renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 21:54:06 +08:00
Code
c5bb725ac2
linux-next/drivers/regulator/s2mps11.c
Linus Torvalds 54c72d5987 == Changes to existing drivers == 
- Checkpatch fixes throughout the subsystem
   - Use Regmap to handle IRQs in max77686, extcon-max77693 and mc13xxx-core
   - Use DMA in rtsx_pcr
   - Restrict building on unsupported architectures on timberdale, cs5535
   - SPI hardening in cros_ec_spi
   - More robust error handing in asic3, cros_ec, ab8500-debugfs,
         max77686 and pcf50633-core
   - Reorder PM runtime and regulator handing during shutdown in arizona
   - Enable wakeup in cros_ec_spi
   - Unused variable/code clean-up in pm8921-core, cros_ec, htc-i2cpld,
         tps65912-spi, wm5110-tables and ab8500-debugfs
   - Add regulator handing into suspend() in sec-core
   - Remove pointless wrapper functions in extcon-max77693 and i2c-cros-ec-tunnel
   - Use cross-architecture friendly data sizes in stmpe-i2c, arizona,
         max77686 and tps65910
   - Device Tree documentation updates throughout
   - Provide power management support in max77686
   - Few OF clean-ups in max77686
   - Use manged resources in tps6105x
 
  == New drivers/supported devices ==
   - Add support for s2mpu02 to sec-core
   - Add support for Allwinner A32 to sun6i-prcm
   - Add support for Maxim 77802 in max77686
   - Add support for DA9063 AD in da9063
   - Add new driver for Intel PMICs (generic) and specifically Crystal Cove
 
  == (Re-)moved drivers ==
   - Move out keyboard functionality cros_ec ==> input/keyboard/cros_ec_keyb
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT40p7AAoJEFGvii+H/HdhTo0P/1GuZyvCAJCeqt2oN1gcloIe
 Hgf5rEo/PVPh3T9vHA7GCbWhgtdxfJI8FxrQYvU7Dw5cEMlmvl5p/ZHNPIProv97
 uI59JO67roLpXZP+aYX8BzXcplYkaR/ah16o/ePtaOCwGrXDz+TtJiHEVVN/8bAG
 PWsdcDNBC8byP7BZ/8zFdu6pX4800eRZ0KgeBH+u4k6UDor7M6LkQrxF1hJhU1Bv
 z14Q2wKQufhbcyEtQWcYc6M8hignD1Ioyd4I8mnEJs0EUiABfGUEk/K/G4Z5Q7Sv
 eRIEPZCd1CEBKD5JQcPXyE1QGdG9GiD15PLmctPA4VY1V+9c5/Hoq0TLoxlAQNWA
 gUr7WSqJ+KT2Nch0WVr/MdP8l0jPYfboWbsd/apj4GK0/9quwJNkGUxx0mCdCXyg
 9ylitwUrmlrd4CEKjybfEuTQB52Jvcdq24fnNYHHn1TGppZH6w7LVvdwSW7UcjF0
 Y48hTImYYnVAlWl5lE5xVQTWD/3hseAcoWTsdSORSWJbkCfAhJUg/Gn5bH/Fkwhs
 /aWYPvkF+m47PoudZ9Z8qB5OTO4uz/Q9uEBBf2/k4Yy95vl2IZdy9VqS5tYG67e7
 LLdAZvG5hjEwDi3OwcwGSdZ/kRB5Hgq/YvpqjItle86CKj0ECdAqL/PfqLISgJq9
 x3zSuWMRLcNoyhc2HnBj
 =2cNI
 -----END PGP SIGNATURE-----

Merge tag 'mfd-for-linus-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD update from Lee Jones:
 "Changes to existing drivers:
   - checkpatch fixes throughout the subsystem
   - use Regmap to handle IRQs in max77686, extcon-max77693 and
     mc13xxx-core
   - use DMA in rtsx_pcr
   - restrict building on unsupported architectures on timberdale,
     cs5535
   - SPI hardening in cros_ec_spi
   - more robust error handing in asic3, cros_ec, ab8500-debugfs,
     max77686 and pcf50633-core
   - reorder PM runtime and regulator handing during shutdown in arizona
   - enable wakeup in cros_ec_spi
   - unused variable/code clean-up in pm8921-core, cros_ec, htc-i2cpld,
     tps65912-spi, wm5110-tables and ab8500-debugfs
   - add regulator handing into suspend() in sec-core
   - remove pointless wrapper functions in extcon-max77693 and
     i2c-cros-ec-tunnel
   - use cross-architecture friendly data sizes in stmpe-i2c, arizona,
     max77686 and tps65910
   - devicetree documentation updates throughout
   - provide power management support in max77686
   - few OF clean-ups in max77686
   - use manged resources in tps6105x

  New drivers/supported devices:
   - add support for s2mpu02 to sec-core
   - add support for Allwinner A32 to sun6i-prcm
   - add support for Maxim 77802 in max77686
   - add support for DA9063 AD in da9063
   - new driver for Intel PMICs (generic) and specifically Crystal Cove

  (Re-)moved drivers ==
   - move out keyboard functionality cros_ec ==> input/keyboard/cros_ec_keyb"

* tag 'mfd-for-linus-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (101 commits)
  MAINTAINERS: Update MFD repo location
  mfd: omap-usb-host: Fix improper mask use.
