2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 22:53:55 +08:00
linux-next/drivers/ata/ahci_platform.c
Tejun Heo fad16e7a7f ahci: fix module refcount breakage introduced by libahci split
libata depends on scsi_host_template for module reference counting and
sht's should be owned by each low level driver.  During libahci split,
the sht was left with libahci.ko leaving the actual low level drivers
not reference counted.  This made ahci and ahci_platform always
unloadable even while they're being actively used.

Fix it by defining AHCI_SHT() macro in ahci.h and defining a sht for
each low level ahci driver.

stable: only applicable to 2.6.35.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Pedro Francisco <pedrogfrancisco@gmail.com>
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-09-28 15:14:51 -04:00

201 lines
4.7 KiB
C

/*
* AHCI SATA platform driver
*
* Copyright 2004-2005 Red Hat, Inc.
* Jeff Garzik <jgarzik@pobox.com>
* Copyright 2010 MontaVista Software, LLC.
* Anton Vorontsov <avorontsov@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*/
#include <linux/kernel.h>
#include <linux/gfp.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/libata.h>
#include <linux/ahci_platform.h>
#include "ahci.h"
static struct scsi_host_template ahci_platform_sht = {
AHCI_SHT("ahci_platform"),
};
static int __init ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ahci_platform_data *pdata = dev->platform_data;
struct ata_port_info pi = {
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
};
const struct ata_port_info *ppi[] = { &pi, NULL };
struct ahci_host_priv *hpriv;
struct ata_host *host;
struct resource *mem;
int irq;
int n_ports;
int i;
int rc;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
dev_err(dev, "no mmio space\n");
return -EINVAL;
}
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
dev_err(dev, "no irq\n");
return -EINVAL;
}
if (pdata && pdata->ata_port_info)
pi = *pdata->ata_port_info;
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv) {
dev_err(dev, "can't alloc ahci_host_priv\n");
return -ENOMEM;
}
hpriv->flags |= (unsigned long)pi.private_data;
hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
if (!hpriv->mmio) {
dev_err(dev, "can't map %pR\n", mem);
return -ENOMEM;
}
/*
* Some platforms might need to prepare for mmio region access,
* which could be done in the following init call. So, the mmio
* region shouldn't be accessed before init (if provided) has
* returned successfully.
*/
if (pdata && pdata->init) {
rc = pdata->init(dev, hpriv->mmio);
if (rc)
return rc;
}
ahci_save_initial_config(dev, hpriv,
pdata ? pdata->force_port_map : 0,
pdata ? pdata->mask_port_map : 0);
/* prepare host */
if (hpriv->cap & HOST_CAP_NCQ)
pi.flags |= ATA_FLAG_NCQ;
if (hpriv->cap & HOST_CAP_PMP)
pi.flags |= ATA_FLAG_PMP;
ahci_set_em_messages(hpriv, &pi);
/* CAP.NP sometimes indicate the index of the last enabled
* port, at other times, that of the last possible port, so
* determining the maximum port number requires looking at
* both CAP.NP and port_map.
*/
n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
host = ata_host_alloc_pinfo(dev, ppi, n_ports);
if (!host) {
rc = -ENOMEM;
goto err0;
}
host->private_data = hpriv;
if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
host->flags |= ATA_HOST_PARALLEL_SCAN;
else
printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
if (pi.flags & ATA_FLAG_EM)
ahci_reset_em(host);
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
ata_port_desc(ap, "mmio %pR", mem);
ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
/* set initial link pm policy */
ap->pm_policy = NOT_AVAILABLE;
/* set enclosure management message type */
if (ap->flags & ATA_FLAG_EM)
ap->em_message_type = hpriv->em_msg_type;
/* disabled/not-implemented port */
if (!(hpriv->port_map & (1 << i)))
ap->ops = &ata_dummy_port_ops;
}
rc = ahci_reset_controller(host);
if (rc)
goto err0;
ahci_init_controller(host);
ahci_print_info(host, "platform");
rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
&ahci_platform_sht);
if (rc)
goto err0;
return 0;
err0:
if (pdata && pdata->exit)
pdata->exit(dev);
return rc;
}
static int __devexit ahci_remove(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ahci_platform_data *pdata = dev->platform_data;
struct ata_host *host = dev_get_drvdata(dev);
ata_host_detach(host);
if (pdata && pdata->exit)
pdata->exit(dev);
return 0;
}
static struct platform_driver ahci_driver = {
.remove = __devexit_p(ahci_remove),
.driver = {
.name = "ahci",
.owner = THIS_MODULE,
},
};
static int __init ahci_init(void)
{
return platform_driver_probe(&ahci_driver, ahci_probe);
}
module_init(ahci_init);
static void __exit ahci_exit(void)
{
platform_driver_unregister(&ahci_driver);
}
module_exit(ahci_exit);
MODULE_DESCRIPTION("AHCI SATA platform driver");
MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:ahci");