mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-26 22:24:09 +08:00
c5c3a6d8fe
To make UML build and run on s390, I needed to do these two little changes: 1) UML includes some of the subarch's (s390) headers. I had to change one of them with the following one-liner, to make this compile. AFAICS, this change doesn't break compilation of s390 itself. 2) UML needs to intercept syscalls via ptrace to invalidate the syscall, read syscall's parameters and write the result with the result of UML's syscall processing. Also, UML needs to make sure, that the host does no syscall restart processing. On i386 for example, this can be done by writing -1 to orig_eax on the 2nd syscall interception (orig_eax is the syscall number, which after the interception is used as a "interrupt was a syscall" flag only. Unfortunately, s390 holds syscall number and syscall result in gpr2 and its "interrupt was a syscall" flag (trap) is unreachable via ptrace. So I changed the host to set trap to -1, if the syscall number is changed to an invalid value on the first syscall interception. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
786 lines
22 KiB
C
786 lines
22 KiB
C
/*
|
|
* arch/s390/kernel/ptrace.c
|
|
*
|
|
* S390 version
|
|
* Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
|
|
* Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com),
|
|
* Martin Schwidefsky (schwidefsky@de.ibm.com)
|
|
*
|
|
* Based on PowerPC version
|
|
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
|
|
*
|
|
* Derived from "arch/m68k/kernel/ptrace.c"
|
|
* Copyright (C) 1994 by Hamish Macdonald
|
|
* Taken from linux/kernel/ptrace.c and modified for M680x0.
|
|
* linux/kernel/ptrace.c is by Ross Biro 1/23/92, edited by Linus Torvalds
|
|
*
|
|
* Modified by Cort Dougan (cort@cs.nmt.edu)
|
|
*
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General
|
|
* Public License. See the file README.legal in the main directory of
|
|
* this archive for more details.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/smp_lock.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/user.h>
|
|
#include <linux/security.h>
|
|
#include <linux/audit.h>
|
|
#include <linux/signal.h>
|
|
|
|
#include <asm/segment.h>
|
|
#include <asm/page.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/pgalloc.h>
|
|
#include <asm/system.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/unistd.h>
|
|
|
|
#ifdef CONFIG_S390_SUPPORT
|
|
#include "compat_ptrace.h"
|
|
#endif
|
|
|
|
static void
|
|
FixPerRegisters(struct task_struct *task)
|
|
{
|
|
struct pt_regs *regs;
|
|
per_struct *per_info;
|
|
|
|
regs = __KSTK_PTREGS(task);
|
|
per_info = (per_struct *) &task->thread.per_info;
|
|
per_info->control_regs.bits.em_instruction_fetch =
|
|
per_info->single_step | per_info->instruction_fetch;
|
|
|
|
if (per_info->single_step) {
|
|
per_info->control_regs.bits.starting_addr = 0;
|
|
#ifdef CONFIG_S390_SUPPORT
|
|
if (test_thread_flag(TIF_31BIT))
|
|
per_info->control_regs.bits.ending_addr = 0x7fffffffUL;
|
|
else
|
|
#endif
|
|
per_info->control_regs.bits.ending_addr = PSW_ADDR_INSN;
|
|
} else {
|
|
per_info->control_regs.bits.starting_addr =
|
|
per_info->starting_addr;
|
|
per_info->control_regs.bits.ending_addr =
|
|
per_info->ending_addr;
|
|
}
|
|
/*
|
|
* if any of the control reg tracing bits are on
|
|
* we switch on per in the psw
|
|
*/
|
|
if (per_info->control_regs.words.cr[0] & PER_EM_MASK)
|
|
regs->psw.mask |= PSW_MASK_PER;
|
|
else
|
|
regs->psw.mask &= ~PSW_MASK_PER;
|
|
|
|
if (per_info->control_regs.bits.em_storage_alteration)
|
|
per_info->control_regs.bits.storage_alt_space_ctl = 1;
|
|
else
|
|
per_info->control_regs.bits.storage_alt_space_ctl = 0;
|
|
}
|
|
|
|
void
|
|
set_single_step(struct task_struct *task)
|
|
{
|
|
task->thread.per_info.single_step = 1;
|
|
FixPerRegisters(task);
|
|
}
|
|
|
|
void
|
|
clear_single_step(struct task_struct *task)
|
|
{
|
|
task->thread.per_info.single_step = 0;
|
|
FixPerRegisters(task);
|
|
}
|
|
|
|
/*
|
|
* Called by kernel/ptrace.c when detaching..