  mfd: arizona: Only free the CTRLIF_ERR IRQ if we requested it
  mfd: arizona: Add missing handling for ISRC3 under/overclocked
  mfd: wm5110: Add new interrupt register definitions
  mfd: arizona: Rename thermal shutdown interrupt
  mfd: wm5110: Add in the output done interrupts
  mfd: wm5110: Remove non-existant interrupts
  mfd: tps65912-spi: Remove unused variable
  mfd: htc-i2cpld: Remove unused code
  mfd: da9063: Add support for AD silicon variant
  mfd: arizona: Map MICVDD from extcon device to the Arizona core
  mfd: arizona: Add MICVDD to mapped regulators for wm8997
  mfd: max77686: Ensure device type IDs are architecture agnostic
  mfd: max77686: Add Maxim 77802 PMIC support
  mfd: tps6105x: Use managed resources when allocating memory
  mfd: wm8997-tables: Suppress 'line over 80 chars' warnings
  mfd: kempld-core: Correct a variety of checkpatch warnings
  mfd: ipaq-micro: Fix coding style errors/warnings reported by checkpatch
  mfd: si476x-cmd: Remedy checkpatch style complains
  ...
2014-08-07 17:17:39 -07:00

1050 lines
31 KiB
C
Raw Blame History

/*
* s2mps11.c
*
* Copyright (c) 2012-2014 Samsung Electronics Co., Ltd
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/bug.h>
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/of_gpio.h>
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/s2mps11.h>
#include <linux/mfd/samsung/s2mps14.h>
#include <linux/mfd/samsung/s2mpu02.h>
struct s2mps11_info {
unsigned int rdev_num;
int ramp_delay2;
int ramp_delay34;
int ramp_delay5;
int ramp_delay16;
int ramp_delay7810;
int ramp_delay9;
enum sec_device_type dev_type;
/*
* One bit for each S2MPS14/S2MPU02 regulator whether the suspend mode
* was enabled.
*/
unsigned long long s2mps14_suspend_state:35;
/* Array of size rdev_num with GPIO-s for external sleep control */
int *ext_control_gpio;
};
static int get_ramp_delay(int ramp_delay)
{
unsigned char cnt = 0;
ramp_delay /= 6250;
while (true) {
ramp_delay = ramp_delay >> 1;
if (ramp_delay == 0)
break;
cnt++;
}
if (cnt > 3)
cnt = 3;
return cnt;
}
static int s2mps11_regulator_set_voltage_time_sel(struct regulator_dev *rdev,
unsigned int old_selector,
unsigned int new_selector)
{
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
unsigned int ramp_delay = 0;
int old_volt, new_volt;
switch (rdev_get_id(rdev)) {
case S2MPS11_BUCK2:
ramp_delay = s2mps11->ramp_delay2;
break;
case S2MPS11_BUCK3:
case S2MPS11_BUCK4:
ramp_delay = s2mps11->ramp_delay34;
break;
case S2MPS11_BUCK5:
ramp_delay = s2mps11->ramp_delay5;
break;
case S2MPS11_BUCK6:
case S2MPS11_BUCK1:
ramp_delay = s2mps11->ramp_delay16;
break;
case S2MPS11_BUCK7:
case S2MPS11_BUCK8:
case S2MPS11_BUCK10:
ramp_delay = s2mps11->ramp_delay7810;
break;
case S2MPS11_BUCK9:
ramp_delay = s2mps11->ramp_delay9;
}
if (ramp_delay == 0)
ramp_delay = rdev->desc->ramp_delay;
old_volt = rdev->desc->min_uV + (rdev->desc->uV_step * old_selector);
new_volt = rdev->desc->min_uV + (rdev->desc->uV_step * new_selector);
return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
}
static int s2mps11_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
unsigned int ramp_val, ramp_shift, ramp_reg = S2MPS11_REG_RAMP_BUCK;
unsigned int ramp_enable = 1, enable_shift = 0;
int ret;
switch (rdev_get_id(rdev)) {
case S2MPS11_BUCK1:
if (ramp_delay > s2mps11->ramp_delay16)
s2mps11->ramp_delay16 = ramp_delay;
else
ramp_delay = s2mps11->ramp_delay16;
ramp_shift = S2MPS11_BUCK16_RAMP_SHIFT;
break;
case S2MPS11_BUCK2:
enable_shift = S2MPS11_BUCK2_RAMP_EN_SHIFT;
if (!ramp_delay) {
ramp_enable = 0;
break;
}
s2mps11->ramp_delay2 = ramp_delay;
ramp_shift = S2MPS11_BUCK2_RAMP_SHIFT;
ramp_reg = S2MPS11_REG_RAMP;
break;
case S2MPS11_BUCK3:
enable_shift = S2MPS11_BUCK3_RAMP_EN_SHIFT;
if (!ramp_delay) {
ramp_enable = 0;
break;
}
if (ramp_delay > s2mps11->ramp_delay34)
s2mps11->ramp_delay34 = ramp_delay;
else
ramp_delay = s2mps11->ramp_delay34;
ramp_shift = S2MPS11_BUCK34_RAMP_SHIFT;
ramp_reg = S2MPS11_REG_RAMP;
break;
case S2MPS11_BUCK4:
enable_shift = S2MPS11_BUCK4_RAMP_EN_SHIFT;
if (!ramp_delay) {
ramp_enable = 0;
break;
}
if (ramp_delay > s2mps11->ramp_delay34)
s2mps11->ramp_delay34 = ramp_delay;
else
