v) & 0x7) << 0) /* Carrier sense */
/* filter in bit times */
unsigned short cfg_min_frm_len;
#define AC_CFG_MNFRM(v) (((v) & 0xFF) << 0) /* Min. bytes/frame (<= 255) */
};
/*
* The MC-Setup Action Command.
*/
typedef struct ac_mcs_t ac_mcs_t;
struct ac_mcs_t
{
ach_t mcs_h;
unsigned short mcs_cnt; /* No. of bytes of MC addresses */
#if 0
unsigned char mcs_data[ADDR_LEN]; /* The first MC address .. */
...
#endif
};
#define I82586_MAX_MULTICAST_ADDRESSES 128 /* Hardware hashed filter */
/*
* The Transmit Action Command.
*/
typedef struct ac_tx_t ac_tx_t;
struct ac_tx_t
{
ach_t tx_h;
unsigned short tx_tbd_offset; /* Address of list of buffers. */
#if 0
Linux packets are passed down with the destination MAC address
and length/type field already prepended to the data,
so we do not need to insert it. Consistent with this
we must also set the AC_CFG_ALOC(..) flag during the
ac_cfg_t action command.
unsigned char tx_addr[ADDR_LEN]; /* The frame dest. address */
unsigned short tx_length; /* The frame length */
#endif /* 0 */
};
/*
* The Time Domain Reflectometer Action Command.
*/
typedef struct ac_tdr_t ac_tdr_t;
struct ac_tdr_t
{
ach_t tdr_h;
unsigned short tdr_result; /* Result. */
#define AC_TDR_LNK_OK (0x1 << 15) /* No link problem */
#define AC_TDR_XCVR_PRB (0x1 << 14) /* Txcvr cable problem */
#define AC_TDR_ET_OPN (0x1 << 13) /* Open on the link */
#define AC_TDR_ET_SRT (0x1 << 12) /* Short on the link */
#define AC_TDR_TIME (0x7FF << 0) /* Distance to problem */
/* site in transmit */
/* clock cycles */
};
/*
* The Dump Action Command.
*/
typedef struct ac_dmp_t ac_dmp_t;
struct ac_dmp_t
{
ach_t dmp_h;
unsigned short dmp_offset; /* Result. */
};
/*
* Size of the result of the dump command.
*/
#define DUMPBYTES 170
/*
* The Diagnose Action Command.
*/
typedef struct ac_dgn_t ac_dgn_t;
struct ac_dgn_t
{
ach_t dgn_h;
};
/*
* Transmit Buffer Descriptor (TBD).
*/
typedef struct tbd_t tbd_t;
struct tbd_t
{
unsigned short tbd_status; /* Written by the CPU */
#define TBD_STATUS_EOF (0x1 << 15) /* This TBD is the */
/* last for this frame */
#define TBD_STATUS_ACNT (0x3FFF << 0) /* Actual count of data */
/* bytes in this buffer */
unsigned short tbd_next_bd_offset; /* Next in list */
unsigned short tbd_bufl; /* Buffer address (low) */
unsigned short tbd_bufh; /* " " (high) */
};
/*
* Receive Buffer Descriptor (RBD).
*/
typedef struct rbd_t rbd_t;
struct rbd_t
{
unsigned short rbd_status; /* Written by the 82586 */
#define RBD_STATUS_EOF (0x1 << 15) /* This RBD is the */
/* last for this frame */
#define RBD_STATUS_F (0x1 << 14) /* ACNT field is valid */
#define RBD_STATUS_ACNT (0x3FFF << 0) /* Actual no. of data */
/* bytes in this buffer */
unsigned short rbd_next_rbd_offset; /* Next rbd in list */
unsigned short rbd_bufl; /* Data pointer (low) */
unsigned short rbd_bufh; /* " " (high) */
unsigned short rbd_el_size; /* EL+Data buf. size */
#define RBD_EL (0x1 << 15) /* This BD is the */
/* last in the list */
#define RBD_SIZE (0x3FFF << 0) /* No. of bytes the */
/* buffer can hold */
};
#define rbdoff(p,f) toff(rbd_t, p, f)
/*
* Frame Descriptor (FD).
*/
typedef struct fd_t fd_t;
struct fd_t
{
unsigned short fd_status; /* Written by the 82586 */
#define FD_STATUS_C (0x1 << 15) /* Completed storing frame */
#define FD_STATUS_B (0x1 << 14) /* FD was consumed by RU */
#define FD_STATUS_OK (0x1 << 13) /* Frame rxd successfully */
#define FD_STATUS_S11 (0x1 << 11) /* CRC error */
#define FD_STATUS_S10 (0x1 << 10) /* Alignment error */
#define FD_STATUS_S9 (0x1 << 9) /* Ran out of resources */
#define FD_STATUS_S8 (0x1 << 8) /* Rx DMA overrun */
#define FD_STATUS_S7 (0x1 << 7) /* Frame too short */
#define FD_STATUS_S6 (0x1 << 6) /* No EOF flag */
unsigned short fd_command; /* Command */
#define FD_COMMAND_EL (0x1 << 15) /* Last FD in list */
#define FD_COMMAND_S (0x1 << 14) /* Suspend RU after rx */
unsigned short fd_link_offset; /* Next FD */
unsigned short fd_rbd_offset; /* First RBD (data) */
/* Prepared by CPU, */
/* updated by 82586 */
#if 0
I think the rest is unused since we
have set AC_CFG_ALOC(..). However, just
in case, we leave the space.
#endif /* 0 */
unsigned char fd_dest[ADDR_LEN]; /* Destination address */
/* Written by 82586 */
unsigned char fd_src[ADDR_LEN]; /* Source address */
/* Written by 82586 */
unsigned short fd_length; /* Frame length or type */
/* Written by 82586 */
};
#define fdoff(p,f) toff(fd_t, p, f)
/*
* This software may only be used and distributed
* according to the terms of the GNU General Public License.
*
* For more details, see wavelan.c.
*/