2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-20 03:04:01 +08:00
linux-next/fs/btrfs/delalloc-space.c
Filipe Manana 16ad3be175 Btrfs: remove unnecessary delalloc mutex for inodes
The inode delalloc mutex was added a long time ago by commit f248679e86
("Btrfs: add a delalloc mutex to inodes for delalloc reservations"), and
the reason for its introduction is not very clear from the change log. It
claims it solves bogus warnings from lockdep, however it lacks an example
report/warning from lockdep, or any explanation.

Since we have enough concurrentcy protection from the locks of the space
info and block reserve objects, and such lockdep warnings don't seem to
exist anymore (at least on a 5.3 kernel I couldn't get them with fstests,
ltp, fs_mark, etc), remove it, simplifying things a bit and decreasing
the size of the btrfs_inode structure. With some quick fio tests doing
direct IO and mmap writes I couldn't observe any significant performance
increase either (direct IO writes that don't increase the file's size
don't hold the inode's lock for their entire duration and mmap writes
don't hold the inode's lock at all), which are the only type of writes
that could see any performance gain due to less serialization.

Review feedback from Josef:

The problem was taking the i_mutex in mmap, which is how I was
protecting delalloc reservations originally.  The delalloc mutex didn't
come with all of the other dependencies.  That's what the lockdep
messages were about, removing the lock isn't going to make them appear
again.

We _had_ to lock around this because we used to do tricks to keep from
over-reserving, and if we didn't serialize delalloc reservations we'd
end up with ugly accounting problems when we tried to clean things up.

However with my recentish changes this isn't the case anymore.  Every
operation is responsible for reserving its space, and then adding it to
the inode.  Then cleaning up is straightforward and can't be mucked up
by other users.  So we no longer need the delalloc mutex to safe us from
ourselves.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-18 17:51:46 +01:00

