2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 21:24:00 +08:00
linux-next/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi
Simon Baatz a649277e79 arm: kirkwood: sheevaplug: move pinmux configs to the right devices
When the pinmux mechanism was added in Kirkwood, the device driver
core was not yet providing the possibility of attaching pinmux
configurations to all devices, drivers had to do it explicitly, and
not all drivers were doing this.

Now that the driver core does that in a generic way, it makes sense to
attach the pinmux configuration to their corresponding devices.

Signed-off-by: Simon Baatz <gmbnomis@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-05 15:01:54 +00:00

94 lines
1.8 KiB
Plaintext

/*
* kirkwood-sheevaplug-common.dts - Common parts for Sheevaplugs
*
* Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com>
*
* Licensed under GPLv2
*/
/include/ "kirkwood.dtsi"
/include/ "kirkwood-6281.dtsi"
/ {
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pmx_usb_power_enable: pmx-usb-power-enable {
marvell,pins = "mpp29";
marvell,function = "gpio";
};
pmx_led_red: pmx-led-red {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_led_blue: pmx-led-blue {
marvell,pins = "mpp49";
marvell,function = "gpio";
};
pmx_sdio_cd: pmx-sdio-cd {
marvell,pins = "mpp44";
marvell,function = "gpio";
};
pmx_sdio_wp: pmx-sdio-wp {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
};
serial@12000 {
pinctrl-0 = <&pmx_uart0>;
pinctrl-names = "default";
status = "okay";
};
nand@3000000 {
pinctrl-0 = <&pmx_nand>;
pinctrl-names = "default";
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
};
partition@100000 {
label = "uImage";
reg = <0x0100000 0x400000>;
};
partition@500000 {
label = "root";
reg = <0x0500000 0x1fb00000>;
};
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_usb_power_enable>;
pinctrl-names = "default";
usb_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "USB Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio0 29 0>;
};
};
};