ramp_delay = s2mps11->ramp_delay34;
ramp_shift = S2MPS11_BUCK34_RAMP_SHIFT;
ramp_reg = S2MPS11_REG_RAMP;
break;
case S2MPS11_BUCK5:
s2mps11->ramp_delay5 = ramp_delay;
ramp_shift = S2MPS11_BUCK5_RAMP_SHIFT;
break;
case S2MPS11_BUCK6:
enable_shift = S2MPS11_BUCK6_RAMP_EN_SHIFT;
if (!ramp_delay) {
ramp_enable = 0;
break;
}
if (ramp_delay > s2mps11->ramp_delay16)
s2mps11->ramp_delay16 = ramp_delay;
else
ramp_delay = s2mps11->ramp_delay16;
ramp_shift = S2MPS11_BUCK16_RAMP_SHIFT;
break;
case S2MPS11_BUCK7:
case S2MPS11_BUCK8:
case S2MPS11_BUCK10:
if (ramp_delay > s2mps11->ramp_delay7810)
s2mps11->ramp_delay7810 = ramp_delay;
else
ramp_delay = s2mps11->ramp_delay7810;
ramp_shift = S2MPS11_BUCK7810_RAMP_SHIFT;
break;
case S2MPS11_BUCK9:
s2mps11->ramp_delay9 = ramp_delay;
ramp_shift = S2MPS11_BUCK9_RAMP_SHIFT;
break;
default:
return 0;
}
if (!ramp_enable)
goto ramp_disable;
/* Ramp delay can be enabled/disabled only for buck[2346] */
if ((rdev_get_id(rdev) >= S2MPS11_BUCK2 &&
rdev_get_id(rdev) <= S2MPS11_BUCK4) ||
rdev_get_id(rdev) == S2MPS11_BUCK6) {
ret = regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP,
1 << enable_shift, 1 << enable_shift);
if (ret) {
dev_err(&rdev->dev, "failed to enable ramp rate\n");
return ret;
}
}
ramp_val = get_ramp_delay(ramp_delay);
return regmap_update_bits(rdev->regmap, ramp_reg, 0x3 << ramp_shift,
ramp_val << ramp_shift);
ramp_disable:
return regmap_update_bits(rdev->regmap, S2MPS11_REG_RAMP,
1 << enable_shift, 0);
}
static struct regulator_ops s2mps11_ldo_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
};
static struct regulator_ops s2mps11_buck_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = s2mps11_regulator_set_voltage_time_sel,
.set_ramp_delay = s2mps11_set_ramp_delay,
};
#define regulator_desc_s2mps11_ldo1(num) { \
.name = "LDO"#num, \
.id = S2MPS11_LDO##num, \
.ops = &s2mps11_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPS11_LDO_MIN, \
.uV_step = S2MPS11_LDO_STEP1, \
.n_voltages = S2MPS11_LDO_N_VOLTAGES, \
.vsel_reg = S2MPS11_REG_L1CTRL + num - 1, \
.vsel_mask = S2MPS11_LDO_VSEL_MASK, \
.enable_reg = S2MPS11_REG_L1CTRL + num - 1, \
.enable_mask = S2MPS11_ENABLE_MASK \
}
#define regulator_desc_s2mps11_ldo2(num) { \
.name = "LDO"#num, \
.id = S2MPS11_LDO##num, \
.ops = &s2mps11_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPS11_LDO_MIN, \
.uV_step = S2MPS11_LDO_STEP2, \
.n_voltages = S2MPS11_LDO_N_VOLTAGES, \
.vsel_reg = S2MPS11_REG_L1CTRL + num - 1, \
.vsel_mask = S2MPS11_LDO_VSEL_MASK, \
.enable_reg = S2MPS11_REG_L1CTRL + num - 1, \
.enable_mask = S2MPS11_ENABLE_MASK \
}
#define regulator_desc_s2mps11_buck1_4(num) { \
.name = "BUCK"#num, \
.id = S2MPS11_BUCK##num, \
.ops = &s2mps11_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPS11_BUCK_MIN1, \
.uV_step = S2MPS11_BUCK_STEP1, \
.n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPS11_RAMP_DELAY, \
.vsel_reg = S2MPS11_REG_B1CTRL2 + (num - 1) * 2, \
.vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
.enable_reg = S2MPS11_REG_B1CTRL1 + (num - 1) * 2, \
.enable_mask = S2MPS11_ENABLE_MASK \
}
#define regulator_desc_s2mps11_buck5 { \
.name = "BUCK5", \
.id = S2MPS11_BUCK5, \
.ops = &s2mps11_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPS11_BUCK_MIN1, \
.uV_step = S2MPS11_BUCK_STEP1, \
.n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPS11_RAMP_DELAY, \
.vsel_reg = S2MPS11_REG_B5CTRL2, \
.vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
.enable_reg = S2MPS11_REG_B5CTRL1, \
.enable_mask = S2MPS11_ENABLE_MASK \
}
#define regulator_desc_s2mps11_buck6_8(num) { \
.name = "BUCK"#num, \
.id = S2MPS11_BUCK##num, \
.ops = &s2mps11_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPS11_BUCK_MIN1, \
.uV_step = S2MPS11_BUCK_STEP1, \
.n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPS11_RAMP_DELAY, \
.vsel_reg = S2MPS11_REG_B6CTRL2 + (num - 6) * 2, \
.vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
.enable_reg = S2MPS11_REG_B6CTRL1 + (num - 6) * 2, \
.enable_mask = S2MPS11_ENABLE_MASK \
}
#define regulator_desc_s2mps11_buck9 { \
.name = "BUCK9", \
.id = S2MPS11_BUCK9, \
.ops = &s2mps11_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPS11_BUCK_MIN3, \