|
|
*
|
|
* Make sure single step bits etc are not set.
|
|
*/
|
|
void
|
|
ptrace_disable(struct task_struct *child)
|
|
{
|
|
/* make sure the single step bit is not set. */
|
|
clear_single_step(child);
|
|
}
|
|
|
|
#ifndef CONFIG_ARCH_S390X
|
|
# define __ADDR_MASK 3
|
|
#else
|
|
# define __ADDR_MASK 7
|
|
#endif
|
|
|
|
/*
|
|
* Read the word at offset addr from the user area of a process. The
|
|
* trouble here is that the information is littered over different
|
|
* locations. The process registers are found on the kernel stack,
|
|
* the floating point stuff and the trace settings are stored in
|
|
* the task structure. In addition the different structures in
|
|
* struct user contain pad bytes that should be read as zeroes.
|
|
* Lovely...
|
|
*/
|
|
static int
|
|
peek_user(struct task_struct *child, addr_t addr, addr_t data)
|
|
{
|
|
struct user *dummy = NULL;
|
|
addr_t offset, tmp, mask;
|
|
|
|
/*
|
|
* Stupid gdb peeks/pokes the access registers in 64 bit with
|
|
* an alignment of 4. Programmers from hell...
|
|
*/
|
|
mask = __ADDR_MASK;
|
|
#ifdef CONFIG_ARCH_S390X
|
|
if (addr >= (addr_t) &dummy->regs.acrs &&
|
|
addr < (addr_t) &dummy->regs.orig_gpr2)
|
|
mask = 3;
|
|
#endif
|
|
if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK)
|
|
return -EIO;
|
|
|
|
if (addr < (addr_t) &dummy->regs.acrs) {
|
|
/*
|
|
* psw and gprs are stored on the stack
|
|
*/
|
|
tmp = *(addr_t *)((addr_t) &__KSTK_PTREGS(child)->psw + addr);
|
|
if (addr == (addr_t) &dummy->regs.psw.mask)
|
|
/* Remove per bit from user psw. */
|
|
tmp &= ~PSW_MASK_PER;
|
|
|
|
} else if (addr < (addr_t) &dummy->regs.orig_gpr2) {
|
|
/*
|
|
* access registers are stored in the thread structure
|
|
*/
|
|
offset = addr - (addr_t) &dummy->regs.acrs;
|
|
#ifdef CONFIG_ARCH_S390X
|
|
/*
|
|
* Very special case: old & broken 64 bit gdb reading
|
|
* from acrs[15]. Result is a 64 bit value. Read the
|
|
* 32 bit acrs[15] value and shift it by 32. Sick...
|
|
*/
|
|
if (addr == (addr_t) &dummy->regs.acrs[15])
|
|
tmp = ((unsigned long) child->thread.acrs[15]) << 32;
|
|
else
|
|
#endif
|
|
tmp = *(addr_t *)((addr_t) &child->thread.acrs + offset);
|
|
|
|
} else if (addr == (addr_t) &dummy->regs.orig_gpr2) {
|
|
/*
|
|
* orig_gpr2 is stored on the kernel stack
|
|
*/
|
|
tmp = (addr_t) __KSTK_PTREGS(child)->orig_gpr2;
|
|
|
|
} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
|
|
/*
|
|
* floating point regs. are stored in the thread structure
|
|
*/
|
|
offset = addr - (addr_t) &dummy->regs.fp_regs;
|
|
tmp = *(addr_t *)((addr_t) &child->thread.fp_regs + offset);
|
|
if (addr == (addr_t) &dummy->regs.fp_regs.fpc)
|
|
tmp &= (unsigned long) FPC_VALID_MASK
|
|
<< (BITS_PER_LONG - 32);
|
|
|
|
} else if (addr < (addr_t) (&dummy->regs.per_info + 1)) {
|
|
/*
|
|
* per_info is found in the thread structure
|
|
*/
|
|
offset = addr - (addr_t) &dummy->regs.per_info;
|
|
tmp = *(addr_t *)((addr_t) &child->thread.per_info + offset);
|
|
|
|
} else
|
|
tmp = 0;
|
|
|
|
return put_user(tmp, (addr_t __user *) data);
|
|
}
|
|
|
|
/*
|
|
* Write a word to the user area of a process at location addr. This
|
|
* operation does have an additional problem compared to peek_user.