491 lines
15 KiB
C

// SPDX-License-Identifier: GPL-2.0
#include "ctree.h"
#include "delalloc-space.h"
#include "block-rsv.h"
#include "btrfs_inode.h"
#include "space-info.h"
#include "transaction.h"
#include "qgroup.h"
#include "block-group.h"
int btrfs_alloc_data_chunk_ondemand(struct btrfs_inode *inode, u64 bytes)
{
struct btrfs_root *root = inode->root;
struct btrfs_fs_info *fs_info = root->fs_info;
struct btrfs_space_info *data_sinfo = fs_info->data_sinfo;
u64 used;
int ret = 0;
int need_commit = 2;
int have_pinned_space;
/* Make sure bytes are sectorsize aligned */
bytes = ALIGN(bytes, fs_info->sectorsize);
if (btrfs_is_free_space_inode(inode)) {
need_commit = 0;
ASSERT(current->journal_info);
}
again:
/* Make sure we have enough space to handle the data first */
spin_lock(&data_sinfo->lock);
used = btrfs_space_info_used(data_sinfo, true);
if (used + bytes > data_sinfo->total_bytes) {
struct btrfs_trans_handle *trans;
/*
* If we don't have enough free bytes in this space then we need
* to alloc a new chunk.
*/
if (!data_sinfo->full) {
u64 alloc_target;
data_sinfo->force_alloc = CHUNK_ALLOC_FORCE;
spin_unlock(&data_sinfo->lock);
alloc_target = btrfs_data_alloc_profile(fs_info);
/*
* It is ugly that we don't call nolock join
* transaction for the free space inode case here.
* But it is safe because we only do the data space
* reservation for the free space cache in the
* transaction context, the common join transaction
* just increase the counter of the current transaction
* handler, doesn't try to acquire the trans_lock of
* the fs.
*/
trans = btrfs_join_transaction(root);
if (IS_ERR(trans))
return PTR_ERR(trans);
ret = btrfs_chunk_alloc(trans, alloc_target,
CHUNK_ALLOC_NO_FORCE);
btrfs_end_transaction(trans);
if (ret < 0) {
if (ret != -ENOSPC)
return ret;
else {
have_pinned_space = 1;
goto commit_trans;
}
}
goto again;
}
/*
* If we don't have enough pinned space to deal with this
* allocation, and no removed chunk in current transaction,
* don't bother committing the transaction.
*/
have_pinned_space = __percpu_counter_compare(
&data_sinfo->total_bytes_pinned,
used + bytes - data_sinfo->total_bytes,
BTRFS_TOTAL_BYTES_PINNED_BATCH);
spin_unlock(&data_sinfo->lock);
/* Commit the current transaction and try again */
commit_trans:
if (need_commit) {
need_commit--;
if (need_commit > 0) {
btrfs_start_delalloc_roots(fs_info, -1);
btrfs_wait_ordered_roots(fs_info, U64_MAX, 0,
(u64)-1);
}
trans = btrfs_join_transaction(root);
if (IS_ERR(trans))
return PTR_ERR(trans);
if (have_pinned_space >= 0 ||
test_bit(BTRFS_TRANS_HAVE_FREE_BGS,
&trans->transaction->flags) ||
need_commit > 0) {
ret = btrfs_commit_transaction(trans);
if (ret)
return ret;
/*
* The cleaner kthread might still be doing iput
* operations. Wait for it to finish so that
* more space is released. We don't need to
* explicitly run the delayed iputs here because
* the commit_transaction would have woken up
* the cleaner.
*/
ret = btrfs_wait_on_delayed_iputs(fs_info);
if (ret)
return ret;
goto again;
} else {
btrfs_end_transaction(trans);
}
}
trace_btrfs_space_reservation(fs_info,
"space_info:enospc",
data_sinfo->flags, bytes, 1);
return -ENOSPC;
}
btrfs_space_info_update_bytes_may_use(fs_info, data_sinfo, bytes);
spin_unlock(&data_sinfo->lock);
return 0;
}
int btrfs_check_data_free_space(struct inode *inode,
struct extent_changeset **reserved, u64 start, u64 len)
{
struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
int ret;
/* align the range */
len = round_up(start + len, fs_info->sectorsize) -
round_down(start, fs_info->sectorsize);
start = round_down(start, fs_info->sectorsize);
ret = btrfs_alloc_data_chunk_ondemand(BTRFS_I(inode), len);
if (ret < 0)
return ret;
/* Use new btrfs_qgroup_reserve_data to reserve precious data space. */
ret = btrfs_qgroup_reserve_data(inode, reserved, start, len);
if (ret < 0)
btrfs_free_reserved_data_space_noquota(inode, start, len);
else
ret = 0;
return ret;
}
/*
* Called if we need to clear a data reservation for this inode
* Normally in a error case.
*
* This one will *NOT* use accurate qgroup reserved space API, just for case
* which we can't sleep and is sure it won't affect qgroup reserved space.
* Like clear_bit_hook().
*/
void btrfs_free_reserved_data_space_noquota(struct inode *inode, u64 start,
u64 len)
{
struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
struct btrfs_space_info *data_sinfo;
/* Make sure the range is aligned to sectorsize */
len = round_up(start + len, fs_info->sectorsize) -
round_down(start, fs_info->sectorsize);
start = round_down(start, fs_info->sectorsize);
data_sinfo = fs_info->data_sinfo;
spin_lock(&data_sinfo->lock);
btrfs_space_info_update_bytes_may_use(fs_info, data_sinfo, -len);
spin_unlock(&data_sinfo->lock);
}
/*
* Called if we need to clear a data reservation for this inode
* Normally in a error case.
*
* This one will handle the per-inode data rsv map for accurate reserved
* space framework.
*/
void btrfs_free_reserved_data_space(struct inode *inode,