.uV_step = S2MPS11_BUCK_STEP3, \
.n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPS11_RAMP_DELAY, \
.vsel_reg = S2MPS11_REG_B9CTRL2, \
.vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
.enable_reg = S2MPS11_REG_B9CTRL1, \
.enable_mask = S2MPS11_ENABLE_MASK \
}
#define regulator_desc_s2mps11_buck10 { \
.name = "BUCK10", \
.id = S2MPS11_BUCK10, \
.ops = &s2mps11_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPS11_BUCK_MIN2, \
.uV_step = S2MPS11_BUCK_STEP2, \
.n_voltages = S2MPS11_BUCK_N_VOLTAGES, \
.ramp_delay = S2MPS11_RAMP_DELAY, \
.vsel_reg = S2MPS11_REG_B10CTRL2, \
.vsel_mask = S2MPS11_BUCK_VSEL_MASK, \
.enable_reg = S2MPS11_REG_B10CTRL1, \
.enable_mask = S2MPS11_ENABLE_MASK \
}
static const struct regulator_desc s2mps11_regulators[] = {
regulator_desc_s2mps11_ldo2(1),
regulator_desc_s2mps11_ldo1(2),
regulator_desc_s2mps11_ldo1(3),
regulator_desc_s2mps11_ldo1(4),
regulator_desc_s2mps11_ldo1(5),
regulator_desc_s2mps11_ldo2(6),
regulator_desc_s2mps11_ldo1(7),
regulator_desc_s2mps11_ldo1(8),
regulator_desc_s2mps11_ldo1(9),
regulator_desc_s2mps11_ldo1(10),
regulator_desc_s2mps11_ldo2(11),
regulator_desc_s2mps11_ldo1(12),
regulator_desc_s2mps11_ldo1(13),
regulator_desc_s2mps11_ldo1(14),
regulator_desc_s2mps11_ldo1(15),
regulator_desc_s2mps11_ldo1(16),
regulator_desc_s2mps11_ldo1(17),
regulator_desc_s2mps11_ldo1(18),
regulator_desc_s2mps11_ldo1(19),
regulator_desc_s2mps11_ldo1(20),
regulator_desc_s2mps11_ldo1(21),
regulator_desc_s2mps11_ldo2(22),
regulator_desc_s2mps11_ldo2(23),
regulator_desc_s2mps11_ldo1(24),
regulator_desc_s2mps11_ldo1(25),
regulator_desc_s2mps11_ldo1(26),
regulator_desc_s2mps11_ldo2(27),
regulator_desc_s2mps11_ldo1(28),
regulator_desc_s2mps11_ldo1(29),
regulator_desc_s2mps11_ldo1(30),
regulator_desc_s2mps11_ldo1(31),
regulator_desc_s2mps11_ldo1(32),
regulator_desc_s2mps11_ldo1(33),
regulator_desc_s2mps11_ldo1(34),
regulator_desc_s2mps11_ldo1(35),
regulator_desc_s2mps11_ldo1(36),
regulator_desc_s2mps11_ldo1(37),
regulator_desc_s2mps11_ldo1(38),
regulator_desc_s2mps11_buck1_4(1),
regulator_desc_s2mps11_buck1_4(2),
regulator_desc_s2mps11_buck1_4(3),
regulator_desc_s2mps11_buck1_4(4),
regulator_desc_s2mps11_buck5,
regulator_desc_s2mps11_buck6_8(6),
regulator_desc_s2mps11_buck6_8(7),
regulator_desc_s2mps11_buck6_8(8),
regulator_desc_s2mps11_buck9,
regulator_desc_s2mps11_buck10,
};
static int s2mps14_regulator_enable(struct regulator_dev *rdev)
{
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
unsigned int val;
switch (s2mps11->dev_type) {
case S2MPS14X:
if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
val = S2MPS14_ENABLE_SUSPEND;
else if (gpio_is_valid(s2mps11->ext_control_gpio[rdev_get_id(rdev)]))
val = S2MPS14_ENABLE_EXT_CONTROL;
else
val = rdev->desc->enable_mask;
break;
case S2MPU02:
if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
val = S2MPU02_ENABLE_SUSPEND;
else
val = rdev->desc->enable_mask;
break;
default:
return -EINVAL;
};
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask, val);
}
static int s2mps14_regulator_set_suspend_disable(struct regulator_dev *rdev)
{
int ret;
unsigned int val, state;
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
int rdev_id = rdev_get_id(rdev);
/* Below LDO should be always on or does not support suspend mode. */
switch (s2mps11->dev_type) {
case S2MPS14X:
switch (rdev_id) {
case S2MPS14_LDO3:
return 0;
default:
state = S2MPS14_ENABLE_SUSPEND;
break;
};
break;
case S2MPU02:
switch (rdev_id) {
case S2MPU02_LDO13:
case S2MPU02_LDO14:
case S2MPU02_LDO15:
case S2MPU02_LDO17:
case S2MPU02_BUCK7:
state = S2MPU02_DISABLE_SUSPEND;
break;
default:
state = S2MPU02_ENABLE_SUSPEND;
break;
};
break;
default:
return -EINVAL;
};
ret = regmap_read(rdev->regmap, rdev->desc->enable_reg, &val);
if (ret < 0)
return ret;
s2mps11->s2mps14_suspend_state |= (1 << rdev_get_id(rdev));
/*
* Don't enable suspend mode if regulator is already disabled because
* this would effectively for a short time turn on the regulator after
* resuming.
* However we still want to toggle the suspend_state bit for regulator
* in case if it got enabled before suspending the system.