|
|
* Stores to the program status word and on the floating point
|
|
* control register needs to get checked for validity.
|
|
*/
|
|
static int
|
|
poke_user(struct task_struct *child, addr_t addr, addr_t data)
|
|
{
|
|
struct user *dummy = NULL;
|
|
addr_t offset, mask;
|
|
|
|
/*
|
|
* Stupid gdb peeks/pokes the access registers in 64 bit with
|
|
* an alignment of 4. Programmers from hell indeed...
|
|
*/
|
|
mask = __ADDR_MASK;
|
|
#ifdef CONFIG_ARCH_S390X
|
|
if (addr >= (addr_t) &dummy->regs.acrs &&
|
|
addr < (addr_t) &dummy->regs.orig_gpr2)
|
|
mask = 3;
|
|
#endif
|
|
if ((addr & mask) || addr > sizeof(struct user) - __ADDR_MASK)
|
|
return -EIO;
|
|
|
|
if (addr < (addr_t) &dummy->regs.acrs) {
|
|
/*
|
|
* psw and gprs are stored on the stack
|
|
*/
|
|
if (addr == (addr_t) &dummy->regs.psw.mask &&
|
|
#ifdef CONFIG_S390_SUPPORT
|
|
data != PSW_MASK_MERGE(PSW_USER32_BITS, data) &&
|
|
#endif
|
|
data != PSW_MASK_MERGE(PSW_USER_BITS, data))
|
|
/* Invalid psw mask. */
|
|
return -EINVAL;
|
|
#ifndef CONFIG_ARCH_S390X
|
|
if (addr == (addr_t) &dummy->regs.psw.addr)
|
|
/* I'd like to reject addresses without the
|
|
high order bit but older gdb's rely on it */
|
|
data |= PSW_ADDR_AMODE;
|
|
#endif
|
|
*(addr_t *)((addr_t) &__KSTK_PTREGS(child)->psw + addr) = data;
|
|
|
|
} else if (addr < (addr_t) (&dummy->regs.orig_gpr2)) {
|
|
/*
|
|
* access registers are stored in the thread structure
|
|
*/
|
|
offset = addr - (addr_t) &dummy->regs.acrs;
|
|
#ifdef CONFIG_ARCH_S390X
|
|
/*
|
|
* Very special case: old & broken 64 bit gdb writing
|
|
* to acrs[15] with a 64 bit value. Ignore the lower
|
|
* half of the value and write the upper 32 bit to
|
|
* acrs[15]. Sick...
|
|
*/
|
|
if (addr == (addr_t) &dummy->regs.acrs[15])
|
|
child->thread.acrs[15] = (unsigned int) (data >> 32);
|
|
else
|
|
#endif
|
|
*(addr_t *)((addr_t) &child->thread.acrs + offset) = data;
|
|
|
|
} else if (addr == (addr_t) &dummy->regs.orig_gpr2) {
|
|
/*
|
|
* orig_gpr2 is stored on the kernel stack
|
|
*/
|
|
__KSTK_PTREGS(child)->orig_gpr2 = data;
|
|
|
|
} else if (addr < (addr_t) (&dummy->regs.fp_regs + 1)) {
|
|
/*
|
|
* floating point regs. are stored in the thread structure
|
|
*/
|
|
if (addr == (addr_t) &dummy->regs.fp_regs.fpc &&
|
|
(data & ~((unsigned long) FPC_VALID_MASK
|
|
<< (BITS_PER_LONG - 32))) != 0)
|
|
return -EINVAL;
|
|
offset = addr - (addr_t) &dummy->regs.fp_regs;
|
|
*(addr_t *)((addr_t) &child->thread.fp_regs + offset) = data;
|
|
|
|
} else if (addr < (addr_t) (&dummy->regs.per_info + 1)) {
|
|
/*
|
|
* per_info is found in the thread structure
|
|
*/
|
|
offset = addr - (addr_t) &dummy->regs.per_info;
|
|
*(addr_t *)((addr_t) &child->thread.per_info + offset) = data;
