mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 20:53:53 +08:00
ebf3992061
This removes the ifdef clutter a bit and saves few lines. It also makes it easier to detect the remaining places where we have conditional building of code done based on if defined for things like DMA. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
627 lines
17 KiB
C
627 lines
17 KiB
C
/*
|
|
* MUSB OTG driver register defines
|
|
*
|
|
* Copyright 2005 Mentor Graphics Corporation
|
|
* Copyright (C) 2005-2006 by Texas Instruments
|
|
* Copyright (C) 2006-2007 Nokia Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
|
|
* 02110-1301 USA
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
|
* NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
|
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
#ifndef __MUSB_REGS_H__
|
|
#define __MUSB_REGS_H__
|
|
|
|
#define MUSB_EP0_FIFOSIZE 64 /* This is non-configurable */
|
|
|
|
/*
|
|
* MUSB Register bits
|
|
*/
|
|
|
|
/* POWER */
|
|
#define MUSB_POWER_ISOUPDATE 0x80
|
|
#define MUSB_POWER_SOFTCONN 0x40
|
|
#define MUSB_POWER_HSENAB 0x20
|
|
#define MUSB_POWER_HSMODE 0x10
|
|
#define MUSB_POWER_RESET 0x08
|
|
#define MUSB_POWER_RESUME 0x04
|
|
#define MUSB_POWER_SUSPENDM 0x02
|
|
#define MUSB_POWER_ENSUSPEND 0x01
|
|
|
|
/* INTRUSB */
|
|
#define MUSB_INTR_SUSPEND 0x01
|
|
#define MUSB_INTR_RESUME 0x02
|
|
#define MUSB_INTR_RESET 0x04
|
|
#define MUSB_INTR_BABBLE 0x04
|
|
#define MUSB_INTR_SOF 0x08
|
|
#define MUSB_INTR_CONNECT 0x10
|
|
#define MUSB_INTR_DISCONNECT 0x20
|
|
#define MUSB_INTR_SESSREQ 0x40
|
|
#define MUSB_INTR_VBUSERROR 0x80 /* For SESSION end */
|
|
|
|
/* DEVCTL */
|
|
#define MUSB_DEVCTL_BDEVICE 0x80
|
|
#define MUSB_DEVCTL_FSDEV 0x40
|
|
#define MUSB_DEVCTL_LSDEV 0x20
|
|
#define MUSB_DEVCTL_VBUS 0x18
|
|
#define MUSB_DEVCTL_VBUS_SHIFT 3
|
|
#define MUSB_DEVCTL_HM 0x04
|
|
#define MUSB_DEVCTL_HR 0x02
|
|
#define MUSB_DEVCTL_SESSION 0x01
|
|
|
|
/* BABBLE_CTL */
|
|
#define MUSB_BABBLE_FORCE_TXIDLE 0x80
|
|
#define MUSB_BABBLE_SW_SESSION_CTRL 0x40
|
|
#define MUSB_BABBLE_STUCK_J 0x20
|
|
#define MUSB_BABBLE_RCV_DISABLE 0x04
|
|
|
|
/* MUSB ULPI VBUSCONTROL */
|
|
#define MUSB_ULPI_USE_EXTVBUS 0x01
|
|
#define MUSB_ULPI_USE_EXTVBUSIND 0x02
|
|
/* ULPI_REG_CONTROL */
|
|
#define MUSB_ULPI_REG_REQ (1 << 0)
|
|
#define MUSB_ULPI_REG_CMPLT (1 << 1)
|
|
#define MUSB_ULPI_RDN_WR (1 << 2)
|
|
|
|
/* TESTMODE */
|
|
#define MUSB_TEST_FORCE_HOST 0x80
|
|
#define MUSB_TEST_FIFO_ACCESS 0x40
|
|
#define MUSB_TEST_FORCE_FS 0x20
|
|
#define MUSB_TEST_FORCE_HS 0x10
|
|
#define MUSB_TEST_PACKET 0x08
|
|
#define MUSB_TEST_K 0x04
|
|
#define MUSB_TEST_J 0x02
|
|
#define MUSB_TEST_SE0_NAK 0x01
|
|
|
|