*/
if (!(val & rdev->desc->enable_mask))
return 0;
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask, state);
}
static struct regulator_ops s2mps14_reg_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
.enable = s2mps14_regulator_enable,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_suspend_disable = s2mps14_regulator_set_suspend_disable,
};
#define regulator_desc_s2mps14_ldo1(num) { \
.name = "LDO"#num, \
.id = S2MPS14_LDO##num, \
.ops = &s2mps14_reg_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPS14_LDO_MIN_800MV, \
.uV_step = S2MPS14_LDO_STEP_25MV, \
.n_voltages = S2MPS14_LDO_N_VOLTAGES, \
.vsel_reg = S2MPS14_REG_L1CTRL + num - 1, \
.vsel_mask = S2MPS14_LDO_VSEL_MASK, \
.enable_reg = S2MPS14_REG_L1CTRL + num - 1, \
.enable_mask = S2MPS14_ENABLE_MASK \
}
#define regulator_desc_s2mps14_ldo2(num) { \
.name = "LDO"#num, \
.id = S2MPS14_LDO##num, \
.ops = &s2mps14_reg_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPS14_LDO_MIN_1800MV, \
.uV_step = S2MPS14_LDO_STEP_25MV, \
.n_voltages = S2MPS14_LDO_N_VOLTAGES, \
.vsel_reg = S2MPS14_REG_L1CTRL + num - 1, \
.vsel_mask = S2MPS14_LDO_VSEL_MASK, \
.enable_reg = S2MPS14_REG_L1CTRL + num - 1, \
.enable_mask = S2MPS14_ENABLE_MASK \
}
#define regulator_desc_s2mps14_ldo3(num) { \
.name = "LDO"#num, \
.id = S2MPS14_LDO##num, \
.ops = &s2mps14_reg_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPS14_LDO_MIN_800MV, \
.uV_step = S2MPS14_LDO_STEP_12_5MV, \
.n_voltages = S2MPS14_LDO_N_VOLTAGES, \
.vsel_reg = S2MPS14_REG_L1CTRL + num - 1, \
.vsel_mask = S2MPS14_LDO_VSEL_MASK, \
.enable_reg = S2MPS14_REG_L1CTRL + num - 1, \
.enable_mask = S2MPS14_ENABLE_MASK \
}
#define regulator_desc_s2mps14_buck1235(num) { \
.name = "BUCK"#num, \
.id = S2MPS14_BUCK##num, \
.ops = &s2mps14_reg_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPS14_BUCK1235_MIN_600MV, \
.uV_step = S2MPS14_BUCK1235_STEP_6_25MV, \
.n_voltages = S2MPS14_BUCK_N_VOLTAGES, \
.linear_min_sel = S2MPS14_BUCK1235_START_SEL, \
.ramp_delay = S2MPS14_BUCK_RAMP_DELAY, \
.vsel_reg = S2MPS14_REG_B1CTRL2 + (num - 1) * 2, \
.vsel_mask = S2MPS14_BUCK_VSEL_MASK, \
.enable_reg = S2MPS14_REG_B1CTRL1 + (num - 1) * 2, \
.enable_mask = S2MPS14_ENABLE_MASK \
}
#define regulator_desc_s2mps14_buck4(num) { \
.name = "BUCK"#num, \
.id = S2MPS14_BUCK##num, \
.ops = &s2mps14_reg_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPS14_BUCK4_MIN_1400MV, \
.uV_step = S2MPS14_BUCK4_STEP_12_5MV, \
.n_voltages = S2MPS14_BUCK_N_VOLTAGES, \
.linear_min_sel = S2MPS14_BUCK4_START_SEL, \
.ramp_delay = S2MPS14_BUCK_RAMP_DELAY, \
.vsel_reg = S2MPS14_REG_B1CTRL2 + (num - 1) * 2, \
.vsel_mask = S2MPS14_BUCK_VSEL_MASK, \
.enable_reg = S2MPS14_REG_B1CTRL1 + (num - 1) * 2, \
.enable_mask = S2MPS14_ENABLE_MASK \
}
static const struct regulator_desc s2mps14_regulators[] = {
regulator_desc_s2mps14_ldo3(1),
regulator_desc_s2mps14_ldo3(2),
regulator_desc_s2mps14_ldo1(3),
regulator_desc_s2mps14_ldo1(4),
regulator_desc_s2mps14_ldo3(5),
regulator_desc_s2mps14_ldo3(6),
regulator_desc_s2mps14_ldo1(7),
regulator_desc_s2mps14_ldo2(8),
regulator_desc_s2mps14_ldo3(9),
regulator_desc_s2mps14_ldo3(10),
regulator_desc_s2mps14_ldo1(11),
regulator_desc_s2mps14_ldo2(12),
regulator_desc_s2mps14_ldo2(13),
regulator_desc_s2mps14_ldo2(14),
regulator_desc_s2mps14_ldo2(15),
regulator_desc_s2mps14_ldo2(16),
regulator_desc_s2mps14_ldo2(17),
regulator_desc_s2mps14_ldo2(18),
regulator_desc_s2mps14_ldo1(19),
regulator_desc_s2mps14_ldo1(20),
regulator_desc_s2mps14_ldo1(21),
regulator_desc_s2mps14_ldo3(22),
regulator_desc_s2mps14_ldo1(23),
regulator_desc_s2mps14_ldo2(24),
regulator_desc_s2mps14_ldo2(25),
regulator_desc_s2mps14_buck1235(1),
regulator_desc_s2mps14_buck1235(2),
regulator_desc_s2mps14_buck1235(3),
regulator_desc_s2mps14_buck4(4),
regulator_desc_s2mps14_buck1235(5),
};
static int s2mps14_pmic_enable_ext_control(struct s2mps11_info *s2mps11,
struct regulator_dev *rdev)
{