|
|
|
|
}
|
|
|
|
FixPerRegisters(child);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
do_ptrace_normal(struct task_struct *child, long request, long addr, long data)
|
|
{
|
|
unsigned long tmp;
|
|
ptrace_area parea;
|
|
int copied, ret;
|
|
|
|
switch (request) {
|
|
case PTRACE_PEEKTEXT:
|
|
case PTRACE_PEEKDATA:
|
|
/* Remove high order bit from address (only for 31 bit). */
|
|
addr &= PSW_ADDR_INSN;
|
|
/* read word at location addr. */
|
|
copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
|
|
if (copied != sizeof(tmp))
|
|
return -EIO;
|
|
return put_user(tmp, (unsigned long __user *) data);
|
|
|
|
case PTRACE_PEEKUSR:
|
|
/* read the word at location addr in the USER area. */
|
|
return peek_user(child, addr, data);
|
|
|
|
case PTRACE_POKETEXT:
|
|
case PTRACE_POKEDATA:
|
|
/* Remove high order bit from address (only for 31 bit). */
|
|
addr &= PSW_ADDR_INSN;
|
|
/* write the word at location addr. */
|
|
copied = access_process_vm(child, addr, &data, sizeof(data),1);
|
|
if (copied != sizeof(data))
|
|
return -EIO;
|
|
return 0;
|
|
|
|
case PTRACE_POKEUSR:
|
|
/* write the word at location addr in the USER area */
|
|
return poke_user(child, addr, data);
|
|
|
|
case PTRACE_PEEKUSR_AREA:
|
|
case PTRACE_POKEUSR_AREA:
|
|
if (copy_from_user(&parea, (void __user *) addr,
|
|
sizeof(parea)))
|
|
return -EFAULT;
|
|
addr = parea.kernel_addr;
|
|
data = parea.process_addr;
|
|
copied = 0;
|
|
while (copied < parea.len) {
|
|
if (request == PTRACE_PEEKUSR_AREA)
|
|
ret = peek_user(child, addr, data);
|
|
else {
|
|
addr_t tmp;
|
|
if (get_user (tmp, (addr_t __user *) data))
|
|
return -EFAULT;
|
|
ret = poke_user(child, addr, tmp);
|
|
}
|
|
if (ret)
|
|
return ret;
|
|
addr += sizeof(unsigned long);
|
|
data += sizeof(unsigned long);
|
|
copied += sizeof(unsigned long);
|
|
}
|
|
return 0;
|
|
}
|
|
return ptrace_request(child, request, addr, data);
|
|
}
|
|
|
|
#ifdef CONFIG_S390_SUPPORT
|
|
/*
|
|
* Now the fun part starts... a 31 bit program running in the
|
|
* 31 bit emulation tracing another program. PTRACE_PEEKTEXT,
|
|
* PTRACE_PEEKDATA, PTRACE_POKETEXT and PTRACE_POKEDATA are easy
|
|
* to handle, the difference to the 64 bit versions of the requests
|
|
* is that the access is done in multiples of 4 byte instead of
|
|
* 8 bytes (sizeof(unsigned long) on 31/64 bit).
|
|
* The ugly part are PTRACE_PEEKUSR, PTRACE_PEEKUSR_AREA,
|
|
* PTRACE_POKEUSR and PTRACE_POKEUSR_AREA. If the traced program
|
|
* is a 31 bit program too, the content of struct user can be
|
|
* emulated. A 31 bit program peeking into the struct user of
|
|
* a 64 bit program is a no-no.
|
|
*/
|
|
|
|
/*
|
|
* Same as peek_user but for a 31 bit program.