/* Allocate for double-packet buffering (effectively doubles assigned _SIZE) */
|
|
#define MUSB_FIFOSZ_DPB 0x10
|
|
/* Allocation size (8, 16, 32, ... 4096) */
|
|
#define MUSB_FIFOSZ_SIZE 0x0f
|
|
|
|
/* CSR0 */
|
|
#define MUSB_CSR0_FLUSHFIFO 0x0100
|
|
#define MUSB_CSR0_TXPKTRDY 0x0002
|
|
#define MUSB_CSR0_RXPKTRDY 0x0001
|
|
|
|
/* CSR0 in Peripheral mode */
|
|
#define MUSB_CSR0_P_SVDSETUPEND 0x0080
|
|
#define MUSB_CSR0_P_SVDRXPKTRDY 0x0040
|
|
#define MUSB_CSR0_P_SENDSTALL 0x0020
|
|
#define MUSB_CSR0_P_SETUPEND 0x0010
|
|
#define MUSB_CSR0_P_DATAEND 0x0008
|
|
#define MUSB_CSR0_P_SENTSTALL 0x0004
|
|
|
|
/* CSR0 in Host mode */
|
|
#define MUSB_CSR0_H_DIS_PING 0x0800
|
|
#define MUSB_CSR0_H_WR_DATATOGGLE 0x0400 /* Set to allow setting: */
|
|
#define MUSB_CSR0_H_DATATOGGLE 0x0200 /* Data toggle control */
|
|
#define MUSB_CSR0_H_NAKTIMEOUT 0x0080
|
|
#define MUSB_CSR0_H_STATUSPKT 0x0040
|
|
#define MUSB_CSR0_H_REQPKT 0x0020
|
|
#define MUSB_CSR0_H_ERROR 0x0010
|
|
#define MUSB_CSR0_H_SETUPPKT 0x0008
|
|
#define MUSB_CSR0_H_RXSTALL 0x0004
|
|
|
|
/* CSR0 bits to avoid zeroing (write zero clears, write 1 ignored) */
|
|
#define MUSB_CSR0_P_WZC_BITS \
|
|
(MUSB_CSR0_P_SENTSTALL)
|
|
#define MUSB_CSR0_H_WZC_BITS \
|
|
(MUSB_CSR0_H_NAKTIMEOUT | MUSB_CSR0_H_RXSTALL \
|
|
| MUSB_CSR0_RXPKTRDY)
|
|
|
|
/* TxType/RxType */
|
|
#define MUSB_TYPE_SPEED 0xc0
|
|
#define MUSB_TYPE_SPEED_SHIFT 6
|
|
#define MUSB_TYPE_PROTO 0x30 /* Implicitly zero for ep0 */
|
|
#define MUSB_TYPE_PROTO_SHIFT 4
|
|
#define MUSB_TYPE_REMOTE_END 0xf /* Implicitly zero for ep0 */
|
|
|
|
/* CONFIGDATA */
|
|
#define MUSB_CONFIGDATA_MPRXE 0x80 /* Auto bulk pkt combining */
|
|
#define MUSB_CONFIGDATA_MPTXE 0x40 /* Auto bulk pkt splitting */
|
|
#define MUSB_CONFIGDATA_BIGENDIAN 0x20
|
|
#define MUSB_CONFIGDATA_HBRXE 0x10 /* HB-ISO for RX */
|
|
#define MUSB_CONFIGDATA_HBTXE 0x08 /* HB-ISO for TX */
|
|
#define MUSB_CONFIGDATA_DYNFIFO 0x04 /* Dynamic FIFO sizing */
|
|
#define MUSB_CONFIGDATA_SOFTCONE 0x02 /* SoftConnect */
|
|
#define MUSB_CONFIGDATA_UTMIDW 0x01 /* Data width 0/1 => 8/16bits */
|
|
|
|
/* TXCSR in Peripheral and Host mode */
|
|
#define MUSB_TXCSR_AUTOSET 0x8000
|
|
#define MUSB_TXCSR_DMAENAB 0x1000
|
|
#define MUSB_TXCSR_FRCDATATOG 0x0800
|
|
#define MUSB_TXCSR_DMAMODE 0x0400
|
|
#define MUSB_TXCSR_CLRDATATOG 0x0040
|
|
#define MUSB_TXCSR_FLUSHFIFO 0x0008
|
|
#define MUSB_TXCSR_FIFONOTEMPTY 0x0002
|
|
#define MUSB_TXCSR_TXPKTRDY 0x0001
|
|
|
|
/* TXCSR in Peripheral mode */
|
|
#define MUSB_TXCSR_P_ISO 0x4000
|
|
#define MUSB_TXCSR_P_INCOMPTX 0x0080
|
|
#define MUSB_TXCSR_P_SENTSTALL 0x0020
|
|
#define MUSB_TXCSR_P_SENDSTALL 0x0010
|
|
#define MUSB_TXCSR_P_UNDERRUN 0x0004
|
|
|
|
/* TXCSR in Host mode */