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask, S2MPS14_ENABLE_EXT_CONTROL);
}
static void s2mps14_pmic_dt_parse_ext_control_gpio(struct platform_device *pdev,
struct of_regulator_match *rdata, struct s2mps11_info *s2mps11)
{
int *gpio = s2mps11->ext_control_gpio;
unsigned int i;
unsigned int valid_regulators[3] = { S2MPS14_LDO10, S2MPS14_LDO11,
S2MPS14_LDO12 };
for (i = 0; i < ARRAY_SIZE(valid_regulators); i++) {
unsigned int reg = valid_regulators[i];
if (!rdata[reg].init_data || !rdata[reg].of_node)
continue;
gpio[reg] = of_get_named_gpio(rdata[reg].of_node,
"samsung,ext-control-gpios", 0);
if (gpio_is_valid(gpio[reg]))
dev_dbg(&pdev->dev, "Using GPIO %d for ext-control over %d/%s\n",
gpio[reg], reg, rdata[reg].name);
}
}
static int s2mps11_pmic_dt_parse(struct platform_device *pdev,
struct of_regulator_match *rdata, struct s2mps11_info *s2mps11)
{
struct device_node *reg_np;
reg_np = of_get_child_by_name(pdev->dev.parent->of_node, "regulators");
if (!reg_np) {
dev_err(&pdev->dev, "could not find regulators sub-node\n");
return -EINVAL;
}
of_regulator_match(&pdev->dev, reg_np, rdata, s2mps11->rdev_num);
if (s2mps11->dev_type == S2MPS14X)
s2mps14_pmic_dt_parse_ext_control_gpio(pdev, rdata, s2mps11);
of_node_put(reg_np);
return 0;
}
static int s2mpu02_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
{
unsigned int ramp_val, ramp_shift, ramp_reg;
switch (rdev_get_id(rdev)) {
case S2MPU02_BUCK1:
ramp_shift = S2MPU02_BUCK1_RAMP_SHIFT;
break;
case S2MPU02_BUCK2:
ramp_shift = S2MPU02_BUCK2_RAMP_SHIFT;
break;
case S2MPU02_BUCK3:
ramp_shift = S2MPU02_BUCK3_RAMP_SHIFT;
break;
case S2MPU02_BUCK4:
ramp_shift = S2MPU02_BUCK4_RAMP_SHIFT;
break;
default:
return 0;
}
ramp_reg = S2MPU02_REG_RAMP1;
ramp_val = get_ramp_delay(ramp_delay);
return regmap_update_bits(rdev->regmap, ramp_reg,
S2MPU02_BUCK1234_RAMP_MASK << ramp_shift,
ramp_val << ramp_shift);
}
static struct regulator_ops s2mpu02_ldo_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
.enable = s2mps14_regulator_enable,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_suspend_disable = s2mps14_regulator_set_suspend_disable,
};
static struct regulator_ops s2mpu02_buck_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.is_enabled = regulator_is_enabled_regmap,
.enable = s2mps14_regulator_enable,
.disable = regulator_disable_regmap,
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_suspend_disable = s2mps14_regulator_set_suspend_disable,
.set_ramp_delay = s2mpu02_set_ramp_delay,
};
#define regulator_desc_s2mpu02_ldo1(num) { \
.name = "LDO"#num, \
.id = S2MPU02_LDO##num, \
.ops = &s2mpu02_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPU02_LDO_MIN_900MV, \
.uV_step = S2MPU02_LDO_STEP_12_5MV, \
.linear_min_sel = S2MPU02_LDO_GROUP1_START_SEL, \
.n_voltages = S2MPU02_LDO_N_VOLTAGES, \
.vsel_reg = S2MPU02_REG_L1CTRL, \
.vsel_mask = S2MPU02_LDO_VSEL_MASK, \
.enable_reg = S2MPU02_REG_L1CTRL, \
.enable_mask = S2MPU02_ENABLE_MASK \
}
#define regulator_desc_s2mpu02_ldo2(num) { \
.name = "LDO"#num, \
.id = S2MPU02_LDO##num, \
.ops = &s2mpu02_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPU02_LDO_MIN_1050MV, \
.uV_step = S2MPU02_LDO_STEP_25MV, \
.linear_min_sel = S2MPU02_LDO_GROUP2_START_SEL, \
.n_voltages = S2MPU02_LDO_N_VOLTAGES, \
.vsel_reg = S2MPU02_REG_L2CTRL1, \
.vsel_mask = S2MPU02_LDO_VSEL_MASK, \
.enable_reg = S2MPU02_REG_L2CTRL1, \
.enable_mask = S2MPU02_ENABLE_MASK \
}
#define regulator_desc_s2mpu02_ldo3(num) { \
.name = "LDO"#num, \
.id = S2MPU02_LDO##num, \
.ops = &s2mpu02_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPU02_LDO_MIN_900MV, \
.uV_step = S2MPU02_LDO_STEP_12_5MV, \
.linear_min_sel = S2MPU02_LDO_GROUP1_START_SEL, \
.n_voltages = S2MPU02_LDO_N_VOLTAGES, \
.vsel_reg = S2MPU02_REG_L3CTRL + num - 3, \
.vsel_mask = S2MPU02_LDO_VSEL_MASK, \
.enable_reg = S2MPU02_REG_L3CTRL + num - 3, \
.enable_mask = S2MPU02_ENABLE_MASK \
}