|
|
*/
|
|
static int
|
|
peek_user_emu31(struct task_struct *child, addr_t addr, addr_t data)
|
|
{
|
|
struct user32 *dummy32 = NULL;
|
|
per_struct32 *dummy_per32 = NULL;
|
|
addr_t offset;
|
|
__u32 tmp;
|
|
|
|
if (!test_thread_flag(TIF_31BIT) ||
|
|
(addr & 3) || addr > sizeof(struct user) - 3)
|
|
return -EIO;
|
|
|
|
if (addr < (addr_t) &dummy32->regs.acrs) {
|
|
/*
|
|
* psw and gprs are stored on the stack
|
|
*/
|
|
if (addr == (addr_t) &dummy32->regs.psw.mask) {
|
|
/* Fake a 31 bit psw mask. */
|
|
tmp = (__u32)(__KSTK_PTREGS(child)->psw.mask >> 32);
|
|
tmp = PSW32_MASK_MERGE(PSW32_USER_BITS, tmp);
|
|
} else if (addr == (addr_t) &dummy32->regs.psw.addr) {
|
|
/* Fake a 31 bit psw address. */
|
|
tmp = (__u32) __KSTK_PTREGS(child)->psw.addr |
|
|
PSW32_ADDR_AMODE31;
|
|
} else {
|
|
/* gpr 0-15 */
|
|
tmp = *(__u32 *)((addr_t) &__KSTK_PTREGS(child)->psw +
|
|
addr*2 + 4);
|
|
}
|
|
} else if (addr < (addr_t) (&dummy32->regs.orig_gpr2)) {
|
|
/*
|
|
* access registers are stored in the thread structure
|
|
*/
|
|
offset = addr - (addr_t) &dummy32->regs.acrs;
|
|
tmp = *(__u32*)((addr_t) &child->thread.acrs + offset);
|
|
|
|
} else if (addr == (addr_t) (&dummy32->regs.orig_gpr2)) {
|
|
/*
|
|
* orig_gpr2 is stored on the kernel stack
|
|
*/
|
|
tmp = *(__u32*)((addr_t) &__KSTK_PTREGS(child)->orig_gpr2 + 4);
|
|
|
|
} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
|
|
/*
|
|
* floating point regs. are stored in the thread structure
|
|
*/
|
|
offset = addr - (addr_t) &dummy32->regs.fp_regs;
|
|
tmp = *(__u32 *)((addr_t) &child->thread.fp_regs + offset);
|
|
|
|
} else if (addr < (addr_t) (&dummy32->regs.per_info + 1)) {
|
|
/*
|
|
* per_info is found in the thread structure
|
|
*/
|
|
offset = addr - (addr_t) &dummy32->regs.per_info;
|
|
/* This is magic. See per_struct and per_struct32. */
|
|
if ((offset >= (addr_t) &dummy_per32->control_regs &&
|
|
offset < (addr_t) (&dummy_per32->control_regs + 1)) ||
|
|
(offset >= (addr_t) &dummy_per32->starting_addr &&
|
|
offset <= (addr_t) &dummy_per32->ending_addr) ||
|
|
offset == (addr_t) &dummy_per32->lowcore.words.address)
|
|
offset = offset*2 + 4;
|
|
else
|
|
offset = offset*2;
|
|
tmp = *(__u32 *)((addr_t) &child->thread.per_info + offset);
|
|
|
|
} else
|
|
tmp = 0;
|
|
|
|
return put_user(tmp, (__u32 __user *) data);
|
|
}
|
|
|
|
/*
|
|
* Same as poke_user but for a 31 bit program.