|
|
#define MUSB_TXCSR_H_WR_DATATOGGLE 0x0200
|
|
#define MUSB_TXCSR_H_DATATOGGLE 0x0100
|
|
#define MUSB_TXCSR_H_NAKTIMEOUT 0x0080
|
|
#define MUSB_TXCSR_H_RXSTALL 0x0020
|
|
#define MUSB_TXCSR_H_ERROR 0x0004
|
|
|
|
/* TXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
|
|
#define MUSB_TXCSR_P_WZC_BITS \
|
|
(MUSB_TXCSR_P_INCOMPTX | MUSB_TXCSR_P_SENTSTALL \
|
|
| MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_FIFONOTEMPTY)
|
|
#define MUSB_TXCSR_H_WZC_BITS \
|
|
(MUSB_TXCSR_H_NAKTIMEOUT | MUSB_TXCSR_H_RXSTALL \
|
|
| MUSB_TXCSR_H_ERROR | MUSB_TXCSR_FIFONOTEMPTY)
|
|
|
|
/* RXCSR in Peripheral and Host mode */
|
|
#define MUSB_RXCSR_AUTOCLEAR 0x8000
|
|
#define MUSB_RXCSR_DMAENAB 0x2000
|
|
#define MUSB_RXCSR_DISNYET 0x1000
|
|
#define MUSB_RXCSR_PID_ERR 0x1000
|
|
#define MUSB_RXCSR_DMAMODE 0x0800
|
|
#define MUSB_RXCSR_INCOMPRX 0x0100
|
|
#define MUSB_RXCSR_CLRDATATOG 0x0080
|
|
#define MUSB_RXCSR_FLUSHFIFO 0x0010
|
|
#define MUSB_RXCSR_DATAERROR 0x0008
|
|
#define MUSB_RXCSR_FIFOFULL 0x0002
|
|
#define MUSB_RXCSR_RXPKTRDY 0x0001
|
|
|
|
/* RXCSR in Peripheral mode */
|
|
#define MUSB_RXCSR_P_ISO 0x4000
|
|
#define MUSB_RXCSR_P_SENTSTALL 0x0040
|
|
#define MUSB_RXCSR_P_SENDSTALL 0x0020
|
|
#define MUSB_RXCSR_P_OVERRUN 0x0004
|
|
|
|
/* RXCSR in Host mode */
|
|
#define MUSB_RXCSR_H_AUTOREQ 0x4000
|
|
#define MUSB_RXCSR_H_WR_DATATOGGLE 0x0400
|
|
#define MUSB_RXCSR_H_DATATOGGLE 0x0200
|
|
#define MUSB_RXCSR_H_RXSTALL 0x0040
|
|
#define MUSB_RXCSR_H_REQPKT 0x0020
|
|
#define MUSB_RXCSR_H_ERROR 0x0004
|
|
|
|
/* RXCSR bits to avoid zeroing (write zero clears, write 1 ignored) */
|
|
#define MUSB_RXCSR_P_WZC_BITS \
|
|
(MUSB_RXCSR_P_SENTSTALL | MUSB_RXCSR_P_OVERRUN \
|
|
| MUSB_RXCSR_RXPKTRDY)
|
|
#define MUSB_RXCSR_H_WZC_BITS \
|
|
(MUSB_RXCSR_H_RXSTALL | MUSB_RXCSR_H_ERROR \
|
|
| MUSB_RXCSR_DATAERROR | MUSB_RXCSR_RXPKTRDY)
|
|
|
|
/* HUBADDR */
|
|
#define MUSB_HUBADDR_MULTI_TT 0x80
|
|
|
|
|
|
#ifndef CONFIG_BLACKFIN
|
|
|
|
/*
|
|
* Common USB registers
|
|
*/
|
|
|
|
#define MUSB_FADDR 0x00 /* 8-bit */
|
|
#define MUSB_POWER 0x01 /* 8-bit */
|
|
|
|
#define MUSB_INTRTX 0x02 /* 16-bit */
|
|
#define MUSB_INTRRX 0x04
|
|
#define MUSB_INTRTXE 0x06
|
|
#define MUSB_INTRRXE 0x08
|
|
#define MUSB_INTRUSB 0x0A /* 8 bit */
|
|
#define MUSB_INTRUSBE 0x0B /* 8 bit */
|
|
#define MUSB_FRAME 0x0C
|
|
#define MUSB_INDEX 0x0E /* 8 bit */
|
|
#define MUSB_TESTMODE 0x0F /* 8 bit */
|
|
|
|
/*
|
|
* Additional Control Registers
|
|
*/
|
|
|
|
#define MUSB_DEVCTL 0x60 /* 8 bit */
|
|
#define MUSB_BABBLE_CTL 0x61 /* 8 bit */
|
|
|
|
/* These are always controlled through the INDEX register */
|
|
#define MUSB_TXFIFOSZ 0x62 /* 8-bit (see masks) */
|
|
