mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-29 07:34:06 +08:00
e85e335f8f
MMUv3 comes out of reset with identity vaddr -> paddr mapping in the TLB
way 6:
Way 6 (512 MB)
Vaddr Paddr ASID Attr RWX Cache
---------- ---------- ---- ---- --- -------
0x00000000 0x00000000 0x01 0x03 RWX Bypass
0x20000000 0x20000000 0x01 0x03 RWX Bypass
0x40000000 0x40000000 0x01 0x03 RWX Bypass
0x60000000 0x60000000 0x01 0x03 RWX Bypass
0x80000000 0x80000000 0x01 0x03 RWX Bypass
0xa0000000 0xa0000000 0x01 0x03 RWX Bypass
0xc0000000 0xc0000000 0x01 0x03 RWX Bypass
0xe0000000 0xe0000000 0x01 0x03 RWX Bypass
This patch adds remapping code at the reset vector or at the kernel
_start (depending on CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX) that
reconfigures MMUv3 as MMUv2:
Way 5 (128 MB)
Vaddr Paddr ASID Attr RWX Cache
---------- ---------- ---- ---- --- -------
0xd0000000 0x00000000 0x01 0x07 RWX WB
0xd8000000 0x00000000 0x01 0x03 RWX Bypass
Way 6 (256 MB)
Vaddr Paddr ASID Attr RWX Cache
---------- ---------- ---- ---- --- -------
0xe0000000 0xf0000000 0x01 0x07 RWX WB
0xf0000000 0xf0000000 0x01 0x03 RWX Bypass
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Chris Zankel <chris@zankel.net>
274 lines
5.3 KiB
ArmAsm
274 lines
5.3 KiB
ArmAsm
/*
|
|
* arch/xtensa/kernel/head.S
|
|
*
|
|
* Xtensa Processor startup code.
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*
|
|
* Copyright (C) 2001 - 2008 Tensilica Inc.
|
|
*
|
|
* Chris Zankel <chris@zankel.net>
|
|
* Marc Gauthier <marc@tensilica.com, marc@alumni.uwaterloo.ca>
|
|
* Joe Taylor <joe@tensilica.com, joetylr@yahoo.com>
|
|
* Kevin Chea
|
|
*/
|
|
|
|
#include <asm/processor.h>
|
|
#include <asm/page.h>
|
|
#include <asm/cacheasm.h>
|
|
#include <asm/initialize_mmu.h>
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/linkage.h>
|
|
|
|
/*
|
|
* This module contains the entry code for kernel images. It performs the
|
|
* minimal setup needed to call the generic C routines.
|
|
*
|
|
* Prerequisites:
|
|
*
|
|
* - The kernel image has been loaded to the actual address where it was
|
|
* compiled to.
|
|
* - a2 contains either 0 or a pointer to a list of boot parameters.
|
|
* (see setup.c for more details)
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* _start
|
|
*
|
|
* The bootloader passes a pointer to a list of boot parameters in a2.
|
|
*/
|
|
|
|
/* The first bytes of the kernel image must be an instruction, so we
|
|
* manually allocate and define the literal constant we need for a jx
|
|
* instruction.
|
|
*/
|
|
|
|
__HEAD
|
|
.begin no-absolute-literals
|
|
|
|
ENTRY(_start)
|
|
|
|
/* Preserve the pointer to the boot parameter list in EXCSAVE_1 */
|
|
wsr a2, excsave1
|
|
_j _SetupMMU
|
|
|
|
.align 4
|
|
.literal_position
|
|
.Lstartup:
|
|
.word _startup
|
|
|
|
.align 4
|
|
.global _SetupMMU
|
|
_SetupMMU:
|
|
Offset = _SetupMMU - _start
|
|
|
|
#ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX
|
|
initialize_mmu
|
|
#endif
|
|
.end no-absolute-literals
|
|
|
|
l32r a0, .Lstartup
|
|
jx a0
|
|
|
|
ENDPROC(_start)
|
|
|
|
__INIT
|
|
.literal_position
|
|
|
|
ENTRY(_startup)
|
|
|
|
/* Disable interrupts and exceptions. */
|
|
|
|
movi a0, LOCKLEVEL
|
|
wsr a0, ps
|
|
|
|
/* Start with a fresh windowbase and windowstart. */
|
|
|
|
movi a1, 1
|
|
movi a0, 0
|
|
wsr a1, windowstart
|
|
wsr a0, windowbase
|
|
rsync
|
|
|
|
/* Set a0 to 0 for the remaining initialization. */
|
|
|
|
movi a0, 0
|
|
|
|
/* Clear debugging registers. */
|
|
|
|
#if XCHAL_HAVE_DEBUG
|
|
#if XCHAL_NUM_IBREAK > 0
|
|
wsr a0, ibreakenable
|
|
#endif
|
|
wsr a0, icount
|
|
movi a1, 15
|
|
wsr a0, icountlevel
|
|
|
|
.set _index, 0
|
|
.rept XCHAL_NUM_DBREAK - 1
|
|
wsr a0, SREG_DBREAKC + _index
|
|
.set _index, _index + 1
|
|
.endr
|
|
#endif
|
|
|
|
/* Clear CCOUNT (not really necessary, but nice) */
|
|
|
|
wsr a0, ccount # not really necessary, but nice
|
|
|
|
/* Disable zero-loops. */
|
|
|
|
#if XCHAL_HAVE_LOOPS
|
|
wsr a0, lcount
|
|
#endif
|
|
|
|
/* Disable all timers. */
|
|
|
|
.set _index, 0
|
|
.rept XCHAL_NUM_TIMERS
|
|
wsr a0, SREG_CCOMPARE + _index
|
|
.set _index, _index + 1
|
|
.endr
|
|
|
|
/* Interrupt initialization. */
|
|
|
|
movi a2, XCHAL_INTTYPE_MASK_SOFTWARE | XCHAL_INTTYPE_MASK_EXTERN_EDGE
|
|
wsr a0, intenable
|
|
wsr a2, intclear
|
|
|
|
/* Disable coprocessors. */
|
|
|
|
#if XCHAL_HAVE_CP
|
|
wsr a0, cpenable
|
|
#endif
|
|
|
|
/* Set PS.INTLEVEL=LOCKLEVEL, PS.WOE=0, kernel stack, PS.EXCM=0
|
|
*
|
|
* Note: PS.EXCM must be cleared before using any loop
|
|
* instructions; otherwise, they are silently disabled, and
|
|
* at most one iteration of the loop is executed.