|
|
*/
|
|
static int
|
|
poke_user_emu31(struct task_struct *child, addr_t addr, addr_t data)
|
|
{
|
|
struct user32 *dummy32 = NULL;
|
|
per_struct32 *dummy_per32 = NULL;
|
|
addr_t offset;
|
|
__u32 tmp;
|
|
|
|
if (!test_thread_flag(TIF_31BIT) ||
|
|
(addr & 3) || addr > sizeof(struct user32) - 3)
|
|
return -EIO;
|
|
|
|
tmp = (__u32) data;
|
|
|
|
if (addr < (addr_t) &dummy32->regs.acrs) {
|
|
/*
|
|
* psw, gprs, acrs and orig_gpr2 are stored on the stack
|
|
*/
|
|
if (addr == (addr_t) &dummy32->regs.psw.mask) {
|
|
/* Build a 64 bit psw mask from 31 bit mask. */
|
|
if (tmp != PSW32_MASK_MERGE(PSW32_USER_BITS, tmp))
|
|
/* Invalid psw mask. */
|
|
return -EINVAL;
|
|
__KSTK_PTREGS(child)->psw.mask =
|
|
PSW_MASK_MERGE(PSW_USER32_BITS, (__u64) tmp << 32);
|
|
} else if (addr == (addr_t) &dummy32->regs.psw.addr) {
|
|
/* Build a 64 bit psw address from 31 bit address. */
|
|
__KSTK_PTREGS(child)->psw.addr =
|
|
(__u64) tmp & PSW32_ADDR_INSN;
|
|
} else {
|
|
/* gpr 0-15 */
|
|
*(__u32*)((addr_t) &__KSTK_PTREGS(child)->psw
|
|
+ addr*2 + 4) = tmp;
|
|
}
|
|
} else if (addr < (addr_t) (&dummy32->regs.orig_gpr2)) {
|
|
/*
|
|
* access registers are stored in the thread structure
|
|
*/
|
|
offset = addr - (addr_t) &dummy32->regs.acrs;
|
|
*(__u32*)((addr_t) &child->thread.acrs + offset) = tmp;
|
|
|
|
} else if (addr == (addr_t) (&dummy32->regs.orig_gpr2)) {
|
|
/*
|
|
* orig_gpr2 is stored on the kernel stack
|
|
*/
|
|
*(__u32*)((addr_t) &__KSTK_PTREGS(child)->orig_gpr2 + 4) = tmp;
|
|
|
|
} else if (addr < (addr_t) (&dummy32->regs.fp_regs + 1)) {
|
|
/*
|
|
* floating point regs. are stored in the thread structure
|
|
*/
|
|
if (addr == (addr_t) &dummy32->regs.fp_regs.fpc &&
|
|
(tmp & ~FPC_VALID_MASK) != 0)
|
|
/* Invalid floating point control. */
|
|
return -EINVAL;
|
|
offset = addr - (addr_t) &dummy32->regs.fp_regs;
|
|
*(__u32 *)((addr_t) &child->thread.fp_regs + offset) = tmp;
|
|
|
|
} else if (addr < (addr_t) (&dummy32->regs.per_info + 1)) {
|
|
/*
|
|
* per_info is found in the thread structure.
|
|
*/
|
|
offset = addr - (addr_t) &dummy32->regs.per_info;
|
|
/*
|
|
* This is magic. See per_struct and per_struct32.
|
|
* By incident the offsets in per_struct are exactly
|
|
* twice the offsets in per_struct32 for all fields.
|
|
* The 8 byte fields need special handling though,
|
|
* because the second half (bytes 4-7) is needed and
|
|
* not the first half.
|
|
*/
|
|
if ((offset >= (addr_t) &dummy_per32->control_regs &&
|
|
offset < (addr_t) (&dummy_per32->control_regs + 1)) ||
|
|
(offset >= (addr_t) &dummy_per32->starting_addr &&
|
|
offset <= (addr_t) &dummy_per32->ending_addr) ||
|
|
offset == (addr_t) &dummy_per32->lowcore.words.address)
|
|
offset = offset*2 + 4;
|
|
else
|
|
offset = offset*2;
|
|
*(__u32 *)((addr_t) &child->thread.per_info + offset) = tmp;
|
|
|
|
}
|
|
|
|
FixPerRegisters(child);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
do_ptrace_emu31(struct task_struct *child, long request, long addr, long data)
|
|
{
|
|
unsigned int tmp; /* 4 bytes !! */
|
|
ptrace_area_emu31 parea;
|
|
int copied, ret;
|
|
|
|
switch (request) {
|
|
case PTRACE_PEEKTEXT:
|
|
case PTRACE_PEEKDATA:
|
|
/* read word at location addr. */
|
|
copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
|
|
if (copied != sizeof(tmp))
|
|
return -EIO;
|
|
return put_user(tmp, (unsigned int __user *) data);