#define MUSB_RXFIFOSZ 0x63 /* 8-bit (see masks) */
|
|
#define MUSB_TXFIFOADD 0x64 /* 16-bit offset shifted right 3 */
|
|
#define MUSB_RXFIFOADD 0x66 /* 16-bit offset shifted right 3 */
|
|
|
|
/* REVISIT: vctrl/vstatus: optional vendor utmi+phy register at 0x68 */
|
|
#define MUSB_HWVERS 0x6C /* 8 bit */
|
|
#define MUSB_ULPI_BUSCONTROL 0x70 /* 8 bit */
|
|
#define MUSB_ULPI_INT_MASK 0x72 /* 8 bit */
|
|
#define MUSB_ULPI_INT_SRC 0x73 /* 8 bit */
|
|
#define MUSB_ULPI_REG_DATA 0x74 /* 8 bit */
|
|
#define MUSB_ULPI_REG_ADDR 0x75 /* 8 bit */
|
|
#define MUSB_ULPI_REG_CONTROL 0x76 /* 8 bit */
|
|
#define MUSB_ULPI_RAW_DATA 0x77 /* 8 bit */
|
|
|
|
#define MUSB_EPINFO 0x78 /* 8 bit */
|
|
#define MUSB_RAMINFO 0x79 /* 8 bit */
|
|
#define MUSB_LINKINFO 0x7a /* 8 bit */
|
|
#define MUSB_VPLEN 0x7b /* 8 bit */
|
|
#define MUSB_HS_EOF1 0x7c /* 8 bit */
|
|
#define MUSB_FS_EOF1 0x7d /* 8 bit */
|
|
#define MUSB_LS_EOF1 0x7e /* 8 bit */
|
|
|
|
/* Offsets to endpoint registers */
|
|
#define MUSB_TXMAXP 0x00
|
|
#define MUSB_TXCSR 0x02
|
|
#define MUSB_CSR0 MUSB_TXCSR /* Re-used for EP0 */
|
|
#define MUSB_RXMAXP 0x04
|
|
#define MUSB_RXCSR 0x06
|
|
#define MUSB_RXCOUNT 0x08
|
|
#define MUSB_COUNT0 MUSB_RXCOUNT /* Re-used for EP0 */
|
|
#define MUSB_TXTYPE 0x0A
|
|
#define MUSB_TYPE0 MUSB_TXTYPE /* Re-used for EP0 */
|
|
#define MUSB_TXINTERVAL 0x0B
|
|
#define MUSB_NAKLIMIT0 MUSB_TXINTERVAL /* Re-used for EP0 */
|
|
#define MUSB_RXTYPE 0x0C
|
|
#define MUSB_RXINTERVAL 0x0D
|
|
#define MUSB_FIFOSIZE 0x0F
|
|
#define MUSB_CONFIGDATA MUSB_FIFOSIZE /* Re-used for EP0 */
|
|
|
|
#include "tusb6010.h" /* Needed "only" for TUSB_EP0_CONF */
|
|
|
|
#define MUSB_TXCSR_MODE 0x2000
|
|
|
|
/* "bus control"/target registers, for host side multipoint (external hubs) */
|
|
#define MUSB_TXFUNCADDR 0x00
|
|
#define MUSB_TXHUBADDR 0x02
|
|
#define MUSB_TXHUBPORT 0x03
|
|
|
|
#define MUSB_RXFUNCADDR 0x04
|
|
#define MUSB_RXHUBADDR 0x06
|
|
#define MUSB_RXHUBPORT 0x07
|
|
|
|
#define MUSB_BUSCTL_OFFSET(_epnum, _offset) \
|
|
(0x80 + (8*(_epnum)) + (_offset))
|
|
|
|
static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
|
|
{
|
|
musb_writeb(mbase, MUSB_TXFIFOSZ, c_size);
|
|
}
|
|
|
|
static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
|
|
{
|
|
musb_writew(mbase, MUSB_TXFIFOADD, c_off);
|
|
}
|
|
|
|
static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
|
|
{
|
|
musb_writeb(mbase, MUSB_RXFIFOSZ, c_size);
|
|
}
|
|
|
|
static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
|
|
{
|
|
musb_writew(mbase, MUSB_RXFIFOADD, c_off);
|
|
}
|
|
|
|
static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
|
|
{
|
|
musb_writeb(mbase, MUSB_ULPI_BUSCONTROL, val);
|
|
}
|
|
|
|