|
|
*/
|
|
|
|
movi a1, LOCKLEVEL
|
|
wsr a1, ps
|
|
rsync
|
|
|
|
/* Initialize the caches.
|
|
* a2, a3 are just working registers (clobbered).
|
|
*/
|
|
|
|
#if XCHAL_DCACHE_LINE_LOCKABLE
|
|
___unlock_dcache_all a2 a3
|
|
#endif
|
|
|
|
#if XCHAL_ICACHE_LINE_LOCKABLE
|
|
___unlock_icache_all a2 a3
|
|
#endif
|
|
|
|
___invalidate_dcache_all a2 a3
|
|
___invalidate_icache_all a2 a3
|
|
|
|
isync
|
|
|
|
/* Unpack data sections
|
|
*
|
|
* The linker script used to build the Linux kernel image
|
|
* creates a table located at __boot_reloc_table_start
|
|
* that contans the information what data needs to be unpacked.
|
|
*
|
|
* Uses a2-a7.
|
|
*/
|
|
|
|
movi a2, __boot_reloc_table_start
|
|
movi a3, __boot_reloc_table_end
|
|
|
|
1: beq a2, a3, 3f # no more entries?
|
|
l32i a4, a2, 0 # start destination (in RAM)
|
|
l32i a5, a2, 4 # end desination (in RAM)
|
|
l32i a6, a2, 8 # start source (in ROM)
|
|
addi a2, a2, 12 # next entry
|
|
beq a4, a5, 1b # skip, empty entry
|
|
beq a4, a6, 1b # skip, source and dest. are the same
|
|
|
|
2: l32i a7, a6, 0 # load word
|
|
addi a6, a6, 4
|
|
s32i a7, a4, 0 # store word
|
|
addi a4, a4, 4
|
|
bltu a4, a5, 2b
|
|
j 1b
|
|
|
|
3:
|
|
/* All code and initialized data segments have been copied.
|
|
* Now clear the BSS segment.
|
|
*/
|
|
|
|
movi a2, __bss_start # start of BSS
|
|
movi a3, __bss_stop # end of BSS
|
|
|
|
__loopt a2, a3, a4, 2
|
|
s32i a0, a2, 0
|
|
__endla a2, a4, 4
|
|
|
|
#if XCHAL_DCACHE_IS_WRITEBACK
|
|
|
|
/* After unpacking, flush the writeback cache to memory so the
|
|
* instructions/data are available.
|
|
*/
|
|
|
|
___flush_dcache_all a2 a3
|
|
#endif
|
|
memw
|
|
isync
|
|
___invalidate_icache_all a2 a3
|
|
isync
|
|
|
|
/* Setup stack and enable window exceptions (keep irqs disabled) */
|
|
|
|
movi a1, init_thread_union
|
|
addi a1, a1, KERNEL_STACK_SIZE
|
|
|
|
movi a2, (1 << PS_WOE_BIT) | LOCKLEVEL
|
|
# WOE=1, INTLEVEL=LOCKLEVEL, UM=0
|
|
wsr a2, ps # (enable reg-windows; progmode stack)
|
|
rsync
|
|
|
|
/* Set up EXCSAVE[DEBUGLEVEL] to point to the Debug Exception Handler.*/
|
|
|
|
movi a2, debug_exception
|
|
wsr a2, SREG_EXCSAVE + XCHAL_DEBUGLEVEL
|
|
|
|
/* Set up EXCSAVE[1] to point to the exc_table. */
|
|
|
|
movi a6, exc_table
|
|
xsr a6, excsave1
|
|
|
|
/* init_arch kick-starts the linux kernel */
|
|
|
|
movi a4, init_arch
|
|
callx4 a4
|
|
|
|
movi a4, start_kernel
|
|
callx4 a4
|
|
|
|
should_never_return:
|
|
j should_never_return
|
|
|
|
ENDPROC(_startup)
|
|
|
|
/*
|
|
* BSS section
|
|
*/
|
|
|
|
__PAGE_ALIGNED_BSS
|
|
#ifdef CONFIG_MMU
|
|
ENTRY(swapper_pg_dir)
|
|
.fill PAGE_SIZE, 1, 0
|
|
END(swapper_pg_dir)
|
|
#endif
|
|
ENTRY(empty_zero_page)
|
|
.fill PAGE_SIZE, 1, 0
|
|
END(empty_zero_page)
|