mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-02 02:14:01 +08:00
7407188489
The additional brakects added to tpm_set_next_event's return value
computation causes (int) forced type conversion NOT taking effect, and the
incorrect value return will cause various system timer issue, like RCU
stall etc..
Remove the additional brackets to make sure tpm_set_next_event always
returns correct value.
Fixes: 059ab7b82e
("clocksource/drivers/imx-tpm: Add imx tpm timer support")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Dong Aisheng <Aisheng.dong@nxp.com>
Cc: stable@vger.kernel.org
Cc: daniel.lezcano@linaro.org
Cc: Linux-imx@nxp.com
Link: https://lkml.kernel.org/r/1524117883-2484-1-git-send-email-Anson.Huang@nxp.com
263 lines
6.3 KiB
C
263 lines
6.3 KiB
C
/*
|
|
* Copyright 2016 Freescale Semiconductor, Inc.
|
|
* Copyright 2017 NXP
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clockchips.h>
|
|
#include <linux/clocksource.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/sched_clock.h>
|
|
|
|
#define TPM_PARAM 0x4
|
|
#define TPM_PARAM_WIDTH_SHIFT 16
|
|
#define TPM_PARAM_WIDTH_MASK (0xff << 16)
|
|
#define TPM_SC 0x10
|
|
#define TPM_SC_CMOD_INC_PER_CNT (0x1 << 3)
|
|
#define TPM_SC_CMOD_DIV_DEFAULT 0x3
|
|
#define TPM_SC_CMOD_DIV_MAX 0x7
|
|
#define TPM_SC_TOF_MASK (0x1 << 7)
|
|
#define TPM_CNT 0x14
|
|
#define TPM_MOD 0x18
|
|
#define TPM_STATUS 0x1c
|
|
#define TPM_STATUS_CH0F BIT(0)
|
|
#define TPM_C0SC 0x20
|
|
#define TPM_C0SC_CHIE BIT(6)
|
|
#define TPM_C0SC_MODE_SHIFT 2
|
|
#define TPM_C0SC_MODE_MASK 0x3c
|
|
#define TPM_C0SC_MODE_SW_COMPARE 0x4
|
|
#define TPM_C0SC_CHF_MASK (0x1 << 7)
|
|
#define TPM_C0V 0x24
|
|
|
|
static int counter_width;
|
|
static int rating;
|
|
static void __iomem *timer_base;
|
|
static struct clock_event_device clockevent_tpm;
|
|
|
|
static inline void tpm_timer_disable(void)
|
|
{
|
|
unsigned int val;
|
|
|
|
/* channel disable */
|
|
val = readl(timer_base + TPM_C0SC);
|
|
val &= ~(TPM_C0SC_MODE_MASK | TPM_C0SC_CHIE);
|
|
writel(val, timer_base + TPM_C0SC);
|
|
}
|
|
|
|
static inline void tpm_timer_enable(void)
|
|
{
|
|
unsigned int val;
|
|
|
|
/* channel enabled in sw compare mode */
|
|
val = readl(timer_base + TPM_C0SC);
|
|
val |= (TPM_C0SC_MODE_SW_COMPARE << TPM_C0SC_MODE_SHIFT) |
|
|
TPM_C0SC_CHIE;
|
|
writel(val, timer_base + TPM_C0SC);
|
|
}
|
|
|
|
static inline void tpm_irq_acknowledge(void)
|
|
{
|
|
writel(TPM_STATUS_CH0F, timer_base + TPM_STATUS);
|
|
}
|
|
|
|
static struct delay_timer tpm_delay_timer;
|
|
|
|
static inline unsigned long tpm_read_counter(void)
|
|
{
|
|
return readl(timer_base + TPM_CNT);
|
|
}
|
|
|
|
static unsigned long tpm_read_current_timer(void)
|
|
{
|
|
return tpm_read_counter();
|
|
}
|
|
|
|
static u64 notrace tpm_read_sched_clock(void)
|
|
{
|
|
return tpm_read_counter();
|
|
}
|
|
|
|
static int __init tpm_clocksource_init(unsigned long rate)
|
|
{
|
|
tpm_delay_timer.read_current_timer = &tpm_read_current_timer;
|
|
tpm_delay_timer.freq = rate;
|
|
register_current_timer_delay(&tpm_delay_timer);
|
|
|
|
sched_clock_register(tpm_read_sched_clock, counter_width, rate);
|
|
|
|
return clocksource_mmio_init(timer_base + TPM_CNT, "imx-tpm",
|
|
rate, rating, counter_width,
|
|
clocksource_mmio_readl_up);
|
|
}
|
|
|
|
static int tpm_set_next_event(unsigned long delta,
|
|
struct clock_event_device *evt)
|
|
{
|
|
unsigned long next, now;
|
|
|
|
next = tpm_read_counter();
|
|
next += delta;
|
|
writel(next, timer_base + TPM_C0V);
|
|
now = tpm_read_counter();
|
|
|
|
/*
|
|
* NOTE: We observed in a very small probability, the bus fabric
|
|
* contention between GPU and A7 may results a few cycles delay
|
|
* of writing CNT registers which may cause the min_delta event got
|
|
* missed, so we need add a ETIME check here in case it happened.