static inline u8 musb_read_txfifosz(void __iomem *mbase)
|
|
{
|
|
return musb_readb(mbase, MUSB_TXFIFOSZ);
|
|
}
|
|
|
|
static inline u16 musb_read_txfifoadd(void __iomem *mbase)
|
|
{
|
|
return musb_readw(mbase, MUSB_TXFIFOADD);
|
|
}
|
|
|
|
static inline u8 musb_read_rxfifosz(void __iomem *mbase)
|
|
{
|
|
return musb_readb(mbase, MUSB_RXFIFOSZ);
|
|
}
|
|
|
|
static inline u16 musb_read_rxfifoadd(void __iomem *mbase)
|
|
{
|
|
return musb_readw(mbase, MUSB_RXFIFOADD);
|
|
}
|
|
|
|
static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
|
|
{
|
|
return musb_readb(mbase, MUSB_ULPI_BUSCONTROL);
|
|
}
|
|
|
|
static inline u8 musb_read_configdata(void __iomem *mbase)
|
|
{
|
|
musb_writeb(mbase, MUSB_INDEX, 0);
|
|
return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
|
|
}
|
|
|
|
static inline u16 musb_read_hwvers(void __iomem *mbase)
|
|
{
|
|
return musb_readw(mbase, MUSB_HWVERS);
|
|
}
|
|
|
|
static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase)
|
|
{
|
|
return (MUSB_BUSCTL_OFFSET(i, 0) + mbase);
|
|
}
|
|
|
|
static inline void musb_write_rxfunaddr(void __iomem *ep_target_regs,
|
|
u8 qh_addr_reg)
|
|
{
|
|
musb_writeb(ep_target_regs, MUSB_RXFUNCADDR, qh_addr_reg);
|
|
}
|
|
|
|
static inline void musb_write_rxhubaddr(void __iomem *ep_target_regs,
|
|
u8 qh_h_addr_reg)
|
|
{
|
|
musb_writeb(ep_target_regs, MUSB_RXHUBADDR, qh_h_addr_reg);
|
|
}
|
|
|
|
static inline void musb_write_rxhubport(void __iomem *ep_target_regs,
|
|
u8 qh_h_port_reg)
|
|
{
|
|
musb_writeb(ep_target_regs, MUSB_RXHUBPORT, qh_h_port_reg);
|
|
}
|
|
|
|
static inline void musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
|
|
u8 qh_addr_reg)
|
|
{
|
|
musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR),
|
|
qh_addr_reg);
|
|
}
|
|
|
|
static inline void musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
|
|
u8 qh_addr_reg)
|
|
{
|
|
musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR),
|
|
qh_addr_reg);
|
|
}
|
|
|
|
static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum,
|
|
u8 qh_h_port_reg)
|
|
{
|
|
musb_writeb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT),
|
|
qh_h_port_reg);
|
|
}
|
|
|
|
static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
|
|
{
|
|
return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXFUNCADDR));
|
|
}
|
|
|
|
static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
|
|
{
|
|
return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBADDR));
|
|
}
|
|
|
|
static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
|
|
{
|
|
return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_RXHUBPORT));
|
|
}
|
|
|
|
static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
|
|
{
|
|