|
|
|
|
case PTRACE_PEEKUSR:
|
|
/* read the word at location addr in the USER area. */
|
|
return peek_user_emu31(child, addr, data);
|
|
|
|
case PTRACE_POKETEXT:
|
|
case PTRACE_POKEDATA:
|
|
/* write the word at location addr. */
|
|
tmp = data;
|
|
copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 1);
|
|
if (copied != sizeof(tmp))
|
|
return -EIO;
|
|
return 0;
|
|
|
|
case PTRACE_POKEUSR:
|
|
/* write the word at location addr in the USER area */
|
|
return poke_user_emu31(child, addr, data);
|
|
|
|
case PTRACE_PEEKUSR_AREA:
|
|
case PTRACE_POKEUSR_AREA:
|
|
if (copy_from_user(&parea, (void __user *) addr,
|
|
sizeof(parea)))
|
|
return -EFAULT;
|
|
addr = parea.kernel_addr;
|
|
data = parea.process_addr;
|
|
copied = 0;
|
|
while (copied < parea.len) {
|
|
if (request == PTRACE_PEEKUSR_AREA)
|
|
ret = peek_user_emu31(child, addr, data);
|
|
else {
|
|
__u32 tmp;
|
|
if (get_user (tmp, (__u32 __user *) data))
|
|
return -EFAULT;
|
|
ret = poke_user_emu31(child, addr, tmp);
|
|
}
|
|
if (ret)
|
|
return ret;
|
|
addr += sizeof(unsigned int);
|
|
data += sizeof(unsigned int);
|
|
copied += sizeof(unsigned int);
|
|
}
|
|
return 0;
|
|
case PTRACE_GETEVENTMSG:
|
|
return put_user((__u32) child->ptrace_message,
|
|
(unsigned int __user *) data);
|
|
case PTRACE_GETSIGINFO:
|
|
if (child->last_siginfo == NULL)
|
|
return -EINVAL;
|
|
return copy_siginfo_to_user32((compat_siginfo_t __user *) data,
|
|
child->last_siginfo);
|
|
case PTRACE_SETSIGINFO:
|
|
if (child->last_siginfo == NULL)
|
|
return -EINVAL;
|
|
return copy_siginfo_from_user32(child->last_siginfo,
|
|
(compat_siginfo_t __user *) data);
|
|
}
|
|
return ptrace_request(child, request, addr, data);
|
|
}
|
|
#endif
|
|
|
|
#define PT32_IEEE_IP 0x13c
|
|
|
|
static int
|
|
do_ptrace(struct task_struct *child, long request, long addr, long data)
|
|
{
|
|
int ret;
|
|
|
|
if (request == PTRACE_ATTACH)
|
|
return ptrace_attach(child);
|
|
|
|
/*
|
|
* Special cases to get/store the ieee instructions pointer.
|
|
*/
|
|
if (child == current) {
|
|
if (request == PTRACE_PEEKUSR && addr == PT_IEEE_IP)
|
|
return peek_user(child, addr, data);
|
|
if (request == PTRACE_POKEUSR && addr == PT_IEEE_IP)
|
|
return poke_user(child, addr, data);
|
|
#ifdef CONFIG_S390_SUPPORT
|
|
if (request == PTRACE_PEEKUSR &&
|
|
addr == PT32_IEEE_IP && test_thread_flag(TIF_31BIT))
|
|
return peek_user_emu31(child, addr, data);
|
|
if (request == PTRACE_POKEUSR &&
|
|
addr == PT32_IEEE_IP && test_thread_flag(TIF_31BIT))
|
|
return poke_user_emu31(child, addr, data);
|
|
#endif
|
|
}
|
|
|
|
ret = ptrace_check_attach(child, request == PTRACE_KILL);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
switch (request) {
|
|
case PTRACE_SYSCALL:
|
|
/* continue and stop at next (return from) syscall */
|
|
case PTRACE_CONT:
|
|
/* restart after signal. */
|
|
if (!valid_signal(data))
|
|
return -EIO;
|
|
if (request == PTRACE_SYSCALL)
|
|
set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
|
|
else
|
|
clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
|
|
child->exit_code = data;
|
|
/* make sure the single step bit is not set. */
|
|
clear_single_step(child);
|
|
wake_up_process(child);
|
|
return 0;
|
|
|
|
case PTRACE_KILL:
|
|
/*
|
|
* make the child exit. Best I can do is send it a sigkill.
|
|
* perhaps it should be put in the status that it wants to
|
|
* exit.