struct extent_changeset *reserved, u64 start, u64 len)
{
struct btrfs_root *root = BTRFS_I(inode)->root;
/* Make sure the range is aligned to sectorsize */
len = round_up(start + len, root->fs_info->sectorsize) -
round_down(start, root->fs_info->sectorsize);
start = round_down(start, root->fs_info->sectorsize);
btrfs_free_reserved_data_space_noquota(inode, start, len);
btrfs_qgroup_free_data(inode, reserved, start, len);
}
/**
* btrfs_inode_rsv_release - release any excessive reservation.
* @inode - the inode we need to release from.
* @qgroup_free - free or convert qgroup meta.
* Unlike normal operation, qgroup meta reservation needs to know if we are
* freeing qgroup reservation or just converting it into per-trans. Normally
* @qgroup_free is true for error handling, and false for normal release.
*
* This is the same as btrfs_block_rsv_release, except that it handles the
* tracepoint for the reservation.
*/
static void btrfs_inode_rsv_release(struct btrfs_inode *inode, bool qgroup_free)
{
struct btrfs_fs_info *fs_info = inode->root->fs_info;
struct btrfs_block_rsv *block_rsv = &inode->block_rsv;
u64 released = 0;
u64 qgroup_to_release = 0;
/*
* Since we statically set the block_rsv->size we just want to say we
* are releasing 0 bytes, and then we'll just get the reservation over
* the size free'd.
*/
released = __btrfs_block_rsv_release(fs_info, block_rsv, 0,
&qgroup_to_release);
if (released > 0)
trace_btrfs_space_reservation(fs_info, "delalloc",
btrfs_ino(inode), released, 0);
if (qgroup_free)
btrfs_qgroup_free_meta_prealloc(inode->root, qgroup_to_release);
else
btrfs_qgroup_convert_reserved_meta(inode->root,
qgroup_to_release);
}
static void btrfs_calculate_inode_block_rsv_size(struct btrfs_fs_info *fs_info,
struct btrfs_inode *inode)
{
struct btrfs_block_rsv *block_rsv = &inode->block_rsv;
u64 reserve_size = 0;
u64 qgroup_rsv_size = 0;
u64 csum_leaves;
unsigned outstanding_extents;
lockdep_assert_held(&inode->lock);
outstanding_extents = inode->outstanding_extents;
/*
* Insert size for the number of outstanding extents, 1 normal size for
* updating the inode.
*/
if (outstanding_extents) {
reserve_size = btrfs_calc_insert_metadata_size(fs_info,
outstanding_extents);
reserve_size += btrfs_calc_metadata_size(fs_info, 1);
}
csum_leaves = btrfs_csum_bytes_to_leaves(fs_info,
inode->csum_bytes);
reserve_size += btrfs_calc_insert_metadata_size(fs_info,
csum_leaves);
/*
* For qgroup rsv, the calculation is very simple:
* account one nodesize for each outstanding extent
*
* This is overestimating in most cases.
*/
qgroup_rsv_size = (u64)outstanding_extents * fs_info->nodesize;
spin_lock(&block_rsv->lock);
block_rsv->size = reserve_size;
block_rsv->qgroup_rsv_size = qgroup_rsv_size;
spin_unlock(&block_rsv->lock);
}
static void calc_inode_reservations(struct btrfs_fs_info *fs_info,
u64 num_bytes, u64 *meta_reserve,
u64 *qgroup_reserve)
{
u64 nr_extents = count_max_extents(num_bytes);
u64 csum_leaves = btrfs_csum_bytes_to_leaves(fs_info, num_bytes);
u64 inode_update = btrfs_calc_metadata_size(fs_info, 1);
*meta_reserve = btrfs_calc_insert_metadata_size(fs_info,
nr_extents + csum_leaves);
/*
* finish_ordered_io has to update the inode, so add the space required
* for an inode update.
*/
*meta_reserve += inode_update;
*qgroup_reserve = nr_extents * fs_info->nodesize;
}
int btrfs_delalloc_reserve_metadata(struct btrfs_inode *inode, u64 num_bytes)
{
struct btrfs_root *root = inode->root;
struct btrfs_fs_info *fs_info = root->fs_info;
struct btrfs_block_rsv *block_rsv = &inode->block_rsv;
u64 meta_reserve, qgroup_reserve;
unsigned nr_extents;
enum btrfs_reserve_flush_enum flush = BTRFS_RESERVE_FLUSH_ALL;
int ret = 0;
/*
* If we are a free space inode we need to not flush since we will be in
* the middle of a transaction commit. We also don't need the delalloc
* mutex since we won't race with anybody. We need this mostly to make
* lockdep shut its filthy mouth.
*
* If we have a transaction open (can happen if we call truncate_block
* from truncate), then we need FLUSH_LIMIT so we don't deadlock.
*/
if (btrfs_is_free_space_inode(inode)) {
flush = BTRFS_RESERVE_NO_FLUSH;
} else {
if (current->journal_info)
flush = BTRFS_RESERVE_FLUSH_LIMIT;
if (btrfs_transaction_in_commit(fs_info))
schedule_timeout(1);
}
num_bytes = ALIGN(num_bytes, fs_info->sectorsize);
/*
* We always want to do it this way, every other way is wrong and ends
* in tears. Pre-reserving the amount we are going to add will always
* be the right way, because otherwise if we have enough parallelism we
* could end up with thousands of inodes all holding little bits of
* reservations they were able to make previously and the only way to
* reclaim that space is to ENOSPC out the operations and clear
* everything out and try again, which is bad. This way we just
* over-reserve slightly, and clean up the mess when we are done.
*/
calc_inode_reservations(fs_info, num_bytes, &meta_reserve,
&qgroup_reserve);