#define regulator_desc_s2mpu02_ldo4(num) { \
.name = "LDO"#num, \
.id = S2MPU02_LDO##num, \
.ops = &s2mpu02_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPU02_LDO_MIN_1050MV, \
.uV_step = S2MPU02_LDO_STEP_25MV, \
.linear_min_sel = S2MPU02_LDO_GROUP2_START_SEL, \
.n_voltages = S2MPU02_LDO_N_VOLTAGES, \
.vsel_reg = S2MPU02_REG_L3CTRL + num - 3, \
.vsel_mask = S2MPU02_LDO_VSEL_MASK, \
.enable_reg = S2MPU02_REG_L3CTRL + num - 3, \
.enable_mask = S2MPU02_ENABLE_MASK \
}
#define regulator_desc_s2mpu02_ldo5(num) { \
.name = "LDO"#num, \
.id = S2MPU02_LDO##num, \
.ops = &s2mpu02_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPU02_LDO_MIN_1600MV, \
.uV_step = S2MPU02_LDO_STEP_50MV, \
.linear_min_sel = S2MPU02_LDO_GROUP3_START_SEL, \
.n_voltages = S2MPU02_LDO_N_VOLTAGES, \
.vsel_reg = S2MPU02_REG_L3CTRL + num - 3, \
.vsel_mask = S2MPU02_LDO_VSEL_MASK, \
.enable_reg = S2MPU02_REG_L3CTRL + num - 3, \
.enable_mask = S2MPU02_ENABLE_MASK \
}
#define regulator_desc_s2mpu02_buck1234(num) { \
.name = "BUCK"#num, \
.id = S2MPU02_BUCK##num, \
.ops = &s2mpu02_buck_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPU02_BUCK1234_MIN_600MV, \
.uV_step = S2MPU02_BUCK1234_STEP_6_25MV, \
.n_voltages = S2MPU02_BUCK_N_VOLTAGES, \
.linear_min_sel = S2MPU02_BUCK1234_START_SEL, \
.ramp_delay = S2MPU02_BUCK_RAMP_DELAY, \
.vsel_reg = S2MPU02_REG_B1CTRL2 + (num - 1) * 2, \
.vsel_mask = S2MPU02_BUCK_VSEL_MASK, \
.enable_reg = S2MPU02_REG_B1CTRL1 + (num - 1) * 2, \
.enable_mask = S2MPU02_ENABLE_MASK \
}
#define regulator_desc_s2mpu02_buck5(num) { \
.name = "BUCK"#num, \
.id = S2MPU02_BUCK##num, \
.ops = &s2mpu02_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPU02_BUCK5_MIN_1081_25MV, \
.uV_step = S2MPU02_BUCK5_STEP_6_25MV, \
.n_voltages = S2MPU02_BUCK_N_VOLTAGES, \
.linear_min_sel = S2MPU02_BUCK5_START_SEL, \
.ramp_delay = S2MPU02_BUCK_RAMP_DELAY, \
.vsel_reg = S2MPU02_REG_B5CTRL2, \
.vsel_mask = S2MPU02_BUCK_VSEL_MASK, \
.enable_reg = S2MPU02_REG_B5CTRL1, \
.enable_mask = S2MPU02_ENABLE_MASK \
}
#define regulator_desc_s2mpu02_buck6(num) { \
.name = "BUCK"#num, \
.id = S2MPU02_BUCK##num, \
.ops = &s2mpu02_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPU02_BUCK6_MIN_1700MV, \
.uV_step = S2MPU02_BUCK6_STEP_2_50MV, \
.n_voltages = S2MPU02_BUCK_N_VOLTAGES, \
.linear_min_sel = S2MPU02_BUCK6_START_SEL, \
.ramp_delay = S2MPU02_BUCK_RAMP_DELAY, \
.vsel_reg = S2MPU02_REG_B6CTRL2, \
.vsel_mask = S2MPU02_BUCK_VSEL_MASK, \
.enable_reg = S2MPU02_REG_B6CTRL1, \
.enable_mask = S2MPU02_ENABLE_MASK \
}
#define regulator_desc_s2mpu02_buck7(num) { \
.name = "BUCK"#num, \
.id = S2MPU02_BUCK##num, \
.ops = &s2mpu02_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = S2MPU02_BUCK7_MIN_900MV, \
.uV_step = S2MPU02_BUCK7_STEP_6_25MV, \
.n_voltages = S2MPU02_BUCK_N_VOLTAGES, \
.linear_min_sel = S2MPU02_BUCK7_START_SEL, \
.ramp_delay = S2MPU02_BUCK_RAMP_DELAY, \
.vsel_reg = S2MPU02_REG_B7CTRL2, \
.vsel_mask = S2MPU02_BUCK_VSEL_MASK, \
.enable_reg = S2MPU02_REG_B7CTRL1, \
.enable_mask = S2MPU02_ENABLE_MASK \
}
static const struct regulator_desc s2mpu02_regulators[] = {
regulator_desc_s2mpu02_ldo1(1),
regulator_desc_s2mpu02_ldo2(2),
regulator_desc_s2mpu02_ldo4(3),
regulator_desc_s2mpu02_ldo5(4),
regulator_desc_s2mpu02_ldo4(5),
regulator_desc_s2mpu02_ldo3(6),
regulator_desc_s2mpu02_ldo3(7),
regulator_desc_s2mpu02_ldo4(8),
regulator_desc_s2mpu02_ldo5(9),
regulator_desc_s2mpu02_ldo3(10),
regulator_desc_s2mpu02_ldo4(11),
regulator_desc_s2mpu02_ldo5(12),
regulator_desc_s2mpu02_ldo5(13),
regulator_desc_s2mpu02_ldo5(14),
regulator_desc_s2mpu02_ldo5(15),
regulator_desc_s2mpu02_ldo5(16),
regulator_desc_s2mpu02_ldo4(17),
regulator_desc_s2mpu02_ldo5(18),
regulator_desc_s2mpu02_ldo3(19),
regulator_desc_s2mpu02_ldo4(20),
regulator_desc_s2mpu02_ldo5(21),
regulator_desc_s2mpu02_ldo5(22),
regulator_desc_s2mpu02_ldo5(23),
regulator_desc_s2mpu02_ldo4(24),
regulator_desc_s2mpu02_ldo5(25),
regulator_desc_s2mpu02_ldo4(26),