return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXFUNCADDR));
|
|
}
|
|
|
|
static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
|
|
{
|
|
return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBADDR));
|
|
}
|
|
|
|
static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
|
|
{
|
|
return musb_readb(mbase, MUSB_BUSCTL_OFFSET(epnum, MUSB_TXHUBPORT));
|
|
}
|
|
|
|
#else /* CONFIG_BLACKFIN */
|
|
|
|
#define USB_BASE USB_FADDR
|
|
#define USB_OFFSET(reg) (reg - USB_BASE)
|
|
|
|
/*
|
|
* Common USB registers
|
|
*/
|
|
#define MUSB_FADDR USB_OFFSET(USB_FADDR) /* 8-bit */
|
|
#define MUSB_POWER USB_OFFSET(USB_POWER) /* 8-bit */
|
|
#define MUSB_INTRTX USB_OFFSET(USB_INTRTX) /* 16-bit */
|
|
#define MUSB_INTRRX USB_OFFSET(USB_INTRRX)
|
|
#define MUSB_INTRTXE USB_OFFSET(USB_INTRTXE)
|
|
#define MUSB_INTRRXE USB_OFFSET(USB_INTRRXE)
|
|
#define MUSB_INTRUSB USB_OFFSET(USB_INTRUSB) /* 8 bit */
|
|
#define MUSB_INTRUSBE USB_OFFSET(USB_INTRUSBE)/* 8 bit */
|
|
#define MUSB_FRAME USB_OFFSET(USB_FRAME)
|
|
#define MUSB_INDEX USB_OFFSET(USB_INDEX) /* 8 bit */
|
|
#define MUSB_TESTMODE USB_OFFSET(USB_TESTMODE)/* 8 bit */
|
|
|
|
/*
|
|
* Additional Control Registers
|
|
*/
|
|
|
|
#define MUSB_DEVCTL USB_OFFSET(USB_OTG_DEV_CTL) /* 8 bit */
|
|
|
|
#define MUSB_LINKINFO USB_OFFSET(USB_LINKINFO)/* 8 bit */
|
|
#define MUSB_VPLEN USB_OFFSET(USB_VPLEN) /* 8 bit */
|
|
#define MUSB_HS_EOF1 USB_OFFSET(USB_HS_EOF1) /* 8 bit */
|
|
#define MUSB_FS_EOF1 USB_OFFSET(USB_FS_EOF1) /* 8 bit */
|
|
#define MUSB_LS_EOF1 USB_OFFSET(USB_LS_EOF1) /* 8 bit */
|
|
|
|
/* Offsets to endpoint registers */
|
|
#define MUSB_TXMAXP 0x00
|
|
#define MUSB_TXCSR 0x04
|
|
#define MUSB_CSR0 MUSB_TXCSR /* Re-used for EP0 */
|
|
#define MUSB_RXMAXP 0x08
|
|
#define MUSB_RXCSR 0x0C
|
|
#define MUSB_RXCOUNT 0x10
|
|
#define MUSB_COUNT0 MUSB_RXCOUNT /* Re-used for EP0 */
|
|
#define MUSB_TXTYPE 0x14
|
|
#define MUSB_TYPE0 MUSB_TXTYPE /* Re-used for EP0 */
|
|
#define MUSB_TXINTERVAL 0x18
|
|
#define MUSB_NAKLIMIT0 MUSB_TXINTERVAL /* Re-used for EP0 */
|
|
#define MUSB_RXTYPE 0x1C
|
|
#define MUSB_RXINTERVAL 0x20
|
|
#define MUSB_TXCOUNT 0x28
|
|
|
|
/* Offsets to endpoint registers in indexed model (using INDEX register) */
|
|
#define MUSB_INDEXED_OFFSET(_epnum, _offset) \
|
|
(0x40 + (_offset))
|
|
|
|
/* Offsets to endpoint registers in flat models */
|
|
#define MUSB_FLAT_OFFSET(_epnum, _offset) \
|
|
(USB_OFFSET(USB_EP_NI0_TXMAXP) + (0x40 * (_epnum)) + (_offset))
|
|
|
|
/* Not implemented - HW has separate Tx/Rx FIFO */
|
|
#define MUSB_TXCSR_MODE 0x0000
|
|
|
|
static inline void musb_write_txfifosz(void __iomem *mbase, u8 c_size)
|
|
{
|
|
}
|
|
|
|
static inline void musb_write_txfifoadd(void __iomem *mbase, u16 c_off)
