Andreas Klinger c5bf4a0446 iio: srf08: add sensor type srf10 ... Ultrasonic sensor srf10 is quite similar to srf08 and now also supported by the driver as device tree compatible string. It was necessary to prepare the source for supplementary sensors. This is done by enum srf08_sensor_type. The most significiant difference between srf08 and srf10 is another range and values of register gain (in the driver it's call sensitivity). Therefore the array of it is extended and dependent of the sensor type. Signed-off-by: Andreas Klinger <ak@it-klinger.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2017-08-18 08:01:58 +01:00
..
accel	iio: accel: st_accel: fix data-ready line configuration	2017-08-12 13:46:47 +01:00
adc	iio: adc: select triggered buffer for sama5d2 adc	2017-08-17 15:37:14 +01:00
amplifiers
buffer	iio: buffer-dmaengine: Add missing header buffer_impl.h	2017-06-13 20:56:05 +01:00
chemical	iio: chemical: ccs811: Add support for AMS CCS811 VOC sensor	2017-07-22 21:16:37 +01:00
common	iio: common: st_sensors: move st_sensors_of_i2c_probe() in common code	2017-07-01 10:16:56 +01:00
counter	iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option	2017-03-15 21:59:08 +00:00
dac	iio: dac: stm32: add support for stm32f4	2017-07-15 12:26:26 +01:00
dummy	iio:dummy: Stop enabling timestamp by default.	2017-01-10 19:54:55 +00:00
frequency
gyro	iio: gyro: st_gyro_spi: add OF capability to st_gyro_spi	2017-07-02 10:24:56 +01:00
health	First set of IIO new device support, features and cleanup for the 4.12 cycle.	2017-03-06 13:17:21 +01:00
humidity	iio: humidity: hts221: move drdy enable logic in hts221_trig_set_state()	2017-07-25 20:03:04 +01:00
imu	iio: adis16400: Change unsigned to unsigned int	2017-07-02 10:27:03 +01:00
light	iio: light: rpr0521 triggered buffer	2017-07-04 20:46:28 +01:00
magnetometer	iio: magnetometer: add support to LIS2MDL	2017-08-17 15:51:39 +01:00
multiplexer	iio: multiplexer: new iio category and iio-mux driver	2017-06-03 19:29:26 +09:00
orientation	iio: orientation: hid-sensor-rotation: Drop unnecessary static	2017-07-17 21:45:01 +01:00
potentiometer	iio: max5481: Add support for Maxim digital potentiometers	2017-01-28 12:13:31 +00:00
potentiostat	iio: lmp91000: Set parent device	2017-02-19 12:01:52 +00:00
pressure	iio: pressure: st_pressure: fix drdy configuration for LPS22HB and LPS25H	2017-08-12 13:46:32 +01:00
proximity	iio: srf08: add sensor type srf10	2017-08-18 08:01:58 +01:00
temperature	iio: temperature: tsys01: Add OF match table	2017-07-01 10:16:42 +01:00
trigger	iio: trigger: stm32-timer: add output compare triggers	2017-08-12 13:05:27 +01:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>	2017-03-02 08:42:32 +01:00
industrialio-configfs.c
industrialio-core.c	iio: add hardware triggered operating mode	2017-06-11 15:58:41 +01:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c
industrialio-sw-trigger.c
industrialio-trigger.c	iio: trigger: fix NULL pointer dereference in iio_trigger_write_current()	2017-05-21 12:36:59 +01:00
industrialio-triggered-event.c
inkern.c	First round of IIO new device support, features and cleanups for the 4.14 cycle.	2017-07-27 21:29:49 -07:00
Kconfig	iio: multiplexer: new iio category and iio-mux driver	2017-06-03 19:29:26 +09:00
Makefile	iio: multiplexer: new iio category and iio-mux driver	2017-06-03 19:29:26 +09:00