ret = btrfs_qgroup_reserve_meta_prealloc(root, qgroup_reserve, true);
if (ret)
return ret;
ret = btrfs_reserve_metadata_bytes(root, block_rsv, meta_reserve, flush);
if (ret) {
btrfs_qgroup_free_meta_prealloc(root, qgroup_reserve);
return ret;
}
/*
* Now we need to update our outstanding extents and csum bytes _first_
* and then add the reservation to the block_rsv. This keeps us from
* racing with an ordered completion or some such that would think it
* needs to free the reservation we just made.
*/
spin_lock(&inode->lock);
nr_extents = count_max_extents(num_bytes);
btrfs_mod_outstanding_extents(inode, nr_extents);
inode->csum_bytes += num_bytes;
btrfs_calculate_inode_block_rsv_size(fs_info, inode);
spin_unlock(&inode->lock);
/* Now we can safely add our space to our block rsv */
btrfs_block_rsv_add_bytes(block_rsv, meta_reserve, false);
trace_btrfs_space_reservation(root->fs_info, "delalloc",
btrfs_ino(inode), meta_reserve, 1);
spin_lock(&block_rsv->lock);
block_rsv->qgroup_rsv_reserved += qgroup_reserve;
spin_unlock(&block_rsv->lock);
return 0;
}
/**
* btrfs_delalloc_release_metadata - release a metadata reservation for an inode
* @inode: the inode to release the reservation for.
* @num_bytes: the number of bytes we are releasing.
* @qgroup_free: free qgroup reservation or convert it to per-trans reservation
*
* This will release the metadata reservation for an inode. This can be called
* once we complete IO for a given set of bytes to release their metadata
* reservations, or on error for the same reason.
*/
void btrfs_delalloc_release_metadata(struct btrfs_inode *inode, u64 num_bytes,
bool qgroup_free)
{
struct btrfs_fs_info *fs_info = inode->root->fs_info;
num_bytes = ALIGN(num_bytes, fs_info->sectorsize);
spin_lock(&inode->lock);
inode->csum_bytes -= num_bytes;
btrfs_calculate_inode_block_rsv_size(fs_info, inode);
spin_unlock(&inode->lock);
if (btrfs_is_testing(fs_info))
return;
btrfs_inode_rsv_release(inode, qgroup_free);
}
/**
* btrfs_delalloc_release_extents - release our outstanding_extents
* @inode: the inode to balance the reservation for.
* @num_bytes: the number of bytes we originally reserved with
*
* When we reserve space we increase outstanding_extents for the extents we may
* add. Once we've set the range as delalloc or created our ordered extents we
* have outstanding_extents to track the real usage, so we use this to free our
* temporarily tracked outstanding_extents. This _must_ be used in conjunction
* with btrfs_delalloc_reserve_metadata.
*/
void btrfs_delalloc_release_extents(struct btrfs_inode *inode, u64 num_bytes)
{
struct btrfs_fs_info *fs_info = inode->root->fs_info;
unsigned num_extents;
spin_lock(&inode->lock);
num_extents = count_max_extents(num_bytes);
btrfs_mod_outstanding_extents(inode, -num_extents);
btrfs_calculate_inode_block_rsv_size(fs_info, inode);
spin_unlock(&inode->lock);
if (btrfs_is_testing(fs_info))
return;
btrfs_inode_rsv_release(inode, true);
}
/**
* btrfs_delalloc_reserve_space - reserve data and metadata space for
* delalloc
* @inode: inode we're writing to
* @start: start range we are writing to
* @len: how long the range we are writing to
* @reserved: mandatory parameter, record actually reserved qgroup ranges of
* current reservation.
*
* This will do the following things
*
* - reserve space in data space info for num bytes
* and reserve precious corresponding qgroup space
* (Done in check_data_free_space)
*
* - reserve space for metadata space, based on the number of outstanding
* extents and how much csums will be needed
* also reserve metadata space in a per root over-reserve method.
* - add to the inodes->delalloc_bytes
* - add it to the fs_info's delalloc inodes list.
* (Above 3 all done in delalloc_reserve_metadata)
*
* Return 0 for success
* Return <0 for error(-ENOSPC or -EQUOT)
*/
int btrfs_delalloc_reserve_space(struct inode *inode,
struct extent_changeset **reserved, u64 start, u64 len)
{
int ret;
ret = btrfs_check_data_free_space(inode, reserved, start, len);
if (ret < 0)
return ret;
ret = btrfs_delalloc_reserve_metadata(BTRFS_I(inode), len);
if (ret < 0)
btrfs_free_reserved_data_space(inode, *reserved, start, len);
return ret;
}
/**
* btrfs_delalloc_release_space - release data and metadata space for delalloc
* @inode: inode we're releasing space for
* @start: start position of the space already reserved
* @len: the len of the space already reserved
* @release_bytes: the len of the space we consumed or didn't use
*
* This function will release the metadata space that was not used and will
* decrement ->delalloc_bytes and remove it from the fs_info delalloc_inodes
* list if there are no delalloc bytes left.
* Also it will handle the qgroup reserved space.
*/
void btrfs_delalloc_release_space(struct inode *inode,
struct extent_changeset *reserved,
u64 start, u64 len, bool qgroup_free)
{
btrfs_delalloc_release_metadata(BTRFS_I(inode), len, qgroup_free);
btrfs_free_reserved_data_space(inode, reserved, start, len);
}