|
|
{
|
|
}
|
|
|
|
static inline void musb_write_rxfifosz(void __iomem *mbase, u8 c_size)
|
|
{
|
|
}
|
|
|
|
static inline void musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
|
|
{
|
|
}
|
|
|
|
static inline void musb_write_ulpi_buscontrol(void __iomem *mbase, u8 val)
|
|
{
|
|
}
|
|
|
|
static inline u8 musb_read_txfifosz(void __iomem *mbase)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline u16 musb_read_txfifoadd(void __iomem *mbase)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline u8 musb_read_rxfifosz(void __iomem *mbase)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline u16 musb_read_rxfifoadd(void __iomem *mbase)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline u8 musb_read_ulpi_buscontrol(void __iomem *mbase)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline u8 musb_read_configdata(void __iomem *mbase)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline u16 musb_read_hwvers(void __iomem *mbase)
|
|
{
|
|
/*
|
|
* This register is invisible on Blackfin, actually the MUSB
|
|
* RTL version of Blackfin is 1.9, so just hardcode its value.
|
|
*/
|
|
return MUSB_HWVERS_1900;
|
|
}
|
|
|
|
static inline void __iomem *musb_read_target_reg_base(u8 i, void __iomem *mbase)
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
static inline void musb_write_rxfunaddr(void __iomem *ep_target_regs,
|
|
u8 qh_addr_req)
|
|
{
|
|
}
|
|
|
|
static inline void musb_write_rxhubaddr(void __iomem *ep_target_regs,
|
|
u8 qh_h_addr_reg)
|
|
{
|
|
}
|
|
|
|
static inline void musb_write_rxhubport(void __iomem *ep_target_regs,
|
|
u8 qh_h_port_reg)
|
|
{
|
|
}
|
|
|
|
static inline void musb_write_txfunaddr(void __iomem *mbase, u8 epnum,
|
|
u8 qh_addr_reg)
|
|
{
|
|
}
|
|
|
|
static inline void musb_write_txhubaddr(void __iomem *mbase, u8 epnum,
|
|
u8 qh_addr_reg)
|
|
{
|
|
}
|
|
|
|
static inline void musb_write_txhubport(void __iomem *mbase, u8 epnum,
|
|
u8 qh_h_port_reg)
|
|
{
|
|
}
|
|
|
|
static inline u8 musb_read_rxfunaddr(void __iomem *mbase, u8 epnum)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline u8 musb_read_rxhubaddr(void __iomem *mbase, u8 epnum)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline u8 musb_read_rxhubport(void __iomem *mbase, u8 epnum)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline u8 musb_read_txfunaddr(void __iomem *mbase, u8 epnum)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline u8 musb_read_txhubaddr(void __iomem *mbase, u8 epnum)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline u8 musb_read_txhubport(void __iomem *mbase, u8 epnum)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_BLACKFIN */
|
|
|
|
#endif /* __MUSB_REGS_H__ */
|