mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-19 10:44:14 +08:00
ca7d94524a
This patch adds DT board setup for the LaCie NAS Network Space Lite v2.
This board is derived from the Network Space v2 and a lot of hardware
characteristics are shared.
- CPU: Marvell 88F6192 800Mhz
- SDRAM memory: 128MB DDR2 200Mhz
- 1 SATA port: internal
- Gigabit ethernet: PHY Marvell 88E1318
- Flash memory: SPI NOR 512KB (Macronix MX25L4005A)
- i2c EEPROM: 512 bytes (24C04 type)
- 2 USB2 ports: host and host/device
- 1 push button
- 1 SATA LED (bi-color, blue and red)
Note that the SATA LED is not compatible with the driver leds-ns2. The
LED behaviour ("on", "off" or "SATA activity blink") is controlled via
a single MPP (21).
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
38 lines
1.9 KiB
Makefile
38 lines
1.9 KiB
Makefile
obj-y += common.o addr-map.o irq.o pcie.o mpp.o
|
|
|
|
obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o
|
|
obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
|
|
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
|
|
obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
|
|
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
|
|
obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
|
|
obj-$(CONFIG_MACH_GURUPLUG) += guruplug-setup.o
|
|
obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o
|
|
obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
|
|
obj-$(CONFIG_MACH_TS41X) += ts41x-setup.o tsx1x-common.o
|
|
obj-$(CONFIG_MACH_OPENRD) += openrd-setup.o
|
|
obj-$(CONFIG_MACH_NETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o
|
|
obj-$(CONFIG_MACH_INETSPACE_V2) += netspace_v2-setup.o lacie_v2-common.o
|
|
obj-$(CONFIG_MACH_NETSPACE_MAX_V2) += netspace_v2-setup.o lacie_v2-common.o
|
|
obj-$(CONFIG_MACH_D2NET_V2) += d2net_v2-setup.o lacie_v2-common.o
|
|
obj-$(CONFIG_MACH_NET2BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
|
|
obj-$(CONFIG_MACH_NET5BIG_V2) += netxbig_v2-setup.o lacie_v2-common.o
|
|
obj-$(CONFIG_MACH_T5325) += t5325-setup.o
|
|
|
|
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
|
|
obj-$(CONFIG_ARCH_KIRKWOOD_DT) += board-dt.o
|
|
obj-$(CONFIG_MACH_DREAMPLUG_DT) += board-dreamplug.o
|
|
obj-$(CONFIG_MACH_ICONNECT_DT) += board-iconnect.o
|
|
obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += board-dnskw.o
|
|
obj-$(CONFIG_MACH_IB62X0_DT) += board-ib62x0.o
|
|
obj-$(CONFIG_MACH_TS219_DT) += board-ts219.o tsx1x-common.o
|
|
obj-$(CONFIG_MACH_DOCKSTAR_DT) += board-dockstar.o
|
|
obj-$(CONFIG_MACH_GOFLEXNET_DT) += board-goflexnet.o
|
|
obj-$(CONFIG_MACH_LSXL_DT) += board-lsxl.o
|
|
obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT) += board-iomega_ix2_200.o
|
|
obj-$(CONFIG_MACH_KM_KIRKWOOD_DT) += board-km_kirkwood.o
|
|
obj-$(CONFIG_MACH_INETSPACE_V2_DT) += board-ns2.o
|
|
obj-$(CONFIG_MACH_NETSPACE_V2_DT) += board-ns2.o
|
|
obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT) += board-ns2.o
|
|
obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT) += board-ns2.o
|