regulator_desc_s2mpu02_ldo5(27),
regulator_desc_s2mpu02_ldo5(28),
regulator_desc_s2mpu02_buck1234(1),
regulator_desc_s2mpu02_buck1234(2),
regulator_desc_s2mpu02_buck1234(3),
regulator_desc_s2mpu02_buck1234(4),
regulator_desc_s2mpu02_buck5(5),
regulator_desc_s2mpu02_buck6(6),
regulator_desc_s2mpu02_buck7(7),
};
static int s2mps11_pmic_probe(struct platform_device *pdev)
{
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct sec_platform_data *pdata = NULL;
struct of_regulator_match *rdata = NULL;
struct regulator_config config = { };
struct s2mps11_info *s2mps11;
int i, ret = 0;
const struct regulator_desc *regulators;
s2mps11 = devm_kzalloc(&pdev->dev, sizeof(struct s2mps11_info),
GFP_KERNEL);
if (!s2mps11)
return -ENOMEM;
s2mps11->dev_type = platform_get_device_id(pdev)->driver_data;
switch (s2mps11->dev_type) {
case S2MPS11X:
s2mps11->rdev_num = ARRAY_SIZE(s2mps11_regulators);
regulators = s2mps11_regulators;
break;
case S2MPS14X:
s2mps11->rdev_num = ARRAY_SIZE(s2mps14_regulators);
regulators = s2mps14_regulators;
break;
case S2MPU02:
s2mps11->rdev_num = ARRAY_SIZE(s2mpu02_regulators);
regulators = s2mpu02_regulators;
break;
default:
dev_err(&pdev->dev, "Invalid device type: %u\n",
s2mps11->dev_type);
return -EINVAL;
};
s2mps11->ext_control_gpio = devm_kzalloc(&pdev->dev,
sizeof(*s2mps11->ext_control_gpio) * s2mps11->rdev_num,
GFP_KERNEL);
if (!s2mps11->ext_control_gpio)
return -ENOMEM;
/*
* 0 is a valid GPIO so initialize all GPIO-s to negative value
* to indicate that external control won't be used for this regulator.
*/
for (i = 0; i < s2mps11->rdev_num; i++)
s2mps11->ext_control_gpio[i] = -EINVAL;
if (!iodev->dev->of_node) {
if (iodev->pdata) {
pdata = iodev->pdata;
goto common_reg;
} else {
dev_err(pdev->dev.parent,
"Platform data or DT node not supplied\n");
return -ENODEV;
}
}
rdata = kzalloc(sizeof(*rdata) * s2mps11->rdev_num, GFP_KERNEL);
if (!rdata)
return -ENOMEM;
for (i = 0; i < s2mps11->rdev_num; i++)
rdata[i].name = regulators[i].name;
ret = s2mps11_pmic_dt_parse(pdev, rdata, s2mps11);
if (ret)
goto out;
common_reg:
platform_set_drvdata(pdev, s2mps11);
config.dev = &pdev->dev;
config.regmap = iodev->regmap_pmic;
config.driver_data = s2mps11;
config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
for (i = 0; i < s2mps11->rdev_num; i++) {
struct regulator_dev *regulator;
if (pdata) {
config.init_data = pdata->regulators[i].initdata;
config.of_node = pdata->regulators[i].reg_node;
} else {
config.init_data = rdata[i].init_data;
config.of_node = rdata[i].of_node;
}
config.ena_gpio = s2mps11->ext_control_gpio[i];
regulator = devm_regulator_register(&pdev->dev,
&regulators[i], &config);
if (IS_ERR(regulator)) {
ret = PTR_ERR(regulator);
dev_err(&pdev->dev, "regulator init failed for %d\n",
i);
goto out;
}
if (gpio_is_valid(s2mps11->ext_control_gpio[i])) {
ret = s2mps14_pmic_enable_ext_control(s2mps11,
regulator);
if (ret < 0) {
dev_err(&pdev->dev,
"failed to enable GPIO control over %s: %d\n",
regulator->desc->name, ret);
goto out;
}
}
}
out:
kfree(rdata);
return ret;
}
static const struct platform_device_id s2mps11_pmic_id[] = {
{ "s2mps11-pmic", S2MPS11X},
{ "s2mps14-pmic", S2MPS14X},
{ "s2mpu02-pmic", S2MPU02},
{ },
};
MODULE_DEVICE_TABLE(platform, s2mps11_pmic_id);
static struct platform_driver s2mps11_pmic_driver = {
.driver = {
.name = "s2mps11-pmic",
.owner = THIS_MODULE,
},
.probe = s2mps11_pmic_probe,
.id_table = s2mps11_pmic_id,
};
static int __init s2mps11_pmic_init(void)
{
return platform_driver_register(&s2mps11_pmic_driver);
}
subsys_initcall(s2mps11_pmic_init);
static void __exit s2mps11_pmic_exit(void)
{
platform_driver_unregister(&s2mps11_pmic_driver);
}
module_exit(s2mps11_pmic_exit);
/* Module information */
MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
MODULE_DESCRIPTION("SAMSUNG S2MPS11/S2MPS14/S2MPU02 Regulator Driver");
MODULE_LICENSE("GPL");
View Git Blame Copy Permalink