|
|
*/
|
|
if (child->exit_state == EXIT_ZOMBIE) /* already dead */
|
|
return 0;
|
|
child->exit_code = SIGKILL;
|
|
/* make sure the single step bit is not set. */
|
|
clear_single_step(child);
|
|
wake_up_process(child);
|
|
return 0;
|
|
|
|
case PTRACE_SINGLESTEP:
|
|
/* set the trap flag. */
|
|
if (!valid_signal(data))
|
|
return -EIO;
|
|
clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
|
|
child->exit_code = data;
|
|
if (data)
|
|
set_tsk_thread_flag(child, TIF_SINGLE_STEP);
|
|
else
|
|
set_single_step(child);
|
|
/* give it a chance to run. */
|
|
wake_up_process(child);
|
|
return 0;
|
|
|
|
case PTRACE_DETACH:
|
|
/* detach a process that was attached. */
|
|
return ptrace_detach(child, data);
|
|
|
|
|
|
/* Do requests that differ for 31/64 bit */
|
|
default:
|
|
#ifdef CONFIG_S390_SUPPORT
|
|
if (test_thread_flag(TIF_31BIT))
|
|
return do_ptrace_emu31(child, request, addr, data);
|
|
#endif
|
|
return do_ptrace_normal(child, request, addr, data);
|
|
}
|
|
/* Not reached. */
|
|
return -EIO;
|
|
}
|
|
|
|
asmlinkage long
|
|
sys_ptrace(long request, long pid, long addr, long data)
|
|
{
|
|
struct task_struct *child;
|
|
int ret;
|
|
|
|
lock_kernel();
|
|
|
|
if (request == PTRACE_TRACEME) {
|
|
/* are we already being traced? */
|
|
ret = -EPERM;
|
|
if (current->ptrace & PT_PTRACED)
|
|
goto out;
|
|
ret = security_ptrace(current->parent, current);
|
|
if (ret)
|
|
goto out;
|
|
/* set the ptrace bit in the process flags. */
|
|
current->ptrace |= PT_PTRACED;
|
|
goto out;
|
|
}
|
|
|
|
ret = -EPERM;
|
|
if (pid == 1) /* you may not mess with init */
|
|
goto out;
|
|
|
|
ret = -ESRCH;
|
|
read_lock(&tasklist_lock);
|
|
child = find_task_by_pid(pid);
|
|
if (child)
|
|
get_task_struct(child);
|
|
read_unlock(&tasklist_lock);
|
|
if (!child)
|
|
goto out;
|
|
|
|
ret = do_ptrace(child, request, addr, data);
|
|
|
|
put_task_struct(child);
|
|
out:
|
|
unlock_kernel();
|
|
return ret;
|
|
}
|
|
|
|
asmlinkage void
|
|
syscall_trace(struct pt_regs *regs, int entryexit)
|
|
{
|
|
if (unlikely(current->audit_context) && entryexit)
|
|
audit_syscall_exit(current, AUDITSC_RESULT(regs->gprs[2]), regs->gprs[2]);
|
|
|
|
if (!test_thread_flag(TIF_SYSCALL_TRACE))
|
|
goto out;
|
|
if (!(current->ptrace & PT_PTRACED))
|
|
goto out;
|
|
ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD)
|
|
? 0x80 : 0));
|
|
|
|
/*
|
|
* If the debuffer has set an invalid system call number,
|
|
* we prepare to skip the system call restart handling.
|
|
*/
|
|
if (!entryexit && regs->gprs[2] >= NR_syscalls)
|
|
regs->trap = -1;
|
|
|
|
/*
|
|
* this isn't the same as continuing with a signal, but it will do
|
|
* for normal use. strace only continues with a signal if the
|
|
* stopping signal is not SIGTRAP. -brl
|
|
*/
|
|
if (current->exit_code) {
|
|
send_sig(current->exit_code, current, 1);
|
|
current->exit_code = 0;
|
|
}
|
|
out:
|
|
if (unlikely(current->audit_context) && !entryexit)
|
|
audit_syscall_entry(current,
|
|
test_thread_flag(TIF_31BIT)?AUDIT_ARCH_S390:AUDIT_ARCH_S390X,
|
|
regs->gprs[2], regs->orig_gpr2, regs->gprs[3],
|
|
regs->gprs[4], regs->gprs[5]);
|
|
}
|