|
|
*/
|
|
return (int)(next - now) <= 0 ? -ETIME : 0;
|
|
}
|
|
|
|
static int tpm_set_state_oneshot(struct clock_event_device *evt)
|
|
{
|
|
tpm_timer_enable();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tpm_set_state_shutdown(struct clock_event_device *evt)
|
|
{
|
|
tpm_timer_disable();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t tpm_timer_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct clock_event_device *evt = dev_id;
|
|
|
|
tpm_irq_acknowledge();
|
|
|
|
evt->event_handler(evt);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct clock_event_device clockevent_tpm = {
|
|
.name = "i.MX7ULP TPM Timer",
|
|
.features = CLOCK_EVT_FEAT_ONESHOT,
|
|
.set_state_oneshot = tpm_set_state_oneshot,
|
|
.set_next_event = tpm_set_next_event,
|
|
.set_state_shutdown = tpm_set_state_shutdown,
|
|
};
|
|
|
|
static int __init tpm_clockevent_init(unsigned long rate, int irq)
|
|
{
|
|
int ret;
|
|
|
|
ret = request_irq(irq, tpm_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL,
|
|
"i.MX7ULP TPM Timer", &clockevent_tpm);
|
|
|
|
clockevent_tpm.rating = rating;
|
|
clockevent_tpm.cpumask = cpumask_of(0);
|
|
clockevent_tpm.irq = irq;
|
|
clockevents_config_and_register(&clockevent_tpm, rate, 300,
|
|
GENMASK(counter_width - 1, 1));
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __init tpm_timer_init(struct device_node *np)
|
|
{
|
|
struct clk *ipg, *per;
|
|
int irq, ret;
|
|
u32 rate;
|
|
|
|
timer_base = of_iomap(np, 0);
|
|
if (!timer_base) {
|
|
pr_err("tpm: failed to get base address\n");
|
|
return -ENXIO;
|
|
}
|
|
|
|
irq = irq_of_parse_and_map(np, 0);
|
|
if (!irq) {
|
|
pr_err("tpm: failed to get irq\n");
|
|
ret = -ENOENT;
|
|
goto err_iomap;
|
|
}
|
|
|
|
ipg = of_clk_get_by_name(np, "ipg");
|
|
per = of_clk_get_by_name(np, "per");
|
|
if (IS_ERR(ipg) || IS_ERR(per)) {
|
|
pr_err("tpm: failed to get ipg or per clk\n");
|
|
ret = -ENODEV;
|
|
goto err_clk_get;
|
|
}
|
|
|
|
/* enable clk before accessing registers */
|
|
ret = clk_prepare_enable(ipg);
|
|
if (ret) {
|
|
pr_err("tpm: ipg clock enable failed (%d)\n", ret);
|
|
goto err_clk_get;
|
|
}
|
|
|
|
ret = clk_prepare_enable(per);
|
|
if (ret) {
|
|
pr_err("tpm: per clock enable failed (%d)\n", ret);
|
|
goto err_per_clk_enable;
|
|
}
|
|
|
|
counter_width = (readl(timer_base + TPM_PARAM) & TPM_PARAM_WIDTH_MASK)
|
|
>> TPM_PARAM_WIDTH_SHIFT;
|
|
/* use rating 200 for 32-bit counter and 150 for 16-bit counter */
|
|
rating = counter_width == 0x20 ? 200 : 150;
|
|
|
|
/*
|
|
* Initialize tpm module to a known state
|
|
* 1) Counter disabled
|
|
* 2) TPM counter operates in up counting mode
|
|
* 3) Timer Overflow Interrupt disabled
|
|
* 4) Channel0 disabled
|
|
* 5) DMA transfers disabled
|
|
*/
|
|
/* make sure counter is disabled */
|
|
writel(0, timer_base + TPM_SC);
|
|
/* TOF is W1C */
|
|
writel(TPM_SC_TOF_MASK, timer_base + TPM_SC);
|
|
writel(0, timer_base + TPM_CNT);
|
|
/* CHF is W1C */
|
|
writel(TPM_C0SC_CHF_MASK, timer_base + TPM_C0SC);
|
|
|
|
/*
|
|
* increase per cnt,
|
|
* div 8 for 32-bit counter and div 128 for 16-bit counter
|
|
*/
|
|
writel(TPM_SC_CMOD_INC_PER_CNT |
|
|
(counter_width == 0x20 ?
|
|
TPM_SC_CMOD_DIV_DEFAULT : TPM_SC_CMOD_DIV_MAX),
|
|
timer_base + TPM_SC);
|
|
|
|
/* set MOD register to maximum for free running mode */
|
|
writel(GENMASK(counter_width - 1, 0), timer_base + TPM_MOD);
|
|
|
|
rate = clk_get_rate(per) >> 3;
|
|
ret = tpm_clocksource_init(rate);
|
|
if (ret)
|
|
goto err_per_clk_enable;
|
|
|
|
ret = tpm_clockevent_init(rate, irq);
|
|
if (ret)
|
|
goto err_per_clk_enable;
|
|
|
|
return 0;
|
|
|
|
err_per_clk_enable:
|
|
clk_disable_unprepare(ipg);
|
|
err_clk_get:
|
|
clk_put(per);
|
|
clk_put(ipg);
|
|
err_iomap:
|
|
iounmap(timer_base);
|
|
return ret;
|
|
}
|
|
TIMER_OF_DECLARE(imx7ulp, "fsl,imx7ulp-tpm", tpm_timer_init);
|